Disaster recovery for VMware View

Similar Questions

• Card reader chip as a pass through for VMware View 5.1 device (NOT USED for AUTHENTICATION)

  I try to get a USB Smart Card Reader * to work on related under VMware View 5.1 clones

  * not as an authentication device, just like a transmission of smart card reader

  Not tried:

  1 activated pass through card reader in the registry for the VMware view client

  2. active "allow redirection of card reader" in the policy active directory

  3. customer connected to view, selected USB drive list, connected to the customer

  After that, the card reader will appear with a "generic smart card", but it does not actually work.

  We executed the diagnosis of the smart card and he pointed out that the drivers are ok and windows service is ok, but the map can not be found.

  PS: When we tried first, about 2 weeks ago it worked, but it has suddenly stopped working. (Needless to say that the virtual machines and the Clients were restarted several times).

  Check that you have not installed the "PCoIP smart card Redirection" option during the installation of the agent. If it is present, it will redirect calls made RDP client smart card. Because you use a 'local' to the desktop USB drive, you don't want to do.

• Two monitors configured using PCoIP does not cover both monitors for VMware View

  Occasionally, I've experienced the symptoms described in KB1027899, when usually the first time of connection for the day that I select multiscreen and the screen is divided in the Middle the 2 monitors using PCoIP. I end up disconnecting and reconnecting to the virtual machine a few times, which is a valid solution, but I'm still curious about why this is happening.

  I am running VMware View 5.0.0 build-481677, on a Wyse R90L with Windows XP Embedded, I use VMware View Client 5.0.0 build 481677 and VMWare View agent on a box of Windows 7 5.0.0 build 481677. We lack vCenter and ESXi 5.0.0 in all areas as well.

  According to the article, this happens because there is not enough video memory configured for the virtual computer. The problem I have is that if I force the pool offices use PCoIP and 128 MB of video memory, I can't RDP to the workstation as the Protocol is locked, I need to still be able to do. I tried manually increase the memory video, but view reconfigures to match the settings of the pool.

  Is there a way to increase the video memory without changing the required logon Protocol? Or is there a fix in a different way to this question?

  Thanks a lot guys.

  Joe

  Have you tried to change the configuration video pool to be 2 monitors with 2560 x # instead of the default resolution to see if that solves the problem?

  Datto

• Ports and Destination for VMware View Client

  Hi all

  I'm looking for a quick bit of help if possible please...

  Environment: VMware View 4.5

  Question / Info needed:

  Two companies having a bond of trust between data transfer etc. and resources share. We need access to a site through their firewall in the bond of trust to connect to the VMware View VDI Office.  Customers using VMware View Client.

  The question is, if we get the site to enable port 443 to our broker connection I assume this will not be enough?  It must be possible to:

  443 to connection broker

  32111 (redirect USB) to?

  9427 (multimedia redirection) to?

  4172 (PCoIP) to?

  3389 (RDP if used) to?

  This may all sound a bit novicy but I need to be 100% before you go test.

  Thanks in advance.

  So using the brokers of the connection in direct mode without any security server.   I think that it would look like this.

  443 to connection broker

  32111 VDI Desktop

  9427 multimedia redirection) to?

  4172 VDI Desktop

  3389 VDI Desktop

• Microsoft System Center Operations Manager Pack for vmware view?

  According to the link below, there is a vmware view management pack available for MS operations manager:

  http://blogs.VMware.com/view-point/2010/08/view-45-modernizing-the-Windows-desktop.html

  Where can I download this? I was not able to find it in the download portal.

  This package is actually available on the login server view itself once you have it installed.

  Information on integration with SCOM is found beginning on page 51 of the Guide found here VMware View integration:

  http://www.VMware.com/PDF/view45_integration_guide.PDF

  -Mike

• Test environment for VMware View 7 - PCoIP Protocol does not work properly

  We test VMware View 7 with as many Thin Clients and customers zero (Teradici)

  When we try to connect via RDP Protocol, it works fine. When we try to connect via the PCoIP Protocol, desktop display seems to blink (about 2 times per second) and display resolution is not acceptable. So, there is a problem with the Protocol (broker or Office VM)

  There are no firewall in the middle.

  Desktop virtual has a clean install.

  So... anyone have the same number? or similar?

  How much video Ram?

  You can increase the video Ram.

• Automatic connection to the server at startup for VMware View Client 2.2 Horizon?

  In iterations (5.x), there was simply an option in "always connect to this server on startup". 

  
  

  In test 2.2.0 I don't see that option anywhere. I have also yet to find any switch that I can add to enable this feature.  Does anyone know if this is even possible?

  
  

  Thank you

  You can create a custom shortcut that bypasses the user selects server connection: "C:\Program Files (x 86) \VMware\VMware Horizon view Client\vmware - view.exe ' desktopProtocol - desktopLayout - fullscreen PCOIP - serverURL 'view.connection.server.url' logInAsCurrentUser - false

• QUESTION: Disaster recovery for Test db with RMAN

  Hi friends,
  
  I'm working on ORACLE10g on RedHAt AS4.
  I'm doing on my test database using the catalog of recovery after a disaster, and I deleted all the contrl / redo n /datafile of the system parameter file, when I try to conneciting to Rman I got under question.
  
  
  [rman@linux1 bin] $. / target rman.
  Recovery Manager: Release 10.2.0.1.0 - Production on Mon 28 Feb 11:58:11 2011
  Copyright (c) 1982, 2005, Oracle. All rights reserved.
  connected to target database: RMAN (DBID = 1629436196)
  RMAN >
  RMAN > set dbid = 154326135
  executing command: SET DBID
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure of order CSET at 28/02/2011 11:59:13
  RMAN-06188: cannot use command when it is connected to a mounted target database
  RMAN >
  
  
  My problem is... I m unable to set the DBID of my prod db, RMAN (catalog) connects to itself as the target of DB,.
  
  Any guys help?

  Looks like you have connected only to the catalog database.

  do not forget to target = database to restore

  so you should

  (1) set ORACLE_SID = db restore
  (2) rman
  target connection.
  Connect catalog...

• What NAT ports in the firewall for VMware View Server Security?

  We have a Cisco ASA and I wonder what are the ports I need NAT from the outside to the Security Server?  I'm assuming that port 443, but don't know if this is correct or if maybe other ports must be open.

  Thank you!

  Brian

  This KB should help you, http://kb.vmware.com/kb/1027217.

• Overview of VMware VIew Client for Linux

  Hey everybody

  Is there a table of software compatibility for VMware View Client and Linux Horizon? We would like to use the client on devices based on linux, but we do not know what linux operating systems are currently supported.

  Dou you have a formal link or are you aware of the compatibility?

  Best regards

  Documentation (https://www.vmware.com/pdf/horizon-view/horizon-client-linux-document.pdf):

  Operating systems: Horizon customer 3.2 supports the following operating systems.

  Operating system	Version
  Ubuntu Linux	12.04 or 14.04
  Red Hat Enterprise Linux (RHEL)	6.5
  SUSE Linux Enterprise Desktop (SLED)	11 SP3
  CentOS	6.5

  IMPORTANT only 32-bit systems are supported.

  * Horizon customer 3.1: 32-bit Ubuntu Linux 12.04 or 14.04

  * Display Client 2.x: Linux 32 bit Ubuntu 12.04

  * View Client 1.6 and 1.7: 32-bit Ubuntu Linux 10.04 or 12.04

  * Display Client 1.5: 32-bit Ubuntu Linux 10.04 or 10.10

  VMware customer Horizon for Linux Release Notes

• Several areas in the Horizon of VMware View AD

  Hi guys, I want to test creating Pools with 2 Active Directory domains. I have set up my environment as follows:

  
  

  Domain A

  
  

  1. connecting to the server

  Server 2-composer

  3-Security Server

  4 - vCenter Server

  
  

  Domain B

  1. connecting to the server

  2. created a separate account to View Composer

  For now seen Horizon 5.3.2 is fully functional on the field. But I need your help deployment pool using domain B. After you have configured the connection Server (joined to Domain B), I tried to add domain B by using view composer account by logging in to view Admin(Domain A) > Edit vCenter Server > change display composer settings > check server information (under Domain) but I'm 'Bad domain name.

  
  

  You guys please help or send me a link of approval one way of installation which is required for VMware View, so that I can deploy Pool using domain B.

  
  

  Without creating confidence, I added redirector conditional field B on the field which allow me to add domain B without "Bad domain name" pop up. But I don't know what to do next. Anyone can guide me please.

  
  

  Concerning

  Hello

  I've done below the configuration to create 2 different pools where VM is joined to 2 different domains.

  I have Domain A and domain B, having 2 confidence way configured by the AD team.

  I sent 3 win 2 k 8 Server and added to the field.-a. On a single server, I installed vCenter & composer on one server I installed the login server & the other I did the Server fall back to the existing connection server.

  In connect to server, I added vCenter & composer. I have 2 different users who have domain join rights in Domain A and domain B.

  Domain-A\abcUser

  Domain-B\xyzUser

  I added above 2 users in the view composer under domain settings. PFA.

  When creating a pool, in the comments tab customization for users of domain-A, I chose identifier of domain-A\abcUser machine Domain-A and the AD container, which is present in Domina-A place machines.

  for domain B user created another pool, and tab customization of comments, I chose domain-B\xyzuser and the AD container that belongs to the domain B to place machines.

  If you want to add a different machines, you must not deploy a connection/replica server in each domain. Just add the ID domain user under domain composer view tab and choose the right ID when creating the pool.

• DST and vmware view = weird questions

  This is the 3rd time that when the time comes or goes we get questions of kind of weird in our very frequent floating pools, VMs stuck in starting up, wait for connection etc.

  If you look at the log below you will see that the virtual machine has been one hour before, and then she came back at the right time.

  Anyone else seen elsewhere?

  2014 03-18 T 16: 06:36.553 - 04:00 INFO (016 C-0390) < Service main Thread > [wsnm_desktop] DesktopManager queue server is installed

  2014 03-18 T 16: 06:36.585 - 04:00 INFO 016c - 082 C < logloaded > [MessageFrameWork] "ws_filesystem - component of VMware View filesystem plugin" Plugin loaded, version = 5.2.0 build-987719, buildtype = output

  2014 03-18 T 16: 06:36.595 - 04:00 INFO (016 C-0830) < logloaded > [MessageFrameWork] Plugin 'wsnm_jmsbridge - VMware View framework JMS Bridge Controller' loaded, version = 5.2.0 build-987719, buildtype = output

  2014 03-18 T 16: 06:36.612 - 04:00 INFO (016 C-0838) < logloaded > [MessageFrameWork] 'ws_klog - plugin VMware View Kernel Log' Plugin loaded, version = 5.2.0 build-987719, buildtype = output

  2014 03-18 T 16: 06:36.642 - 04:00 INFO (016c-0390) < Service main Thread > [wsnm] System Service VMware View begins

  2014 03-18 T 16: 06:36.642 - 04:00 INFO (016c-0840) < logloaded > [MessageFrameWork] "ws_perfmon - VMware View Performance Monitor and counter shop" Plugin loaded, version = 5.2.0 build-987719, buildtype = output

  2014 03-18 T 16: 06:36.643 - 04:00 INFO (016 C-0850) < logloaded > [MessageFrameWork] Plugin ' ws_vhub - Service USB virtual VMware View framework "support, version = 5.2.0 build-987719, buildtype = output

  2014 03-18 T 16: 06:36.643 - 04:00 INFO (016 C-0848) < logloaded > [MessageFrameWork] Plugin "ws_thinappmgmt - support for VMware View infrastructure Application Management" loaded, version = 5.2.0 build-987719, buildtype = output

  2014 03-18 T 16: 06:36.644 - 04:00 INFO (016 C-0854) < PluginInitThread > [ws_vhub] vhublib: initialized, VMware View virtual USB Hub API (64-bit) version: 5.5.0 build-966253, exit: unknown

  2014 03-18 T 16: 06:36.782 - 04:00 INFO (C 088-0890) < 2192 > program [MessageFrameWork] 'wsnm_jms - VMware View framework JMS bridge' began, version = 5.2.0 build-987719, pid = 0x88C, buildtype = release, usethread = 1, closeafterwrite = 0

  2014 03-18 T 16: 06:36.806 - 04:00 INFO (C 088-0890) < main Thread > [] classpath option:-Djava.class.path=C:\Program VMware View\Agent\lib\; C:\Program View\Agent\lib\\agentjms.jar VMware; C:\Program View\Agent\lib\\commonutils.jar VMware; C:\Program View\Agent\lib\\events-client.jar VMware; C:\Program View\Agent\lib\\events-common.jar VMware; C:\Program View\Agent\lib\\gnu-crypto-2.0.1-1.jar VMware; C:\Program View\Agent\lib\\jdom-1.0.jar VMware; C:\Program View\Agent\lib\\jms-9.2.1.jar VMware; C:\Program View\Agent\lib\\jmswrapper.jar VMware; C:\Program View\Agent\lib\\log4j-1.2.14.jar VMware; C:\Program View\Agent\lib\\messagesecurity.jar VMware; C:\Program View\Agent\lib\\orchestratorj.jar VMware; C:\Program View\Agent\lib\\securitymanager.jar VMware; C:\Program View\Agent\lib\\sessionclientapi.jar VMware; C:\Program View\Agent\lib\\swiftmq-9.2.1.jar VMware; C:\Program View\Agent\lib\\v4v-msgserver.jar VMware; C:\Program View\Agent\lib\\winauth.jar VMware; C:\Program View\Agent\lib\\ws_appender.jar VMware; C:\Program View\Agent\lib\\ws_properties.jar VMware; C:\Program View\Agent\lib\\xercesImpl-2.9.1.jar VMware;

  2014 03-18 T 16: 06:36.818 - 04:00 INFO (088 C-08E4) < logloaded > [MessageFrameWork] "ws_javaview - VMware View Java Diagnostics Framework" Plugin, version = 5.2.0 build-987719, buildtype = output

  2014 03-18 T 16: 06:37.001 - 04:00 INFO (C 088-0938) < logloaded > [MessageFrameWork] Plugin "ws_java_bridgeDLL - VMware View Java Bridge Framework" loaded, version = 5.2.0 build-987719, buildtype = output

  2014 03-18 T 16: 06:37.002 - 04:00 INFO (C 088-0934) < logloaded > [MessageFrameWork] Plugin ' ws_java_native - Framework Java native Support of VMware View "load, version = 5.2.0 build-987719, buildtype = output

  2014 03-18 T 16: 06:37.208 - 04:00 INFO (C 088-0890) < main Thread > [ws_java_bridgeDLL] JavaBridge installed service EventLoggerService

  2014 03-18 T 16: 06:37.208 - 04:00 INFO (C 088-0890) < main Thread > [] JavaBridge queue server is installed

  2014 03-18 T 16: 06:37.209 - 04:00 INFO (C 088-0890) < main Thread > [] View Composer agent has completed the customization

  2014 03-18 T 16: 06:37.737 - 04:00 INFO (0624-0628) < 1576 > [VMwareView-RdeServer] program "VMwareView-RdeServer - VMware View RDE 32-bit Server" began, version = e.x.p build-1190491, pid = 0 x 624, buildtype = release, usethread = 0, closeafterwrite = 0

  2014 03-18 T 16: 06:39.567 - 04:00 INFO (C 088-0890) < main Thread > [] View Composer personalization state 0 (0 seconds)

  2014 03-18 T 16: 06:39.673 - 04:00 INFO (C 088-0890) < main Thread > [java] bridge exe started ok.

  2014 03-18 T 15: 38:45.288 - 04:00 INFO (016 C-0128) < main Thread > [wsnm_desktop] Session created in WAIT state: id = 1, winStation = Console

  2014 03-18 T 15: 38:45.350 - 04:00 INFO (0488-0978) < 2424 > [MessageFrameWork] 'wssm - VMware View framework Session Manager' program began, version = 5.2.0 build-987719, pid = 0 x 488, buildtype = release, usethread = 1, closeafterwrite = 0

  2014 03-18 T 15: 38:45.397 - 04:00 INFO (0488-0550) < logloaded > [MessageFrameWork] Plugin 'wssm_desktop - VMware View framework Office Manager Instance' loaded, version = 5.2.0 build-987719, buildtype = output

  2014 03-18 T 15: 38:45.397 - 04:00 (0488-07 D 0) INFO for < logloaded > [MessageFrameWork] Plugin 'ws_winauth - taken in charge of VMware View infrastructure Windows Authentication", version = 5.2.0 build-987719, buildtype = output

  2014 03-18 T 15: 38:45.475 - 04:00 (0488-05 D 0) INFO for < logloaded > [MessageFrameWork] Plugin 'ws_thinappmgmt - taken in charge of VMware View infrastructure Application Management", version = 5.2.0 build-987719, buildtype = output

  2014 03-18 T 15: 38:45.631 - 04:00 INFO (0488-0978) < main Thread > [wssm] Session Manager has begun for the session 1

  2014 03-18 T 15: 38:45.631 - 04:00 INFO (0488 - 0 to 28) < logloaded > [MessageFrameWork] 'wssm_uimanager - VMware View Host UI Framework' Plugin support, version = 5.2.0 build-987719, buildtype = output

  2014 03-18 T 15: 38:45.631 - 04:00 INFO (0488 - 0 B 40) < logloaded > [MessageFrameWork] Plugin 'wssm_ui - VMware View UI framework' loaded, version = 5.2.0 build-987719, buildtype = output

  I was on the phone with VMware for 5 hours Tuesday last with this same problem.  I ended up solving the problem without their help.  You must initialize your model, let the time updated, shut it down, take a new snapshot and recompose your pool.

  Re: View 5.3 - desktop blocked at startup

• VMware view connection failed with status 502 code

  2014 01-20 T 12: 14:40.545 - 03:00 INFO (1248-128 C) < 4748 > [MessageFrameWork] program "wswc - VMware View Client" started, version = 5.4.0 build-1219906, pid = 0 x 1248, buildtype = release, usethread = 1, closeafterwrite = 0

  2014 01-20 T 12: 14:40.576 - 03:00 (1248-1080) INFO < logloaded > [MessageFrameWork] Plugin "wswc_command - VMware View Manager of server connection commands" load, version = 5.4.0 build-1219906, buildtype = output

  2014 01-20 T 12: 14:40.576 - 03:00 INFO (1248-0F68) < logloaded > [MessageFrameWork] 'wswc_http - VMware View Client HTTP Handler' Plugin loaded, version = 5.4.0 build-1219906, buildtype = output

  2014 01-20 T 12: 14:40.576 - 03:00 INFO (1248 - 16 B 4) < logloaded > [MessageFrameWork] 'wswc_pcoip - VMware View Client PCoIP Interaction Handler' Plugin support, version = 5.4.0 build-1219906, buildtype = output

  2014 01-20 T 12: 14:40.576 - 03:00 INFO (1248 - 16 B 8) < logloaded > [MessageFrameWork] "wswc_rdp - VMware View RDP Manager" Plugin support, version = 5.4.0 build-1219906, buildtype = output

  2014 01-20 T 12: 14:40.592 - 03:00 INFO (1248-16BC) < logloaded > [MessageFrameWork] "wswc_tunnel - Secure Tunnel of VMware View Client" Plugin loaded, version = 5.4.0 build-1219906, buildtype = output

  2014 01-20 T 12: 14:40.592 - 03:00 (1248-1698) INFO < logloaded > [MessageFrameWork] 'wswc_rsa - VMware View Manager RSA' Plugin support, version = 5.4.0 build-1219906, buildtype = output

  2014 01-20 T 12: 14:40.592 - 03:00 INFO (1248-062 C) < logloaded > [MessageFrameWork] Plugin "wswc_ui - Manager of user interface of the VMware View Client", version = 5.4.0 build-1219906, buildtype = output

  2014 01-20 T 12: 14:40.592 - 03:00 INFO (1248-07F8) < logloaded > [MessageFrameWork] 'wssm_uimanager - VMware View Host UI Framework' Plugin loaded, version = 5.4.0 build-1219906, buildtype = output

  2014 01-20 T 12: 14:40.592 - 03:00 INFO (1248 - B 17, 0) < logloaded > [MessageFrameWork] Plugin 'ws_winauth - support for VMware View infrastructure Windows Authentication' support, version = 5.4.0 build-1219906, buildtype = output

  2014 01-20 T 12: 14:40.592 - 03:00 (1248-128 C) INFO < main Thread > [wswc] Option 'ServerURL' set by GPO

  2014 01-20 T 12: 14:40.592 - 03:00 (1248-128 C) INFO < main Thread > [wswc] Option "Domain_name" set by GPO

  2014 01-20 T 12: 14:40.592 - 03:00 (1248-128 C) INFO < main Thread > [wswc] Option "DesktopLayout" set by GPO

  2014 01-20 T 12: 14:40.592 - 03:00 (1248-128 C) INFO < main Thread > [wswc] Windows Client started

  2014 01-20 T 12: 14:42.919 - 03:00 (1248-1024) < MessageFrameWorkDispatch > [wswc_command] year HTTP error error: status code = 502.

  Use the instructions in this KB: KB VMware: VMware View Client configuration to work around the Internet Explorer proxy settings

• VMware VDI vs VMware View Horizon?

  Hi all

  This should be easy for you, the gurus of VMware

  I have a requirement to expand a network of a single
  location central out for a large company and I am looking to use Thin
  Customers in the new corporate reach in a VMware VDI environment offices
  in the center of data centralized where we already have a full blown 5 of Vsphere
  environment for our servers.

  I was originally looking for VMware VDI via VDA (http://download3.vmware.com/demos/vdi/)
  and was sold on the idea that it would be a good choice given the WAN
  traffic to the Thin Client workstations based on RDP/PCoIP and so
  not particularly heavy.

  However since then looked back to VMWare View and this
  seeks to do the same thing that the VDI put in place and seems to have much more
  information about this.

  I first thought that VMware View Horizon set caching of desktop
  locally (as for a profile of the end user on the WAN) has no sound
  too good to the traffic congestion, etc. so I rejected directly at the exit!

  Can someone tell me if the VDI via the VDA solution has been replaced
  VMware View Horizon? And if so point me a definitive guide for VMware View

  Thanks in advance

  David

  Network humble himself in VMware engineer!

  The link in your feed was on VDM 2.0 which was the first iteration of VMware VDI market.    The most recent is VMware view Horizon which can be found here, Horizon of VMware View (formerly VMware View) (VDI) Virtual Desktop Manager | United States of America.     There is a lot of information on this page that you can see and if you have any questions please do not hesitate to post them in this forum.

• PowerCLI does support VMware View?

  Hello

  Can you get it someone please let me know if PowerCLI includes support for VMware view? Or he'll (if I may ask)?

  Hello

  Yes powercli integrates support of VMware view.

  You can find all the help you need here: http://www.vmware.com/files/pdf/vmw-powershell-integration-view5.pdf

  Kind regards

  Julien.