Disable the language on the logon screen

Similar Questions

• Disable the logon screen after being inactive.

  Original title: connect

  When I leave my computer for a few minutes, I have to log on to windows. Why is this happening?

  Hi Darlene,

  This problem can occur if the screen saver settings are set to display the logon screen when the computer is locked or is inactive.

  I would suggest trying the following steps and check if it helps.

  a. right-click anywhere on your Windows 7 Desktop and select Customizefrom the context menu.

  b. in the customizationwindow that opens, click on the screensavericon in the lower right corner.

  c. in the screen saver settings, uncheck the box marked on the CV, the logon screen.

  d. click apply and then click Ok.

  Check out the link for more information.

  Use your Windows password for your screen saver password
  http://Windows.Microsoft.com/en-in/Windows7/use-your-Windows-password-for-your-screen-saver-password

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• screen saver on the logon screen

  Hi all

  in the settings I disabled completely safe screen. But now I've started my mac, waited half an hour and then tried to open a session. And... guess it... the logon screen showed a screen saver.

  So two questions:

  -where can I turn on / turn off screen saver for the logon screen?

  -where can I set up the screen saver for the logon screen?

  Greetings from the Germany

  Chris

  OK, a third party, but please Don t laugh:

  s ' is he or safer screen saver?

  In English, it means "Screen Saver".

  To set the screensaver used at the login screen, you can use the following command, which in this example is the name of the computer aka things. 'Message' screen saver.

  / usr/bin/defaults write /Library/Preferences/com.apple.screensaver loginWindowModulePath '/System/Library/Frameworks/ScreenSaver.framework/Resources/Computer Name.saver '.

  For more details, see these two items Apple.

  Managed client: how to customize the message of saving screen the computer name for the login window - Apple Support

  OS x: setting up a screen saver to display the login window - Apple support

• Re: How to reset the password on the logon screen - Satellite A300?

  How to reset the password on the logon screen?

  I can not access the installation of the establishment or BIOS because I can't pass this screen. Enter something wrong 3 times turns off the computer. I do not have the current password and I don't know what kind of password is and why it s asking one as soon as I turn it on.

  How can I solve this problem?

  You can not fix it. You can only disable it, but to do this, correct password must be known to you.
  As many times before in this forum we have already discussed on this topic.

  Password is very important security feature and we cannot advise how to bypass or remove passwords on the public forum. In other words, each stolen notebook protected by password will be easy to start and access to the recorded data will be easy.

  What is your laptop? You may have purchased this used an and now it is blocked by password?

• Computer hp laptop 15 will not pass the logon screen

  I go from 8.1 to 10. Had problems with USB and asked the Microsoft Chat Help. They fixed but my keyboard and wifi would not work. They tried again and after that they have restarted the computer remotely it will not pass the logon screen (time/date). The screen and the keyboard manual do not work. I have a hp laptop 15. They want to take their store service 02:30 minutes away. Any help?

  Hi @samlobos,

  Thank you for joining the HP Forums!

  I read your post that your 15 HP laptop is not going to pass the opening screen. I'm happy to help you!

  Please, try the steps in this guide, the computer does not (Windows 10). If this does not resolve the problem, contact HP telephone support for further assistance for the maintenance options. (After you fill out the information, you will receive a phone number.) If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

  I hope that this post helps!

• Administrator account appear in the logon screen when the computer starts in normal mode, and there is also another account on the computer.

  I use Windows XP. I start my computer and I see an administrator account on the logon screen. I wonder why this account appears. I checked in the Help Center and he said that this account do not appear when I start Windows Mode without failure or when no other account does seem to accept the guest account. But after all, I never start Windows Mode safe and I also have another account on this computer. So why do this administrator account appear and how to hide? I thank.

  Hello

  ·         You are the administrator of the computer?

  You can read the following article to disable the administrator account. You must be logged in an admin account to do this.

  How to disable the Local Administrator account in Windows

• In XP, cannot change the way users log on and outside, getting the error "a recently installed program has disabled the Welcome screen and the user fast switching.

  The switch on my fast computer of user function has been disabled on my computer. When I try to use this function. I get the following message.

  A recently installed program has disabled the Welcome screen and the fast user switching. To restore these features, you must uninstall the program

  . The following file can help you identify the program that made the change. GT Gina.dll

  * original title - I have a windows xp. Under user accounts, choose a task. Under change the way users log on and outside.  I get a message that the function of the Welcome screen has been blocked *.

  Hello

  You can try the steps outlined in the article below and check out them.

  The logon screen "Welcome to Windows" does not appear when you start the computer
  http://support.Microsoft.com/kb/817142

• Reference Dell pc with xp family. Restart to the logon screen

  Reference Dell pc with xp family. Restart to the logon screen. starts ok in safe mode. run msconfig and do that no change then do restart ok everything ok until the cold start, then hand it to restart?

  Peek into the registry to find clues.

  Disable the automatic restart in case of system error and see if you can capture a message of error checking bug (BSOD) with useful information.  Automatic restart in the event of system failure can be disabled in the F8 advanced boot menu, or you can turn it off in system properties.

  1. right click on my computer and select Properties.
  2 - Click on the Advanced tab, and then click on the Start button and recovery settings.
  3 clear the automatically restart box and OK your way out system properties.

  Start the computer in a Clean Boot State, if the computer starts successfully in a clean boot state, then one of your user programs most likely problems, look in the case of journal of indexes.

  How to configure Windows XP to start in a "clean boot" State
  John

• Microsoft Windows Vista Home Permium freezes to the logon screen or gets stuck

  Microsoft Windows Vista Home Permium freezes to the logon screen or crashes on the black screen with Copyright Microsoft Corporation with the load with six green bars moving through bar. It will start in safe mode. I ran the auto repair (recommended) when starting after being forced to stop. After it says its full it restarts and remains stuck on the black screen with Copyright Microsoft Corporation with the load bar with six green bars that cross so I force disable it again.

  I had no problem with this computer, he got in last seven. It was working fine yesterday and then the without wire came out, so I restarted the computer to find the connection again as I had done several times before. That's when it froze on the opening of session and password screen. Who started this cycle of freezing or stuck on the black screen with the loading bar permanently running.

  UPDATE:
  Start safe mode then made the instructions on the clean boot. Not checked, all iteams he says and rebooted and it worked. So I went to the next step to select only half to refine the list. Restarted and when at the loading screen for a little over 30 sec - 1 min (which is more short than the time it took to work initially after the first stage of the boot with all unchecked), but it goes to a completely black screen that has not happened before. So now, a little lost, or do I have to keep trying to refine?

  Hi Greg,.

  It will not harm the computer to run it in a boot environment.  Some programs do not work properly because they were probably responsible for their own services and rely on them to work.  You have disabled all non-Microsoft services, and things like printers and software can be difficult.

  Click Start, then options type power and press ENTER.  Let us make sure that the system is not configured to sleep.  Go ahead and put the power plan to High Performance, then click on change Plan settings below.  There will be a framework for "put the computer to sleep".  The value than ever.

  If it continues to turn black in clean boot mode, you may have a hardware problem.  One thing you could do if it's a desktop system and really need to use it now, it is the lid of the machine and aim a fan in the box.  This will help if it is overheating.

  Please complete the steps to diagnose the problem with the boot when you have the chance.
  Brent
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to disable the Welcome screen in windows 7 Home premium

  original title: disabling the welcome in Windows7 home premium screen.

  How to disable the Welcome screen in windows 7 Home premium. Therefore, type the user name and password when connecting

  Hello

  1. If you have Windows 7 Professional or ultimate edition, open the Group Policy Editor and navigate to the following policy.

  Computer Configuration / Windows Settings / Security Settings / Local political / Security Options.

  In the right pane, double-click the policy:

  Interactive logon: do not display last user name - change to "Enabled".

  2. If you have the Home Premium version, you can set this policy using the registry.

  * Make sure that you back up the key before making changes

  Open Regedit and navigate to the following location.

  HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionPoliciesSystem\\\

  In the right pane, locate the dontdisplaylastusername value. Double-click this value and change the value to 1 data. Click OK.

  If this value is not present, right-click and select new/DWORD (32-bit) Value.

  Name the dontdisplaylastusername (respect for case-sensitive) value, and then make the above change.

  Here is a screenshot of the login window.

  http://i196.Photobucket.com/albums/aa86/rvmv/ManualLogOn.jpg

  Let us know the results.

  Concerning

• iOS 10 disable the lock screen camera

  Is it possible to disable the lock screen camera? the people cannot take hundreds of pictures without you knowing? I know that you can disable the camera completely in the restrictions under settings, but surely there is an option to turn off?

  Come on apple. the phone the most expensive on the market should see some support and quality service...

• How to temporarily disable the touch screen in Windows 8? TouchSmart 320-1122la

  TouchSmart 320-1122la

  64 bit of Windows 8

  This solution does not work for me because I don't have the option "Use your finger as input device."

  Go to the sounds and then hardware and Control Panel.

  Select the Pen and Touch and go to the contact tab.

  At the top is "Use your finger as input device."  Uncheck the box.

  Click apply and then click OK.

  Is there another solution?

  Thanks in advance.

  Hi, I have a HP TouchSmart 320-1030, so it can work on your TouchSmart:

  1. Press Windows + X logo.
  2. Select Device Manager from the list.
  3. Click on the small arrow next to Interface devices to expand the list.
  4. Click the touchscreen driver (in my case, Voltron NextWindow touch screen).
  5. Right click and select disable from the list.
  6. Click Yes in the dialog box that asks you if you are sure you want to disable the touch screen driver.

  When you want your touchscreen to work again, follow the above procedure, EXCEPT when right-clicking on the touch screen driver, select enable.

  ~ Lil Liebe

  I'm not an employee of HP; I just want to help.

  Click the White Star of Kudos to say thank you *.

  By clicking 'Accept as Solution' on an answer that solves your problem makes it easier for others to find solutions.

• How to disable the touch screen on the Qosmio DX730?

  I want to use the calibrators of color such as colourmunki for my graphic work. These must place me something on the screen.

  How can I temporarily disable the touch screen while I do this?

  I tried Control Panel and manual with no luck.
  Thanks for any help

  Hello

  Have you found a way to do it?
  I think that it of not possible to disable the touch screen.
  Found no information in the user manual. Maybe you can check the BIOS settings available. Switch on and press F2 to enter the BIOS.
  But to be honest, I doubt that a power option would be available there.

• How to disable the touch screen of the Toshiba LX830 - 11 d

  Hello

  I managed to break the touch screen on a Toshiba LX830 - 11 d.

  The machine runs Win8 and always works with a USB keyboard and a mouse, although he thinks there are plenty of touch of the finger around the damaged area.

  Is it possible to disable the touch screen feature so that I can use it as a 'normal' PC or remove the screen touch himself leaving a simple LCD screen?

  Thanks for any advice.
  Dennis

  You see the touch screen in Device Manager? Maybe you can turn it off in there.

• HP Envy disable the touch screen

  I need help, disabling the touch screen on my HP Envy. I tried to get him here, but I found nothing. I'm not really sure how much more explicit I can get about what type it is. If you have any advice on how to understand this, that might be useful. Thank you.

  For Windows 8 and 8.1 with a newer laptop, open Device Manager. The same procedure is likely to be quite similar for Windows 7.

  

  Right click on the tactile HID-Compliant device and select properties to call the Properties window.

  

• How to remove a user name from the logon screen?

  Hi all

  I have an annoying problem and do not know how to solve.

  What happened is that used to use my laptop for the log-in het Skype account my ex-girlfriend. But in the login screen continues to display his name as mine always does.

  I used different registry cleaners and uninstalled and reinstalled Skype and had no results.

  How can I remove users on the logon screen?

  Thanks for all the help.

  Basically, you need to remove the folder of the account. I think the second part of this FAQ Help: https://support.skype.com/en-gb/faq/FA142/How-do-I-delete-my-profile-or-Skype-Name
  
  André

  If the answer was helpful, please mark with congratulations , and if the problem is resolved you can mark it with solution. This will help other users found this answer more easily. Thanks in advance!