Discover the Network Configuration

Similar Questions

• Every few minutes, the message "the network seems to be down. Is the network configured correctly? »

  When you play Pandora, every few minutes, the message "the network seems to be down. Is the network configured correctly? "is displayed. I click OK and Pandora continues. Network connection diagnostic report no problem. I have the BDP-S390 and a cable network.

  Hello Thomas,.

  Also, try using a different Ethernet cable or try to connect the player to another router's Ethernet port. He may be a problem with the Ethernet cable taking Ethernet to the router/player.

  Make sure that the Internet speed is 2.5 Mbps for SD videos streaming and 10 Mbps for streaming HD videos.

  If my post answered your question, please mark it as an "accepted Solution".

• HP Envy 5540: Printer Hp Envy 5540 randomly printed the Network Configuration Page

  Hello!

  I bought this printer about a month ago. Set up the connection to the printer wireless with my wifi, and my understanding is that the printer is protected like my wifi and use the same password in order to print something. I kept my printer connected and 'standby mode' since I put in place. The night last at about 23:00 when I was in bed, the printer turned on randomly and printed a "wireless network configuration page" that has had a lot of information, including the IP address and listing my name wifi as well as the names of my neighbors wifi in the surrounding apartments.

  I'm trying to understand why this printed, because I certainly did not do. Anyone have access to my wifi, or has someone may simply try to print something and selected my printer as it should appear on the "list available connections on the computer of anyone, given that the printer is turned on? How could they print this sheet of network configuration if my printer is password protected?

  I'm mostly concerned about someone who has access to my internet if they could print this page somehow, but maybe it happened just when they tried to connect to it, and it did not work while trying to fix MY printer?

  I would appreciate any idea on the issue.

  Thank you!

  Hi @printerprob5540,

  Welcome to the HP Forums!

  I saw your post on how your HP Envy 5540 randomly print a Network Configuration Page. I'm happy to help with this problem!

  I find it very strange considering the only way to print the Network Configuration Page, AFAIK, is with the following steps:

  • Make sure that there are size A4 or US Letter, unused, plain paper in the feeder.
  • On the printer Panel, drag the screen to the left and then press Setup.
  • Touch tools.
  • Drag upward on the screen and then tap Network Configuration report.
  • A Network Configuration Page prints up to three pages of information.
  Figure: Example of a Network Configuration Page

• The network configured GBA 4.2 device report

  I'm trying to shoot the report of all devices in the network configured in ACS. But I'm not able to pull it, can someone let me know how to extract the network devices configured in the device of the ACS.

  If I understand the question, you want to export the AAA clients / network devices. You can get the aaa clients/devices information in excel sheet at the bottom of the steps:

  Go to network setup > Search > maintains the search that is default parameter to search the entire. Press search. There will be a 'Download' option that will appear in the left corner of the search results. Click on save this list.

  This list will include,

  -Name

  -IP address

  -Type

  -Name NDG (if applicable)

  NOTE: this will not contain customer AAA Shared Secret keys have been configured with.

  ~ BR
  Jatin kone

  * Does the rate of useful messages *.

• Change the IP address in the user profile of the Network Configuration?

  I added some users on the network configuration in order to change the ip address when they are in the other site, but in Windows 7 it is inviting to enter the user name and password, if a single user, enter the name password it will allow them to change the ip address how to change so that the user is able to change your ip without asking for a password and username?  How can I solve it... Thanks in advance.

  Nerdcat

  Address you internal IP is defined by the router or the ISP based on your configuration.  If you try to change the internal IP address using "static IP" you shouldn't have to enter a user name and password so that it is in configuration and fixed like that.

  You cannot change the external IP provided by your ISP it however.

• WiFi stop working when 9.2.1 upgrade... A does restore the network configuration and still does not!

  from one day to the next my phone is suddenly being updated to 9.2.1. Since then my wifi was NOT working period. Have excellent wifi signal and still absolutely nothing. I reset the network settings and nothing works. Never been a problem until this 9.2.1 update

  I have the same problem after updating ios 9.2.1

• Newbe question about the network configuration of ESXi 3.5

  I have ESXi 3.5 works well on a Dell Poweredge T300 server.  I want to connect a Netgear ReadyNas Pro Business Edition for this Dell and connect by iscsi.

  I want to connect 1 network card of the ReadyNas for 1 network card on the Dell printer.

  My question is on the Dell when I go to the ESXi server and customize by pressing F2 and goto network settings I see the following:

  X vmnic0 embeeded nic1

  NIC2 integrated vmnic1 used by vswitch1

  I'm may be thick but can you explain what NIC on the ESXi server is used for access interenet and I need to configure for iscsi?  I thought that it should be obvious, but it is vmnic0 or vmnic1?

  Your ESXi host has two vswitchs configured what uplinks to physical NIC in the system.

  vSwitch0 what uplinks to vmnic0 (who, although a red x, indicating a problem seems to be very well) this vswitch holds you management interface (IP 192.168.2.107) and a portgroup of VM for your virtual machines. You also have an another vswitch vswitch1 what uplinks to GB NIC vmnic1. This vswitch has unused virtual machine port group. Also a VLAN ID has been set for this vswitch which would lead me to believe that VST is / was operating on that host in the past.

  Haven't you set up this? If this isn't the case, I would get with one who did.

  Order "the great vSwitch debate" parts 1 and 2 to start.

  http://kensvirtualreality.WordPress.com/2009/03/29/the-great-vswitch-debate-part-1/

• My iPad is not visible for my iPhone via Bluetooth 6 and won't connect, I tried to reset the network configuration, erase and reset iPad, hard reboot. My Apple Watch is connected to my iPhone. It is visible for my Samsung phone.

  My iPad with Retina display (wi - fi model) to pair it with my iPhone 6 + Bluetooth is no longer visible to my iPhone and will not pair. I have reset settings network, restart hard iPad, iPad are erased and recondition. The iPad is visible and pairs perfectly with my Samsung Galaxy S, no issues what so ever. That's happened? My Apple Watch, which is paired with my iPhone interferes with the matching to the iPhone iPad? The iPad pairs with my MacBook.

  Duncan2011 wrote:

  My iPad with Retina display (wi - fi model) to pair it with my iPhone 6 + Bluetooth is no longer visible to my iPhone and will not pair. I have reset settings network, restart hard iPad, iPad are erased and recondition. The iPad is visible and pairs perfectly with my Samsung Galaxy S, no issues what so ever. That's happened? My Apple Watch, which is paired with my iPhone interferes with the matching to the iPhone iPad? The iPad pairs with my MacBook.

  You can only pair two Bluetooth to attach only apple devices.

  Here are the profiles of support iOS: Apple supported Bluetooth profiles supported -

  Get help with Personal Hotspot iOS - Apple Support

  Share your Internet connection with Personal Hotspot - Apple Support

• I have a question about the network configuration

  Hello

  I'll set up a network with 8 computers. My logic is correct?

  I have an internet connection by cable to come in the main office. I was going to plug the BEFSR41 "Router EthernetFast cable with switch 4-port" to the internet. Then plug 3 computers and an ethernet cable that relate to an EG008W "Gigabit 8-port Workgroup switch". Then plug the remaining computers to the EG008W.

  What is the correct procedure?

  Thank you

  Greg

  Thank you!

• Help to find a value for the Network Configuration DVS of coding

  Good day to all,

  I have a workflow that migrates from the host and the vm to one vCenter to another.  The workflows get a list of all virtual machines, as well as the folder it's in the name of the portgroup he uses. The workflow, and then disconnects the host on the vCenter source, deletes a physical network adapters of the dvs, add the host to the VirtualCenter new and attached the bear who has been removed from the new DVS then loops through the virtual machine to the virtual machine in the right folder and linking the new DVS then migrated the vmkernel ports to the new DVS and this is now where I'm stuck

  To move the other natachasery in the new DVS the VcHostNetworkConfig() wants the uplinkPortKey and I just seem to have all kinds of problems in the future with this value and was hoping someone might be able to point me in the right direction

  Thank you

  Steve

  I found what I was looking for and I wanted to share in case this information will help anyone

  -FetchDVPortKeys-

  criteria for var = new VcDistributedVirtualSwitchPortCriteria();

  Criteria.Scope = host

  Criteria.Inside = true

  criteria.uplinkPort = true

  var upPortKeys = dvSwitch.fetchDVPortKeys (criteria); dvSwitch = VmwareDistributedVirtualSwitch

  for each (var i in upPortKeys) {}

  System.log (i)

  }

• The network configuration of the problems using my IP as URL - VMWare?

  Hello

  I had a few problems with trying to use my IP (via VMWare Player - Enterprise windows serv. 2008) but I keep getting as the page is not responding or these error messages. What I try to do is host a Web site on the server PC with IIS, but I do not know why it does not have to run it during the INVESTIGATION period (of course it works on localhost) but is not relevant in this case I guess... However, I was wondering if it MIGHT be some network setting within parameters of VMWare Player? For the moment under "Network connections" in the control panel I "Bridged: directly connected to the physical network.

  PS The IPv4 address on windows server 2008 ends par.200, while my pc (host) ends (3). Yesterday, I managed to make the WinServ avoir.19 on the end, I don't know if it matters in this case however.

  P.S.S. The right ports are open as well, so I don't really understand why it does not work...

  I hope that someone of you guys can help me solve my problem-i would be very grateful!

  Best regards

  Anton

  Lets start with some basics, the guest has base of Internet/network connectivity?  In other words you can access Internet from the guest operating system?  Also, the host can successfully ping the IP address of the host and the guest can successfully ping the IP address of the host?

• I can't connect to the network wirelessly with my Emachines eM350 portable because I get the automatic Wireless Configuration error, see Article 871122.

  original title: WiFi

  I can't connect to the network wirelessly with my Emachines eM350 portable because I get the automatic Wireless Configuration error, see Article 871122.

  I use a Huawei E585. I simply want to clamp it alll in the tray.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  (1) make sure that u run "NET START WZCSVC" on the command-line as soon as u Ouvrezunesession WINDOWS XP (START, RUN, NET START WZCSVC (command line)).

  (2) START, CONNECT, WIRELESS INTERNET CONNECTION

  --> under the 'GÉNÉRAL' tab: (1) right click on the wireless Internet connection; (2) click on properties; (3) make sure that all THE ELEMENTS under the title "THIS CONNECTION USES THE FOLLOWING ITEMS" are COMPLETELY FUNCTIONAL, i.e. UNCHECK THE ONES THAT DO ARE NOT ACTIVE ~!  (I recently turned off AVG and that this item has been inadvertently clicked on ~!) ;

  --> on the 'ADVANCED' tab: run the NETWORK CONFIGURATION WIZARD to reset your network

  3) http://support.microsoft.com/kb/871122 --> RUN 'DIFFICULTY CE PROBLEM' (ms - fix 50469)

• HA installation failure due to a misconfiguration in the host network configuration?

  We have no setup problem on a cluster HA containing 2 ESX 4.0 host. However, after adding a host ESXi 4.1 and configuration HA to contain all 3 hosts, HA shows failure due to a misconfiguration in the network configuration for the ESXi 4.1 host host.
  
  Remembering this bad spell names network could cause a failure of HA configuration, we proceed to rename network management Service Console host ESXi 4.1 in order to match the network management of the ESX 4.0. However, this does not.
  
  ESX and ESXi are able to mix in a HA cluster in the first place? Any advise?

  crescendas wrote:

  ESX and ESXi are able to mix in a HA cluster in the first place? Any advise?

  Hello

  Yes, you can mix ESXi and ESX on this same cluster

  1. Check your DNS - should resolve to long and short names of all nodes in a cluster that you
  2. are the new ESXi in the same IP subnet as the older ESX servers?
  3. try to disable and enable HA
  4. Check below link
     http://KB.VMware.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=1001596&sliceId=1&docTypeID=DT_KB_1_1&dialogID=213574287&StateID=0%200%20213576136

  Good luck

  See you soon
  Artur
  

  Please, do not forget the points of call of the "useful" or "correct" answers

• Configuration of the network during installation Linux4 update5

  Hi all
  
  I would appreciate if someone could help me with a problem I have.
  
  I want to install Oracle Apps 12.1.1 on update Linux4 5 on my own PC. It would not be any other OS on this system so that the system would not for Oracle applications.
  
  I refer to the following website to know how to install Linux for Oracle.
  
  http://appsdba.info/docs/oracle_apps/RedHat/oel4.PDF
  
  According to this document, I should get a screen to set network configuration which I did not. I thought that it would be not only important to configure the network so I worry when I don't have it. But after installing Linux, I couldn't connect to the Internet. Someone told me about a successful Oracle Linux applications, installation you must have internet working!
  
  Is someone can you please tell me why I don't get the network configuration screen during the installation of Linux? OR if there is no other better way to set up the network? I am a beginner in installation of Linux and Oracle, and need some more will certainly help in the future. Thanks a lot for your help in advance.
  
  Kind regards
  Anshul

  According to this document, I should get a screen to set network configuration which I did not. I thought that it would be not only important to configure the network so I worry when I don't have it.

  Didn't get what? What stage are you talking?

  What is the entry that you have in the file/etc/hosts? What is the output of "ifconfig - a"?

  But after installing Linux, I couldn't connect to the Internet. Someone told me about a successful Oracle Linux applications, installation you must have internet working!

  That's not true, and you don't need to have an internet connection for Oracle EBS work. However, if you install on a virtual machine, you should be able to access the internet from the computer asked if the host computer is connected to the internet.

  Is someone can you please tell me why I don't get the network configuration screen during the installation of Linux? OR if there is no other better way to set up the network? I am a beginner in installation of Linux and Oracle, and need some more will certainly help in the future. Thanks a lot for your help in advance.

  Again, thank you for mentioning the steps you are talking (including the page number).

  Have you reviewed the steps described in the official Oracle EBS Installation documentation?

  Oracle E-Business Suite installation and upgrade version Notes 12 (12.1.1) for Linux x 86-64 [ID 761566.1]
  Installation of Oracle E-Business Suite and 12 (12.1.1) for Linux x 86 version upgrade Notes [ID 761564.1]

  Thank you
  Hussein

• My laptop that is running windows xp does not recognize the computers on the network running windows 7. Any advice?

  I recently created my home network again.  It consists of a laptop running windows 7 Professional 64 b, b Office windows 7 Professional 32 running and a netbook under windows xp home.  Two computers running windows 7 recognize each other and share correctly, but the netbook will not recognize the other computers on the network at all.  They can see it, but then say they can't access them when you are trying to access.  They are all on the same workgroup.  Computers that run windows 7 discovered the network, file and printer sharing, and public folder sharing all lit.  Password sharing is disabled and windows manages the homegroup connections.  Any advice would be appreciated, I need to use computer dvd players 7 on the network to install some things on the netbook.

  Hi mahmorc,

  ·         You get the error message?

  Follow these methods.

  Method 1: Follow the steps in the article.

  How to troubleshoot a network home in Windows XP

  http://support.Microsoft.com/kb/308007

  Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After the boot minimum troubleshooting steps, follow section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start and then click Run.

  (b) type msconfig and click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal Startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: Update the latest drivers for the network card.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658