Disconnection of the phase 2

Similar Questions

• My officejet 6500 710 a will not be printed "printer e-mail address." Still stuck in the phase of 'connection '.

  My officejet 6500 710 a will not be printed "printer e-mail address." Still stuck in the phase of 'connection '.

  HP Pavilion D7, Windows 7, all parameters are good, network connected, all permit

  Hi ashkin1975,

  Please disconnect the power from the back of the printer for 30 seconds.  Plug in and turn on.

  From the front of the printer: configuration > network > network by default.  Now, in the same network menu, run the Wireless Setup Wizard.

• iPhone disconnected during the software update

  My iPhone 5 has been connected to iTunes on my PC and I started a software update.  The phone disconnected during the update due to a bad cable.  Now my phone is locked to the screen update showing the apple logo.   I can't turn off it normally to reboot and iTunes does not recognize the phone when I plug it back on my PC.   Any ideas?

  Use the recovery mode as described here.  You may try to go into recovery mode more than once to succeed.

  If you are unable to update or restore your iPhone, iPad or iPod touch - Apple supports

• Wireless router is disconnected from the PC (s) during the use of Firefox 37.0.1

  This problem occurred for the last 2 weeks whenever I use Firefox on each of the 2 PC's I use it every day. The problem may occur a few minutes after the start of Firefox, or it may be hours of continuous use before the connection is lost. It's okay if I'm in Firefox by itself or have the background applications running, but without a doubt requires Firefox runs before I see a problem.

  Configuration: WIN 8.1 and VISTA 64. the two latest updates.
  LAN: cable modem and Belkin wireless router; together with the latest firmware.
  Firefox v37.0.1 without add-ins or modules. Start page is 'empty '.

  Symptoms:
  Status bar Windows shows that I'm disconnected from the router.
  Router and the modem status LED shows that I am connected to the internet. Same thing for the VICTORY of the network status app. It shows no connection to router.

  The problem can be temporarily fixed by power cycling the router. Or, in the meantime just a random delay the connection may (or may not) be restored on its own.

  I also use a standalone PC application that streams the text given in short bursts and runs all day (no video or music... just short lines of text) with no problems until I launch Firefox in the background. Then he can go a few hours before the connection to the router is lost. I also often watch videos on my Tablet without the router problems. While typing in this issue on a PC I was disconnected from my router. I'm hoping to get some suggestions as to what to inspect or modify. Thank you!

  Fred, I had to leave the House early this morning and had no time to dig a cable long enough to reach my modem to try your suggestion. But, what I did was half of your suggestion. I pushed the reset bit recessed on the modem and left the House around 08:30 with Firefox running on both computers. Seven hours later everything is normal. No router disconnects and I gave a very good workout system.

  I have also now initial notice that connects to the web sites are faster.

  It is obviously a logical explanation for what was going on, but to an outside observer (), I see absolutely no logical link to the 'solution' for the rest of the universe. I won't lose sleep on. And I'm going to ask you more specifically when the next puzzle problem occurs! Thank you, Fred!

• Webapps hosted in disconnected networks the apk or new

  Hello
  I use firefox on android as "customer" for a home automation system main interface. The home automation system based on user/admin gui web that I allowed to 'install' as a hosted web application, and both the gui and the manifest.app a little embarked on a linux embedded custom I use to serve web pages.

  The whole House has a different LAN, and some of them are also disconnected from the internet.

  No longer works with firefox beta and fennec every night, I see that the webapps change, former a new should be built as the apk to an external service. I know that theoretically I can build my apk in my own local network, but I don't have a camera with enough resources to do in any lan, therefore, no way to do it.

  Of course when I try to install just my manifes.webapps to https://controller.apk.firefox.com/ cannot connect to my internal web server, therefore, no way to install my webapp, also, I can't put a webapp online as some House does not have internet connectivity at all.

  Is it possible to achieve what I was used to the way that the 'old' webapps, or I need to build an application web packaged with just a single page just make a redirect to my local web server?

  Hi nextime

  It is a question of developer. This forum is for questions from non-developer people so not really help here.

  I suggest to ask this and other questions of developer oriented to:

  http://StackOverflow.com/questions/tagged/Firefox+or+Firefox-OS+or+HTML5-apps

• Why is that every time I open an application that my phone disconnects from the wifi

  Everytime I open an application that my phone disconnects from the wifi.

  Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom. Maybe one of them will help you.

  (1) perform a forced reboot: hold the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears. Leave the device to reboot.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth).

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) backup and restore the device using iTunes (ask for more details if you wish).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple Store for the evaluation of the material.

  Council: https://discussions.apple.com/docs/DOC-9892

• SOLUTION for your HP printer disconnect and/or constantly disconnecting from the network

  If you are having a problem printing, scanning or fax with any HP printer because of this be disconnected and constantly disconnecting from the network, here again is the fix!

  I thought that this all after several failed attempts with HP Support, my Internet access provider and various troubleshooting tasks including reinstall the HP software and more and more.  Well, through self teaching on internet and exhausting search for 6 months, I FINALLY thought to it.  OMG!  I'm a paramedic (not IT) and a little computer but far not an expert.  I have all of you here!  Nobody seems to have the answer, but I'm sure that I'm doing it to 97%.  Whatever it is, if it please answer and let me know that it worked for you!  :-)

  It doesn't matter if your printer is installed cable or wireless.  You don't reinstall your software, no recycling power of your printers or your router/Modem.  Your printer is unstable on the network and continues to log out or disconnect from the network it is NOT because the software is glitched, it isn't a firewall problem by saying, is not a router problem, is not a problem with your power cord, because most networks use a 'Beach' and IP addresses for security reasons This kind of "cycles" the IP addresses of the devices to reduce the risk of an attack.  A printer is not a threat, but the 'network' don't own human intelligence, so he does not know this.  Here are my step by step instructions on how to basically your printer address IP (static IP) instead of change back through a cycle so drop your printer on the network or disconnected.

  Funny, if you're someone who has had the elements in your print queue, they will not print, and you turn your printer off and on again and suddenly your print... well documents, join my club.  The reason it works is that when you turn on the printer, it starts with the same IP address before cycle.  If you are someone who is sitting there for a while and all of a sudden your printed documents without changing you something... it is because through the cycle of change of IP address, it hits your printers IP address and the network would allow him to print.  Not very funny, I know.  It took me forever to figure out why my printer would print sometimes, but not always.  Since I thought at this point, I can SCAN, PRINT, and use all the features of my HP software installed like HP, Photosmart Essentials Solution Center.

  On your printer, go to menu/Setup/network and press OK.  In the network menu, print a "network configuration page" so you can see the IP address and other settings of your printer.

  Now, back to the main menu on the screen of your printers.  Or you can go to your web browser and type the IP address using decimal numbers too and this will take you to the web page of your printers.  Choose: setup\network, then press OK.  Look for the IP settings and press OK. Choose "manual" instead of "automatic". Manually enter the IP address it as well as the default gateway that you can see the Network Setup page you printed earlier.  Note: If you manually set the IP Address of the printer, make sure that it is outside the range of your router's DHCP. Otherwise you might encounter a problem with IP addresses on your network duplicate. (If you don't know how to do this, write back and I'll explain).  Don't forget to click "save changes".  Now, restart your computer, and print just what you want.  :-)

  A trick I often use with DHCP network printers:
  In printers and faxes, right-click on the printer and select "Properties".  Click Add a new port.  Choose standard TCP/IP port configured for the host name of the printer. Read the host name of the network printer configuration sheet.
  
  Using my method means that you always connect to the printer even if its IP address changes (which can happen with the dynamic configuration). This does not jeopardize the security of your network.  It shows just your printer to stay put and stop traveling the highway of IP address.  :-)

  The DHCP range is the range of IP addresses that the router distributes automatically as devices to join the network.  The DHCP range is determined by the router and each brand has a range that is set at the factory (which can be changed by you).

  Default value for the DHCP of your D-link is 192.168.0.100 to 192.168.0.199.  Thus, outside the DHCP range est.2 a.99.200 a.254.

  Is a handy cheat sheet attached.

  You can change this interval by entering the router settings page - type the router's IP address in a browser, enter the login information and access the DHCP parameter area (varies depending on router, hunting around).

• Airport extreme disconnects when the ivp6

  Airport extreme disconnects when the ivp6 but works perfectly with disconnected ivp6. I use Cox Cable as my internet provider.

  Apple says that Cox has not fully being implemented IPv6 yet.

  Cox said on their website that the Apple routers are not compatible with their IPv6 service.

  It is difficult to know who is right, but IPv6 works very well with Comcast and Time Warner... and routers Apple worked very well with Cox, until Cox began to make changes to their systems.

• Tecra A2 crashes when you are disconnected from the internet

  We have a customer with a Tecra A2 provided by ourselves that, after 5 months without a problem from time to time, hangs when it is disconnected from the internet.
  Reboot the laptop and the internet can be found sometimes up to 20 times and then it blocks again when we disconnect from the internet IE. A Ref post causing VOIP problems were found and the software disabled and disconnected hardware. No difference. Running XP SP2, IE6, Kaspersky Anti Virus, Tiscali ISP ADSL, modem ADSL Tiscal (a new requested just in case). A lot of work to do and lose valuable time with customer problem.
  Thank you

  Hello

  It seems that a 3rd party software causes this very strange problem.
  You suggested that VOIP is causing the problem. Well, the problem is that Toshiba doesn't support any 3rd party software and applications.
  What I can suggest is to check the Event Viewer logs. You will find all the errors that appear on the OS. Double-click the error and you should see the description of Microsoft.
  Maybe you will find a solution.

  Good luck

• Try to disconnect from the iCloud on my Macbook Air (El Capitan 10.11.2) but in system preferences, it says I have to create a new password for my Admin account - and then the new password I get says "password does not match"?

  I am trying to add my outlook email account to the Mail app, but because it's the same email for my iCloud, for some reason, they are linked, and I discovered that I need to disconnect from iCloud, and then add the outlook account.

  But when I try to disconnect from the iCloud in system preferences > accounts on the internet, it says I have to create a separate password - but when I get one it says "passwords do not match"? I tried to do different and same, nothings working: S

  The dialog box is like this:

  [Stop using iCloud?]

  Create separate password for (name of the admin account)

  -You will no longer be able to log in or unlock your screen with your icloud password, and you will need to remember two passwords separately.

  iCloud password: __________

  New password: __________

  Check: _

  Index of password: __________

  [Use the separate password?]

  Not sure why that is, that the password does not when it's supposed to be the new s password?

  Also, I would like to know what to put in the box check?

  Help much appreciated!

  Thank you

  Oh wow. I just realized I was leaving the case confirm the void and the message "password does not match" mentioned. I just need to retype my password. Hilarious that I have not worked this one earlier.

• Satellite A200 Win8 64bits - Atheros AR5006EX disconnects from the network at random

  First of all, sorry for my bad English.

  Hi, I installed W8 a few weeks ago and I have a problem with the WiFi. The adapter disconnects from the network at random. Not a protocol TCP/IP fail because I don't lose the connection to the internet, I lose the connection to the network for everyone.
  Simply disconnected from any wifi network.

  I have read that wifi chips Qualcomm have problems with drivers in W8. I tested many pilots and all do not work properly.

  Any help?

  The wifi card is: Qualcomm atheros AR5006EX and the laptop is: Toshiba satellite A200-1TP.

  Drivers I tested (and didn't work):

  http://drivers.Softpedia.com/get/network-card/Atheros/Atheros-AR5006EX-WLAN-driver-300119-for-Windows-8-x64.shtml

  Thank you!

  Do you have these problems with the operating system supported?
  I mean A200 is pretty old machine and certainly not supported for Win8, so it can be a problem with all of this, especially with the drivers.

  Let's see if someone else has the same machine and have the solution to this.

• Course of time disconnected from the Internet

  Course of time is a/c model with hard disk of 2 TB, clinging to the Netgear CM500 Modem and ISP is Cox Phoenix. Connected devices include 3 iPhones, iPad 1 Air, 1 Macbook Pro, an Xbox, Nintendo DS, Wii U, Apple TV 4gen, 3rd - party transmitter Airplay, Vizio TV

  Internet and backup will fall completely on a daily basis - Green Airport fire watch utility in the time capsule but a yellow light in Internet (says it is disconnected). The real physical lights are all green on Time capsule and the modem. To resolve this problem, I have to restart the time capsule in the menu bar and as soon as it restarts, the yellow light on the Internet turns green and shows connected. I tried to separate 5 Hz to 2.4 Hz network but disconnection remains the same. It's very frustrating when you have to go to the Airport utility to restart time cap every day. Can someone help me with this?

  The last AC version TC and the airport has problems with a number of modems... CM500 has not figured prominently, but the problem certainly exists.

  Do a search you will find that it appears often enough to show that you are not alone. Some offer solutions... YMMV. I think that a lot of these corrections is to restart.

  TWC NETGEAR CM500 connectivity problem

  Cox also began to implement IPv6 which creates problems.

  Loss of internet connection?

  I don't think that there is only one size of the entire solution.

  You can do a reset of the TC... redo the installation... Use names short of all the... APPLE NOT RECOMMENDED NAMES.

  Installed IPv6 in the TC to one of the parameters... and if it falls to try another.

  We recommend that usually people use the link-Local only which is actually turn it off.

  Look through the second link I gave you for some alternatives.

  Unfortunately people may experience daily abandonment with all right. It's just not very well with the latest operating system.

  My recommendation is to replace it as the main router... you can use something cheap, is a TP-Link WR1043ND v2<$50 on="" amazon..="" and="" works="" great="" especially="" for="" 3rd="" party="" firmware..="" bridge="" the="" tc="" to="" it="" and="" use="" it="" for="" wireless="" and="" backup..="" not="">

• my wifi doesn't connect not - says disconnected by the mobility center - but no tile reconnection

  Compaq presario cq57 windows 7

  Wi - fi connection, error message stop said was disconnected by the mobility Center, but there is no tile

  to reconnect as it is on my other laptop. drivers update I tried, but they said ok to update and functional

  grateful for any input

  Thanks for the reply kathles.
  
  If the wi - fi button is blue, which means that it is enabled, it can be excluded that the issue.  I do not see a physical switch on this laptop be so that is also excluded.

  Then I would like you try to remove the device from Device Manager driver.  Then restart the laptop without having to reinstall and see if Windows detects new hardware and invites you to reinstall the driver.  Doing it this way should erase all settings disable the device and force it to reset itself.

  Let me know what the result please!

• MacBook Pro won't feed - need to disconnect/reconnect the battery.

  I have a 'early 2011' MacBook Pro 17 "which does not illuminate when the power switch is pressed.    He worked normally in the last time it was used.

  I'm a PC I / specialist t so I did some fault finding.  Here are the results and measures, I tried:

  1. Power button and no indication button has been pressed.
  2. Button on the side and he said fully charged battery.
  3. Adapter a/c and LED power connector attached LED lights up in green as it is supported.
  4. You press the power button - still no indication of any attempt to power on.
  5. Let Reset SMC pressing SHIFT, control, Option, and power switch.  All released.   You press the power button - still no indication of any attempt to power on.
  6. Power button which is held down for 15 seconds, released, then no hurry once - no change.
  7. Disconnected a/c power.
  8. Removed the back cover.
  9. Battery disconnected from the system board connector.
  10. Connected a/c adapter and power button pressed - no change.
  11. Disconnected the a/c adapter.
  12. Back in the connected battery system board connector.
  13. Joint a/c adapter and the system performed a reset, then IPL upward and ran normally.
  14. System "Shut down" and then press the power button - would not be back.
  15. Removed the a/c adapter and pressed the power button - still wouldn't back off.
  16. Disconnected a/c adapter, disconnected the battery, battery reconnected to the system board.  Power button - will not turn on.
  17. Repeat the procedure which worked previously - a/c offline, disconnected battery system board, connected a/c, press button power (no signs of activity), disconnected a/c, battery reconnected to the governing body of the system, reconnected a/c and it reset and power!
  18. Let system and then "reset" (instead of closing) - it restarts correctly.
  19. Shut down the system and then I tried to power - will not turn on.
  20. Bottom line: it seems that the procedure which will get the system starts, after it is closed: disconnected a/c, disconnecting the battery system board, connected a/c, press power button (no signs of activity), disconnected a/c, reconnected battery to the system board, reconnected a/c and it resets and starts.

  OK, so you MacBook Pro experts out there... what seems to be the problem and what measures would you recommend I take?

  THX,

  Jeff

  Hi Jeffrey,.

  Welcome to Apple Support communities.

  Looks like you did some troubleshooting while trying to solve the problem with your MacBook Pro turns is not on. The article below provides some additional troubleshooting steps that should help you further isolate and resolve service installation or question.

  If your Mac will not turn on - Apple Support

  See you soon.

• iCloud email account repeatedly disconnects in the mail

  During the day, my iCloud email account doesn't work 4 or 5 times, with a triangle next to the error of Inbox and 'account' at the top right of the main window

  By turning the wifi off and on again solves it. But I can't solve the problem:

  -stop smoking and restarting Mail do not work

  -choose to put online account does not work

  so far, I have:

  -improved 10.10 to 10.11 - same cause in both versions

  -disconnected iCloud in System Preferences, and then signed in

  -deleted the Mac HD and performed a clean installation of 10.11, and Resigna in iCloud

  NO change

  When disconnects in the iCloud account, my other email accounts and Web pages work fine.

  Any ideas? Thank you!

  This article may or may not be applicable If you cannot send or receive e-mails on your Mac - Apple Support

  or, get help using iCloud Mail - Apple Support