disk ports hard m9300t

Similar Questions

• I can't install the second disk sata hard

  I have a problem when install the second disk sata hard
  I bought a new one 500 GB and I installed windows xp sp3
  and it works well I plugged in SATA 0 port
  When I want to install a second sata hard disk 320 on sata 1
  and it has an important data, windows will reboot, and do
  blue screen sometimes 'NTFS.sys"or"SCSIPORT.sys.
  and it is written "DRIVER_IRQL_NOT_LESS_OR_EQUAL".
  If someone help me what should I do or there is no FIX for this problem.

  in the BIOS I have regcognized both hard drivers:
  IDE pri master 500 GB
  PRI IDE slave 320
  Second master IDE-
  Second slave IDE-
  PORT SATA - 0
  SATA 1 - PORT

  I plugged the IDE 2 cd-rom

  ----------
  Specification of the device:
  Windows xp sp3
  card mother gigabyte 848P
  Intel ICH5
  Intel 8I848p775-g
  Celeron D Socket 775

  You said that the hard drives are sata but your bios recognizes them as IDE depending on your position. You might have to set your bios to operate in sata mode or enable AHCI of have recognized them as sata. Regarding the error you get, look in the system BIOS to boot from hard disk command menu. This is different from the command menu of usual starting where you choose each time you start a cd ROM or hard drive ect... The parameter that I refer to determine which hard drive of your computer starts on the first. Change to the primary master 500 GB disk > save your settings and restart your computer. Even if one is defined as main and the other slave is not serious. Some bios have the ability to choose what hard drive to boot from. In other words, it is adjustable to start first on the slave drive.

• How Windows XP Setup (F6) to use an instead of a floppy drive usb flash drive to find the drivers for a disk sata hard

  Hello

  How can I install Windows XP Setup (F6) use an instead of a floppy drive usb flash drive to find the drivers for a disk sata hard.

  Kind regards
  Imane

  Hi Mike,.

  You can not install it. This must be done using the floppy drive. This feature is available for Vista and Windows 7.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• disk error hard laptop computer hp Pavilion dv6

  I get three disk errors hard when I do drive hard main self-test: hard drive 1 303 fast and complete 1 305 hard drive and hard drive 1 smart 301. Also, I can't open windows normally, it will just go straight to the repair start and even that does not work! I don't have the chance to back up my files and I don't want to lose them. Help, please!
  Thank you

  The hard drive has failed and needs to be replaced. Once you have replaced the HARD drive you will need to perform the HP system recovery so that Windows and hardware drivers are reinstalled correctly.

• If I have not access to the disk partition hard base would impact on the installation of a complete operating system?

  Original title: TPG Server petition.

  I wanted to know if I di not actually have access to the disk partition hard base would impact on the installation of a complete operating system of Windows 7 Home Premium 64-bit? Instead of having a computer with a complete installation of windows mine came with versions of WinPE OEM, NT and MCE. The GPT partition server that I can see is protected. Partial operating systems seem to be installed on network disk Volumes. I think that what I have to do down the disk hard real all delete and start again but I'm having a problem to see what is all about the drive through programs and remove what I find. He also seems to have a certain type of script hidden BIOS more wrinkles to retail and canceling all decisions on versions of the oem .cfg files. She configures and installs the server instead of windows 7 Home Premium 64 bit server software. The installation gives the highest administrative authority to the network administrators who I don't know and have never met and to manage my personal laptop. It creates a serious problem when I want to use my computer for one purpose and that some people I don't know and have never met want me to use my computer for something else.

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  TechNet Forum
  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope this information helps.

• Partition 32G BootCamp, Virtual Disk - flat hard 125G file!

  Hello

  I recently installed VMWare Fusion on my laptop OS X I have created a BootCamp partition and installed XP. I created a partition of 32 GB for XP. I noticed my OS X partition to fill quite quickly. I used "from" to find the culprit and it's a 125 G file created by VMWare Fusion! Is this normal? This seems excessive. The file is located:

  / Users/tammy/Library/Application Support/VMware Fusion/Virtual Machines/Boot Camp of Camp/%2Fdev%2Fdisk0/Boot partition.vmwarevm/Virtual disk - flat hard

  Is it possible to get a little less of my OS X Fusion disk space use?

  Thank you.

  Tammy

  Well, I had to do a little research and what I found out, is that you can not directly mount a virtual secondary drive while he lies in the Boot Camp Virtual Machine partition and I've tested this with both one unformatted and formatting virtual hard drive and got the exact error and message in the absence of additional information in the log file then here is what you can do.

  You can modify the Boot Camp partition.vmx change ide0:1.present = "FALSE" ide0:1.present = "TRUE" then boot partition Boot Camp Virtual Machine and see if the disc is visible in Windows Explorer and if it is not then it has not been formatted and contains nothing, in which case you can remove it from the virtual machine and leave within the Boot Camp partition Virtual Machine package or...

  Move the file Disk.vmdk virtual and Virtual Disk - flat hard to the desktop, press ctrl + click on the Virtual Disk.vmdk, and then select open with > VMDKMounter and see what message you get if any.  If it does rise and you get an error message appropriate then it can be deleted safely

  Understand that even if I know it's a pain in the thigh but I need something technically absolute that is within reasonable limits, before I will advise someone to delete a virtual hard disk and I hope you understand the reasoning and wisdom behind this!

  Post edited by: WoodyZ

  I forgot to mention that if you choose to modify the Boot Camp partition.vmx this must be done with closed merger.

• HP Pavilion DV6 6053ea - SSD SATA III HARD disk? & HARD drive space gone?

  Hello

  I have a HP Pavilion DV6 6053ea. It works fairly well, but I think I have an SSD would really speed up the loading of programs and start etc. I'm not so sure that the upgrade. I read on a thread if I had Port SATA 1 6 Gbps Supported or SATA Port 0 6 Gbps then my cell phone was good for SATA III. Is this the case? Joined a program hwinfo32 image, can you check if my phone would support SATA III?

  

  The other issue is my HD. My laptop says I have 750GB HD coming to about 700 GB after formatting. But my laptop seems to have only a total of 350 GB with all sectors added together. Where is the space?

  

  Hello

  Yes, your laptop has 2 ports SATA 6 GB/s (SATA III) most likely the hard drive and an optical drive are connected on it. There are also 2 SATA 3Gbps ports but not in use, I guess.

  The other issue is that there are 4 partitions but the partition 0 is strange and shouldn't be there. There should be a small boot for Windows partition (for BitLocker etc.), drive C: with Windows, D: drive with a partition recovery and partition Tools HP QuickWeb and some diagnostic utilities. It seems that the recovery partition is missing, the C: drive has been decreased and then created a small partition at the beginning of the hard disk. Take a look at disk management in administrative tools in the control panel this partitioning is on the hard drive.

• Satellite Pro A100-622: disk space HARD lower since I use regitry cleaning tool

  I have a Satellite Pro A100-622 with 80 GB hard drive.

  About a week ago, I used a program I downloaded on internet to clearn registry and improve "performance.
  Since my HDD has been gnawed.

  I deleted programs as much as I could, but even before the cleaning, I never used 30 GB max.
  Have done everthing, disk cleanup, and no sooner got a few MBs, they disappear.

  Don't know what to do now.
  Even tried to reformat the drive using the recovery of products of Toshiba, nothing helps.

  Any ideas?

  Hello

  You mean that 30 GB on the HARD disk are available?

  Check the status of the disk in disk management.
  You can see the entire HARD drive and all the available partitions
  Perhaps a partition has been created and the other part of the HARD drive is unallocated space

  But he s strange this recovery disk didn't solve this usually recovery disk format the whole HARD drive and redefines the laptop to factory settings

  Welcome them

• Laptop does not partner Toshiba Stor.E disk external HARD

  Hello

  I just bought a new laptop.
  Pavillion touch screen 14 inches 14-b141sa sleekbook and recognizes the external hard drive, but only in the devices section. It's Windows 8

  I get the following when I try to solve problems. Is there anything else I can do as I have a lot of data on this hard drive

  Thank you

  M

  Hardware and devices
  Publisher details
  Problems found
  USB mass storage device has a driver problem
  Not fixed
  Not fixed
  Reinstall the device driver
  Completed
  Hardware changes may not have been detected
  Detected
  Detected
  Search the recent hardware changes
  Completed
  Potential problems that have been verified
  Update of Windows configured to never install drivers
  There is no question
  Problems found
  Details of detection
  6
  USB mass storage device has a driver problem
  Not fixed
  Not fixed
  There is a problem with the driver for USB Mass Storage Device. The driver must be reinstalled.

  You have a Stor.E HARD USB 3.0 drive partner?
  In this case, you should check if enough power is supplied to the USB HDD.

  Usually the HARD USB 3.0 drive needs about 900 my power. The USB 2.0 port common only provides 500mA.
  So in this case you have to connect the HARD drive to two USB 2.0 ports using a USB Y cable

• Disk failure hard satellite L650-12N - replaced with SSD - how to recover?

  My HARD drive has failed, so I bought a 256 GB SSD Crucial CT256MX100SSD1. I installed it in the laptop and went to use the recovery CD. It's the bit score correctly as far as I can tell, but to cut a long story short, I think that the recovery disk is missing a few vital pieces of information (read below - I may be wrong).

  So, how do for Satellite L650-12N new recovery discs?

  Thank you
  RQ

  After the partition, it then says "copy files of database recovery.
  some random jargon

  Then he said: «unpack the OS and system/WinRE»
  Set of RECO...
  It says "copy F:\ZZImg\11353XSP.swm to V:\HDDRecovery\SWImg 1/10
  1 file (s) copied.
  Copy of the CRC files
  1 file (s) copied.
  Copy F:\ZZImg\11353XSP2.swm to V:\HDDRecovery\SWImg 2/10
  1 file (s) copied.
  Copy of F:\ZZImg\11353XSP3.swm to V:\HDDRecovery\SWImg 3/10
  1 file (s) copied.
  Copy of F:\ZZImg\11353XSP4.swm to V:\HDDRecovery\SWImg 4/10
  1 file (s) copied.
  Copy of F:\ZZImg\11353XSP5.swm V:\HDDRecovery\SWImg 5/10
  1 file (s) copied. »

  at this stage it says ' insert the next recovery media (containing the F:\ZZImg\11353XSP6.swm file)!
  but the backup I did only has one drive.

  Hmm, for me, it seems that some image packages are missing.
  According to your message, the recovery image must contain 10 packs, but the first recovery disc provides only 5 packages.
  Should be so 2nd drive providing other packages to complete the recovery procedure.

  I m wondering if you already used the recovery disc (CD) in the past.
  Are you sure that this recovery disc has been done correctly 100%?

  From my point of few recovery disk is defective and to recover the laptop, you need a good way to return to work.
  Usually this can be ordered here:
  http://backupmedia.Toshiba.EU/landing.aspx

• Disk error hard satellite L50-B-235

  Laptop stopped recognizing Bluetooth, so restarted, but when you start it says something to check a disk and repair the hard disk, which then laptop crashed before completing. Would not start once again, it is:
  1 past age on the toshiba screen then tell no boot device
  2 load the login screen, then past ages in front welcome saying windows preparation and loading a temporary profile. When he made a mistake shows saying Windows detected a hard disk problem. Back up your files to prevent loss of information and then ask the computer manufacturer to determine if you need to repair or replace the disk. It will then crash after 10 to 30 minutes and the blue screen with my critical_process_died error, which restarts always shows described in 1.

  I have Windows (updated 8) 10 and the laptop is less a year. I've tried various searches on google and fixes, including:
  Update of system drive where Windows is is locked
  Check disk either from the start menu or the command prompt in the temporary profile
  Changed the boot order and then back again
  Several reboots
  Open to the top of the unit and removed, then replaced the hard drive

  Nothing worked, I do not have the recovery media and not really means for the moment. This could be a real hard disk problem (it heats up during boot ups) which would mean it needs to be replaced? If Yes is that these can be purchased with Windows installed on it?

  While I update to windows 10 I have a probem with the use of the hard drive because he moved to the use of 100% and the laptop just crashed.

  I search in the Admin Panel and I discovered that I have a service called host system: local system (private network). I tanslate it Spanish which is the language was my laptop.

  Also I have a problem whit the video card because systems always use the graphic istead intel video card (AMD one). I tried to solve this problem in istalling the graphic control of AMD program, but the program doesent work better because the use of the hard drive is always more 100% and the experience of the computer laptop full length.

• Satellite T110-121 - Question about disk and hard drive recovery

  Hello

  I started to use my nice new Satellite T110-12. How can I create a recovery disc?

  Why is there that a common message on the vibration has been detected, HDD head has been moved to a safe position? Is there something wrong? I would return it before the week is up?

  Please answer, thanks a lot a lot!

  Hi LindaMon,

  > How to create a recovery disk?
  What about reading your user manual?
  You need a 8 GB USB key for the creation of a support recovery and preinstalled Toshiba Recovery Disk Creator.

  > head drive has been moved to a safe position?
  Yes, that's normal and everything is ok with your laptop. Your HARD drive will be protected by HDD/SSD Alert utility which is a nice feature of Toshiba to avoid accidents of the head and can improve the lives of the internal HARD disk.
  But yoou can disable these notifications if you want. ;)

• Disk replacement HARD satellite 1800-400,

  Prices differ as much here, so I think to replace my broken HD Toshiba (I believe that is / was 20 GB) with a new HD. Can I use one of the new 5400 RPM type disks, or if I hold with 4200 RPM normal ones?

  If I do, should I first replace the old BIOS?

  Maybe you need to consider the noiselevel to a 5400 RPM hard drive?

  Update the BIOS? ... Never change a running system ;)

• I can't boot from disk external HARD - Tecra M5

  Hey guys,.

  I tried to start my Tecra M5 from disc external HARD with a clone of my hard drive but it does not work.

  Maybe you can give me some advice for this problem.

  with greetings

  Hello

  > Maybe you can give me some advice for this problem.
  This isn't a problem! It's just not possible!
  Regarding a I know that it of not possible to boot from the external USB HDD

  You can boot from these devices:
  USB FDD, disk HARD primary, SelectBay devices, Network (LAN), SD-CARD

  Good bye

• Disk replacement HARD Qosmio F60-111

  Hello

  There was a hardware error in my laptop and the dealer told me that there is an error with a hard drive and it will be replaced under warranty.

  My question is that is that the new drive will come with the same configuration and the score of the original hard drive? I mean that it will be a breast hidden restore partition?

  My laptop is Qosmio F60-111

  Concerning

  > My question is that is that the new drive will come with the same configuration and the score of the original hard drive? I mean that it will be a breast hidden restore partition?

  The new drive HARD would not be partitioned and contain all the data!
  After replacing HARD drive, you must use the recovery disk in order to install the system, the drivers, tools and for the partitioned HARD drive.

  Did you create a recovery disk in the past?