dim screen and need help.

Similar Questions

• Sansa clip cracked screen and need help turning repeat stop

  My screen is cracked and I can not afford a new mp3. Unfortunately, it's the repeat mode 1 song when he cracked.  I just need a procedure step by step to how to repeat offshore.  I don't see any of my screen. I would also like to know how I could put it on playall instead of just a song mode.  I tried to reset it but it doesn't work. I'll be away from my own computer for a few months, so I would rather not format because I lose my original songs that I have on this subject.  I also have an audio book on it then a procedure step by step on access which will be useful also.

  Hmmm I don't know how useful it will be: do you see anything on the screen?

  My version of firmware on the clip is: 01.01.30a

  Starting point:   When I turn on my video it automatically starts playing my last song and obeys the shuffle / repeat options.

  By pressing the menu key small I will be positioned on the music

  Music (headphone icon) ... If I click the bottom , I get the following menus:

  FM radio

  Voice

  Parameters

  Music (back to music again)

  If I click Select on the music , I get the following features:

  Play all

  artists

  Albums

  Songs

  Kind

  My best rated

  Playlists

  Podcasts

  Audio books

  records

  Music options

  Play at all (and back to play at all)

  If I'm playing together and the song: each arrow pointing down will give you the following:

  Back to the list of music

  Add song to Golist

  Rate song

  Shuffle (stop / market)

  Repeat (All, Off, song) *.

  Music EQ

  Clear Golist

  Delete the song

  Back to the list of music (then return to the list of music once again)

  If in this menu, I click on the right arrow on repeat * for every time I press the right arrow key, I turn the 3 following options

  All the

  Off

  Song

  Allows you to start with the Clip off: so: If your clip is on... turn it off...

  If your clip is now disabled, start by putting on:

  then click on the small menu button

  then click Select

  then click Select again to play all the music

  Wait a few seconds and the songs should begin to play.   or if its on UN-pause pause, there click on place

  To change the repeat function: while playing a song...

  Click Select

  click the bottom 5 times

  then to change click on repeat right options will be all out, song and start over with all, off, again song.    This will start with whatever the currently set option.

  So if his game to repeat the song. click on the right change to repeat all, right click to change to repeat Off

  Click Select = the middle button on wheel

  Hope this helps, reply back if it did.   and I'll look audio books, the next time or someone else could

• 0 x 00000076 blue screen and need help

  OK im a little new to how computers work so sorry if it's really dumbed down in the way that I ask the question. for a while I get the blue screen on my computer every time that I stop/restart my computer. It happens then, or when I disconnect my controller ps3 usb port. After that the computer shuts down (then I let restart after clicking on "run windows as usual") I am advised that its 0 x 00000076. idk about this subject, but its kinda that prevents me to update anything on my computer cause the computer may not restart and install things properly. can I do to solve this problem? im a little tired of always see this pop up on my computer.

  Make and model: HP, m9715f

  processor AMD phenom 9650 quad-core

  Vista 64-bit.
  This is the link to my public folder that has both the pop-up view pilot and my minidump file that I copied from my computer.
  https://SkyDrive.live.com/#CID=6995B90848EEA52B
  Here is the link with the file system information.
  https://SkyDrive.live.com/redir?RESID=6995B90848EEA52B! 110
  I understand that it shows my video card in need of update, but I had this problem before even update video card. I understand that I need to update my computer but the problem is when I go to update and it restarts, it hangs and when restarts until... He forgets the update so it's a tiny cycle... I update > locks > still need to update...
  Please anyhelp will be amazing.

  Adam

  It's all driver problems called "locked pages.  This means a driver (gut feeling it's your Symantec) has not properly freed from his memory.

  I would like to remove and replace Symantec with MSE at LEAST TO TEST

  Symantec is a common cause of BSOD.  I remove and replace it with Microsoft Security Essentials at LEAST FOR TESTER

  http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20080710133834EN

  http://www.Microsoft.com/security_essentials/

  Pilots who need update
  AtiPcie.sys Mon Nov 6 11:59:54 2006 (454F6A0A)
  ATI PCIE driver for chipset ATI PCIE or ATI PCI Express (3GIO) Filter [br] found in my ATI video drivers (I have an Intel chipset)
  http://www.carrona.org/drivers/driver.php?id=AtiPcie.sys
   
  Alpham264.sys Mar Mar 20 05:51:03 2007 (45FFAE87)
  Ideazon ZBoard/Ideazon Fang MM USB HID Driver
  http://www.carrona.org/drivers/driver.php?id=Alpham264.sys
   
  Alpham164.sys Monday, July 23, 03:57:03 2007 (46A45F4F)
  Ideazon ZBoard/Ideazon ZBoard Fang MM USB - HID
  http://www.carrona.org/drivers/driver.php?id=Alpham164.sys
   
  USBCIR.sys Sat Jan 19 01:34:01 (479199 9) 2008
  ENE USB Consumer IR Driver for eHome
  http://www.carrona.org/drivers/driver.php?id=USBCIR.sys
   
  netr7364.sys kills Feb 26 04:17:59 2008 (47C3D947)
  RALink RT2501/RT2573/T2601/RT2671 Wireless Adapter (you can have another manufacturer)
  http://www.carrona.org/drivers/driver.php?id=netr7364.sys
   
  usbfilter.sys Wednesday, may 28, 18:54:15 2008 (483DE297)
  AMD USB Filter Driver (probably part of the chipset drivers)
  http://www.carrona.org/drivers/driver.php?id=usbfilter.sys

  Since Beepapp.exe isn't a pilot running and you do not have promises RAIDXpert, I ran Malwarebytes just to be sure

  BeepApp.exe is known as BeepApp of promise for HBA , it also bears the name following RAIDXpert event Notifier and it is developed by Promise Technology INC.

  Please download the free version of Malwarebytes.
  Update immediately.
  Do a full scan of the system
  Let us know the results at the end.

  http://www.Malwarebytes.org/products

• iCloud want to remove my iphone 5 but I can't not leave me with my e-mail password and need help

  iCloud want to remove my iphone 5 but I can't not leave me with my e-mail password and need help

  Welcome to the Apple community.

  If you don't remember the password, reset it to...

  iForgot.com

• I bought ADobe Acrobat XI Standard previously. My computer has been changed and I have lost the need to reinstall. Were unsuccessfule and need help

  I bought Adobe Acrobat XI Standard previously. My computer has been changed and I have lost the need to reinstall. Have failed and need help. My serial number does not work.

  Hi Dean,

  Please refer to the KB Doc:https://helpx.adobe.com/creative-suite/kb/error-serial-number-qualifying-product.html

  Kind regards
  Rave

• Adobe muse working on a menu lighbox and need help I can not the box of active relaxation, even if I checked trigger on top

  Adobe muse work on a menu lighbox and need help I can not the box of active relaxation, even if I checked trigger on top anyone with a suggestion?

  Thank you, it ends up being a superposition problem, thank you, but I can see where an invisible element could be a problem too. I use to select it all the trick to understand where I've been in Illustrator all time years ago I am so new Muse that I kept thinking can be as simple as I can go back to things I've done in other Adobe programs, but it is! and I'm an old school Print Designer who doesn't REALLY know the thing no coding thank once again

• Does anyone know an Adobe phone number to call us? We meet a wide range of problems and need help.

  Does anyone know an Adobe phone number to call us? We meet a wide range of problems and need help.

  800-833-6687 (the only one from 05:00 - 19:00 PST, Monday to Friday day US).

  Phone support | Orders, returns, exchanges
  http://helpx.Adobe.com/x-productkb/global/phone-support-orders.html

  To the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN )

• I need assistance in the import of certain vectors, watercolor color chart and other creative market (step by step instructions).  Im a newbie to Illustrator and need help.

  I need assistance in the import of certain vectors, watercolor color chart and other creative market (step by step instructions).  Im a newbie to Illustrator and need help.

  Should be the subject of the file > open.  After the download.  The swatches will come with the file.

• Computer laptop touch screen 15: need help - restore Partitions, OS system, start-up and drivers!

  [Need help]

  Device name: laptop touch screen, Energy Star, 15.

  Model number: 15 - f023wm

  Device status:
  [Grandma] "I broke the internet.
  [Me] "No, I have demolished just any chance I had as a computer programmer.
  I'll never do it to heaven now... »

  You want to come: difficulty this laptop!

  -Packing plant (Reset/retrieve)

  -Retrieve/Re-restore boot loader

  Retrieve/recreate/Re-restore all original scores.
  -Retrieve / Re - restore all the Original system & hardware drivers.

  -Retrieve/Re-restore Windows 8.1.

  -Possibly find computer Tech/Geek fellow/Pal.

  -Learn something new! (Not including the common sense).

  Explanation:
  -J' was too high as he tried to become the next Bill Gates and create a calculation method in which the processor completely laws of physics bi-passes.

  Topical issues:

  (1) I have little experience, I'm sure compared to most of the users on this forum; However, in the College computer Programmning.

  ---> Very adept in acquireing newly introduced information & request a great sense of understanding of puzzled, abstract and largely serious concepts. (It will be just a little easier than most to explain a simple fix).

  (2) I deleted all partitions, including the system files, System opperating, some methods of starting, all the drivers, and to add to the mess, the existing partitions are not yet check the size or formatting - I'm sure.

  ---> (Drive C is 400 GB;) Drive D is the main partition with only 20 GB)

  (3) any chance of installation/download are only feasible when my boyfriend does everything it does and 'fixed' the laptop.

  ---> Cell phone MAY start, can use internet and MAY be able to download 5 pictures before the system shuts down and the other requires a few hours to wipe the minimum amount of space on the hard disk before you reinstall Windows.

  (4) Windows 7 is the only OS (so far) that we are able to install; We have no other disks, but Windows 8.1, I think, was the original Opperating system and look forward to this return.

  (5) I don't know yet how I will receive notification here on these forums. I'm drunk at 05:59, so I'll find out tomorrow.

  ---> Assuming that I remember I wrote it.
  
  And I think that's all that I need a little help with if you want messages me or live chat to help solve this problem, I think that Skype is aloud; and in all the uncertainties, it is listed on my profile.

  Thank you, & your best.
  Caleb D. Parker
  @CiDiParks25

  CiDiParks25

  What will work restores your computer to its original factory state using HP recovery media.  It is a DVD and CD set that will erase the hard drive (removing all data, applications and settings, reinstall the original OS, drivers and utilities for HP. In some cases, you will be able to order a USB instead of discs.  You must order at HP; they cannot be downloaded.
  
  The link is on the software page and download drivers for your PC: http://support.hp.com/us-en/drivers/selfservice/HP-15-Notebook-PC-series/7137590/model/7484025

  Once there, scroll to the bottom of the page and you will see an entry for the command Recovery Media-CD/DVD/USB. Click on the symbol '+' to expand this entty and click on order to press for more details.
  
  Or, if you prefer, you can do the same by contacting HP Customer Service:
  
  If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
  
  If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
  
  Note that if HP no longer provides a recovery media for your model, a few other sites, you can check are: http://www.computersurgeons.com/ and http://www.restoredisks.com/
  
  Don't forget to read through the material in the linked thread before attempting the recovery: http://support.hp.com/us-en/document/c00707939
  
  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• Start black screen and beeps, HELP pls

  I have a HP Pavilion zv5410. When I turn it on it has a black screen and it beeps (1-2-2). I went on some sites about, but don't really understand what is happening.

  I put the new RAM in because that I was told by a techie, it was usually the RAM goes bad, but this did not help. I can't do anything with the BIOS because I can not even a screen to enter in info, even with an external monitor.

  I was told that I could get the data on my hard drive with a hard drive enclosure kit. I bought the kit box Rocketfish 2.5 inches, but it has a different connector (for individual pins where solid mieare 'PIN' this slide down into the connector of the laptop).

  Any ideas or suggestions. I'd appreciate any help.

  Thank you all,

  K

  It worked!  I feel so stupid for not trying to see if the plastic piece came out.  Thank you much for the help!

  Karen

• HP Pavillion DV6 - full reset and need help

  Hello, I need help with my HP Pavilion DV6 laptop. Recently, a virus was on the computer and I did the scan and difficulty. the computer was running a bit slow so I backed up the computer to my external hard drive. I tried to retrieve the disks of the computer but it kept failing. I did on the last attempt to put them on dvd, but when I reset my computer he remained in d; Recovery. I tried several things to get out of recovery. I tried recoveering for the final analysis known and save. I have tried the factory reset, and nothing has worked. I've done all the analysis possible on the computer. I had a disc of windows just to see if I could come back in windows and it loads fine, but now there is the problem. my computer is not the case, as it should be. My wifi is not available, and the implementation is somewhat different. Is there a way I can return my computer to facotry settings? My brother and dad have the same exact computer I do not know if you use it recovery disk would restore my computer to its original settings or not. Any advice or assistance would be greatly appreciated.

  Hello

  In this case, as long as the laptop belonging to your Dad or your brother is exactly the same (that is to say the exact same model No., hardware and version of Windows 7), then their recovery media will work on your laptop.

  Kind regards

  DP - K

• BlackBerry Smartphones really stuck and need help guys!

  OK so here is my problem, my sister gave me her blackberry 9900 like shes got the new iphone.

  So heres where my problems began.

  I put my sim card from his cell phone and lit,

  Then around the top came the blackberry id so I clicked on logout and he says that, as the SIM card changed id to do a wipe, so he says type blackberry words to wipe it is what I did.

  So after where it says "Please wait while your device is to be wiped" or some thing in the lines, he went to a white screen and did nothing like 5 minutes so I decided to take out the battery and put it back in to see if it works, I pressed the power button and the word BlackBerry with blackberry sign came and the loading bar white bit at the bottom and after the white line at the bottom of loading had finished he went to a white screen, once again, only this time with a percentage of thing, when it hit 100% he exploded and reloaded at the part where once again the word blackberry and sign is there and the white line at the bottom of loading and now it moves not in this page , Well it does exactly is after completing loading (white line goes all the way to the top) it goes to a black screen and then did the same thing again and again the word line and white blackberry in the background load, and then he goes out and does the same thing over and over again.

  So I read a few messages from people and reading plug in to pc and charge Blackberry desktop manager what I did and it recognizes the phone but on the up coming Desktop Manager "blackberry desktop software can communicate with the device", I clicked on update, then repair but nothing happens just goes back to not to communicate with the phone while the phone is the same * beep * thing blackberry Word with the sign beside him, loading bar at the bottom will fill then restarts and does the same thing over and over again!

  Please help guys!

  It's done I did it and it has automatically updated the phone and it works perfectly now, thanks

• Hey guys new here and need help guy how to turn on my CS2 after 30 days grace. It's an older version, I bought new off Ebay and I tried all online and phone nothing has worked and now it does not open?

  need help with an old version of CS and I tried to active several times in 30 days and it don't work and now it will not open now help please!

  CS2 (or earlier version) software activation server replacement

  NOTE that CS2 will not install on a Mac "modern."

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

  When you install the special version of the PPro2 on a Win7 or Win8 or Win10 computer, you may need to right click on the program icon and select compatibility Windows XP in the popup of option

• Making the ear of corn and need help with the ball.

  I do some corn on the COB for an illustration and I need help with the texture of the ball. I've been slowly making progress with gradient for kernels mesh, but I can't seem to recreate the look of the ball at all. I tried to recreate it in a rectangle by using the option in the menu object (1 row, 50 columns) gradient mesh and I'm trying with the fusion in object mode, but not lucky yet. Can someone help to put me on the right track to make the texture:

  

  

  

  I've been slowly making progress with gradient for kernels mesh, but I can't seem to recreate the look of the ball at all.

  Tank,

  You have published three images stylistically very different. The first is photographic and call probably (but not necessarily) for graduates of mesh. The other two are graphical treatments (and frankly, they're both rather flat; lack of depth).

  Illustration style extends the range of cartoonish in sketchy photo-realism and all the rest. The problem is you didn't show your own attempt so that anyone can have an idea of what you're trying to achieve the stylistic point of view.

  I just need to put in place so that the final step does not appear the whole box. The problem now is trying to make the style of the good brush to reproduce the effect...

  You seem to think you have to build a kind of linear construction and then find a way to reshape the shape of each part of the leaf. Yes, you pouvez approach it this way, but Illustrator users has often tend to be what aunt Molly would call "too clever by half."

  Not everything must be something semi intelligent auto or complex and tedious consruct involving brushes, envelopes, masks, etc, etc. Much can be accomplished by thinking that he just thanks to measure you draw directly economic paths and constructions, which take no more time (often less) and result in very tidy, simple files. Again, a lot depends on what you are trying to achieve the stylistic point of view. But here's an example that only took a few minutes to draw:

  

  

  

  

  

  If the above consists of:

  Three roads closed, 8 points each, with ordinary linear degrees

  Three mixtures of open path with three anchor points for each key path

  Six paths closed for shadows / highlights, with 19 points in total

  Mixtures being directly from the paths drawn comic forms, the spacing of the veins 'automatically' and intuitively follows the width from point of view of the worksheet.

  Rather than to build a boilerplate brush, colouring and the weight of each of the three main paths of the vein mixtures can be set individually at any time, simply directly by selecting the key path.

  JET

• trying to upgrade my version and need help badly

  Please need help bad, try to upgrade to a newer version

  Please describe the problem in more detail.