disorders afer resettlement T500

Similar Questions

• T500 takes forever to stop

  Hello

  I have a laptop (Thinkpad 2082.BSG) T500, and recently, I had to repair after that the stettings of the factory have been resettled. However, for some reason it now takes a lot of time to stop (sometimes 10 minutes). I received advice that I probably should disable some services. But what services? Can someone help me?

  Kind regards

  bostjanv

  Hello

  Thanks for all the tips. It seems that the problem has disappeared after uninstalling the Access Connections software (although I can't imagine how that would have helped).

  Best regards

  bostjanv

• iPhone does not recognize the resettlement of the iPhone Apple ID

  My sisters iPhone 6 was blocked as it tried to enter his PIN code for too many times.

  I tried to re - install the iPhone through iTunes.

  Resettlement, the iPhone asked Apple ID

  Because she did not know the password, I used recovery password Apple and its Apple ID works again...

  But the iPhone says its connected to another apple (b***@icloud.com) ID.

  When I enter the Apple ID and password recovered, it does not.

  In other forums, there are similar problems when the phone is connected to "find my iPhone", but when I get his Apple ID in iCloud i(turned off) phone is not connected to "find my iPhone".

  I'm out of options here.

  She owns an iPhone 6 but it is unusable because of security concerns.

  Do you recognize the email address @iCloud.com? Did you sign in iCloud by using this address?

  GB

• I lost the icons associated with my favorites. I tried to restart my Mac, Safari, resettlement and Add-ons suggested in other forums without success. Is there a way to fix this?

  I lost the icons associated with my favorites. I tried to restart my Mac, Safari, resettlement and Add-ons suggested in other forums without success. Is there a way to fix this?

  Hi rmmilleriii,

  You should take a look at this article which discusses some of the problems with the latest version of Firefox.

  There is some information here that should help you solve your problem. Fortunately, this is a very easy solution.

  Hope this helps!

• Satellite Pro L450D - 12 X - disk to perform a resettlement system

  Hi, I wonder if anyone can help.

  Our laptop does not come with a disc to perform a reinstallation of the system, I checked the pc for a partition with the resettlement program, but it seems not to be.

  Basically, I was wondering if I can download it somewhere?

  Thanks in advance

  Mike

  Hi, Mike Price,.

  You can download t this software, but you can create a Toshiba Recovery disk that contains an image of the factory settings. So, you can restore the original every time settings. You can create this disk preinstalled use Toshiba recovery media creator. Therefore, you need a few blank DVDs to create disks, just follow the instructions on the screen. It's pretty easy.

  An alternative, you can also reinstall Windows using the recovery disk feature. This is described in your user manual and also how to create the recovery disks.

  With Toshiba Recovery disk, you're safe side because you are able to restore the original settings each time you install another OS or change the HARD drive.

  Normally in the first start of the laptop (after purchase) you should received the following recovery reminder message:
  + Important INFORMATION +.

  + your system is equipped with a hard drive recovery system. If you need repair.
  + your computer in the restaurant to original factory State, you can do it directly.
  + HDD (press F8 when you start your computer, choose "Repair your computer" +)
  + and follow the instructions in the menu) or create a media drive bootable recovery to that end. +.

  + Toshiba recommends you create recovery disk medium uses the "Toshiba Recovery Disc Creator' to ensure the +.
  + Hat you are able to restore your computer to the State of origin, installed at the factory, even if your computer +.
  + Gets severely damaged.

• Satellite T500 - how to use HD TV?

  Hello

  I just bought the Satellite T500.
  I was told I could just plug the antenna and it would work, but when I click on HDMI output icon I get the msg "it is only effective when the pc is connected to a TV set that supports HDMI control via the HDMI cable.

  Does this mean that I have to do something else in order to make it work?
  Would be grateful of any advice.

  Thank you

  T500 satellite does not for me
  What cell phone do you have exactly?

  I recommend checking and reading the manual first!
  I think if you pressed the button that displays the screen of the TV that could be connected to the computer via a HDMI TV cable!

  For example, you can watch DVDs on the external TV

• T400/T500: Horizontal USB ports are there?

  Are there only vertical on the T400 and T500 USB ports?

  I think that the current T61 and R61 have ports usb place management, having 3 vertical usb ports are cramped on one side makes life a bit difficult for people with usb accessories oversized.

• Thermal management T500

  I have a T500 with P8400 and integrated graphics. Even if the laptop is almost always cold (and besides I use Thermaltake fanless cooling pad ixsoft) fan is almost always lit (Everest indicates that, even with the kernel time about 30 C). The fan is only triggered when it is rather cold (17th century) in the room (using the profile of energy of maximum battery life).

  This behavior is ok?

  What is the threshold temperature to start the fan?

  How can I change the thermal management? (I tried BIOS and ThinkVantage power management)

  Hello

  Try the small program fancontrol.

  or Tpfancontrol of Troubadix.

  If all goes well, it works on the latest systems of T.

  Concerning

  Andreas

• T500 - how to change discrete ATI graphics card?

  I can't work on how to spend my (ok my wife!) T500 to use the ATI graphics card. Everything I read says do a right click on the battery icon, and then select "maximum performance" or words to that effect. So I did. Then what? It is still using the Intel chipset, even after a reboot. Is there something I'm missing or not to see?

  Thank you

  I installed updates some time ago and the problem has been corrected. Not very impressed it worked not out of the box.

• T500 Will work with 62P 4551 Mini Doc

  We replace a number of T40s with T500s. The Docs of Mini 62P 4551 we use with the T40s will work with the T500s and if so, are there restrictions?

  Thanks - I thought that this might be the case.

• T500 SSD Samsung Evo 840

  Hello

  I've had a T500 laptop for about 4.5 years now and I'm looking to replace my HARD drive. I'm afraid that happens at the end of its service life. I'm looking to replace it with an SSD - especially a Samsung 840 EVO (MZ-7TE250BW). I am aware that I won't speed SATA III (seems to be SATA I or possibly II - even then it will still be an improvement from my HARD drive).

  From what I found, the T500 has a drive Bay 2.5 "9.5 mm. However, the EVO 840 is 2.5 "7.0 mm. So my question is this - can be PLOPPED in the SSD to replace the HARD drive, or is there some necessary adapter kit? The player would need a different box / rails? Obviously 7.0 mm would fit, but I don't know if the screws / connectors were queuing and if something would be needed to fill the extra space to make the drive safer. There are a bunch of EVO 840 which comes with a 'portable' kit but I don't know if it works in my T500.

  Thank you

  Mark

  Welcome to the forum!

  I have installed a number of 7mm SSD using the standard a 9mm HARD drive caddy/rails. Have not yet tested the EVO, but I do not think that you will have problems here.

  Happy update.

• T500 completely scrambled discrete graphics

  My T500 has developed a serious problem with the video of the graphic interface is completely corrupt.

  I tried on the features of dual screen with my L170p monitor. As I used it, I noticed a video corruption, particularly on applications slipped between the views. Finally, I decided that it is not really me anyway, and so I minimized the 2 display resolution (800 x 600) and disabled the option "extend my Windows desktop on this monitor.

  However, corruption has continued and I decided to restart it. However, before I could, the machine gave a BSOD that was mostly unreadable. Reboot, the Windows XP splash screen was also altered; I tried to use the Fn + F7 to switch to the external display, but it was no better. Try to connect fingerprint BSOD machine'ed - this text is unreadable, but I saw the word '' parity '' in there. From this point, it went from bad to worse. Connect the external display and try to get the BIOS with the F1 to the ignition, I could see a text there, but it is mostly illegible and overlapping with lots of video noise and the vertical bars cyan, flashing boxes of all colors, etc..

  Somehow, I managed to do enough to get the BIOS to switch to the built-in graphics card and was able to boot Windows and install the Intel graphics driver, so the machine is little functional again.

  However, go back to "discrete graphics" gives the same problem: no video on the internal LCD screen, only scrambled on the external monitor. If I allow Windows to start with discrete graphics, TI BSOD with an unreadable screen for the most part, but it seems to speak to shut down Windows to avoid damaging the material and the word 'conflict' is here, too.

  Configuration: T500 type 2081-CTO, 4 GB RAM, Windows XP SP 3, fully updated with drivers

  Display of the BIOS settings (all other settings are default):

  Main default video device: internal

  Initializing display: Thinkpad LCD

  : Initially graphics discrete graphics, now integrated Graphics

  OS detection for switchable graphics: disabled

  I wondered if the bi-ecrans mapped configuration somehow ATI video RAM so that it comes into conflict with the top of that 4 GB of RAM. Remove a 2 GB DIMM has not helped. However, once the machine has restarted successfully with Windows, the ATI driver has not been loaded (as the discreet graphics card has been disabled) and so perhaps all that has been mapped has not been not mapped? However, I expect memory graphic mapping be reset to zero at the start anyway. And since the video is so completely that screwed up at startup, it is resembling more a permanent hardware failure, in which case the machine back under warranty.

  Are there any other suggestions on how to proceed?

  Best regards

  -The

  The machine came back last Friday - the technology has replaced the video chip, as well as the keyboard, for some reason any. He had also installed Vista x 64; I tried to learn to love it, I really have, but after a few days, I have decided that the benefits outweigh the problems of compatibility, I got with my (admittedly old) version of Lotus Notes. So I reinstalled XP Pro and everything is now back to normal - although I'm not willing to try the external chart again on this machine.

  Best,

  -The

• T500 and Win 7

  I'm curious to know if/when Lenovo T500 will begin to support ThinkVantage applications on the platform of Win 7?

  I was wondering which application you want to say. 99% of recently published applications are works perfectly with the T500. For me only the scanner digital (I think it's my fault) and function of graphics card switch (catalyst 9.4 modded works almost, just crashes )

  Surprisingly, use native/programs Vista drivers, most of them works. 7 specific updates can be found on: http://www.lenovo.com/windows7beta

• Installing Windows 10 on T500, Windows 7 migration

  During the installation of 10 window, a message appears that the media required driver is missing (DVD, USB or fixed disk). Looking for the driver, I find an ovierview, saying that W10 does not work on T500. Is this correct?

  -Otherwise, where I can download the required drivers?

  -Si W10 does not work on T500, how can I go back to Windows 7? No possibility to continue more away from this error message.

  Thread can be closed, because I finally managed to restart Windows 7. Thanks to all the volunteers, think of a solution for my problem as specified above.

  Just for your information: the text of detailed explanation for my readings of problem window-10:

  0 x 1900101-0x3000D

  The installation was not successful. In the FIRST STARTING phase, an error occurred during the process of MIGRATION-DATA.

  Whatever that means, it does not increase my confidence in W - 10.

• T500 Hybrid Graphics problem - how to blindly with Intel card

  I bought a Lenovo T500 with a faulty ATI card that worked perfectly with disabled switchable graphics. Unfortunately for some stupid reason, I decided to test the ATI card and enabled feature switchable graphics in the BIOS. Now, the laptop starts with a black screen (internal / external) and I can't go to the option to disable the feature of the hybrid. Is there a way to re - put the BiOS settings so that I can use the graphics card intel?

  I tried to remove the bios battery, hoping it would issue zero CMOS but this resulted in a series of additional beeps and not much.

  Any help will be greatly appreciated.