Dimension E310 blue screen

Similar Questions

• Windows 7 clean installation Blue Screen of Death (BSoD) on a loop of reboot

  Aloha everyone,
  I did an install customized windows 7 on a new Western Digital 1 TB sata hard drive, which has been formatted, partitioned, scandisk, and a ntfs c drive was created prior to installation.
  The installation ended safely.  I then install my screen reader, Window-Eyes, requiring a reboot.  After the reboot, I started to install critical updates to Windows.  On my fourth update and restarting, I got the blue screen of death, that of some people call a BSoD.  I rebooted and Windows itself restored to a previous state of good, of my just accept the default choice.  Then the rear computer works, but if I stop, restart I get the blue screen of death (BSod) is back, and the loop begins again, i.e. windows restores good condition that works well, until you stop, but on reboot - BSoD is BACK!
  I removed the automatic update option, I disabled ScanDisk, drivers updated, bluetooth devices, deactivated sideshow, etc., without any positive result.  I called Microsoft for assisstance and the technician acted like this isn't a known issue, but he assured me that he could solve the problem.  He took control of my computer remotely and do not tell me anything except that the computer would check and repair any problem on reboot, and if he did does not resolve the problem, I have to remember.  The computer has rebooted without the BSod, but I stopped to check if the loop went, and it is not!  To restart the BSOd was back.  It is to note that if I put the computer to sleep, I get a clean start, but stop, restart or hibernation, I get the blue screen of death (BSoD)!
  It is a Dell Dimension XPS 420 with a intel Q6600 processer, 3 GB of ddr2 memory, which came with OS Vista Home premium 32-bit.  The Vista system, the last time I got a BSoD has been for more than a year.

  After researching this problem on Google, it appears that there is a problem without a solution.
  I ran "which has crashed, you can get:
  http://www.resplendence.com/downloads

  The following accident report:
  Monday, December 21, 2009 23:23:44 your computer crashed
  This was probably caused by the following module:
  Wininit.exe
  Bug check code: 0xF4 (0x3, 0xFFFFFA800573B060, 0xFFFFFA800573B340, 0xFFFFF80002D91240)
  Error:
  CRITICAL_OBJECT_TERMINATION
  Empty the file: C:\Windows\Minidump\122109-16972-01.dmp
  file path: C:\Windows\system32\wininit.exe
  product:
  Microsoft® Windows® operating system
  company:
  Microsoft Corporation
  Description: Application to Windows startup
  The accident took place in a standard Microsoft module. Your system configuration can
  be incorrect, perhaps the culprit may be another driver on your system which cannot
  be identified at this time.
  Monday, December 21, 2009 20:22:10 crashed your computer
  This was probably caused by the following module:
  Ntoskrnl.exe
  Verification of error code: 0 x 50 (1, 0xFFFFF80002A9300C, 0xFFFFFFFFFFFFFFD0, 0 x 0 x 0)
  Error:
  PAGE_FAULT_IN_NONPAGED_AREA
  Empty the file: C:\Windows\Minidump\122109-33306-01.dmp
  file path: C:\Windows\system32\ntoskrnl.exe
  product:
  Microsoft® Windows® operating system
  company:
  Microsoft Corporation
  Description: NT Kernel System &
  The accident took place in a standard Microsoft module. Your system configuration can
  be incorrect, perhaps the culprit may be another driver on your system which cannot
  be identified at this time.
  Sunday, December 20, 2009 15:28:42 crashed your computer
  This was probably caused by the following module:
  Ntoskrnl.exe
  Verification of error code: 0 x 50 (1, 0xFFFFF80002ADC00C, 0xFFFFFFFFFFFFFFD0, 0 x 0 x 0)
  Error:
  PAGE_FAULT_IN_NONPAGED_AREA
  Empty the file: C:\Windows\Minidump\122009-17565-01.dmp
  file path: C:\Windows\system32\ntoskrnl.exe
  product:
  Microsoft® Windows® operating system
  company:
  Microsoft Corporation
  Description: NT Kernel System &
  The accident took place in a standard Microsoft module. Your system configuration can
  be incorrect, perhaps the culprit may be another driver on your system which cannot
  be identified at this time.
  Thursday, December 17, 2009 12:27:45 AM your computer crashed
  This was probably caused by the following module:
  Ntoskrnl.exe
  Verification of error code: 0 x 50 (1, 0xFFFFF80002A9300C, 0xFFFFFFFFFFFFFFD0, 0 x 0 x 0)
  Error:
  PAGE_FAULT_IN_NONPAGED_AREA
  Empty the file: C:\Windows\Minidump\121609-28111-01.dmp
  file path: C:\Windows\system32\ntoskrnl.exe
  product:
  Microsoft® Windows® operating system
  company:
  Microsoft Corporation
  Description: NT Kernel System &
  The accident took place in a standard Microsoft module. Your system configuration can
  be incorrect, perhaps the culprit may be another driver on your system which cannot
  be identified at this time.
  Monday, December 14, 2009 20:59:21 crashed your computer
  This was probably caused by the following module:
  Wininit.exe
  Bug check code: 0xF4 (0x3, 0xFFFFFA80059A3060, 0xFFFFFA80059A3340, 0xFFFFF80002DC4240)
  Error:
  CRITICAL_OBJECT_TERMINATION
  Empty the file: C:\Windows\Minidump\121409-25506-01.dmp
  file path: C:\Windows\system32\wininit.exe
  product:
  Microsoft® Windows® operating system
  company:
  Microsoft Corporation
  Description: Application to Windows startup
  The accident took place in a standard Microsoft module. Your system configuration can
  be incorrect, perhaps the culprit may be another driver on your system which cannot
  be identified at this time.
  Sunday, December 13, 2009 02:17:55 your computer crashed
  This was probably caused by the following module:
  Wininit.exe
  Bug check code: 0xF4 (0x3, 0xFFFFFA80058A4060, 0xFFFFFA80058A4340, 0xFFFFF80002D8A240)
  Error:
  CRITICAL_OBJECT_TERMINATION
  Empty the file: C:\Windows\Minidump\121209-24648-01.dmp
  file path: C:\Windows\system32\wininit.exe
  product:
  Microsoft® Windows® operating system
  company:
  Microsoft Corporation
  Description: Application to Windows startup
  The accident took place in a standard Microsoft module. Your system configuration can
  be incorrect, perhaps the culprit may be another driver on your system which cannot
  be identified at this time.
  Conclusion
  6 dumps were found and analysed. Note that it is not always possible to
  assert with certainty whether a reported driver is really responsible for crashing
  your system or that the cause is in another module. However, it is suggested
  looking for updates for the products that these drivers belong to and regularly
  Visit the Windows Update or activate the automatic updates for Windows. In the case of a piece of
  defective material is in trouble, a Google search on the bug control
  Errors, as well as the name of the model and brand of your computer can help you investigate
  This further.
  end of the crash report.
  A side comment:
  Them are 56 reported problems, and none of them have solutions. If I go through each problem report and check for solutions, about 80% of the times I ask myself to send to Microsoft for more information about the problem and I click on send, but I always get the following:
  [Window title]
  Incident reports

  [Main instruction]
  Problem connecting to the Windows error reporting service

  [Content]
  Some of the reports can not be uploaded to the Windows error reporting service. Please try again later.

  [Close] »
  I tried several times with the same result, that is, the details of the problem which has need of Microsoft is not be received.  To this end, the problem will not be found.
  Thanks much for any help.
  Manny
  P.S. I'll never upgrade a Windows operating system.  My recommendation for anyone who is planning to upgrade to Windows 7 is to try first on a dual boot using the free download.  If it works for you, consider yourself lucky and buy the upgrade.  If it does not, then remove Windows 7 and stay with your old system.

  Please check your RAM for errors (use memtest86 + to test). "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Blue screen of death (stop 0x0000007B) after April Windows Update on XP Home.

  My machine (Dell Dimension 3100 with XP Home) home is set for automatic recovery of Windows updates. I reload often, but when I was forced to start again last week, I got the blue screen of death. Apart from the general BSOD error message, I got the stop code:

  STOP 0x0000007B...

  I forgot the subsequent stop codes, but search recall I was doing on them indicated drivers disk or storage-related problem.

  I ran all sorts of Dell diagnostics on my hardware, get absolutely no problem. Scan of a viral infection was also negative. A colleague help out me suggested removing the updates of Windows of April, he did help and usefulness of the ERD. XP loaded and started after that, if I had to go through a process of slooow restart for most updates. My office also now charge many times slower - I suspect drivers and services can't find what they expect to find and take considerable time to make mistakes.

  My Dell has a range of Intel (RAID-1) matrix installed. I strongly suspect that this pilot was in trouble after the April update Windows Update.

  So, what should I do to prevent this from happening again? I don't know the specific fix involved. I have disabled the automatic updates for now.

  TIA

  Rick

  Complete sweep of Kaspersky AV, booted from the CD, turned up negative, so I doubt that it is an infection.

  I'm sorry, but this does not exclude the possibility of infection. See step # 3 in my previous response, or contact Ms. PCSafety for assistance.

  Or see http://msdn.microsoft.com/en-us/library/ff559218 (VS.85) .aspx and/or http://aumha.org/a/stop.php#0x7b for more troubleshooting ideas.

  Or if you let Windows Update to install an update for the driver (never a good idea), try a roll-back of pilot.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Blue screen... STOP: 0x0000008E (0xC0000005, 0xBF8B6C11, 0xA9538368, 0x00000000) win32k.sys - address BF8B6C11 base address BF800000 DateStamp 4C7d06ce

  I have a Dimension 3000 bought in 2005, upgraded to 2 GB of RAM.

  I recently implemented almost from scratch, because Opera program and profile would be repeatedly corrupted, making me lose the email. (This reappeared even after reinstall opera clean, do not use old messages or other profile files). Therefore, I restored a backup of the C: partition Ghost (there are others for my data and downloads) I did shortly after the purchase, after which I had installed only Ghost and two games (I uninstalled the games). I installed SP3 and ran Microsoft Update. I was trying to reinstall other programs that I use now. It's Rhapsody; one of my kids 'synchronize' a player MP3 Sansa Fuze with Rhapsody.

  A few days ago when closing Internet Explorer, I got a message that should be closed and I could send a report to Microsoft. It is also used to happen before, from time to time.

  Then, more recently, when I closed Rhapsody, I got a blue screen with a message that there was a problem. He said I could try to change some settings in the BIOS. I remember what happens before I restored the ghost of 2005 BU. I looked in the BIOS and not able to find the parameters referred to in (something like memory cache). I wish it were possible to print these messages on a blue screen. I didn't copy the entire message, but I write these references:

  STOP: 0X0000008E (0XC0000005, 0XBF8B6C11, 0XA9538368, 0X00000000)

  Win32k.sys - address BF8B6C11 base address BF800000 DateStamp 4C7d06ce

  This means almost nothing to me. I hope that someone on the forum knows what this means and can suggest what could be the problem.

  So far, I have not had more wrong with Opera, so there may be two distinct problems. OTOH, I reinstalled only Opera on 10/12/10; I can still have problems with it.
  

  Hello

  Here is more information on the bug 0x8E control: http://support.microsoft.com/kb/945658/

  The 0x8E KERNEL_MODE_EXCEPTION_NOT_HANDLED can be caused by a faulty service/driver, damaged hard drive or defective display card not enough space, or memory, Hardware/software incompatibility and third-party remote control software. So to get started:

  1. test your memory. Run Memtest you can download from http://www.memtest.org/#downiso. Download the ZIP file, extract the ISO and write on CD. Once written to CD, boot your PC with the CD and run Memtest. Allow the test to run by at least 3 passes or until it gives errors. If you have more than 1 memory module, run the test on each module separately. Try running Memtest from a cold - start unplug your PC for an hour to cool down, then immediately run memtest again when you next turn on the. This way memtest will run when the memory is cool and after the 3rd pass when the memory is hottest.

  2. update your display driver. Reference Dell seems to have highlighted 3 different models of Dimension 3000 and so there is 3 different Intel display drivers. See if you can find an updated driver on the Intel Web site. If you use a graphics add-on card try to find an updated driver from the manufacturer's website. If you have any trouble finding a driver let us know what brand and model of graphics card you have.

  3. update the Rhapsody software. (I think it's the software you using http://www.rhapsody.com/-software ?). If it's Rhapsody software I think it seems to integrate into your Web browser and it's perhaps why Opera and now IE are mistakes? You can uninstall Rhapsody for a while just to see if it is the reason for your BSOD.

  4. when the 0x8E BSOD is caused by win32k.sys, yours, is it then possible, it is caused by control software remote third. It can include programs such as VNC, PCAnywhere, etc. of Teamviewer, RAdmin.  If you use one of these programs, uninstall it and see if the PC stops mistakes.

  5 run a scan on your hard drive. You can check your hard disk for errors by going toStart ->Run -> type chkdsk c: /r -> clickOk . When asked if you want to force a sayNodisassembly. When asked to plan the audit at the next startup, Yes. Reboot your PC to allow running chkdsk.

  Alternatively, you can run a diagnostic on your hard drive. This by downloading the diagnostic program from your hard disk manufacturer. A list of manufacturers and their diagnostic tools can be found here: http://www.tacktech.com/display.cfm?ttid=287. Once more, download the ZIP file, extract the ISO and write to CD. A time written on CD, boot your PC with the CD and run the test Advanced/extended.

  Also make sure you have enough hard disk space. It is always recommended, if possible, to have at least 15% of your free hard disk capacity.

  6. Finally, take a look in your event viewer when the BSOD for possible errors. You want to look especially in the system and Application logs (and maybe Internet Explorer connects). You can run Event Viewer by going toStart ->Run -> type eventvwr.msc -> pressOk -> event viewer screen opens. If there are errors listed in one of the newspapers type them in your next post if you are not right.

  Reading your post I see 3 specific issues, that you might want to focus:

  -The memory you added (run Memtest) and hard drive (run Chkdsk)

  -The Rhapsody program - try to update or uninstall.

  -The software was initially corrupted until you make the first image after the purchase. So you just ghost the problem on.

  I hope this helps. Good luck.

• System Restore will set a BAD_POOL_CALLER blue screen?

  If I do a "System Restore" to start the system and pressing Ctrl F11 to try to avoid a constant blue screen BAD_POOL_CALLER... what will solve the problem? The "System Restore" will erase all my files? I have a Dell Dimension E520 running Windows XP Media Edition

  If you use Ctrl F11, which calls for the restore by Symantec PC Dell and who could restore your system to the as shipped on the status of the plant and you would lose all your personal files:

  NOTICE: Using Dell PC Restore permanently deletes all data on the hard drive and removes applications or drivers installed after you received your computer. If possible, back up the data before using PC Restore. Use PC Restore only if system restore did resolve your operating system problem.

  A Windows XP System Restore does not know or care about your personal files and allegedly, leave them intact.

  You can read about the various dining options in the Dell E520 (page 53) user manual here:

  http://support.Dell.com/support/eDOCS/systems/dime520/en/OM_en/NH730A01.PDF

• Blue screen error STOP: 0x0000007E (0xC0000005, 0x8Ac18874, 0xF792A468, 0xF792A164)

  Original title: blue, impossible to restart screen

  System: Dell Dimension 3000, Windows XP Home - SP3.

  Problem: I recently installed the new memory (now has 2G), check that the memory has been recognized and work.  Computer worked fine for several hours, with a noticiable improvement.  Then received warning from McAfee "A Trojan had been identified" and the computer had to be stopped to fix.  Not sure if this was related to the new memory, but the moment was just a few hours apart.  When I tried to restart the computer - I got a blue screen of death with the following technical information: * STOP: 0x0000007E (0xC0000005, 0x8Ac18874, 0xF792A468, 0xF792A164).  I can't start the computer in safe, except the Mode modes safe mode with command prompt and to my level of skills making me much good.  Please notify.  Thank you.

  Hi mysticskier,.

  Follow these methods.

  Method 1: Disconnect all external devices such as printer, scanner, etc.

  Method 2: Follow the steps in the article.

  You may receive a Stop error on a blue screen when you start a Microsoft Windows Server 2003-based computer or a Microsoft Windows XP-based computer

  http://support.Microsoft.com/kb/893239

  You receive a random "0x0000008E" error message on a blue screen in Windows XP

  http://support.Microsoft.com/kb/827663

• Blue Screen of Death Dell PC error Code 650F137B

  Hello

  Recently I was make a noise from my PC to start up, and then all of a sudden now I have a blue screen with the error code 650F137B that the same thing happens

  When I try to start in safe mode, fortunately I backed up my data before that happens, it's a Dell Dimension 5150. I would appreciate some help with this please

  Gerry

  You are welcome.

• Blue screen error message

  I don't know if my question got by, so I'll post again in case it didn't. I have a Dell Dimension 2400. I have a blue screen the stop code of ox0000007e (oxc000000, oxf844209, oxf899fbbc, oxf899f8b8.) I need to know how to fix it. I'd appreciate any help to get my computer upward and traffic rights. I can't get into safe mode, but I don't know where to go to from there.

  Hi Debra King,

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?
  3. When exactly do you get the blue screen of death on the computer?
  4. You have security software installed on the computer?

  As the computer can start in safe mode, there is a possibility that some third-party programs installed on the computer is the origin of the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• Registry problems cause hard disk by clicking on, then blue screen

  Dell support said the clicking hard drive and next blue screen is caused by a registry error. In order to solve a problem of major virus and start over, I have completely reformatted the hard drive and installed the operating system and other programs, so I can't understand why I always have a registry problem.  Although I can not specify the exact moment, it seems to happen after an update of Windows, but also occurs at random.  It would also be the installation of MS Office 2010, because I do not remember what happens before the 2010 Windows Installer.  I read that registry cleaners do not work, so I am at a loss for what to do. What I don't understand is how the registry is damaged when all that I've done is install everything from scratch.  I have a Dell Dimension 5100 running Windows XP Home Edition w/SP3.

  Hi LiveToFish,

  1. What is the problem on the computer after reinstalling Windows?

  2. don't you still get the errors blue screen on the computer? If so, then what is the message on the blue screen?

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  If the previous step fails, then check the event viewer to determine the cause of the blue screen on the computer and post back with the details.

  Procedure to view and manage event logs in Event Viewer in Windows XP

  http://support.Microsoft.com/kb/308427

• Find out how to type a letter for printing on my Dell Dimension E310 using Windows XP Home Edition

  Hi, I want to know how to start from home screen to type a letter for printing on my Dell Dimension E310 using Windows XP Home Edition... Thank you

  On Saturday, February 5, 2011 14:25:06 + 0000, Clinton Jones 1 wrote:

  Hi, I want to know how to start from home screen to type a letter for printing on my Dell Dimension E310 using Windows XP Home Edition... Thank you

  You type a letter in a word processing program (Microsoft Word, Corel
  WordPerfect, OpenOffice, etc.). Do you have a word processing program
  installed?

  If you have not installed Word processing program, you can use
  WordPad, which ships with Windows. But note that WordPad is a very
  primitive processing program (really more a glorified text)
  Editor in Chief) and gives you much less control over the formatting to a real
  processing.

  Ken Blake (MS-MVP)

• Constant blue screen with different messages (0 x 24 & 0x7B). Everything OK, but nothing works.

  System Setup: Dell Dimension E520
  250 GB, 2 GB of RAM, Core2Duo, WinXP Media Center diskette, DVD, DVD - RW (2 Bay), PCI graphics card, SATA opeartion = ON RAID in Bios (a single drive - Western Digital WDC WD2500JS).

  One night (three weeks ago, beginning of December), the computer froze.  I made a stop hard and rebooted.  Since then, he has been constantly showing the blue screen.  I get the blue screen different to different modes.  Here are some cases.

  1. If I do a Safe Boot (with command prompt) it stops on MUP.sys and then turn off for a second and then shows blue screen.
     This shows blue screen STOP: 0 x 00000024 (0 x 00190203, 0x89B8B8B0 , 0xC0000102, 0x00000000)
  2. If I do a Safe Boot (with networking) it makes a break on MUP.sys and then turn off for a second and then shows blue screen.
     This shows blue screen STOP: 0 x 00000024 (0 x 00190203, 0x892629F8 , 0xC0000102, 0x00000000)
  3. If I do a Safe Boot it stops on MUP.sys and then turn off for a second and then shows blue screen.
     This shows blue screen STOP: 0 x 00000024 (0 x 00190203, 0x89B8C8B0 , 0xC0000102, 0x00000000)
  4. To last good known cofiguration (shortly shows black screen Windows XP for the loading of components and then shows blue screen.
     This shows blue screen STOP: 0 x 00000024 (0 x 00190203, 0X894A28B0 , 0xC0000102, 0x00000000)
  5. If I Regularly Windows XP it stops after a black screen with the logo of Windows XP and then shows then the blue screen.
     This shows blue screen STOP: 0 x 00000024 (0 x 00190203, 0x89DEC9F8 / 0x89DEB9F8 / 0x89DD99F8 , 0xC0000102, 0x00000000) continues to change the middle number.

  I tried to boot from LiveLinux (OpenSuse) and it seems to work perfectly.  I am able to access all files and able to run memory tests.  Memtest passes all iterations of several that I did.  Furthermore, I used (provided with this high-end system) system diagnostic tools, and passes all the tests of memory, hard disk of the Office.  I did as well detailed tests.  Everything seems to work with Linux, and also for diagnostic tests, so I'm lead to believe that the material works very well.

  Then I tried to re - install the XP.  When I insert the XP Setup disk, it starts to load files and then displays the message 'Setup starts windows' for a few seconds, and until it reaches to show me any system selection prompt goes blue screen.
  This shows blue screen STOP: 0x0000007B (0xF78DA63C, 0xC0000034 , 0x00000000, 0x00000000)

  Because I can't get into any time except Linux, I'm really lost here.  I want to be able to start the windows mode that's before the crash, and now I'm lost.  Help, please.

  HI -.
  I was able to identify and solve the problem by fixing the MBR.  Since Linux working and Windows are not even in the installation program, it lead me to a clue.  I also enjoyed that it was a DELL machine.  So I basically ran a utility which sets the master boot record (MBR) and the partition information.  This allowed me to access the Dell restore partition.
  I could have checked once I fixed the MBR and tried to see if the problem is solved, but I missed it and simply returned in orginal factory State, once I was able to get the image-Ghost in the recovery partition.
  Thanks to Dan for the detailed documentation and the tool here:

  http://www.goodells.NET/dellrestore/fixes.htm

  I write this so that if anyone else runs into this can solve the problems.
  See you soon

• What can I do to fix this? BLUE SCREEN! : O

  There is not long I started getting blue screens... and when I turn on my computer, if it beeps it turns on but the screen will not. If this is not the case, a sound signal is heard normal for about 30 minutes, the computer lights up and then I get a blue screen again. Someone help please!

  That's the summary problem after.
  I am running a Windows vista ultimate and I have service pack installed two.
  Computer is DELL Dimension 9150
  Signature of the problem

  Problem event name: BlueScreen

  OS version: 6.0.6002.2.2.0.256.1

  Locale ID: 1033

  Files helping to describe the problem

  Mini102805 - 07.dmp

  SysData. XML

  Version.txt

  See a temporary copy of these files

  WARNING: If a virus or other security threat caused the problem, open a copy of file can harm your computer.

  Additional information about the problem

  BCCode: d1

  BCP1: E84589E4

  BCP2: 00000002

  BCP3: 00000000

  BCP4: E84589E4

  OS version: 6_0_6002

  Service Pack: 2_0

  Product: 256_1

  Try to run BlueScreenView
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreenView scans all your minidump files created during 'blue screen of death' crashes and displays information about all accidents of a table.

  You can run it from the zip, no need to install.  Double clilck on the dump file that corresponds to the time of the Crash of the blue screen.

  The numbers in the dump files correspond to the date MonthDayYear, but the filename of the image under "Files helping to describe the problem" is Mini102805 - 07.dmp, which means October 28, 2005 and-07 means that it is the seventh day dump file. It looks like that your clock is not running.

  Double-click the dump file to see its properties, the properties box, take note of the file next to the heading "caused by the driver:" do a search on google for the file to see what program it belongs to. You can then uninstall, update or reinstall the program.

• Unable to start - blue screen after Windows update

  original title; on dell dimension C521... blue screen after Windows update last night 3/9...3:00am...running Vista

  Can not even go in safe mode

  Hello

  try to do a startup repair or a system restore before the update using the Startup Repair disk if you don't have a vista dvd microsoft

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  If you can make the above change how you receive updates to find the update problem

  When right-clicking on it UAC prompt you hide it

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Choose one of these settings:

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

• Blue screen, lines on the screen on the start screen

  During the game Fallout New Vegas, the computer froze. I was forced to turn off the power switch. When I rebooted it was blue in dotted lines that go up and down the screen vertically then it bluescreened. The blue screen says that 'nvlddkm.sys' was responsible for which is something to do with my graphics card driver.

  I tried to boot into safe mode and uninstall the drivers and the device manager card and reinstalled everything but it kept happening.

  System information:
  Dell Dimension 9200,
  Vista 32-bit,
  NVIDIA 7900gs,
  Intel Core 2 CPU 2.13 GHz 2.13 GHz,
  2 GB of Ram

  Hello

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ===========================================================

  Check out these utilities to see if information may be collected:

  It is an excellent tool for displaying the blue screen error information

  -Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  and displays information about all accidents of a table.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  -------------

  MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
  time of the BSOD to provide more information about the possible cause - see TIP.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------

  AppCrashView - free - a small utility for Windows Vista and Windows 7 that displays the details of all the
  application goes down has occurred in your system. The information breaks down is extracted from the .wer
  the files created by the Windows Error Reporting (WER) of the operating system component of each
  time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
  text/html/csv/xml file.
  http://www.NirSoft.NET/utils/app_crash_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP - Windows Expert - consumer: bike - Mark Twain said it right.

• (Redirected) Blue screen every time that I boot

  Whenever I start the dimension 3000 after approx.5 in 10 minutes, I get a blue screen showing options memory BIOS disable such as caching or shadowing. I also have a code.with to stop a series of zeroes and f I've not been able to get anywhere with this desktop computer. Sometimes I can get into safe mode, but it crashes as well.

  I appreciate your help!

  Hi tech1126,

  Please repost this in the forum Office help.

  http://en.community.Dell.com/support-forums/desktop/f/3514