Disks in the system for Vista

Similar Questions

• How to change the system from Vista Home Premium to Vista Ultimate 64 withoute lose the option of HARD drive backup?

  IM now running Vista Home Premium 32. I would like to change the system for Vista Ultimate 64 so I can run more than 4 GB of memory. Now Ive some factory settings if something happened, I can run my HARD drive restore. My question is how to change the Vista 64 operating system, so I can keep the recovery on my hard drive partition?  Mayby there is some kind of upgrade cd?

  Thank you

  Hello

  32-bit to 64-bit is not an upgrade

  It must be done with a clean installation using a full version ' / Ultimate 64 bit license

  Contact the manufacturer of your computer for more information on getting 64-bit ultimate, which I doubt they will always

  and microsoft sells more vista

  they moved on windows 7

  and you are supposed to make this partition recovery disks to reinstall vista

  ask the manufacturer of the computer how to

• How can I repair the registry system for Vista Ultimate 32-bit.

  How can I repair the registry for Vista Ultimate 32-bit system, is a tool of the recommended tool to do this, because all the third-party software that claims to do this is not worth the money they charge. I was infected with the vista security 2012 the virus. I was able to restore some of the registry entries through Microsoft help forums. com But here's my problem, registry entries to the windows firewall and the Defender disappeared completely and there's probally that I don't know everything yet. I prefer not to do a fresh install of the operating system if I can avoid it. I'm currently only essentials of security installed on my desktop and have run the Microsoft - 1.0.30010 security scanner, also, I ran malware bytes, but like I said my registry has been corrupted by the virus and must be repaired.

  Hello

  You are welcome.

  Before considering the upgrade to Windows 7, there are a lot of things to consider.

  See if Dell has Windows 7 drivers for your model computer.

  http://www.Dell.com/support/drivers/us/en/19/DriversHome/NeedProductSelection

  Download and run the Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/download/en/details.aspx?ID=20

  And also to use the Windows 7 Compatibility Center.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  To your original problem, you can try this scan:

  "How to use the System File Checker tool to fix the files on system missing or corrupted on Windows Vista or Windows 7"

  http://support.Microsoft.com/kb/929833

  The only problem is that it do not work if you have serious problems of file system.

  That's when you need Installion repair to fix things with a Microsoft DVD as above or replace the files, but you still need this DVD. Catch 22!

  Try it and see how you go with it.

  See you soon.

• Satellite P100-437: change the system from Vista to XP

  I am currently running vista on my laptop. I want to change the system for windows xp and I can't find the drivers.

  Pls help

  Hello

  Satellite P100-437 is a part of the PSPAGE series
  If you want to download the drivers, you must choose this serial number.
  I found the XP drivers for this laptop on the page of Toshiba Europe

  Check it again Buddy :)!

• Is no longer, I can download and install the updates for Vista SP2. I get error 80070490

  Original title: Windows of Vista SP2 update fails.  Vista Upgrade option grayed out

  Is no longer, I can download and install the updates for Vista SP2.  I get error 80070490, who reports that Vista Service Pack 1 is no longer up-to-date.  I downloaded and installed the "System Update Readiness Tool" without change in error.  Repair Vista with DVD does not give me the upgrade option.  My SP-2 is corrupt?  Vista Service Pack 2 also went out of support?

  Kind regards

  Ed S.

  Hello

  Method 1:

  Follow the steps in troubleshooting section and check if that helps.

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates

  http://support.Microsoft.com/kb/958044

  Method 2:

  You can also read this article and check if it helps.

  How to uninstall Windows Vista service packs as a troubleshooting step

  http://support.Microsoft.com/kb/948537

• Silverlight doesn't run - 'lack of some components of the system for the automatic updates'

  I just installed Silverlight, but when I tried it, the next run messageappeared 'Lack of some components of the system for the automatic updates'. I logged on the microsoft page, but here I didn't know what to do?

  Thanks for your help.
  Rose

  Hi RoseMaryInes,

  The question you have posted is related to Silverlight and would be better suited in the Silverlight forums:

  http://forums.Silverlight.NET/forums/

  Please visit this link to find a community that will support what ask you

  Thank you for visiting the Microsoft answers community.

• How can I perform a recovery of the system for a mini HP?

  Original title: System Recovery.

  How can I perform a recovery of the system for a hp mini?

  Hi waynemeyer,.

  1. why you want to make a system restore?

  2. you have a question about your computer?

  3. you have installed on your computer Recovery Console?

  If you try to restore the factory settings, you will need to contact the manufacturer of the computer for help.

  Contact HP

  Hope the helps of information.
  Please post back and we do know.

• I need to install the SP1 for Vista, but get message at the stage of installing "updates are not configured correctly. Change back '

  I need to install the SP1 for vista before SP2 for vista in order to use 2012 TrendMicro internet security. Thanks in advance

  Original title: Hi can someone help me please.  I need to install the SP1 for vista, but get this message at the stage of installing "updates are not configured correctly. How can change recovery"I fix

  I understand that you now have returned back to factory settings and have installed all updates except for service packs.

  .

  You will need to install the required service packs-

  How to get the latest Vista Service Pack
  http://support.Microsoft.com/kb/935791

  Windows Vista and Windows Server 2008 service Pack is not available for installation via Windows Update
  http://support.Microsoft.com/kb/948343

  You will need to install SP1 before installing Sp2.

  Once your computer is up to date, then you can think of Windows 7

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  I can't help you with the trend, but from memory, you must allow it's Installer to download to facilitate the download and installation etc.

• Failure of the system for Windows 8 image backup

  I downloaded Windows 8 a few days ago. I tried to create a system image to an external drive, Western Digital 500 GB (409 GB free) four times and each time after a few minutes a message said that the backup failed. The backup of the recovery Partition seems end OK every time. The failures occurred after a minute or two in the backup of the C: drive of the OS.

  The external hard drive checked OK. The player has already had an image of the system for Windows 7 which was removed before the backup attempt. Here are 2 messages I received as the backup failed. The other 2 were much the same, I think.

  "There was a failure in the preparation of the backup image of any of the volumes in the backup set. (0X807800C).
  The mounted backup volume is inaccessible. Try the operation again. (0X8078004F)."

  "There was a failure in the preparation of the backup image of any of the volumes in the backup set. (0X807800C).
  The specified drive is not found. (0 X 80780081)"

  Below are the 2 files on the external hard drive after the failure. I guess that the first was the complete recovery Partition backup. I don't know much about this sort of thing.

  7da23344-ab79-11e1-887d-806e6f6e6963.vhdx - 7.61 GB
  7da23345-ab79-11e1-887d-806e6f6e6963.vhdx - 7.00 MB

  Anyone have any ideas on the problem? The software only virus on the PC is Windows Defender that came with the operating system.

  Fifth time is a charm, I suppose. I tried saving image system for the fifth time and successfully completed this time. Nothing has changed on my system or readers.

• Best practices for storing the Logs of the system for all newly improved ESXi hosts?

  Hi people,

  What are the options and best practices for the Logs of the system for all newly improved 5.1u1 ESXi hosts?

  Do I need to have the Syslog server or it can be safely ignored?

  Thank you

  Evening,

  Syslog is preferred, but VMware has provided a collector of syslog on the vcenter installation disc can be installed on any windows host or your vcenter. I can't count the number of times where I had guests CMTF or newspapers lost... Fortunately for the syslog which collects up to the accident.  It is not necessary, but it's really a good idea without any real cost since you can use your vcenter host.

  Here is an article on how to install it:

  Set up Syslog ESXi collector | VMware vSphere Blog - VMware Blogs

  Thank you

• I signed up for 30 day trial and I just got a notification if the trial ended. I did not use the system for more than 30 minutes.

  I signed up for a 30 day trial and I just got a notification if the trial ended. I did not use the system for more than 30 minutes.

  http://helpx.Adobe.com/x-productkb/global/trial-software-expired-early.html

• get the 0x400110020000100b error code while making the recovery of the system for windows vista 32 bit.

  I tried to do a system restore on my laptop using the included recovery disks and had this error 0x400110020000100B. The drive looked pretty beaten last week so I ordered a new series. Now, when I got to put disc 2 in (to 80% full) I get the same error.  I called customer service and he took me through the process of F9, nothing works and I also tried the F11 approach that made me not the case.  I'm frustrated because I don't really have the money for a new laptop computer.

  Laptop is a HP Pavilion DV6700.

  Any help would appreciated more than you know.

  The system is Windows Vista 32 bit

  The guy on the phone said ' well, you know it's a pretty old computer... Thank you gee...

  Hello:

  See if you can make your own Vista installation disc if you can read the product key 25 character on the bottom of your laptop.

  Here's how:

  If you are in a fault light but rewarding you can do yourself if you can read your product key of Vista on the PC of 25 characters.

  You just download the 3 files you need on the link below and read all the instructions to create a Setup bootable DVD disk using imageburn.

  Do not take into account the part of the text in the first screen shot about "extract the files in the folder of Vista."

  The files were extracted already in this folder when you ran the X14.exe file by reading the text on top of the first screenshot.

  The other thing I noticed is on the 4th page, where it shows Developer ID Microsoft Corporation. I had to type Microsoft Corporation in me, and then other codes already filled in.

  When I went to compile the ISO file, ImageBurn gave a message on a WIM file, file and ISO, and if I wanted to burn it in a different format.

  I selected no, make the ISO file.

  It was not so hard to do. I burned both the disk of 64-bit and 32-bit disk in case I ever need them.

  I tested both of them one my hp dc7100 CMT desktop PC, worked flawlessly.

  When you enter the product key, he knows which version of Vista you have.

  http://en.community.Dell.com/support-forums/software-OS/w/microsoft_os/3317.2-3-Microsoft-Windows-v...

  After you install Vista successfully, you can then install the drivers for your PC and driver page support.

  Paul

• Trying to create the recovery for Vista, error message disk on scriptlibrary.dat

  try to create a recovery disc for vista, cannot that a window pops up with the following.

  ScriptLibrary.dat

  cannot be varified for digital certificates, automation server can't create object

  Help, please

  Hi Michael,

  You're talking about recovery disk from the manufacturer created from the computer recovery partitiion or are you talking about a generic recovery for repairs disk (making it impossible to reinstall the operating system)?

  If the recovery disk from the manufacturer, please contact technical support from the manufacturer for assistance that the process of creating a disk of the partition recovery is their process and not Microsoft and varies by manufacturer and sometimes even my computer within this manufacturer model.  We do not know how to deal with each type or how to handle a problem such as you experience with this process - even if we knew that the manufacturer make and model specific to computer which you did not (but with which we might be able to provide specific links to the manufacturer).

  If you mean a recovery for the repair disk, then try using the following to do an and see if it works any better than any method that you use: http://www.vistax64.com/tutorials/141820-create-recovery-disc.html.

  I hope this helps.

  Good luck!

• How to create a disk to restore the system to Vista Home x 64 sp2?

  I want to create a disk to restore the system to the x 64 Vista Home sp2.  How can I do this?

  Hello

  Contact the manufacturer of the computer

  It's their recovery process, not Microsofts

• How can I do a restore of the system for five days in Vista

  My pc has become unstable and I tried to do a system restore, but cannot go further then five days > desperately need help.

  Hello

  Please read Section 4 check the box to restore more than Points 5 days:

  http://pcsupport.about.com/od/fixtheproblem/HT/system-restore-Vista.htm

  See you soon.