Disconnecting blackBerry smartphones

Storm 2 9520 4 weeks, operating system up-to-date.

Problem is when someone rings me the phone disconnects the call. I get about 30 seconds worth of conversation and then she cut and says "disconnected". Even when I phone the same thing happens.

Does anyone else have this problem?

Network of Vodafone in the United Kingdom, used.

Any ideas?

Made battery pull work, no problems now, touch wood!

Tags: BlackBerry Smartphones

Similar Questions

  • Disconnecting blackBerry smartphones Via USB

    Dear BlackBerry Desktop Software Support

    I just happened on a problem that just started while my phone is connected to this PC you by writing.

    In the last hour, my phone has been cut more than 10 times and I do not see why it does this.

    The connectors are stable, but occasionally the phone disconnected and reconnects.

    I brought this phone to my provider 4 times this year, to have changed connector, but the phones is always sent back with the same connector to corrodant and they will not change unless I can't get a connection of any charger, if connection to the sector or from my laptop

    I had updated the latest BlackBerry Desktop Manager to Version 7.1.0.37 which works fine until today.

    Is there any direction I could get about this problem, please.

    Yours Sincerely

    JTV

    Hello

    It looks like a hardware problem with a faulty connector. I don't know why your carrier didn't want to deal with it before, but contact them again. As long as your phone is still under warranty, they need perform the repair, as long as it is due to no fault of your choice. If your carrier refuses to deal with the problem and the unit is still under warranty, you can try to contact RIM directly using the information provided in the following link:

    http://UK.BlackBerry.com/support/programs/technical/incident.html

    I hope this info helps and that your carrier finally solves the problem for you.

  • BlackBerry smartphone app error 603 and BBDS does not recognize my device

    Here's the situation: the battery ran out on my unit earlier this week. When I started to charge, the unit will start automatically restart. Before restarting, the messages "error app 603' and 'reset' appeared. If I click "reset", the whole process starts again.

    The previous messages in the forum I read about 'error app 603' suggested I should restore the device settings or reinstall the operating system. I tried to connect my device to my laptop via USB cable, however the computer will only recognize the connected device with a chime at the beginning of the discount to zero, followed quickly by a chime of disconnection being rebooted. The computer or software Deskstop BlackBerry recognizes the device while it is stuck on the '603 error message' app.

    What else can I try?

    Hello and welcome to the community!

    Here's a knockout who deals with this error:

    For the charging of the OS, you can better use this method... on a PC (you can't do this on MAC):

    (1) make sure you have a current backup and your BB complete... you can find complete instructions via the link in my sig auto below. Sorry, already a moot point counts with the error.

    2) uninstall all the BB OS packages from your PC,

    (3) make sure you have the BB Desktop Software already installed

    (4) download and install on your computer, the BB OS package you want:

    • http://us.BlackBerry.com/support/downloads/download_sites.jsp
    • If all you want are the levels of BONE, it is first sorted by carrier - the carrier supports, your search will be fast. However, some carriers are much slower than others to release updates. To really get the package up-to-date OS for your BB, you need to dig through and find all businesses that support your specific model BB and then compare the BONE levels they support.

    5) remove all copies of the SELLER on your PC. XML... There will be at least one and maybe 2, and they will be located in the same way or to (it changes based on your version of Windows) these files:

    • C:\Program Files (x 86) \Common Files\Research In Motion\AppLoader
    • C:\Users\(your Windows username) \AppData\Roaming\Research In Motion\BlackBerry\Loader XML

    (6) work around the Desktop software and use the CHARGER. EXE directly, through step 2 in this process:

    If, during the process of step 6, your BB presents "507" error, simply unplug the power cord of the BB USB and reinsert it. do nothing else... This should allow the installation to continue.

    You can also study the use of BBSAK (bbsak.org) to perform the wipe what he is capable.

    You may also use these tips:

    If you are on a MAC, you are limited to only your sanctioned carriers OS packages... but can still use any level they currently have to sanction. See this procedure:

    • KB19915 How to perform a clean reload of the smartphone BlackBerry using BlackBerry Desktop Software application software

    Good luck and let us know!

  • Smart blackBerry Smartphones could BBProtect with deleated BB - ID phone

    Hello

    Is possibe ist to disconnect a device of BBProtect after that the BB ID is already deleated?

    Even reinstalling the operating system has not solved the problem. After the reboot you must fill the deleated BB - ID.

    Many thanks,

    DasJo89

    smallmind wrote:
    If you deleted your BBID, he should have removed the BBProtect device.

    # This is not how it works.

    Overview of anti-theft Protection > http://blck.by/1Ethg83

    If you delete the BBID while BlackBerry Protect is always enabled on the device, you killed the camera and hope to use again.

    Read this for complete information and suggestions to regain access to your BBID > http://supportforums.blackberry.com/t5/BlackBerry-World/How-to-regain-access-to-your-BBID/td-p/25467...

    You can reset your password BBID, BUT read the consequences before that: the ID Article: KB36188 how to reset the BlackBerry ID account used with BlackBerry smartphones and BlackBerry World > http://www.blackberry.com/btsc/KB36188

    Other information of the BlackBerryID and http://www.blackberry.com/btsc/KB35467 resources

    If you purchased your appliance from ShopBlackBerry, Amazon (U.S. / UK) or the Porsche Design Store, please communicate with BlackBerry using the details on our page contact us.

    Contact us blackBerry > http://blck.by/1MxtqPR

    If you bought your device with a wireless service provider, or a retail store in person or online, please contact them for assistance and the State you experience problems with the anti-theft Protection in BlackBerry 10 OS 10.3.2.

    When you contact your point of sale, please have the following prepared;

    DO NOT PUBLISH THIS INFORMATION IN THESE FORUMS

    -Your BlackBerry ID
    -Proof of purchase such as a reception
    -A copy of your wireless bill that shows your phone #.
    -A copy of your ID issued by the Government

    Thank you!

  • BlackBerry Smartphones Blackberry 8520 wiped and does not show error 507

    Hi, I recently wiped my blackberry 8520 OS with BBSAK and started to install another OS, in the process, the USB cable somehow has been disconnected and installation has failed. Now the phone just to start, turn on for about 3 seconds shows nothing and then turns off. It does not show same error 507. Help, please

    Hello and welcome to the community!

    You may need to use these tips:

    Good luck and let us know!

  • BlackBerry smartphones updated software now issues:(aider!!)

    Hi guys. so I've updated my software on my bb curve 8520... Well the bb desktop software had asked me to do the experience works best with my phone. but it turns out to be the opposite. I can not call more I get this message when I try to call someone "can't call the current call" or if I managed to call I can't hang up unless the caller hangs up. my memory card is not working, or more, music and videos say 'impossible to read the content' but I can see all my photos. I can not view my airtime balance or update my bis. I tried to connect my memory card on my pc and it works fine when connected but as soon as I disconnect plays anything from my phone. I rebooted a million times. formatted the entire phone but nothing works! my alarm does not sound and sometimes when someone me the your text does not ring SMS. the update is performed from a 107... something to an update from 1788. I can do to fix all these technical stuff... im convinced this isn't the physical phone that is damaged. your help will be very appreciated. thanx

    Hello and welcome to the community!

    Given what you describe, I think that is better to a clean OS reload. The easiest way is, on a PC (you can not do on MAC):

    (1) make sure that you have a current backup and your BB complete... you can find the instructions at the link in my auto-sig below.

    2) uninstall all the BB OS packages from your PC,

    (3) make sure you have the BB Desktop Software already installed

    (4) download and install on your computer, the BB OS package you want:

    • http://us.BlackBerry.com/support/downloads/download_sites.jsp
    • If all you want are the levels of BONE, it is first sorted by carrier - the carrier supports, your search will be fast. However, some carriers are much slower than others to release updates. To really get the package up-to-date OS for your BB, you need to dig through and find all businesses that support your specific model BB and then compare the BONE levels they support.

    5) remove all copies of the SELLER on your PC. XML... There will be at least one and maybe 2, and they will be located in the same way or to (it changes based on your version of Windows) these files:

    • C:\Program Files (x 86) \Common Files\Research In Motion\AppLoader
    • C:\Users\(your Windows username) \AppData\Roaming\Research In Motion\BlackBerry\Loader XML

    6 (a) to change your level of BB OS installed (at level or lower), you can run the Desktop software and connect your BB... the software should offer the operating system package you have installed on your PC.

    6 (b) or, for recharging your BB OS level installed as well to change, work around the Desktop software and use the CHARGER. EXE directly, through step 2 in this process:

    If, during the process of 6a or 6 b, your BB has an error '507', simply unplug the USB of the BB cord and reinsert it. do nothing else... This should allow the installation to continue.

    You can also study the use of BBSAK (bbsak.org) to perform the wipe what he is capable.

    You can also try the "skeleton OS Reload procedure" in an attempt to circumscribe the precise causal element:

    1. Load your OS "bare bones"... If everything is optional, do not install it.
    2. If the behavior is immediately, then try another OS with step 1
    3. If the behavior does not immediately, then run for as long as necessary to make you to be sure that the behavior will not occur.
    4. Add one more thing - no matter how tempting, one.
    5. If the behavior does not immediately present, and then runs for long enough to be sure he won't have the same problem
    6. Repeat steps 4 and 5 until all things are responsible or the behavior presents

    When the behavior shows up, you know the culprit... the last thing you have loaded.

    If the behavior doesn't re-present, then you know that step 1 or 2 cured it.

    If the behavior has anything, then you have probably a problem of material level for which no amount of OS or software can heal.

    You may also use these tips:

    If you are on a MAC, you are limited to only your sanctioned carriers OS packages... but can still use any level they currently have to sanction. See this procedure:

    • KB19915 How to perform a clean reload of the smartphone BlackBerry using BlackBerry Desktop Software application software

    Good luck and let us know!

  • BlackBerry smartphones can not connect BlackBerry Pearl 9105 for PC

    Hello world

    I have the following problem:

    After using my BB Pearl 9105 for almost 3 years, I can not connect to PC more (I still menu with choice of 3 options on my smartphone when I connect, but when I click on that option "usb" or "charge", the menu appears again).

    In addition, the PC does not recognize my smartphone as a usb device. Updated BlackBerry Desktop Software and the purchase of the new Micro-USB cable did not help.

    I can still load.

    Could anyone suggest me how to solve this problem?

    Hello and welcome to the community!

    Here is a list of troubleshooting items... I hope that something will be useful:

    • http://supportforums.BlackBerry.com/T5/BlackBerry-Desktop-software/tips-for-getting-BlackBerry-deskt...
    • KB10144 How to force detect the BlackBerry smartphone using the Application Loader
    • KB28457 BlackBerry Desktop Software is unable to detect the BlackBerry Smartphone because of administrative permissions
    • KB28458 BlackBerry Desktop Software is unable to detect the BlackBerry smartphone when user account control is enabled
    • KB28459 BlackBerry Desktop Software is unable to detect the BlackBerry smartphone when a full version of Roxio® Media Manager is installed
    • KB28456 BlackBerry Desktop Software is unable to detect the smart phone BlackBerry when the USB selective suspend setting is enabled
    • KB28444 The BlackBerry smartphone is not detected by the BlackBerry Desktop Software, when connected by USB to a USB hub or a docking station
    • KB28443 BlackBerry Desktop Software cannot detect the BlackBerry smartphone when connected via USB
    • KB02640 Troubleshooting USB connections
    • KB15486 Top 10 smartphone BlackBerry and BlackBerry Desktop Manager troubleshooting tips
    • KB00125 BlackBerry Desktop Software cannot detect the BlackBerry smartphone
    • KB11439 BlackBerry Desktop Software does not detect the BlackBerry smartphone when it is connected
    • KB00019 PIN code not displayed in BlackBerry Desktop Redirector
    • KB10938 "Current USB charge is insufficient," appears on the BlackBerry smartphone
    • KB01451 How to enable Sync advanced logging if a wired synchronization fails
    • KB19717 The BlackBerry smartphone is not detected as a USB mass storage device when connected to a computer
    • KB16310 Media Transfer Protocol and the BlackBerry Storm smartphone
    • http://supportforums.BlackBerry.com/T5/BlackBerry-Desktop-Software/Desktop-Manager-quot-disconnected...

    In addition, make sure you use only the root USB ports... without hubs (sometimes the front-end ports are hubs... use a rear USB port). And don't forget to try to disable the USB power management in the configuration of your system (Device Manager).

    Check also on the incompatible software... it was reported that NTI Shadow Ninja & software can cause a conflict; Remove and reinstall the desktop software BB allows to install correctly.

    My apologies in advance if this is redundant - there is no way to be sure that if you have already seen and tried these. Also apologies if all are not currently available... RIM takes their monte and descends at will as they revise things.

    I hope that something it is useful!

    See you soon!

  • BlackBerry smartphones can not make a call, but can receive calls

    Hello! I BBCurve9380 and somehow it just stopped making the calls, but I can still receive. I don't know if it's on the changed settings but on what I read in other forums, it's on the it policy. I checked mine and it says BBFS1 [GTALKAP1] and WLM 2.1 [WLMAP01]. I've updated all my apps and my computer can read my phone just fine. When I try to make a call, it automatically disconnects. Any help would be appreciated.

    In fact, you have a lot more work to do, in light of your acquisition method. Reference:

    • KB05099 Steps to take before selling or after the purchase of a used BlackBerry smartphone

    For step 3 stages of seller, you should replace it and it will remove unit COMPUTER policy:

    • KB31291 How to reset a BlackBerry smartphone to factory using BlackBerry Desktop Software Settings

    However, later, when you restore, DO NOT do a full restore. On the contrary, do only a selective restore of only those databases that you absolutely need (e.g., contacts, calendar, messages) and specifically avoid restore databases that have nothing to do with HIM, political, business or other similar things. If you restore those, you'll just be right back where you are now, as a full restore will conscientiously COMPUTER policy again on your device.

    Note Please that I really have no idea if doing this will restore your ability to make calls... 100% of the information I have comes from what you have posted here. I'm guessing that the policy could be the cause of your problems, but I can't know that. No matter, since there is an IT strategy on board and you are not on BES, then you definitely want to get that deleted. But regarding if that will restore your ability to make calls, I have no way to predict the future... If something is the cause of this specific problem, then we'll have to deal with this - AFTER you remove the it policy so that we can be sure it does not hinder anything else.

    Good luck!

  • Notebook data to retrieve blackBerry Smartphones

    Hi all

    I recently sold my Bold 9700 and then realized that I did not manually copy my Memo Pad data any where before I did a cleanup of the device... I would like to make the backups from the BB Desktop Software. .. can I somehow retrieve these data from memo pad from backups without going through another "BOLD" to restore to?... I have a Curve 8320 old I could throw out there if it will take, and/or I can synchronize with Outlook? (no, it wasn't was not sync would be Outlook in the past, because I normally do not use Outlook)... Some of these memos are really important.

    (And sensitive information too, hope they get truly wiped in the erase process.)

    Thank you... Tracy

    OU can restore the 9700 go back to your old 8320.

    Article ID: KB10339 How to use BlackBerry Desktop Software to restore data from a BlackBerry smartphone from a backup file

    For BlackBerry Desktop Software 6.0 to 7.0

    1. Open the BlackBerry Desktop Software.
    2. Click on device.
    3. Select restore from the list.
    4. Select a backup file.
    5. Choose select settings and peripheral data.
    6. Select the databases to restore, and click on restore.
    7. A warning that all data will be replaced by a backup file. Click on Yes.
    8. When the process is complete, disconnect the smart phone BlackBerry to the computer.

    *****************************

    There are two options for extraction and display of data from backup files.

    1. the RPI Parse macro is designed to read a Blackberry IPD file and create reports in MSWord or MSExcel format. It's free, and you can find more details here: https://sites.google.com/site/ipdparse/home
    2. an other options is MagicBerry MenaStep... that extracts a BBB file or backup IPD files IPD, etc http://menastep.com/pages/magicberry.php split
    3 another IPD and BBB file utility is BlackBerry Backup Extractor and is available for PC and Mac and can be found here: http://www.blackberryconverter.com/ there is a free and paid version.

  • Need for blackBerry Smartphones to synchronize with MS Outlook backup the old files

    Hello

    I'm kinda stuck with my Blackberry Bold 9700.  He wiped my old entries in the calendar (even though I have "Keep forever" selected in options), but I need the calendar last points because I used it for the follow-up of meetings, events, etc.

    Before you reinstall an old backup, copy in Outlook and then re - install my current version is there any how else to get this info on the file backup and in Outlook.  I really want to install a previous version of the backup on my phone because when I do, he never wears on a large number of the phone ringing, settings, etc., and I still need to do to get things to normal.

    Help, please!

    (By the way, I use an older version of the device software on my phone (5.0.0.714) because I can't stand display new calendar version.)

    If you do want to restore a previous backup schedule, you can - calendar only, nothing else.

    Article ID: KB10339 How to use BlackBerry Desktop Software to restore data from a BlackBerry smartphone from a backup file

    For BlackBerry Desktop Software 6.0 to 7.0

    1. Open the BlackBerry Desktop Software.
    2. Click on device.
    3. Select restore from the list.
    4. Select a backup file.
    5. Choose select settings and peripheral data.
    6. Select the databases to restore, and click on restore.
    7. A warning that all data will be replaced by a backup file. Click on Yes.
    8. When the process is complete, disconnect the smart phone BlackBerry to the computer.

  • BlackBerry Smartphones phone old BlackBerry

    I gave my old BlackBerry Torch 9800 phone my daughter but is unable to disconnect from my Blackberry ID Continuo She modify the details of Blackberry ID on the old torch but it also change on my new phone (Torch 9860).

    How disconnect the old phone and my BlackBerry ID to its BlackBerry ID until only my new torch is related to my BlackBerry ID?

    Read this: BlackBerry smartphone must be wiped before transferring the property Security

    Then, the old appliance should be configured with its own staff BlackBerryID

  • BlackBerry Smartphones untrapped Exception error messages

    Hi nGuys,

    I was sent an email with a large attachment with it and now I can't access my emails or send texts?

    Whenever I try, I am presented with this error message: -.

    "Eception exception: java.long.array Indexoutofboundsexception' and an 'OK' button."

    When I click this, (in the vain hope that everything will be OK from here in, it disconnects from the app and I'm at square one!)

    That's why making the phone useless.

    When I contacted Blackberry support, it says that he does not know of "Eception exception: java.long.array Indexoutofboundsexception'?"

    Little help would be greatly appreciated: -.

    Hello and welcome to the community!

    There is virtually no diagnosis of those - they are the equivalent of random errors in Windows for which trace the root cause is futile. Basically, here's the last out in the programming code - some event occurred for which there is no event handler in the code. The patch is an update of the code that handles the event... but, again, what is the event is almost impossible. So, there are a few things to try:

    Sometimes, the code simply is damaged and needs to be updated - just like a reboot:

    • Each time a random strange behavior or slow creeps, the first thing to do is a battery pop reboot. With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes. See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.

    There may be a code updated to the value of the carrier - check out them through this Portal:

    The toughest possible causes are a bad application behave. To find it, there are two options. Is to see if you can read the log file:

    Go to the home screen. Hold down the "alt" key and type "lglg". (You won't see anything as you type). This will bring up the log file. Scroll down (probably a lot of pages) until you see a line that says "eception execption. Click on this line. The application name will be in the info. Alternative methods to implement the newspapers are in this KB:

    • KB05349 How to activate, view, and extract the the event logs on a BlackBerry smartphone

    The other method is to remove the apps one at a time, wait a while between the two (I usually recommend a week), until the problem stops... revealing the offending application. Yet another method is to recharge the BB OS itself, leaving little time between the addition of other applications on the BB in order to be able to determine exactly what is the cause.

    trevorburdett wrote:

    When I contacted Blackberry support, it says that he does not know of "Eception exception: java.long.array Indexoutofboundsexception'?"

    That's an interesting statement... exactly how did you get that? As in, who did you call? RIM offers zero support to front line for BBs... only via the escalation of a carrier can you receive free support from RIM. You go through your carrier?

    Good luck and let us know!

  • BlackBerry smartphones my BB 8900 - present an error "app error 523".

    I tried a lot of steps but return results is the same

    1. I have reset several times (by removing the battery, the key combination)
    2 - I installed BlackBerry Desktop Software for PC and BlackBerry 8900 is identifiedbut me does not do any action.
    3 - I tried to update desktop software, but I have the latest version.
    4 had to upgrade the software on my 8900 online, but after nearly three hours and see no change I am disconnected.

    I still have the same problem, someone has any suggestions?

    Hello

    In this case I recommend to use the application loader to reload the software on your BlackBerry smartphone. First make sure that you download and install the software on your site of carriers here: http://bbry.lv/cp57Eb.

    Loader.exe is located in C:\Program Files Research In Motion\Apploader.

    Make sure that the BlackBerry smartphone is connected directly to the computer, if a laptop computer and plugged in the back if a desktop computer.

    Once you open then the click of application loader.exe. In this screen, you will see the login box. Connect your BlackBerry smartphone at the moment to see if it is recognized by the application. If it is not the battery and try to connect to the battery (it should display PIN USB: UNKNOWN) go ahead and click Next once the loading process starts, replace the battery in the BlackBerry smartphone.

    Thank you

  • BlackBerry smartphones to transfer files from my computer

    I can't see my application my computers when connected by usb. I would like to trasmet files between my computer and my BB. can anyone help please.

    Hi and welcome to the Forums!

    Here is a list of troubleshooting items... I hope that something will be useful:

    http://supportforums.BlackBerry.com/T5/BlackBerry-Desktop-software/tips-for-getting-BlackBerry-deskt...
    KB02640 Troubleshooting USB connections
    KB15486 Top 10 smartphone BlackBerry and BlackBerry Desktop Manager troubleshooting tips
    KB11439 BlackBerry Desktop Software does not detect the BlackBerry smartphone when it is connected
    KB00019 PIN code not displayed in BlackBerry Desktop Redirector
    KB10938 "Current USB charge is insufficient," appears on the BlackBerry smartphone
    KB01451 How to enable Sync advanced logging if a wired synchronization fails
    KB19717 The BlackBerry smartphone is not detected as a USB mass storage device when connected to a computer
    http://supportforums.BlackBerry.com/T5/BlackBerry-Desktop-Software/Desktop-Manager-quot-disconnected...

    In addition, make sure you use only the root USB ports... without hubs (sometimes the front-end ports are hubs... use a rear USB port). And don't forget to try to disable the USB power management in the configuration of your system (Device Manager).

    My apologies in advance if this is redundant - there is no way to be sure that if you have already seen and tried these.

    I hope that something it is useful!

    See you soon!

  • Unable to connect to my Blackberry smartphone to sync my contacts and calendar

    Original title; Unable to connect to my Blackberry smartphone

    Since the last Windows Update August 17, I can no longer connect my computer to my phone smart blackberry to sync my contacts and calendar

    Thanks for your help. I decided to check with my Blackberry service provider, and they were able to fix the problem by simply removing and then reinsert the cell phone battery while it was connected to my computer. The old trick 'the battery '. Never thought of that.

    Thanks again!

Maybe you are looking for