Disabling USB HID of selective suspension

Similar Questions

• Convenience store detected USB selective suspension js disabled.

  Convenience store detected USB selective suspension js disabled. My question is would you please show me how to enable it? Thank you in advance.

  Original title: USB

  For your system of brand not specified and the model, it would be in your control panel, Power Options:

  

  After that manufacturing and application settings reboot your system and check the settings again to make sure they "stick".

  More information (probably many more):

  https://msdn.Microsoft.com/en-us/library/Windows/hardware/ff540144%28V=vs.85%29.aspx?f=255&MSPPError=-2147217396

  The USB selective suspend feature allows the pilot to hub to suspend an individual port without affecting the operation of the other ports on the hub. Selective suspension of USB devices is particularly useful in portable computers, because it allows to save the batteries. Many devices, such as fingerprint readers and other biometric scanners, requires only power intermittently. Suspension of such devices, when the appliance is not in use, reduced power consumption total. More important, any device that is not suspended in a selective way can prevent the host controller USB for deactivation of his list of transfer, residing in system memory. The DMA transfers by the Scheduler host controller may prevent processors on the system to enter deeper sleep States, such as the C3. Selective windows suspend behavior is different for devices running Windows XP and Windows Vista and later versions of Windows.

• How to use Group Policy to disable USB Internet dongles

  Dear MS,

  This is to request a solution about the use of group policy to disable USB Internet dongles and allow other USB devices like mice and keyboards in server 2008 R2. I tried several options but still, I'm having the problem. Kindly give me a solution as soon as possible.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Existing communication usb - hid in labview c code using

  Hello

  I want to write a simple temperature using labview recorder and an external hardware that communicates via usb - hid. The external hardware uses an ATMEL 90USB162 µC and probes DS18B20.

  Link to the material:

  http://www.diamex.de/dxshop/USB-temperatur-sensor-Tester-fuer-DS18B20

  The source of a simple command line tool is available (see attachment), which reads the value of the temperature of the connected sensors.

  Is it possible to include this c code in the labview application to simplify the communication?

  Thank you very much and best regards,

  Michael

  Hello

  I stopped using the existing code and replace by http://ahidlib.com/index.php/ahid-dll-and-labview. This works very well for me.

  Best regards

  Michael

• Disable USB mass storage, but activate usb internet dongle

  Dear all,

  I want to disable on my system usb mass storage, but it allows to disable usb internet dongle also. I want to disable the flash devices only. Please help me

  If you use Windows 7 Ultimate (or company), you can apply GPOS to disable USB mass storage.

  Take a look at the following link (the PowerShell script works in other editions of Windows 7 as well, but please make sure you know to change, before moving in the case you'e don't use is not Windows 7 Ultimate/Enterprise):

  https://social.technet.microsoft.com/Forums/windowsserver/en-US/5e10c51a-5d58-4648-8779-aec402efd567/disable-usb-mass-storage-through-gp-across-windows-7-xp-but-usb-keyboard-mouse-should?forum=winserverGP

• How to disable/enable inputtextfileld on select of another radiobutton using adf12.1.3

  Hello

  How to disable/enable inputtextfileld on select of another radiobutton using adf12.1.3

  Can anyone provide a few points on that.

  I did it like below on my listner valuechange radiobutoon method but does not work

  {} public void onRadiobuttonVCE (ValueChangeEvent valueChangeEvent)

  Add the code in the event here...

  log.info ("GCONF1001Bean onRadiobuttonVCE() started:::"+valueChangeEvent.getNewValue()); ")

  concentratorMode = valueChangeEvent.getNewValue (m:System.NET.SocketAddress.ToString ());

  concentratorMode is the value of the selected radiobutton

  RichInputText r = findComponentInRoot ("it2") (RichInputText);

  log.info ("value of r GCONF1001Bean onRadiobuttonVCE:" + r);

  {if (concentratorMode.Equals("1"))}

  log.info ("GCONF1001Bean onRadiobuttonVCE() inside the 1st if :::"); ")

  r.setDisabled (false);

  log.info ("GCONF1001Bean onRadiobuttonVCE() after 1st if :::"); ")

  }

  {if (concentratorMode.Equals("2"))}

  log.info ("GCONF1001Bean onRadiobuttonVCE() inside the 2nd if :::"); ")

  r.setDisabled (true);

  log.info ("' GCONF1001Bean onRadiobuttonVCE (after if 2nd): '");

  }

  {if (concentratorMode.Equals("3"))}

  log.info ("GCONF1001Bean onRadiobuttonVCE() inside the 3rd if :::"); ")

  r.setDisabled (true);

  log.info ("GCONF1001Bean onRadiobuttonVCE() after the 3rd if :::"); ")

  }

  }

  --

  JS

  You can set a variable bean said "textBeanDisabled" and set the value of this 'Y' or 'n', based on your health status.

  Then set the disabled property

  Just copy - paste your logic to the above post:

  String textBeanDisabled = "N";

  {} public void onRadiobuttonVCE (ValueChangeEvent valueChangeEvent)

  Add the code in the event here...

  log.info ("GCONF1001Bean onRadiobuttonVCE() started:::"+valueChangeEvent.getNewValue()); ")

  concentratorMode = valueChangeEvent.getNewValue (m:System.NET.SocketAddress.ToString ());

  concentratorMode is the value of the selected radiobutton

  RichInputText r = findComponentInRoot ("it2") (RichInputText);

  log.info ("value of r GCONF1001Bean onRadiobuttonVCE:" + r);

  {if (concentratorMode.Equals("1"))}

  log.info ("GCONF1001Bean onRadiobuttonVCE() inside the 1st if :::"); ")

  r.setDisabled (false);

  textBeanDisabled = "N";

  log.info ("GCONF1001Bean onRadiobuttonVCE() after 1st if :::"); ")

  }

  {if (concentratorMode.Equals("2"))}

  log.info ("GCONF1001Bean onRadiobuttonVCE() inside the 2nd if :::"); ")

  r.setDisabled (true);

  textBeanDisabled = 'Y ';

  log.info ("' GCONF1001Bean onRadiobuttonVCE (after if 2nd): '");

  }

  {if (concentratorMode.Equals("3"))}

  log.info ("GCONF1001Bean onRadiobuttonVCE() inside the 3rd if :::"); ")

  r.setDisabled (true);

  textBeanDisabled = 'Y ';

  log.info ("GCONF1001Bean onRadiobuttonVCE() after the 3rd if :::"); ")

  }

  }

  See you soon

  AJ

• hide the selection rectangle...

  Hello!

  I think remember me a small script that hides the selection rectangle (dotted bit) of a SWF embedded in a Web page?

  Can you please specify?

  Thank you.

  I don't remember exact CSS code, th, but if you Google "swf dotted" you'll prbably will find various results.  I believe that the answer involves specifying the outline: none;  for the body or something to that effect.

• How can I permanently disable USB selective suspend?

  My laptop no sleep with mouse wireless dongle plugged into usb port, unless I go in the advanced power options and turn off the USB selective suspend. The problem is that the USB selective suspend him reactivates itself on a daily basis, cause unknown. It happens even when I reload. I need to disable permanently the USB selective suspend, or better yet, to understand why my advanced power options settings keep returning if not their own and find a way to avoid that from happening.

  Laptop is an ACER aspire 4810 t

  The event log shows wake source unknown.

  I set it so that powercfg - devicequery wake_armed returns no result except the keyboard. That's how I want. I only want the keyboard to wake my computer. I don't want to wake up by himself for some reason any.
  

  Open Notepad, paste the following text

  Windows Registry Editor Version 5.00

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\USB]
  "DisableSelectiveSuspend" = DWORD: 00000001

  Save it as USBdisablepower.reg

  Double click on it and merge, return to as the previous post Device Manager and power options should be driven because that selective suspend is disabled.

• How can I disable USB Plug-and-Play?

  Whenever I plug a camera into my USB port, Windows 7 treats as it has never been plugged in before.   When I plug my iPhone or iPad to synchronize with iTunes, Windows 7 starts trying to reinstall the drivers for it even though I just unplugged it five minutes ago.  When I plug my mouse, I get the same thing.  I use a laptop for the convenience of being able to unplug everything, put it in a bag and take it with me.  It is ridiculously annoying having to wait five minutes or more to start using my mouse whenever I put in place somewhere else.  Have to restart iTunes every time I plug in my phone, because Windows decided not to recognize the device even when I had just plugged in a minute there is delayed.  It is a stupid feature, and anyone he designed by default to this mode should be fired for being a fool.

  (1) you cannot disable

  (2) but you can disable the USB plug and connect service

  (3) START - RUN - type SERVICES. Enter MSC

  (4) in the right pane, find PLUG-AND-PLAY, then right-click, choose Properties

  and then MAKE some disabled

  (5) reboot your system

  (6) before the opening of the session, go to the BIOS settings, select USB controllers all THE

  (7) download and install latest correct chipset driver for your model of motherboard

  website of motherboard

  Good luck

• Disabling USB using the registry key does not work

  I have disabled the use of the USB storage by changing the registry under USBSTOR key and making the value between 3 and 4.

  Once I did 4, after the reboot, the same setting works and USB is disabled

  But after 4 or 5 days, when I try to insert the USB flash drive, the value changes automatically from 4 to 3, and the PC detects the USB storage device.

  This also occurs in Windows XP and Windows 7.

  Kindly help.

  Jocelyne

  Hello, Jocelyne,.

  Start > type CMD

  Right click on CMD and select run as administrator

  Type the following command: regsvr32/u usbstor.sys

  Press enter

  This disables the driver without deleting.

  How can I prevent users to connect to a USB storage device?

  http://support.Microsoft.com/kb/823732

• Closing lid on my CQ61 disables USB ports...

  I try to use my Compaq CQ61Z as a HTPC.  I connected via HDMI to my stereo receiver and use a keyboard and mouse with Receiver USB wireless to fight against it from across the room.

  Everything works fine, except when I close the lid.  I found the power setting to do not have the laptop to standby automatically when the lid is closed, but the keyboard and mouse stop working when the lid is closed.  This pretty much kills the idea to use this laptop as a HTPC.

  As soon as I open the cover, the KB & mouse start working again.  I can't find anything in the power settings that would have an impact on the USB ports.

  Any suggestions?

  If you go into the advanced power options there is a setting for USB devices, you can change to disable selective suspend

• IPhone on the pricing policy disabled USB ports in Windows

  Hello

  For safety, we stopped ports USB one our business using Group policies in a Windows environment. USB keys, USB, camera hard drives, phones, all are not allowed to install and use when connected to a computer. Capablities charge are still working on the iPhone, Android devices, but are not charged if the driver is or cannot be installed. Can someone tell me why this is and, perhaps more importantly, if there is a way to make iPhones load and always disable their data connectivity capabilities. Internet research and these forums have not made clear things for me on this subject.

  Kind regards

  Michiel

  I don't know if it will work, but there are some not Apple cables that are pricing only, not charging and synchronization. It can be difficult to find one who has certified the IFM and these types of cables are generally good cheap and of poor quality, so this may damage your phone if you're not careful which one you buy.

• NB200 Disabling USB Sleep & Charge

  I have a Toshiba NB200 last month and I noticed that the battery itself reject about 70 percent in two days, if it is not used. I found this forum by searching on this problem and found the following thread.

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=44677&TSTART=30

  I followed the instructions on it and disabled the USB Sleep and Charge. However despite the neutralization of him and save the settings when I turn it back on to there turned to Mode 1. Is there something else I need to change so that it stays disabled?

  Thank you very much!

  What is the version of the BIOS on your NB200?

  I v1.20 and battery down only about 2% of the overnight. Update the BIOS, if not v1.20

  In the BIOS, make sure they are disabled:

  USB Sleep and charge
  Wake on keyboard
  Wake on LAN

• Question USB HID

  Hi again.
  I work with USB interfaces, in a project of counters of hearing.
  I worked successfully during the USB transfer in BULK, but the engineers of software here want it works on the sup HID Protocol, in order to simplify the process of adaptation.
  I read on the forum, but I couldn't find how to set up this type of transfer of the library, as I do with in bulk.

  I just need to receive two packs of 8 bits each and send 8 bit also.

  someone knows how to do?
  or with experience in something similar by visa? ¿ ?

  Thank you very much!!

  I said that I was actually doing it in bulk.

  Anyway, I found my Pentecost HID in a way throw the interruption VISA waiting, and it works very well, or at least IN mode (CPU host). But IM not been able to do in mode. I don't know why, but it just doesn't work.

  This is my vi, in particular, it receive and store data in a * file txt according to certain parameters.

  Doubts about this, don't forget to tell me.

  Good bye

• DISABLED USB ports

  I have a gateway HARD drive 320, memmory 4 G laptop i3, I lost connection in all 4 of my USB ports.  I tried to uninstall them and reboot, I tried disabling and then enabling USB ports and nothing works.  Help, please!

  Hello

  Check with Support technique Gateway, their documentation and online drivers.

  Check the configuration/settings (BIOS/CMOS) often F2 when you start - make sure that USB is enabled.

  For a laptop, using a real computer store (not the leeks and the glances at a Best Buy or other stores)
  or the manufacturer of the support system.

  ------------------

  References to Vista also apply to Windows 7. (Vista is similar - to use XP RUN instead of start - search)

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control the click Control Panel - Device Manager - no matter where in the box of white/white - then the VIEW - see the
  Devices disabled - look around (with the exception of USB controllers) for your devices (can have
  zero or more than one) and top - right click UNINSTALL.

  Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
  UNINSTALL all but the category itself - REBOOT - it refreshes the driver and battery USB

  This KB shows XP how to and methods of Vista and Windows 7 are the same
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer.
  as well as all USB devices that you previously used. Run Options and tick three 1
  are there choices to see if any.

  http://www.NirSoft.NET/utils/usb_devices_view.html

  You must remove all instances of the devices and restart.

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.