Discovers server and firewall security problems

Similar Questions

• AVG and WINDOWS SECURITY problems 8

  Since the installation of Windows 8 Pro, the operating system is not recognizing my AVG Internet Security 2013 and Red Guard scoring only two windows and

  AVG Security are turned off.

  When I try and turn on AVG, nothing happens. The AVG Control Center is showing that my computer is fully protected, and all systems work

  correctly.

  As a temporary measure, I can turn off all Windows follow-up or activate the Windows Firewall and defender. I currently use the latter.

  I worked for a while with the support staff AVG, which were extremely useful, but we all verification, we can. Their point of view is that it is a

  Problem of Windows 8, because it worked perfectly under Windows 7 Home Premium, and I agree.

  I would be extremely grateful if anyone can shed some light on my problem.

  FYI main Hugh Parker my e-mail address is * address email is removed from the privacy *

  I had this problem too. I looked and looked for a solution without success. But there is a simple solution that I accidentally discovered the problem.

  1. go in Control Panel > administrative tools and run Disk Cleanup
  2 when the disk cleanup is finished to calculate how much space can be freed, click Clean Up system files.
  3 disk Cleanup recalculates and when to ensure that there is a check mark next to the Windows Clean-up update.
  4. click OK (depending on the amount of the Windows Update files to clean it can take some time.)
  5. When this is done, restart your PC/laptop.

  The problem should be solved, at least it was for me, if there is no 100% guarantee.

• Properly requested and authorized security problem blocks content in Firefox

  Hello

  Since the upgrade to Windows 10, I am desperately looking for a way to debug - currently, out of the four installed browsers, only Firefox supports debugger player correctly...

  That would be ok, except...

  For Firefox and only for Firefox, when using the debugger last plugin, content applications outside the domain container fail with a violation of security without even _attempting_ read the crossdomain.xml valid (and available) for this resource.

  In FIREFOX, I can read XML of RSS. < DomainName > where I have RSS. < DomainName > crossdomain.xml in place

  In FIREFOX, I'm IMPOSSIBLE read JPG img. < DomainName > despite his img. < DomainName > crossdomain.xml in place

  In subject the other browsers, all assets are properly requested and displayed correctly.

  HOW CAN I FIX?

  G

  PS: in the case that it is important; Win 10 to 64-bit.

  OK, so what we have done to resolve this;

  1 eliminate root - entry TGV on our well field force redirection to HTTPS

  2. on machines where the HST problem has been cached and cannot be resolved by the Firefox article.

  2.1 uninstall Firefox

  2.2 remove all traces of Firefox - remove C:\Users\\AppData\Local\Mozilla and C:\Users\\AppData\Roaming\Mozilla

  2.3 reinstall Firefox

  Then...

  That sucked.

• big and strange security problem

  Hello
  We have installed oracle 10g R2 on a Win 2003 server. We have created 3 databases. We have created PWDFILE on windows for each. But in sqlplus, we can connect sys as sysdba with any password (I mean that you need not know the correct password, you can enter any word).
  
  And we have this setting for all:

  SQL> show parameter remote
  
  NAME                                 TYPE        VALUE
  ------------------------------------ ----------- --------------
  remote_login_passwordfile            string      EXCLUSIVE

  What is the problem? And what is the solution?
  
  Thank you.

  Hello

  If your user name is included in the ora_dba group, then he allowed to connect with a sys with any password.

  concerning

  Jafar

• URL to connect to the server and DMZ security server

  How everyone puts in place the URL to their connection and security servers?

  I would like to set up a friendly URL for users and technical staff do not forget to connect to the infrastructure of the view, but I have to have 2 separate URLs for the network internal and external WAN connections?

  A few weird DNS environments here too... so I would be useful to have detailed answers, parts of my LAN use external DNS and some parts use internal DNS... and it is out of my control to change this configuration.  Thank you.

  I've done that to add a manual in my internal to resolve DNS extries say view.abc.com to the internal IP address. then on my hosted public DNS, I would resolve external public IP address view.abc.com.

• I get a pop up message the first time I open Photoshop CC for the day, "we sorry that we are unable to connect to the server from adobe at the moment..." I followed instructions to turn off my antivirus and firewall, then open it. But the problem still re

  I get a pop up message the first time I open Photoshop CC for the day, "we sorry that we are unable to connect to the server from adobe at the moment..." I followed instructions to turn off my antivirus and firewall, then open it. But the problem still remains. What can we do?

  Moved to this discussion in the creative forum cloud download & install.

  R.O.B. Please see Sign in, activation or connection errors. CC, CS6, CS5.5 - http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html for more information on how to resolve the error of connection between the computer and our activation server.

• Microsoft Security Essentials and Firewall error code 0 x 80070424

  I am a user of both Windows XP service pack.  I get the error code 0 x 80070424 every time I try to say Security Essentials to begin to monitor my computer.  I can't throw it as my windows either firewall.  It all started as a result of a virus/malware attack I could clean it with Malwarebytes.  I have was able to restart Windows Updates and went through several updates, the facilities and the re - start, but I still can't get Security Essentials or my firewall running.  I also ran Microsoft Fixit and yet the problem remains.  Help, please!  Thank you!

  Furthermore, I now use a new firewall from sygate and I also did a scan with temporary microsoft virus program and it come clean.

  Glenn

  Hello

  Method 1
  I suggest you run virus scan online by using the Microsoft safety scanner.

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: when you do an antivirus online, you will lose data that are affected by the virus. Microsoft is not responsible for the loss of this data.
  
  Method 2
  Error code 0 x 80070424 you describe also means "ERROR_SERVICE_DOES_NOT_EXIST". Windows Update depends on the following two services:

  (1) Windows Update
  (2) background Intelligent Transfer (BIT)

  If it turns out that these services are disabled or missing, you will encounter this error code. Therefore, you will need to ensure that the necessary services are available and running. Here's how:

  a. Click Start, click Run and type "services.msc".

  b. double-click on Background Intelligent Transfer Service.

  c. If the start State lists Stopped, click Start and then click OK.

  d. double-click Windows Update.

  e. If the start State lists Stopped, click Start and then click OK.

  f. double-click workstation.

  g. If the start State lists Stopped, click Start and then click OK.

  h. close the Services window and try to install updates again.

  Method 3
  I suggest you to scan SFC. Scan SFC will be scans all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
  http://support.Microsoft.com/kb/310747

• Best calls "Windows Help" Attorney call me to say I have a security problem on my PC and wants that I let him remote connect to solve this problem, it is legitimate?

  The first few times we call I refused to listen to because it sounded wrong, but this time I heard him out and that's what they said. First, he was of the India, I think his accent and he said he was calling to inform me about a security problem with my PC, it is said to "Best Windows Help" and that my network was showing at its end with a red light indicating a problem. He had opened the Run command and type of command bar to display the observer of events and go to the newspapers of Win and click Applications, then he wanted me to scroll the Application events and see how many errors was there. Between 20 and 50 I said, he said oh yes you have a problem and that he could fix in a few minutes, then it puts me in a collaborator of his that says display the control bar run then type "Iexplore www.support.me" which led me to a "Logmein Rescue page to https://secure.logmeinrescue.com/Customer/Code.aspx. At this point, that he asked me to give him full access to my PC in which I said, "you're crazy, no way" and he said OK then your PC will freeze and crash and I said a few words very friendly back and hung up. They seem to call every month or two and it looks like the same guy. Is it a Con? Who is this company "best Windows Help and how are they finding me? They say the information they hold comes from Microsoft. My caller ID lists like V052409070106, phone # (202) 011 - 3341. What is everything. Also, my PC is not crash or freeze because I installed it 2 years ago. I am running Win 7 Pro with Microsoft Security Essentials and windows Firewall behind a Cisco router.

  Scam.  They said that my computer was downloading malicious code and therefore transmit signals the error on their server.

  They have a Web site, as afar as I can tell.  I asked the guy at the phone for his site.  He couldn't give me a Web site URL or couldn't pronounce correctly.  He was frustrated and hung up.  Scam.

• The Windows Security Center Service was unable to establish even queries with WMI to third-party antivirus monitor, anti-spyware and firewall.

  Original title: do I have to re - install Windows 7?

  Today, I opened the Action Center and noticed that Panda Internet Security reported he was off, when it wasn't.  I checked the administrative events and one of the errors was: Security Windows Service Center could be same queries WMI to monitor third party antivirus, antispyware and firewall.  I've got Panda IS 2012 running, which is a very good program.

  I just spent a good hourzs little addressing a Panda technicina, who, after a lot of faffing autour, told me that I either set up a new profile, or I re - install Windows, I don't want to do, because I could lose the system restore facilities, (I had to ask Microsoft to help me address the issue of the restoration of the system because it did not work).  The problem with the Security Center Windows Service dates back to August 10, 2011.

  Anyone know what I'd do, which involves having to uninstall and reinstall Windows?

  Kind regards

  Emma D

  Hello

  1. which parameter is used to install Panda antivirus?

  2 did you use typical or custom?

  If you use Panda IS 2012 as an anti-virus, then Windows Security Center may have disabled the native Windows Firewall, that does send a real-time alert. You can try shooting the alert and check.

  Disable security Messages and other system Notifications in Windows 7

  http://TechNet.Microsoft.com/en-us/magazine/dd492018.aspx?LC=1033

  Important: Select the security settings, once you have done to solve the problem.

  You can also check the parameters of Panda IS 2012 to allow the automatic update and other necessary parameters.

  To try to update manually, follow these steps:

  un) right-click on the icon of Panda Global Protection 2012 on the taskbar

  (b) in the menu that appears, click Update to start the process

• TMS and improved security server TCS

  Hey there everyone!

  On the Tandberg Web site, there is a page that contains updates for the OS that have been tested for use with the administration server and content server security.  However, the last update was 9/2010.  Is there a comparable download page here on the Cisco site, with versions I hope more up-to-date?  I have looked, but could not find.

  Thank you!

  I asked one of the ancient engineers TANDBERG, who is now with Cisco, just on this subject, and he indicated that he had used the Windows Update normak, even for the TCS, feature and if there is a problem, he would just roll back this particular update.

  I did exactly that with our TMS server and have not had a problem yet.

  The second generation servers TCS are not devices and doesn't look anything like first generation servers, so I'll start doing the same thing with the TCS as soon as the remaining 2 were replaced by more recent, industrial research material.

  Cisco had a contract to upgrade in place for some time, maybe even the case, that they are eager to get rid of the old boxes of TANDBERG TCS - well, it's the impression that I myself still.

  Bravo jens

• Problem connecting to the server, error connection server and printer offline. I have a HP photosmart printer and Windows 7?

  My printer is not printing. It say problem connecting to the server, connection error server and printer offline. I have a HP photosmart printer and windows 7.

  You have McAfee? McAfee has been updated at the same time as the last batch of updates from Windows 7 and it seems to be the cause of this problem for most, if not all, users.

  See the communication from this "criticism" - McAfee

  Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

  You should make the fix McAfee, if necessary. There are corresponding communications for their enterprise products.

  I got McAfee, but the connection has started working again on its own so I thought I was clear of problems. However, when I checked it says he was doing routine checks the updates in vain when I told it to do a manually. So stick with McAfee you don't follow their procedure of fix would have upgraded my PC at risk by not updated and, like other McAfee ads have since explained, the application did not refer to its database of threats correctly [and this could explain part of the variability of the symptoms of failure but all involved loss of internet connection]. Actually, I removed McAfee then installed Microsoft Security Essentials rather & my answer IE is faster I knew it [even though I had the Add-ons McAfee disabled for centuries].

  I had to run the removal of McAfee Development tool a few times before and it caused a problem with the license if the PC was not connected to the internet during the abduction. Due cat of McAfee support reset their files in order to allow the relocation-reactivation. Here is their link cat - McAfee - media contains the link to the cat

• Set up the RSA only for security server and not internally?

  Greetings,

  In the view Configuration > servers > Edit View connection servers > authentication, you can enable the RSA. However, I would like to use RSA for people who connect through the Security Server and not those who log internally.

  Does this mean that my only option is to add another view connection server and point the Security Server on this connection to the server on which I have activate the RSA?

  If so is not necessarily a problem, but it would mean, I have 3 servers of connection and server 1 safety for an environment of view rather small.

  Ideally, I was balancing these aswell which would mean 4 servers connection and 2 security servers. It is perhaps a little exaggerated, heh.

  Anyone know of an alternative solution?

  Thanks in advance!

  The way you describe it is the way to do it. The Security server is always associated with a connection to the server, so no way around it.

• Security Server / connection to the server and windows 2003 server roles

  Y at - it no server role recommended I should appy to each of my servers windows 2003 in order to better to run/manage the

  1. security in the DMZ server and

  2. Broker within the network Corp.

  or better, I'll have no windows server role defined on two machines?

  Well, officially, you can use the Security Configuration Wizard to lock your server more far. But I saw that it really breaks things. I would just disable services you need (as always) and trust in your firewall. Of course, only open ports on your firewall required specifically by the Security server. Internet: 80 and 443.

• Problem with El Captain (5.1.7 server) and the management of permissions

  Hello world

  I have a big problem with our Mac Mini Server (El Captain) and the server program.

  In recent weeks, the server didn't give the permissions of a folder.

  for example:

  Mr. X had permission to read and write to a folder.
  Mr Y too.

  Mr. X has create a new folder one record something in it.

  Mr Y had the permission to read or write to the folder create Mr. x. But he should have.

  Or

  Mr. X has save a file to a folder

  When he opens it again it is write protected and cannot be replaced.

  So you have to save under a different name in the same folder.

  And every time he save/close the file.

  Anyone know what could be the problem?

  Thank you

  Greetings from the Germany

  Chris

  My guess:

  A few weeks ago someone messed with the permissions on your server and made a mistake. So, you got an inappropriate list ACL (Access Control), which is rampant in the file and must be removed or fixed.

  http://www.TechRepublic.com/blog/Apple-in-the-enterprise/introduction-to-OS-x-AC cess-control-lists-ACL.

  C.

• Problem: Windows Security Center gives me a "alert" that my anti-virus is turned off, but I am running Windows defender and Microsoft Security Essentials.

  Windows Security Center gives me a "alert" that my anti-virus is disabled.  I have Win XP Professtional and'm running Windows defender and Microsoft Security Essentials times which I recently uninstalled, restarted the computer and reinstalled more updated.  I read related security problems, but I have not found a match.  I have a screenshot of the Win Security Center Alert, but unable to attach.  It is said: ' Windows found multiple antivirus programs on this computer, but they all report that they could be updated or disabled. " Click on the recommendations for suggested actions... [what I did without success, i.e. update.  «[I uninstalled, stop, rebooted and reinstalled and updated]»

  When I shoot to the top of MSE it says, "protection is enabled, and updated definitions.

  Windows Defender said: "Nothing detected" and "computer running normally."

  Before the uninstall and update, I ran System Mechanic from Iolo, who has done wonders for speed.

  Norman

  When it comes to antivirus software, you want one and only one installed and running on your computer.  Two or more may come into conflict with eachother and degrade performance.  I advise you to uninstall Windows defender and use soley mse.

  also I strongly suggest that you avoid using "PC optimization" tools.  They can help a little, but they often do more harm than good.