iPhone does not recognize the resettlement of the iPhone Apple ID

Similar Questions

• First does not recognize the mov-apple intermediate codec-clips

  I had a few mov Apple intermediate codec-clips on my calendar in a project that I use every day. Today the clips suddenly became "Media disconnected". When I reconnect, in the preview of the monitor there is no video, only audio.

  Thank you, Christophe.

  Also, I noticed that I had an update of Yosemite about video codecs; I did and now it all works again. It is always something strange, because I installed yosemite more than a month ago and I never had this problem until now.

  Good day

  Ruggero

• Apple TV does not recognize the Apple wireless keyboard

  My Apple TV (4th generation) does not recognize the wireless Apple keyboard I want to make a pairing.  All my other devices (Mac, iPhone and iPad) recognize the keyboard.  This should be done automatically on the Apple TV, but it's not.  The Apple TV has acknowledged the Apple TV remote and paired with her.  Any help would be appreciated.

  Thank you

  Ken Templin

  I paired a non-Apple clone keyboard and it was somewhat capricious. You go to the remote controls and devices-> Bluetooth, enable matching on the keyboard, and it should appear in 'other devices '. You select and enter the number to validate. It requires no tvOS 9.2.

• Someone at - he had problems with 9.2.1 and pairing Bluetooth devices?  My iPhone will not be connected or pair of devices.  Devices to recognize the iPhone 6, but the will of the iPhone 6 does not recognize the device.  Is there a problem with 9.2.1?

  Someone at - he had problems with 9.2.1 and pairing Bluetooth devices?  My iPhone will not be connected or pair of devices.  Devices to recognize the iPhone 6, but the will of the iPhone 6 does not recognize the device.  Is there a problem with 9.2.1?

  Kev2012 wrote:

  Someone at - he had problems with 9.2.1 and pairing Bluetooth devices?  My iPhone will not be connected or pair of devices.  Devices to recognize the iPhone 6, but the will of the iPhone 6 does not recognize the device.  Is there a problem with 9.2.1?

  It would depend on what you're trying to link to?

  Here are the supported Bluetooth profiles an Apple device can connect to iOS: Bluetooth profiles supported - Apple Support

• Hello! I restored my iPhone 5 because IOS 9.2 does not work well, and now the IPhone does not recognize the SIM CARD ☹️ please someone help me! What can I do?

  Hello!! Recently, I have restored my iPhone 5 because IOS 9.2 does not work well. But now my iPhone does not recognize the SIM CARD.

  I Don' t know what to do, help me please

  You get an error message?

  What did he say?

• ITunes does not recognize the phone

  IPhone SE, Windows 10, update ITunes, McAfee

  Connect the phone to the computer and the window phone company recognizes the phone immediately.  I close the phone company of the window and open ITunes.  ITunes does not recognize the phone.  I have the menu bar, select file > currencies, all the options are greyed out.

  Disable McAfee, and then try again.

• HP Solution Center does not recognize the network printer

  Network has a hp 309 a printer, can print from the computer, the problem is:

  HP Solution Center not load-says incomplete installation.  If I plug in the USB cable and let it continue, it sets up a second printer that only works on the USB cable and it still does not recognize the network printer.

  Question how can I get the Hp solution program to reward the network printer.  If I reload the CD, then reinstall the will other people on the network of the problems?

  Resettlement on your machine won't affect only you, no other machines on the network.

• BlackBerry Q10 Q10 does not recognize the sender of sms

  I have a big problem.

  My Q10 is recognize my contact when I am called, but does not recognize the sender of the text message when I get one.

  Let me explain.

  I'm from Romania. The prefix for my country + 40 TR.

  Our mobile numbers starting with 07XX.XXX.XXX

  When you call from another country you put only + 40 then the number of laptop without the 0 (+ 407XX.XXX.XXX)

  In our country are 4 mobile operators (Vodafone, Orange, Cosmote and Digi).

  There is a situation when if you are called to another network, the number makes an appearance with the prefix of the country as + 407XX.XXX.XXX and my Q10 recognizes not the same if the appellant, it is in my contact list.

  Today, I noticed another BIG PROBLEM.

  So, I have in my contacts... John Smith with 0722.123.456.

  When I am called by him, it apears John Smith, but when I recive text message from him, it apears + 40722.123.456.

  My stupid Q10 does not recognize the contact!

  If I change the number on my agenda and I put + 40722.123.456 to John Smith, he acknowledged the sender of text, but it does not recognize the appellant (when I get a call from John Smith), it apears 0722.123.456.

  I used a lot of o phones: Nokia (many models), Iphone, Siemens, Samsung, etc, since 1996.

  I NEVER HAD THIS PROBLEM UNTIL TODAY!

  EVEN WITH THE OLD MODELS AND STUPID OF NOKIA!

  I CAN'T BELIEVE THAT THE NEWEST SMARTPHONE ON THE MARKET HAS THIS BUG!

  I HOPE THAT SOMEONE WILL ANSWER ME SOON AND GIVE ME A SOLUTION!

  P.S. the next week, I'll go on a hollyday in another country. What happens when I receive the call of my country and all my calls will be with prefix + 40?

  Probably, he recognizes no contact!

  You have this problem or if only my phone?

  The work-around, I have read other users is to include the number of the contact in two formats...

  Thus, John Smith would have one number registered with 40 +, and other registered without the + 40.

  BlackBerry is aware of the issue and I hope to work on it.

• Power mac g4 does not recognize the DVD/CD drive.  It has worked very well in Leapard

  I just newly installed Tiger on my PowerMac G4, and now it does not recognize the DVD/CD drive.  I did all the updates and it does not see the DVD in the DVD drive.  It works perfectly before a new clean install DVD of the Tiger.

  What is your indication that the DVD is not recognized?

  Run the utility disc with the disc in the optical drive.  The drive will appear in the sidebar of disk utility?

  I did all the updates and it does not see the DVD in the DVD drive.

  If you put another type of disc in the optical drive, as a music CD, it is recognized?

• I uninstalled flash on my mac now youtube videos will not play. the error says safari does not recognize the video formats available.

  I uninstalled flash on my mac now youtube videos will not play.

  the error says safari does not recognize the video formats available.

  Reinstall the Flash Player... Why did you remove it?

  Barry

• I have a My Passport to the top by car and I get error messages on this to be ejected (although it was still connected). Now my computer does not recognize the drive. All solutions?

  I have a My Passport to the top by car and I get error messages on this to be ejected (although it was still connected). Now my computer does not recognize the drive. All solutions?

  Drive, interface in the crankcase of training controller, or the USB port or the cable may be faulty.

• Siri does not recognize the voice.

  My Apple TV remote Siri works fine, but only of Siri does not recognize the voice. I just bought last month. No gross State aid.

  Are you pressing the button of Siri (micro) when you talk?

  Have you enabled Siri in settings > general > Siri?

  If so, then try a reset by unplugging the power cord for 30 seconds.

• Satellite M50-A-110 does not recognize the new SSD?

  Hello

  I bought the M50-A-110 model and tried to replace the HARD drive by a Pro 840 Samsung SSD. The laptop does not recognize the SSD drive, so I sent him to the local Toshiba service for inspection.

  They discovered that the laptop does not recognize ALL of the latest SSD (they tried to Samsun, Intel, Crucial, Kingston and SSD Seagate). They checked, and I possible newer BIOS, so this isn't a problem, and the SSD worked fine on other computers.

  Someone knows how to solve this mess?
  Toshiba has a BIOS beta I could try?
  Any other ideas would be welcome.

  As a user of long date Toshiba, I must say that I am a little disappointed. I mean I work in it, and this is the first time that something like this happened to me with a new product.

  Hello

  I can't believe that Satellite M50 - A can not handle any of the mentioned SSDS.

  I upgraded my Toshiba laptop with SSD Pro 840. But before I did, the update of the firmware of SSD was necessary. Before the firmware update, the SSD has failed, after the firmware update, BIOS can handle the SSD.

  I would recommend to check the SSD for the firmware update!

• Does not recognize the external HDD PH3100U-1EXB

  Here's my problem...
  I unplugged my hardrive ex the other night and he fell about 2 feet. Today, when I plugged in again, the computer does not recognize the device. I get the message "disk or network connection that the shortcut, Toshiba - HDD is unavailabale.»

  Ive tried to plug it into different usb ports without success. The worst thing is that ALL my photos are there, is there a way to recover the them.or I'm screwed?

  You can test it on another PC or laptop?
  Just to be sure it is not somehow connected to your PC at home.

• Satellite C650 - 1 CT does not recognize the CD/DVD

  Hello

  I currently have a problem with my model Toshiba C650 - 1 CT (PSC08E-03M001EN) satellite. The laptop does not recognize the CD/DVD and a check in the "Device Manager", said a damaged device driver!

  Now, my problem is that I searched on the internet and also on the websites of Toshiba for the right driver, but no use. The device (DVD) opctical no not also appears in the list of devices 'removable '.

  System details:

  Satellite C650-1 CT PSC08E-03M001EN
  OS: Windows 7 64-bit
  Place/country: United Kingdom

  Assistance in finding the right driver or advice how to solve the problem will be highly appreciated.

  Thank you
  Lamin

  Post edited by: jammehkunda

  As first step try please remove the optical disc drive from Device Manager and restart your laptop.
  After doing this review please the Device Manager and let us know if the problem persists.

• Portege R700 - Autocad 2011 does not recognize the graphics card

  Hello

  I have toshiba Portege R700 with 64-bit win 7 installed.
  I need the computer for use with autocad 2011.

  For some reason any auocad does not recognize the graphics card installed on the computer.
  I suspect it because very little memory is allocated for the graphics card.

  How can I change with the memory allocated for the graphics card, or perhaps, can someone show me where can I find a driver that supports autocad.

  Thank you very much!

  Hello

  What Portege R700-xxx you have exactly?
  As far as I know the graphics memory cannot be assigned manually.
  Everything is controlled by the graphics driver and you have no influence on this

  You can try updating the graphics card driver maybe it would help.
  The most recent driver found on the page of the European driver Toshiba
  If not, you should check the manufacturer of the graphics chip driver

  Good luck