Wireless and VPN RV042 router WRT54G

Similar Questions

• PIX 501 and VPN Linksys router (WRV200)

  I inherited a work where we have a Cisco PIX 501 firewall to a single site and Linksys WRV200 Router VPN on two other

  sites. Asked me to connect these routers Linksys firewall PIX via the VPN.

  According to me, the Linksys vpn routers can only connect via IPSec VPN, I'm looking for help on the configuration of the PIX 501 for the linksys to connect with the following, if possible.

  Key exchange method: Auto (IKE)

  Encryption: Auto, 3DES, AES128, AES192, AES256

  Authentication: MD5

  Pre Shared Key: xxx

  PFS: Enabled

  Life ISAKMP key: 28800

  Life of key IPSec: 3600

  The pix, I installed MDP and I tried to use the VPN wizard without result.

  I chose the following settings when you make the VPN Wizard:

  Type of VPN: remote VPN access

  Interface: outside

  Type of Client VPN device used: Cisco VPN Client

  (can choose customer of Cisco VPN 3000, MS Windows Client by using the client MS Windows using L2TP, PPTP)

  VPN clients group

  Name of Group: RabyEstates

  Pre Shared Key: rabytest

  Scope of the Client authentication: disabled

  Address pool

  Name of the cluster: VPN - LAN

  Starter course: 192.168.2.200

  End of row: 192.168.2.250

  Domain DNS/WINS/by default: no

  IKE policy

  Encryption: 3DES

  Authentication: MD5

  Diffie-Hellman group: Group 2 (1024 bits)

  Transform set

  Encryption: 3DES

  Authentication: MD5

  I have attached the log of the VPN Linksys router VPN.

  This is the first time that I have ever worked with PIX so I'm still trying to figure the thing to, but I'm confident with the CCNA level network.

  Thanks for your help!

  Hello

  Everything looks fine for me, try to have a computer in every network and ping between them. Check the newspapers/debug and fix them.

  Let me know.

  See you soon,.

  Daniel

• Photosmart C4580 HP dv7 notebook wirelessly and not a router...

  Hello

  I bought one for features wireless Photosmart c4580 because we are on the road a lot, but I can't seem to set up.

  I have a broadband connection to the usb Pantech Verizon for internet and I guess it does not recognize that.

  How would I go all setting this up with my HP dv7 laptop with Vista 64 without router?

  I use Norton Internet security. Don't know what the hell I do

  Thanks for the help ():

  Thank you so much, Jim B, for your time. I appreciate it! Your instructions worked and the printer print wireless!  Fortunately, I have to print all day.

  Have a nice day, Jan

• ASA VPN server and vpn client router 871

  Hi all

  I have ASA 5510 as simple VPN server and 871 router as simple VPN client. I want to have the user ID and permanent password on 871 and not to re - enter username and password since 871 uses dynamic IP address and every time I have to ' cry ipsec client ezvpn xauth "and type user name and password.

  any suggestions would be much appreciated.

  Thank you

  Alex

  Do "crypto ipsec client ezvpn show ' on 871, does say:

  ...

  Save password: refused

  ...

  ezVPN server dictates the client if it can automatically connect with saved password.

  Set "enable password storage" under the group policy on the ASA.

  Kind regards

  Roman

• 1710 VPN and VPN Client - routing problem '' maybe. ''

  Hello

  I was able to get with 3DES and CISCO VPN Client 3.6.1 1710. with permission of local aaa.

  When I am connected to the VPN I can ping to the IP address of the VPN router

  (24.x.x.x.) and I can ping to the router's internal interface (192.168.x.x).

  The problem is that I can't ping anything else - for example: hosts in the enterprise network (192.168.x.x).

  Configuration:

  The router's internal IP address: 192.168.x.x

  The router's external IP address: 24.x.x.x

  ippool for customers: 10.10.10.x

  The IP address of the Client after the connection is correct: 10.0.0.x (from pool)

  Maybe I'm missing something in 1710 confg? I have NAT interface internal? The default gateway of the net is FreeBSD, not the router of 1710 system.

  All ideas are welcome.

  Miro Pendev

  TI Administrstor

  Quite often, you will lose the first ping because an ARP must be sent and responded to, but if you get the subsequent pings, then it's OK.

  For what is able to browse the Internet while the tunnel is up, you must enable split tunneling. Add the following:

  > access-list 110 permit ip 192.168.1.0 0.0.0.255 192.168.1.0 0.0.0.255

  > isakmp crypto client configuration group my_usergroup

  > acl 110

  This means that the client will only encrypt the traffic to the 192.168.1.0 network, all other traffic shuts down in the clear on the Internet.

• WRVS4400N with AG300 and VPN connections

  I bought a WRVS4400N router hoping to add wireless and VPN capability at a remote office LAN. I want to be able to establish a VPN connection from my PC to the central office to the WRVS4400N to remote desktop, access and administer systems at the remote office. Remote desktop systems is unnecessary access to systems to the central office.

  Before you deploy the WRVS4400N to remote desktop, I'm stable and by configuring it to our central office.

  Our central office is a router Linksys AG300 and ADSL service for Internet connection. It works well and I don't want to change it.

  I have connected the WRVS4400N to our central office LAN and it has an IP address on its WAN port assigned by the DHCP server on the AG300.

  What I do not understand how to establish a VPN connection to a system on the Internet at the WRVS4400N on the local network. I have a laptop with the QuickVPN software installed. If I connect my laptop to the AG300 (i.e. the same switch as the WAN port on the WRVS4400N) I can establish a VPN connection to the WRVS4400N but if I connect to my laptop to the Internet (via my ADSL service at home), I am unable to set up the VPN. I don't know how to configure the AG300 so that the VPN from my laptop reaches the WRVS4400N.

  I transfer ipsec enabled on the AG300, but this does not seem to run the VPN with the WRVS4400N.

  Can someone tell me what I need to do?

  Is there some other DSL modem I could use that facilitates the connection? There is another DSL modem (I don't know make/model until I visit the site) used in remote desktop, but I could replace it if I knew that the replacement work.

  Update: I got it to work. See https://supportforums.cisco.com/thread/2108785 for the advice that has been most useful.

  The essential steps have been before the ports indicated in this article (and UDP 500) to the WRVS4400N and I dropped a bit of the MTU (do not know if this was really necessary). Now I can establish connection QuickVPN, except when the Windows Firewall interferes.

  Hello

  Thank you for posting. In the AG300, transmit the following ports to the IP address of the WAN WRVS4400N port: 443, 500, 4500, 60443. This allows you to establish a QuickVPN for the WRVS4400N using the WAN IP of the AG300.

• Router and VPN Client for Internet Public on a matter of stick

  I try to follow the http://www.cisco.com/en/US/products/sw/secursw/ps2308/products_configuration_example09186a008073b06b.shtml to allow VPN clients to receive their internet connection instead of tunneling while split. Internal resources are available, but the internet does not work when a client is connected? It seems that the VPN clients are not translated.

  !
  crypto ISAKMP policy 3
  BA 3des
  preshared authentication
  Group 2
  !
  crypto ISAKMP policy 10
  preshared authentication
  ISAKMP crypto key address x.x.x.x No.-xauth KeyString
  !
  ISAKMP crypto group customer VPN-users configuration
  KeyString key
  DNS 208.67.222.222 208.67.220.220
  domain domain.com
  pool VPN_POOL
  include-local-lan
  netmask 255.255.255.0
  Crypto isakmp IKE-PROFILE profile
  game of identity VPN-users group
  client authentication list default
  Default ISAKMP authorization list
  initiate client configuration address
  client configuration address respond
  virtual-model 1
  !
  !
  Crypto ipsec transform-set ESP-SHA-3DES esp - aes 256 esp-sha-hmac
  !
  Profile of crypto ipsec IPSEC_PROFILE1
  game of transformation-ESP-3DES-SHA
  Isakmp IKE PROFILE set
  !
  !
  crypto dynamic-map 10 DYNMAP
  game of transformation-ESP-3DES-SHA
  market arriere-route
  !
  !
  map CLIENTMAP client to authenticate crypto list by default
  map CLIENTMAP isakmp authorization list by default crypto
  crypto map CLIENTMAP client configuration address respond
  map CLIENTMAP 1 ipsec-isakmp crypto
  defined peer x.x.x.x
  game of transformation-ESP-3DES-SHA
  PFS Group1 Set
  match address 100
  map CLIENTMAP 10-isakmp dynamic DYNMAP ipsec crypto
  !
  Archives
  The config log
  hidekeys
  !
  !
  controller T1 2/0
  framing sf
  friend linecode
  !
  property intellectual ssh authentication-2 retries
  !
  !
  !
  !
  interface Loopback0
  IP 192.168.100.1 address 255.255.255.0
  no ip unreachable
  IP nat inside
  IP virtual-reassembly
  !
  !
  Null0 interface
  no ip unreachable
  !
  interface FastEthernet0/0
  Description $ETH - WAN$ $FW_OUTSIDE$
  IP address dhcp customer_id FastEthernet0/0 hostname 3725router
  IP access-group 104 to
  no ip unreachable
  NAT outside IP
  inspect the SDM_LOW over IP
  sdm_ips_rule IP IP addresses in
  IP virtual-reassembly
  route SDM_RMAP_1 card intellectual property policy
  automatic duplex
  automatic speed
  map CLIENTMAP crypto
  !
  interface Serial0/0
  Description $FW_OUTSIDE$
  the IP 10.0.0.1 255.255.240.0
  IP access-group 105 to
  Check IP unicast reverse path
  no ip unreachable
  inspect the SDM_LOW over IP
  IP virtual-reassembly
  Shutdown
  2000000 clock frequency
  map CLIENTMAP crypto
  !
  interface FastEthernet0/1
  no ip address
  no ip unreachable
  IP virtual-reassembly
  automatic speed
  full-duplex
  !
  interface FastEthernet0/1.2
  Description $FW_INSIDE$
  encapsulation dot1Q 2
  172.16.2.1 IP address 255.255.255.0
  IP access-group 101 in
  no ip unreachable
  IP nat inside
  IP virtual-reassembly
  enable IPv6
  !
  interface FastEthernet0/1.3
  Description $FW_INSIDE$
  encapsulation dot1Q 3
  172.16.3.1 IP address 255.255.255.0
  IP access-group 102 to
  no ip unreachable
  IP nat inside
  IP virtual-reassembly
  enable IPv6
  !
  interface FastEthernet0/1.10
  Description Vlan wireless comments
  encapsulation dot1Q 100
  172.16.100.1 IP address 255.255.255.0
  IP access-group out 110
  no ip unreachable
  IP nat inside
  IP virtual-reassembly
  !
  interface FastEthernet0/1.50
  Description $Phones$
  encapsulation dot1Q 50
  IP 172.16.50.1 255.255.255.0
  IP virtual-reassembly
  !
  interface Serial0/1
  no ip address
  no ip unreachable
  Shutdown
  2000000 clock frequency
  !
  interface Serial0/2
  no ip address
  Shutdown
  !
  interface Serial0/3
  no ip address
  Shutdown
  !
  interface Serial1/0
  no ip address
  Shutdown
  !
  BRI2/0 interface
  no ip address
  IP virtual-reassembly
  encapsulation hdlc
  Shutdown
  !
  type of interface virtual-Template1 tunnel
  Description $FW_INSIDE$
  IP unnumbered Loopback0
  IP access-group 103 to
  no ip unreachable
  IP virtual-reassembly
  ipv4 ipsec tunnel mode
  Tunnel IPSEC_PROFILE1 ipsec protection profile
  !
  local IP 192.168.0.100 VPN_POOL pool 192.168.0.105
  IP forward-Protocol ND
  IP route 172.16.200.0 255.255.255.252 172.16.2.3
  !
  !
  IP http server
  local IP http authentication
  IP http secure server
  IP http timeout policy inactive 600 life 86400 request 10000
  translation of nat IP udp-timeout 900
  IP nat inside source map route SDM_RMAP_1 interface FastEthernet0/0 overload
  !
  logging source hostname id
  record 172.16.3.3
  access-list 100 permit ip 172.16.2.0 0.0.0.255 172.16.10.0 0.0.0.255
  access-list 100 permit ip 172.16.2.0 0.0.0.255 172.31.12.0 0.0.0.255
  Remark SDM_ACL category of access list 101 = 17
  access-list 101 permit ahp any host 172.16.2.1
  access-list 101 permit esp any host 172.16.2.1
  access-list 101 permit udp any host 172.16.2.1 eq isakmp
  access-list 101 permit udp any host 172.16.2.1 eq non500-isakmp
  access-list 101 permit ip 172.31.12.0 0.0.0.255 172.16.2.0 0.0.0.255
  access-list 101 deny ip 10.0.0.0 0.0.15.255 no matter what newspaper
  access-list 101 deny ip 192.168.0.0 0.0.0.255 any what newspaper
  access-list 101 deny ip 172.16.3.0 0.0.0.255 any what newspaper
  access-list 101 deny ip 255.255.255.255 host no matter what paper
  access-list 101 deny ip 127.0.0.0 0.255.255.255 any what newspaper
  access-list 101 tcp refuse any any newspaper of chargen Place1
  access-list 101 tcp refuse any any eq whois newspaper
  access-list 101 tcp refuse any any eq 93 newspaper
  access-list 101 tcp refuse any any newspaper of the 135 139 range
  access-list 101 tcp refuse any any eq 445 newspaper
  access-list 101 tcp refuse any any newspaper exec 518 range
  access-list 101 tcp refuse any any eq uucp log
  access list 101 ip allow a whole
  access-list 101 deny ip 172.16.100.0 0.0.0.255 any what newspaper
  access-list 102 deny ip 172.16.2.0 0.0.0.255 any what newspaper
  access-list 102 deny ip 10.0.0.0 0.0.15.255 no matter what newspaper
  access-list 102 deny ip 192.168.0.0 0.0.0.255 any what newspaper
  access-list 102 refuse host 255.255.255.255 ip no matter what paper
  access-list 102 deny ip 127.0.0.0 0.255.255.255 any what newspaper
  access ip-list 102 permit a whole
  access-list 103 deny ip 172.16.2.0 0.0.0.255 any
  access-list 103 deny ip 10.0.0.0 0.0.15.255 everything
  access-list 103 deny ip 172.16.3.0 0.0.0.255 any
  access-list 103 refuse host ip 255.255.255.255 everything
  access-list 103 deny ip 127.0.0.0 0.255.255.255 everything
  103 ip access list allow a whole
  Note access-list 104 SDM_ACL category = 17
  access-list 104 allow the host ip 192.168.0.100 everything
  access-list 104 allow the host ip 192.168.0.101 everything
  access-list 104 allow the host ip 192.168.0.102 everything
  access-list 104 allow the host ip 192.168.0.103 everything
  104 allow host 192.168.0.104 ip access-list all
  access-list 104 allow the host ip 192.168.0.105 everything
  access-list 104. allow ip 172.16.10.0 0.0.0.255 172.16.2.0 0.0.0.255
  access-list 104 allow host ip 192.168.0.100 172.16.0.0 0.0.255.255
  access-list 104 allow host 192.168.0.101 ip 172.16.0.0 0.0.255.255
  access-list 104 allow host 192.168.0.102 ip 172.16.0.0 0.0.255.255
  access-list 104 allow host ip 192.168.0.103 172.16.0.0 0.0.255.255
  access-list 104 allow host 192.168.0.104 ip 172.16.0.0 0.0.255.255
  access-list 104 allow host ip 192.168.0.105 172.16.0.0 0.0.255.255
  access-list 104. allow ip 172.31.12.0 0.0.0.255 172.16.2.0 0.0.0.255
  access-list 104 permit udp host 205.152.132.23 eq field all
  access-list 104 permit udp host 205.152.144.23 eq field all
  Access-list 104 remark Auto generated by SDM for NTP 129.6.15.29 (123)
  access-list 104 permit udp host 129.6.15.29 eq ntp ntp any eq
  access-list allow 104 of the ahp an entire
  access-list 104 allow esp a whole
  access-list allow 104 a 41
  access-list 104 permit udp any any eq isakmp
  access-list 104 permit udp any any eq non500-isakmp
  access-list 104 deny ip 10.0.0.0 0.0.15.255 no matter what newspaper
  access-list 104 deny ip 172.16.2.0 0.0.0.255 any what newspaper
  access-list 104 deny ip 192.168.0.0 0.0.0.255 any what newspaper
  access-list 104 deny ip 172.16.3.0 0.0.0.255 any what newspaper
  access-list 104 permit udp any eq bootps any eq bootpc
  access-list 104 permit icmp any any echo response
  access-list 104 permit icmp any one time exceed
  access-list 104 allow all unreachable icmp
  access-list 104 permit icmp any any echo
  access-list 104 refuse icmp any any newspaper mask-request
  access-list 104 refuse icmp any any redirect newspaper
  access-list 104 deny ip 10.0.0.0 0.255.255.255 any what newspaper
  access-list 104 deny ip 172.16.0.0 0.15.255.255 no matter what newspaper
  access-list 104 deny ip 192.168.0.0 0.0.255.255 any what newspaper
  access-list 104 deny ip 127.0.0.0 0.255.255.255 any what newspaper
  104 refuse 224.0.0.0 ip access-list 15.255.255.255 no matter what newspaper
  104 refuse host 255.255.255.255 ip access-list no matter what paper
  access-list 104 tcp refuse any any newspaper of the range 6000-6063
  access-list 104 tcp refuse any any eq newspaper 6667
  access-list 104 tcp refuse any any 12345 12346 range journal
  access-list 104 tcp refuse any any eq 31337 newspaper
  access-list 104 deny udp any any eq 2049 newspaper
  access-list 104 deny udp any any eq 31337 newspaper
  access-list 104 deny udp any any 33400 34400 range journal
  access-list 104 deny ip any any newspaper
  Note access-list 105 SDM_ACL category = 17
  access-list 105 allow the host ip 192.168.0.100 everything
  access-list 105 allow the host ip 192.168.0.101 everything
  access-list 105 allow the host ip 192.168.0.102 everything
  access-list 105 allow the host ip 192.168.0.103 everything
  access-list 105 192.168.0.104 ip host allow all
  access-list 105 allow the host ip 192.168.0.105 everything
  access-list 105 host ip 192.168.0.100 permit 172.16.0.0 0.0.255.255
  access-list 105 host ip 192.168.0.101 permit 172.16.0.0 0.0.255.255
  access-list 105 host ip 192.168.0.102 permit 172.16.0.0 0.0.255.255
  access-list 105 host ip 192.168.0.103 permit 172.16.0.0 0.0.255.255
  access-list 105 192.168.0.104 ip host permit 172.16.0.0 0.0.255.255
  access-list 105 host ip 192.168.0.105 permit 172.16.0.0 0.0.255.255
  access-list 105 allow ip 172.31.12.0 0.0.0.255 172.16.2.0 0.0.0.255
  access-list 105 permit udp any host 10.0.0.1 eq non500-isakmp
  access-list 105 permit udp any host 10.0.0.1 eq isakmp
  access-list 105 allow esp any host 10.0.0.1
  access-list 105 allow ahp any host 10.0.0.1
  access-list 105 permit udp host 129.6.15.29 eq ntp host 10.0.0.1 eq ntp
  access-list 105 allow ahp 10.0.0.2 10.0.0.1 host
  access-list 105 allow esp 10.0.0.2 10.0.0.1 host
  access-list 105 permit udp host 10.0.0.2 10.0.0.1 host eq isakmp
  access-list 105 permit udp host 10.0.0.2 10.0.0.1 host eq non500-isakmp
  access-list 105 allow ip 172.16.10.0 0.0.0.255 172.16.2.0 0.0.0.255
  access-list 105 permit udp host 10.0.0.2 host 172.16.2.10 eq tftp
  access-list 105 permit udp host 10.0.0.2 host 172.16.2.5 eq syslog
  access-list 105 deny ip 172.16.2.0 0.0.0.255 any
  access-list 105 deny ip 192.168.0.0 0.0.0.255 any
  access-list 105 deny ip 172.16.3.0 0.0.0.255 any
  access-list 105 permit icmp any host 10.0.0.1 echo-reply
  access-list 105 permit icmp any host 10.0.0.1 exceeded the time
  access-list 105 permit icmp any host 10.0.0.1 inaccessible
  access-list 105 deny ip 10.0.0.0 0.255.255.255 everything
  access-list 105 deny ip 172.16.0.0 0.15.255.255 all
  access-list 105 deny ip 192.168.0.0 0.0.255.255 everything
  access-list 105 deny ip 127.0.0.0 0.255.255.255 everything
  105 refuse host 255.255.255.255 ip access-list all
  access-list 105 refuse host ip 0.0.0.0 everything
  access-list 105 deny ip any any newspaper
  access-list 110 deny ip 172.16.2.0 0.0.0.255 any
  access-list 110 deny ip 172.16.3.0 0.0.0.255 any
  access ip-list 110 permit a whole
  access-list 115 permit ip 172.16.0.0 0.0.255.255 everything
  access-list 115 permit ip 192.168.0.0 0.0.0.255 any
  access-list 120 deny ip 172.16.0.0 0.0.255.255 192.168.0.0 0.0.0.255
  access-list 120 allow ip 172.16.0.0 0.0.255.255 everything
  access-list 150 deny ip 172.16.0.0 0.0.255.255 host 192.168.0.100
  access-list 150 deny ip 172.16.0.0 0.0.255.255 welcome 192.168.0.101
  access-list 150 deny ip 172.16.0.0 0.0.255.255 welcome 192.168.0.102
  access-list 150 deny ip 172.16.0.0 0.0.255.255 welcome 192.168.0.103
  access-list 150 deny ip 172.16.0.0 0.0.255.255 welcome 192.168.0.104
  access-list 150 deny ip 172.16.0.0 0.0.255.255 welcome 192.168.0.105
  access-list 150 deny ip 172.16.2.0 0.0.0.255 172.31.12.0 0.0.0.255
  access-list 150 permit ip 172.16.2.0 0.0.0.255 any
  access-list 150 permit ip 172.16.3.0 0.0.0.255 any
  access-list 150 permit ip 192.168.0.0 0.0.0.255 any
  public RO SNMP-server community
  IPv6 route: / 0 Tunnel0
  !
  !
  !
  allowed SDM_RMAP_1 1 route map
  corresponds to the IP 150
  set ip next-hop 192.168.100.2
  !
  SDM_RMAP_1 allowed 10 route map
  corresponds to the IP 150
  set ip next-hop 192.168.100.2

  Based on my own tests in the laboratory, you can do this with and without a routing policy.  You can configure the road of politics on the virtual template interface and direct traffic to the closure where ip nat inside is enabled, or you can simply configure ip nat inside on the interface of virtual model and remove the routing strategy.

  crypto ISAKMP policy 3
  BA 3des
  preshared authentication
  Group 2

  ISAKMP crypto cisco123 key address 0.0.0.0 0.0.0.0

  ISAKMP crypto group customer VPN-users configuration
  key cisco123
  DNS 208.67.222.222 208.67.220.220
  domain domain.com
  pool VPN_POOL
  include-local-lan
  netmask 255.255.255.0
  Crypto isakmp IKE-PROFILE profile
  game of identity VPN-users group
  client authentication list default
  Default ISAKMP authorization list
  initiate client configuration address
  client configuration address respond
  virtual-model 1

  Crypto ipsec transform-set ESP-SHA-3DES esp - aes 256 esp-sha-hmac

  Profile of crypto ipsec IPSEC_PROFILE1
  game of transformation-ESP-3DES-SHA
  Isakmp IKE PROFILE set

  crypto dynamic-map 10 DYNMAP
  game of transformation-ESP-3DES-SHA
  market arriere-route
  !
  !
  map CLIENTMAP 10-isakmp dynamic DYNMAP ipsec crypto

  interface GigabitEthernet0/0
  IP 1.1.1.1 255.255.255.0
  NAT outside IP
  IP virtual-reassembly
  automatic duplex
  automatic speed
  media type rj45
  map CLIENTMAP crypto

  type of interface virtual-Template1 tunnel
  IP unnumbered GigabitEthernet0/0
  IP nat inside
  IP virtual-reassembly
  ipv4 ipsec tunnel mode
  Tunnel IPSEC_PROFILE1 ipsec protection profile

  local IP 192.168.0.100 VPN_POOL pool 192.168.0.105

  overload of IP nat inside source list 150 interface GigabitEthernet0/0

  access-list 150 deny ip 172.16.0.0 0.0.255.255 host 192.168.0.100
  access-list 150 deny ip 172.16.0.0 0.0.255.255 welcome 192.168.0.101
  access-list 150 deny ip 172.16.0.0 0.0.255.255 welcome 192.168.0.102
  access-list 150 deny ip 172.16.0.0 0.0.255.255 welcome 192.168.0.103
  access-list 150 deny ip 172.16.0.0 0.0.255.255 welcome 192.168.0.104
  access-list 150 deny ip 172.16.0.0 0.0.255.255 welcome 192.168.0.105
  access-list 150 deny ip 172.16.2.0 0.0.0.255 172.31.12.0 0.0.0.255
  access-list 150 permit ip 172.16.2.0 0.0.0.255 any
  access-list 150 permit ip 172.16.3.0 0.0.0.255 any
  access-list 150 permit ip 192.168.0.0 0.0.0.255 any

  ***************************************************************************************

  Inside global internal local outside global local outdoor Pro
  ICMP 1.1.1.1:1 192.168.0.102:1 4.2.2.2:1 4.2.2.2:1

• Wireless printer Lexmark X 4850 and a netgear router that does not connect while I can print

  Rookie PC user...

  I have a Lexmark X 4850 wireless printer and a netgear router that does not connect while I can print ggggrrrr....!
  I checked all plugs and connections, the reboot several times and am about to throw it out the window... Help!

  Hello

  Welcome to the Microsoft Community and thanks for posting the question.

  According to the description, it looks like the wireless Lexmark X 4850 printer is not to connect to the wireless router.

  Visit this link that should help you with this problem.

  http://support.Lexmark.com/index?page=content&ID=FA697&locale=en&UserLocale=en

  Note: Using third-party software or the link, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third party software or link can be resolved. Using third-party software, or the link is at your own risk.

  If this fails to resolve the problem, visit this link and read "need help?"

  http://www1.Lexmark.com/us/en/view/printers%20&%20MultiFunction/Lexmark-X4850/CATID=cat170005-category&prodId=4145-product

  I hope this helps. If you have questions more related to Windows, feel free to post here at Microsoft Community.

• Wireless and wired router, DHCP and "visibility".

  Okay, it's a bit complicated, but I'll explain better than I can.

  I have a wired Linksys RV082 router. It works very well but is not wireless.  I have a Cisco/Linksys E2500 wireless router for my wireless devices to use.  the RV082 is the network of 192.168.1.x. The E2500 is the network of 192.168.0.x.  Cable Internet goes to the RV082 Wired, and a line out from there to the wireless router.  This all works fine except for a few disadvantages.

  I have an iPad that connects wireless and some of the apps offer a http:// option, so I can transfer files to this application.  I also have a network printer connected to wired and wireless devices do not.

  I have 2 problems:

  (1) in order to transfer files from my laptop (that I hung on the cable network most of the time), I disconnect the wire, wireless, then I can transfer files.  Œuvres, but it's embarrassing.

  (2) I want a netbook that I have on the wireless connection to print on my printer wired network.

  It seems that the 2 networks do not see each other.  Here are the things I've tried:

  (1) I disabled DHCP on the wireless router.  My thought is that requests for an IP address to the wireless router has sent will be transmitted along my wired router... NOT.  On my iPad and Wii, they could no longer connect wirelessly. Strangely enough, with the disconnected wire and wireless connection with my laptop, I've still was getting a 192.168.0.x IP address, even if the DHCP service is disabled on the wireless router.

  (2) thinking I would put manually the wireless router on the 192.168.1.x network, instead of saying things to get an Internet connection IP dynamicaly, I manually the IP value is 192.168.1.245.  Serious mistake.  I couldn't connect at all anywhere then.  The only way I could fix it was to hang on to my laptop computer, assign a static IP address to my laptop on the same network as the router, then I was able to get to the configuration page and to put things like he was.

  Another thing... Even when I'm connected only plugged on my laptop and wireless is disabled, I ping 192.168.0.1 (the wireless gateway) and it returns a value. But, when I try to go in a browser, I get a "page not found" error

  So, how can I get these two networks to play well and see each other?

  Thank you

  Jesse

  Put the router E2500 'bridge' mode and it will transmit the RV082.

  Assign E2500 DHCP, an IP address for itself of thje RV082, it will just be for access to the web administration E2500. System powered via the E2500 wired or wireless IP addresses will be obtained from the DHCP server on the RV082, and these will all be on the same subnet as designed to be plugged into the side of the RV082 LAN.

  Should allow you to do exactly what you want to do.

  I have a similar setup here works well with an E4200V2 right now.

• Setting up Port Forwarding on router WRT54G, working with a WVC54GCA Wireless CAmers

  I have the equipment in question and you need to know a few things when it come to put in place for Internet access. Before I aske the question, however, I have the following IP addresses associated with this project: WVC54GCA - 192.168.2.102, router WRT54G - 192.168.2.1, the questions are:

  1. How do you define Port Forwarding on every element.
  2. Should the two articles have static IP addresses.
  3. Once the port forwarding is set, what is the structure of the URL to access the camera?

  Any help would be appreciated, summer tear my hair on it. Seems simple, but obviously not. I'm missing something.

  Thank you

  For port forwarding, you will first need to set the camera to a fixed LAN IP address (static).

  If your router uses the range of 192.168.2.100 thanks 192.168.2.149 DHCP servers, then 192.168.2.102 is an unauthorised fixed address.  With the Linksys routers, any fixed LAN IP address must be outside the range of the DHCP server.

  Here are the rules of use of the fixed LAN IP addresses with Linksys routers.  (Note: these rules were written for the 192.168.1.x subnet.)  Since you're using the 192.168.2.x subnet, change all addresses accordingly):

  With Linksys, routers, a fixed (static) IP LAN addresses must be assigned in the device that uses the address. If you need to enter the fixed address to the computer, printer or camera, not in the router.

  When you use a Linksys router, any fixed LAN IP address must be outside the DHCP server rank (typically 192.168.1.100 thru 192.168.1.149), and may not end with 0, 1 and 255.

  That's why any fixed LAN IP address would normally be of the order of
  192.168.1.2 thru 192.168.1.99 or
  192.168.1.150 thru 192.168.1.254
  assuming that you always use the default DHCP server line.

  In addition, in the computer, when you configure a static LAN IP address, you need to set the "Subnet mask" 255.255.255.0 and the 'default gateway' on 192.168.1.1 and "DNS server" to 192.168.1.1.  Note that some network devices can not use server proxy DNS at 192.168.1.1.  In this case, the value "DNS server" your real address of Internet DNS server (found in the router when connected to the Internet).

  It is also important that the same value static LAN IP address no two devices on your network.

  **********************

  After you gave your camera at a fixed LAN IP address, then go in "Port Redirection" in the router and configuring the ports one (or more) to the address LAN IP fixed camera.

  In order to access your camera from the Internet, you will need to either:

  (1) get a fixed Internet IP address (static) address from your ISP and configure your router to use this address, or

  (2) use a free service such as DDNS.  DDNS allows you to use a dynamic Internet IP address, but can connect you by using the same URL.

  I hope this helps.

• Wireless acting funny after having removed the PC on the home network - router WRT54G

  Lately I had a strange problem with my wireless. Internet works fine on my laptop and computer laptop of my fiance, but I have the following questions:

  1 Vonage phone works not properly. When the phone rings, it rings a very long cycle, and then when we pick up, the line is dead.

  2 X - Box Live connection interrupts the connection once every 2 or 3 minutes about, constantly.

  3. I can't connect to my linksys config site, and when I ping 198.168.1.1, I get 100% packet loss.

  Here is my situation and how it has changed recently Wireless:

  Set - original up: Desktop connected to the linksys router, laptop of fiance the wireless, no problem at this stage. The modem is Motorola if it matters. Office calculated was used initially to set up the wireless network.

  Computer for office died and I bought my current laptop (which I use to write this post). I connected to the wireless network without existing, although during the first week, there was some notable slowly down on me and my fiance wireless from time to time. I played around with some parameters in the linksys config page and reset the router and things are back to normal.

  However, I recently bought an xbox wireless adapter and was very disappointed by the loss of connection. When I test the connection it says I am connected but my "NAT" is moderate. My config is set so that uPNP is enabled, but I still have this problem. At the same time, we noticed that our Vonage has been screwed up and had the above mentioned problem.

  Today, I tried to connect to the site 192.168.1.1 to access my linksys config page, but I can't access it and as I said, when I ping the IP, I got 100% packet loss.

  I'm at a total loss about what to do and I do not understand how internet our computer can act very well while having all these problems with XBL and Vonage.

  Any help is GREATLY appreciated. Please tell me if you need info to Add ' l and I'm going there as soon as POSSIBLE.

  To check the address IP connect a computer/laptop computer directly to the router on its ethernet port and click on Start > all programs > Accessories > guest... A black box will appear (command prompt)... In the command prompt window type ipconfig and press "Enter"... Look for Ethernet adapter Local Area Connection address IP, subnet mask, and default gateway...

  The address of a default gateway should be the IP address of your router...

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - x.x.x.x (where x.x.x.x is the default gateway address), and then on enter. Let the empty user name & password use admin lowercase... It should open the configuration of your router... If it does not accept the default user name or the password then you need to reset your router to the factory settings...

  Press and hold the button of reset for 30 seconds... Release the reset button... Unplug the power cable from your router, wait 30 seconds and reconnect the power cable... Now re - configure your router...

  If your Internet Service is cable follow this link

  If your Internet Service is DSL follow this link

  To open the NAT-

  Click on the tab "Games and Applications" and then click the sub-tab "Port Range Forwarding"...

  (1) on the first line in the box, type Application in ABC, in the start box, type in 53 and the type of box in 53, leave the Protocol as and under type 192.168.1.20 ip address and check the box to enable...

  (2) on the second line in the box, type Application in PQR, in the start box, type 88 and type of box in 88, leave the Protocol as and under type 192.168.1.20 ip address and check the box to enable...

  (3) on the third line in the box, type Application in XYZ, in the start box, type in 3074 and end in 3074 box type, leave the Protocol as and under type 192.168.1.20 ip address and check the enable box and click on save settings...

  (4) once you return to the game to the top page, click the Security tab and uncheck block anonymous Internet requests and click on save settings...

  5) click on Setup and change the size of the MTU to 1452 and click on save settings...

  (6) address IP, Goto settings XBox network settings and assign the following on your Xbox and select manual IP settings
  IP address:-192.168.1.20, subnet mask:-255.255.255.0 default gateway:-192.168.1.1...

  (7) also assign addresses DNS on Xbox
  Primary DNS:-4.2.2.2... Secondary dns:-192.168.1.1

  (8) turn off your modem, router and Xbox... Wait a minute...

  (9) plug the power to the modem first, wait a minute and plug the router power cable, wait another minute and turn on the Xbox and... test it connects...

  IP address: part 192.168.X. [last intellectual property in your device] for example if static ip given to the unit's 192.168.X.10 get the last part and put it in the empty box...

  For the without wire that -.

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER...
  Let the empty user name & password use admin lowercase...
  For wireless settings, follow these steps: -.
  Click on the Wireless tab
  -Wireless network mode must be mixed...
  -Provide a unique name in the name box of the wireless network (SSID) in order to differentiate your network from your network of neighbors...

  -Set the channel 11-2 wireless, 462 GHz... Wireless SSID broadcast should be enabled and then click on save settings...
  Please take note of the name of the wireless network (SSID) because it's the network identifier...
  For wireless security: -.
  Click the sub-tab under wireless > Wireless Security...
  Change the mode of WEP wireless security, encryption must be 64-bit. Let the empty password, do not type in anything...
  Under type of WEP Key 1 in all 10 numbers please (numbers only and no mailbox for example: your 10-digit phone number) and click on save settings...
  Please note the 1 WEP key as it comes to the security key for the wireless network...

  Click the settings advanced wireless
  Change the interval of tag to 75 > change the Fragmentation threshold to 2304, change the RTS threshold to 2304 > click 'save settings '...
  Now let's see if you can locate your wireless network and try to connect...

• Laptop with Windows Vista wireless and wired computer with XP SP3 and office router cannot share folders

  1. I can ping computers by IP address and name, but I can't access the shared folders on the desktop to the laptop.
  2 working group is set up on both machines with the same name.
  3 McAfee and win firewall is turned off both for troubleshooting purposes.
  4. from office network places, it shows files from the laptop.  The laptop computer, the desktop computer is not seen.
  5 hot fix for XP machine, Layer Topology Discovery LLTD (Link) (KB922120) answering machine will not load on the desktop with XP SP3.

  Hello swindco,

  Have you tried to change the wireless channel that your router is running at? There may be interference that could prevent the network connection:

  Take a look at step 6 in this article that give more details about it:

  http://www.Microsoft.com/athome/Setup/wirelesstips.aspx

  If you need assistance to change the settings of the specific router, you will need to contact your router manufacturer or your internet service provider.

• Router WRT54G wireless does not work with the new modem

  Hi, I use my router WRT54G (Firmware version v2.02.7) on 4 computers for more than four years now, without any problems at all. However, today I had to replace my old modem with a brand new modem Speedtouch from my supplier, and although I made sure each cable has been connected properly, it just doesn't.

  The connection between my PC and the router (http://192.168.1.1) is good, but the problem must be between the router and the new modem. When I click on 'Status', he said: ""connection status: disconnected".

  After clicking on the 'Connect' button, it tells me that it "can not connect to the PPTP serverbe"

  Help, please

  Hi Matt,

  Although the resolution of this problem was a little simpler, I still thank you for your answer.

  The neighbor boy came up with the following response:

  «It just check the Type of Internet connection, cause you got an old type of modem before.» It will probably be set to PPTP. If this is the case, simply change it to "Automatic DHCP Configuration", click on "Save Settings" and everything should be ok then"

  And he was right!

  I am so happy

  BR,

  Niqui

• Change Wireless Router WRT54GS to a new PC

  I just bought a new PC and would like to transfer the router to the new. What is the best way to do it? I have to reset the router, I have tried to install the router on the new PC (with CD) and received an error that it is reading my old one (the same).

  Thank you

  JC

  You don't have to change anything on the router. You don't need the CD of configuration that came with the router.

  Wire your PC for the WRT and that's it.

  If you want to connect wireless and then find your network and you connect. Enter your password and everything is ready.

• I installed a new router (Netgear N300) wireless and my laptop is the only computer that does not connect to the internet.

  Connected to the new router, but locally only.

  Currently, I installed a new router (Netgear N300) wireless and my laptop is the only computer that does not connect to the internet. The small icon to the left of my screen says only: ACCESS: LOCAL ONLY.
  BASICALLY,.

  I have Windows Vista Home Premium, notebook Compaq (Presario CQ60 to be exact)

  I can connect if I use a cable, but its disadvantages.

  I can connect wirelessly with my PC and Ipad. and Internet access.

  I TRIED:
  Various patches microsoft such as resetting TCP, safe mode with network, reset the router. »

  Thank you in advance and we hope you can answer this soon!

  I use an Atheros AR5007 802. 11 b / g WiFi Adapter(Compaq laptop) for the moment so this is useful. Thanks again!
  Someone suggested that I update my wireless driver. I am open to this idea, if anyone can find a safe and legal site with the download.

  Hi Bryyaan11,

  You can check out the link to HP support and try to download the drivers for your wireless card updated:

  Support HP & drivers

  For more information, you can also consult the following article:

  Updated a hardware driver that is not working properly

  You can also check the following items and try the steps:

  Windows wireless and wired network connection problems

  Solve problems, find wireless networks

  Hope this information is useful.