Disable USB mass storage, but activate usb internet dongle

Similar Questions

• How to use Group Policy to disable USB Internet dongles

  Dear MS,

  This is to request a solution about the use of group policy to disable USB Internet dongles and allow other USB devices like mice and keyboards in server 2008 R2. I tried several options but still, I'm having the problem. Kindly give me a solution as soon as possible.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• USB recognsied but mass storage devices won't allow drivers to be loaded "access denied."

  installing the drivers for them, but when I plug them in I get the message 'new hardware found, windows found driver software for your device but encountered an error while trying to install' access denied.

  I have renamed and deleted the infcache.1 but it does not work

  Hello

  Check here first:

  Control controllers Control Panel - Device Manager - USB Serial - USB mass storage devices (you can have
  more than one - If Yes check all) - double click on the driver tab - click Driver Details - the default is
  C:\Windows\System32\drivers\USBSTOR. SYS (the C:\Windows is where you installed windows
  If not C:\Windows\) you can't have one for your car if it not recognized - when it is recognized
  and if doesn't work does not correctly return to this step.

  Check again once you advance through them.

  2nd check these:

  Operating instructions: find 'lost' Windows Vista drivers when you add a new device
  http://www.texxors.com/content/how-find-lost-Windows-Vista-drivers-when-adding-new-device

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  -------------------------------------------------------------

  If no joy:

  Make a Restore Point

  Control Panel - Device Manager - click in the empty area - VIEW - show hidden devices

  Now look everywhere EXCEPT the USB controllers for your device (cannot be found) and if you find
  It RIGHT CLICK and UNINSTALL all. The device is your (s) or similar.

  now go to the USB and UNINSTALL ALL controllers in the category, but the category itself.

  APPLY/OK

  RESET

  This refresh battery USB and hopefully it will allow the unit to install. (You may need a powered hub)

  Here is the similar procedure under XP, Vista is the same, except that we need to clear the specific device if present.
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer, as well as all
  USB devices that you previously used. Run Options and check the 1st three choices to see if one is there.
  Try to remove all instances and restart then plug the drive.
  http://www.NirSoft.NET/utils/usb_devices_view.html

  --------------------------------------------------------------------
  Check this box:

  Start - type in the search box - Windows Disk - find Windows Disk Management on the list above.
  Click - look RUN AS ADMIN to see if there is a letter assigned or a conflict of law or the
  drive letter assigned is not the one you used to see. This may show of course not the
  Road at all, it's just a check.

  -------------------------------------------------------------------
  http://www.Uwe-Sieber.de/usbdlm_e.html
  Its complex however, the site has a lot of help.

  And all this?

  See also this thread and those it refers too.
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/ff81438c-EAC5-4b38-8b89-d1a1dbe837f3

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• How do you get a usb mass storage on your computer

  I think that someone downloaded a usb mass storage to support all my usb ports remotely.  But when the appliance has finished downloading it tells me that my device was ready to use. Instead of using the device, I went to my manager and uninstalled device, but whenever I turn my computer off it back upward.   I've now disabled, I would like to know how to get rid once and for all.

  Hello

  -What is the operating system installed on your computer?
  -What do you mean by "someone downloaded remotely a usb mass storage?
  -What exactly is the problem you're having with your computer?
   
  Method 1: I suggest you run the Microsft FIXIT from the link and if this resolves the issue.
  Diagnose and automatically fix the Windows USB problems
  http://support.Microsoft.com/mats/Windows_USB_diagnostics
   
  Method 2: Uninstall and reinstall the USB controllers
  (a) open Device Manager.
  (b) expand the Controllers of Bus USB section by clicking on the '+' sign.
  (c) Uninstall each of the devices under the USB Controller section by right click on each one and then click Uninstall.
  (d) close the Device Manager and restart the computer.
  Windows RE-automatically install the USB controllers in your computer, without you having to do anything further. Your computer is now running properly USB devices.

  Hope this information helps.

• What resources the mass storage device USB use?

  This device is disabled. (Code 22)

  Click Enable device to enable this device.
  I can not activate a USB mass storage device and reading that a resource conflict may have caused to be disabled, what resources use USB mass storage device?

  Hello

  You can check this link:
  http://support.Microsoft.com/kb/310575f

• Peripheral mass storage USB is recognized as DVD player while the original disc is missing

  Hello

  I use windows vista Home premium (32 bit) on my HP pavilllion laptop. After getting updated for service pack 2 for vista my dvd player was absent. I was using Microsoft fixit to solve the problem and the use of the internet by wireless USB reliance data card and my laptop has recognized this usb mass storage device, dvd player and I have uninstalled this usb device several times as I tried to restore to their original factory condition, but my problem has not been resolved. Help, please

  Hi ss_gour,

  Please see an additional post that resembles your problem with a possible fix:

  http://social.technet.Microsoft.com/forums/en-us/itprovistahardware/thread/d416cfcd-366B-4B50-B976-29b5edc169c1/

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Problem ejecting USB Mass Storage Device [Unlocker doesn't work]

  Hey everybody,

  Just like everyone else, I get a pop-up message when trying to eject my external hard drive WD: "problem ejecting USB Mass Storage Device. Windows can't stop... "and so on." This does not work when I've only sailed on the disk, but it does, for example, when I made a mistake - check or make a backup. I already checked the forums, but unlike everyone else, third-party programs do not work for me.
  I did the following:

  -closed open task

  -disabled virus scanner

  -used Unlocker and Process Explorer, but he can't find any process that locks my drive. What happens here?

  -rebooted in safe mode

  -disabled indexing

  It makes me crazy that I have to restart whenever I want my drive to eject.

  Oh, and I use Windows 7.

  Can someone help me solve this problem?

  Hello

  (1) is limited to any specific USB device?

  (2) did you try to connect the device to a different USB port and check if you are facing a similar question?

  This problem may occur if there are handles open with all the files in the USB (Universal Serial Bus) mass storage device are in use by another program. Follow these methods and check if that helps.

  Method 1:

  I suggest you run the hardware and devices Troubleshooter to check if it helps.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  I suggest you to check and clean the boot if any third-party program is causing the problem.

   

  How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/929135

   

  Warning: After you used the clean boot in order to solve your problem follow step 7 to reset the computer to start as usual.

   

  Connecting and disconnecting USB devices:

   

  Most USB devices can be removed and disconnected at will. When you unplug the devices of storage, such as USB flash drives, you should be sure that the computer has finished saving all the information on the device before removing it. If the device has an activity light, wait a few seconds after the light has finished flashing before unplugging.

  If you see the icon remove the device safely in to the far right of the taskbar notification area, you can use this to ensure that devices have finished all operations in progress and are ready to remove. Click the icon and you will see a list of devices. Click the device you want to remove.

  You can use any USB port when you plug in a device you have installed beforehand. However, the first time you connect a device to a particular port, Windows will install the driver for this device again.

• USB device mass storage 10 - Cont error code

  Sorry, I don't know how to continue my previous question, so I paste below the previous question and Gerry's response:

  Thanks for the reply of Gerry. As Gerry susgested, I saved a copy of the information in the system from my computer on OneDrive: https://onedrive.live.com/redir?resid=726A7FEFBD5F1CD3! 106 & authkey =! AMZZ0M3BTwlvxx4 & ithint = the file % 2ctxt.  I do not know how to analyze it, so I need help. According to the information on my computer system information that I have provided, there can someone show me what to do to solve my problem?

  Concerning

  Leo MS

  My problem is:

  I do not have the new device connected to my computer, but there is a warning on the 'USB Mass Storage Device' Device Manager as USB controller. In fact no problem when I attached all my computer USB storage, it can still read file in there. This problem makes my computer need a lot of time to boot. Even if I disable your device (which has a warning about it) my computer need even more time to start. I tried all efforts:

  1. I tried to update the driver of the device, we want to, but it did not work.

  2. I uninstalled all USB controller devices, but it did not work.

  3. I tried 'MicrosoftFixit' tool, but it didn't work.

  Is it possible to fix this error? What happened to my computer? I need help.

  Best regards

  Leo MS

  It is Gerry's response

  To solve most computer problems, it allows to watch the evidence available in the system information file and Event Viewer logs. An experienced eye can choose needles in a haystack and see more clearly the precise nature of the problem or problems. Newspapers aren't necessary for your specific problem observer of events.

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download to your OneDrive (formerly Sky Drive), share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode.

  For assistance OneDrive see paragraph 9.3:
  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

  I hope this helps.

  Gerry
  Stourport, England

  Enquire the execution Plan

  Hi Leo,

  Thanks for the reply.

  Since it is a duplicate thread, you can continue to solve the problem in your previous post and you can refer to this section of the faq for more information on how to post a reply in the thread.

  Community Microsoft frequently asked Questions

  http://answers.Microsoft.com/en-us/page/FAQ

  Hope this information helps.

• Help blackBerry Smartphones! Mass storage works not even not load usb plugged!

  I just got my new bb "BOLD" of orange uk.

  and there is a problem, when I plug my phone into the usb port on my mac.

  I showed the clock for 2 seconds and return to the normal screen.

  no charge, no questions asked for mass storage.

  check my memory all that setting is correct.

  Also tried it on my pc, charing and can synchronize with DM

  But still cannot be used as mass storage.

  Why? who has the same problem

  I'm crying here, also the pocketmac works do not with my "BOLD"...

  pls help

  Hi and welcome to the forums!

  You may be better served to resolve this thread and open a new forum in the Blackberry MAC one.

  I'm sure that you will get more MAC expertise and specific answers.

  Thank you

  Make sure that the following options are set on your BB:

  WE window Media Card

  Encryption NO

  WE support mass storage

  Auto activate when connected YES

  Thank you

  Don't forget to adjust your thread. Put the check mark in the green box containing your answer! Thank you

• Impossible to safely remove external USB HDD - ejection of mass storage device problem

  Hello

  I have a 250 toshiba external hard drive. "When I go safely remove device and click on stop, guests me that ' ejection of mass storage device problem and try later.

  Is there a reason for this? As I have heard it is dangerous to pull the cord without stopping it first.

  This happens usually when something is always access to the USB - HDD.
  Yes, it s dangerous to pull on the cable, because you can lose some data and the file system may be damaged. But if you have a situation where you need the drive to take with you and want to just get out the cable to the USB port there is a little trick to disconnect the security apparatus:

  Do right click on 'My Computer'-> click on Hardware-> click "devicemanager"-> go into "diskdrives"-> then you need to click on the drive that is your USB - HDD-> with the right button and then click on 'Properties'-> in the menu properties of this drive, you must go on "policies" and click on "optimize for quick removal"-> and then click OK and exit this menu and all-> perform a reboot-> closing information fact. :)

  After that, it s safe for remove you your drive even if it s not ejected. :)

  Welcome them

• Installation question on Satellite M30 PSM30E USB mass storage device

  Hi people,

  I get an error message when I try to install new hardware on my laptop. Windows XP is trying to find the drivers and then comes up with the following error after a few minutes. The software starts to install but then comes with the following text:

  "There was a problem installing this device:"

  USB mass storage device
  An error occurred during the installation of the device
  These data are incorrect

  What happened with a USB card reader and my mobile. Once I have the error box I get a message saying that the device will not work properly?

  Anyone has any ideas at all?

  See you soon

  Hello

  What series of notebook or laptop model do you have?
  Could you please put the whole number? It would be very useful for further study.

  All the installation driver Toshiba must be made in the right order.
  In most cases, you would find a txt file of installation instruction on the Toshiba driver page.
  You must follow these instructions to ensure that all drivers would be executed correctly.

  Concerning

• Administrator has restricted this computer to access the USB/1394 mass storage devices

  This message just started showing unexpectedly. Sometimes windows load. It is not and has never been a business machine, so I am the administrator.

  He has blocked my external hard drive up and now won't let me even to read a memory stick. In this case, I get «the administrator has denied access to USB/1394 mass storage devices»

  I searched through everything, and everything seems ok. I ran several controls of virus and spyware checks, but all come clean.

  I hope someone can help me. Thank you.

  You use Acer computer?

  If so, then uninstall: Acer LanScope or update and see if that resolve the problem.

• USB mass storage shows as removable disk. When I have the Explorer, it insists on the fact that I have inserted a disc.

  Original title: USB mass storage shows as removable disk

  an external hard drive appear in devices such as a USB media device, but in Explorer windows as a removable drive; When I have the Explorer, it insists on the fact that I have inserted a disc.

  After a windows upgrade restarted the computer, windows Explorer showed the USB mass storage. Everything is OK.

  Thank you.

• Passport Mass Storage Device does not appear to the top, when I plugged in the USB Port on Windows XP

  I have connected my passport mass storage device to a USB port and it notifies as new hardware, but it did not show in my computer anywhere. However, I installed and uninstalled several times my computer.

  Hello

  1. what happens when you plug the device to your computer, you get an error message?

  2. don't you make changes to the computer until the problem occurred?

  I suggest you try the steps mentioned below and check if it helps.

  Method 1:

   Try to connect the Passport mass storage device into the other USB port or try to connect the Passport mass storage device in another computer and verify that the problem persists.

  Method 2: Try running the Fixit tool from the link below.

  Hardware devices do not work or are not detected in Windows:
  http://support.Microsoft.com/GP/hardware_device_problems

  Method 3: Also try to follow the steps from the link below.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive: http://support.microsoft.com/kb/925196

  Hope this information is useful.

• ProBook 350 G1/F7Y90EA: USB mass storage device driver

  Please help to install driver!

  Do not see my 350 Pro Notebook USB 3.0 Flash. He early find, but do not work automatically and he lost.

  See the problem in the USB mass storage device driver.

  I tried to put in day, but Win can't find this driver...

  External disk HARD 3.0 works. USB 2.0 works in all usb ports. But USB 3.0 - no flash (this is new).

  I tried to find the driver on the support page, but I couldn't find it.

  Thanks in advance!

  Lyuba wrote:

  Please help to install driver!

  Do not see my 350 Pro Notebook USB 3.0 Flash. He early find, but do not work automatically and he lost.

  See the problem in the USB mass storage device driver.

  I tried to put in day, but Win can't find this driver...

  External disk HARD 3.0 works. USB 2.0 works in all usb ports. But USB 3.0 - no flash (this is new).

  I tried to find the driver on the support page, but I couldn't find it.

  Thanks in advance!

  Are you sure that the USB is not bad? Also have you tried on some other computer USB3 ports to see if those who can see the drive? Looks like your USB is not USB3 if it can read the disk HARD USB3 but not the USB3 Flash in question. Also make sure that your laptop ports are USB3 ports? In the contrary case, we owe this: to check if the ports are USB3...

  How can I find my model number or product number?