Display does not.

Similar Questions

• Equium A300D - 16 c - display does not

  My girlfriend has an Equium A300D - 16 c which had some problems lately.

  In recent months, whenever she turns on the system, the display does not pull upwards and it takes several tent for lights.

  The strange thing is every time that happens, the system boots normally always that you can hear the Windows 7 startup sound.

  I'm looking for in this question for some time now and I'm running out of ideas.
  Initially, I thought that it could be a wiring problem but by stripping the laptop down, I found that the cable was still firmly in place.

  I also tried to remove the RAM, HARD drive and DVD drive, but it still doesn't pull upward. On the odd occasion she started upward when you do it, but after restart, it has not started again.

  I think that this could be either a transmitting power or the mother board is on its way. This problem has worsened gradually (it took more than 20 attempts it turn on and off this morning) so finally he come not at all.

  To clarify, the system will start after several attempts, but most of the time that the screen not turn on (not even the backlight). It works with an external display on the HDMI so the GPU works.
  I tried to keep the power with no energy source button to unload the system, but it does not help.

  I also noticed that if you hear it boot and close the cover, the reopening of the display lid will come on but with the bad (1024 x 768) resolution that has intrigued me even more.

  Any ideas on what could be the problem? I would repair it rather than just buying a new as its still a decent system apart from this problem.

  > To clarify, the system will start after several attempts, but most of the time that the screen not turn on (not even the backlight). It works with an external display on the HDMI so the GPU works.

  This means that you can use the laptop as part of the external screen, but it does not work with the internal screen?

  This means that the internal display module isn't OK. It probably needs to be replaced.
  But this does not explain the problems while turning on the laptop.

  In the worst case the mother for laptop AND the internal screen are affected, but it would be really strange and rare bad luck

• updated my iPad to 9.3 air activate iPad display does not not my account information, but the Mac computer accepts my Apple ID and password

  updated my iPad to 9.3 air activate iPad display does not not my account information, but the Mac computer accepts my Apple ID and password

  A lot of people is affected by this problem, and Apple has worked on the issue.  Some found the following steps useful for this issue:

  Go to iCloud.com and select settings once you are connected.  Click on your device listed there and remove them from the account (not typing not erase or lost mode).  Restart your device and must ignore this lock of Activation screen because you actually disabled the lock by removing the device for iCloud.com

  I hope that helps!

• Download StarWar 6 pack - I get "movie will play not display does not support HDCP" I have a MacBook Pro '11 '.

  How to play movie with HDCP?   What is it?  Why he won't play on MacBook Pro 2011?

  Hello TheBell,

  Thank you for using communities of Apple Support.

  I see you found a mistake that "movie will not play, the display does not support HDCP" error when you try to play a movie downloaded on iTunes. I have a couple of things I would like that you try to refine the question.

  First, start your computer in safe mode and test the question.

  Try safe mode if your Mac does not end commissioning

  If after the test in safe mode, the issue is still in progress, and then create a new user and test in the new user.

  OS X Yosemite: set up users on your Mac.

  If you still have questions, additional information would be useful. Using an external monitor? If so, test with just the internal display on the MacBook Pro. All the other things you notice?

  Best regards.

• Thunderbolt 10 Windows display does not work

  Hello

  I'm trying to implement the following configuration:

  I have 2 Macs:

  • Mac Mini (late 2014, 2.6 GHz Intel Core i5;) Intel Iris 5100 1536 MB) with Windows 10 (Home) installed through Boot Camp
  • 27 "iMac (late 2013; 3.5 GHz Intel Core i7;) NVIDIA GeForce GTX 780 M 4 GB) installed with OS X El Capitan

  I want to use the iMac as a display for the Mac mini, but it seems that thunderbolt display does not work (I can not upgrade to Windows 10 by pressing Cmd + F2)

  Could you please help to solve this problem?

  Kind regards

  Dmitry

  Please see use of your iMac as a display with the target - Apple Support Display Mode and Thunderbolt Firmware Update 1.2: continues to reappear and ports Thunderbolt and the target Display Mode may not work - Apple Su... .

  If command-F2 does not work

  If your iMac won't go to the target Display Mode when you press Control-F2, check these things:

  • Make sure the iMac that you try to use it as a screen that supports target Display Mode.
  • Make sure you are pressing Control-F2 on the keyboard which is connected to the iMac to use as a screen.
  • In the keyboard system preferences, if the check box is enabled to use all F1, F2, keys etc. as standard features, changes of command-Fn-F2 key combination.
  • Make sure that your Mini DisplayPort or Thunderbolt cable is connected to both computers.
  • If you are currently connected to the iMac, you want to use as a screen, try to connect to return to the login window. Then again press Control-F2.
  • Some old keyboards Apple and third-party keyboards allow may not control-F2 to toggle display modes. In this case, use the keyboard that came with your iMac to activate / deactivate the target Display Mode.
  • If your iMac is currently started in Windows, it will not be in target display mode. Target display mode is not supported in Boot Camp.

• SCREEN NOT COMING (display does not)

  Dear team

  Display does not come in my notebook whenever CapsLock light and light flashes, dealership also checked his RAM, but according to him, it's a problem internal, although wanting to take the necessary steps on an urgent basis

  Serial No. =[personal information deleted]

  PRODUCT C8C11PA #ACJ

  MODEL = HP 2000-2209TU

  [Personal information]

  1 flashes per second means CPU issue. You can have it fixed HP services.

  HP services will replace the right and exact part for this laptop.

  Having repaired with other technicians, I'm not saying that they are not good but that there could be a risk of other future issues.

• Safari 9.1.3 textedit html/css not displaying does not correctly

  I am trying to learn html/css and I'm going through a basis of teaching course that you type some html and css style, and then open it in Safari.

  I went to textedit preferences and selected plain text, I unchecked .txt extension and saved as index.html to try it in safari, and it does not display properly, are there other settings should I set in textedit or safari so that it appears correctly. Here is my simple html text. Safari does not display the style.

  < html >

  < head >

  < title > coffee Starbuzz < /title >

  < style type = "text/css" >

  {body

  background-color: #d2b48c;

  left margin: 20%;

  right margin: 20%;

  Border: 2px dotted black;

  padding: 10px 10px 10px 10px

  do-family: without serif.

  }

  < / style >

  < / head >

  < body >

  Drinks at the coffee Starrbuzz < h1 > < / h1 >

  House mix of < h2 > $ 1.49 < / h2 >

  A smooth, sweet blend of < p > coffee from Mexico, Guatemala and bolivar. < /p >

  < h2 > moka Caffè Latte, $2.35 < / h2 >

  < p > Espresso, steamed milk chocolate syrup. < /p >

  < h2 > Cappuccino, $1.89 < / h2 >

  mix of espresso, steamed milk and milk foam. < /p > < p >

  < h2 > the Chai, $1.85 < / h2 >

  < p > a spicy drink made with black tea, spices, milk and honey < /p >

  < / body >

  < / html >

  My iOS is 10.11.6 Safari is 9.1.3

  Thank you

  Mike

  Have you tried to give the file an extension .css?

• Right-click menu that is displayed does not correctly

  I use firefox 17.0.9 ESR and extended display Windows, I have two screens, one is on 1440 x 900 and the other on 1920 x 1080, if I right click anywhere on the browser when it is on the small screen, everything works as expected, if I pass the browser to the bigger screen and click right I sometimes the menu Sometimes it shows and hide immediately and sometimes just won't show, if I move the mouse on the menu it shows yet once and then hides, this only happens when I move the browser to the larger screen

  Hello, this is perhaps a problem with hardware acceleration - please try to update your video driveror where this does not solve the problem, or there is no new version available at the time, disable hardware acceleration in firefox > options > advanced > General.

• The Satellite A200 display does not illuminate after being idle for 15 minutes!

  Hello!

  I just bought a Satellite A200 1 - AX PSA6 and install Windows XP SP2 + upgrade of bios for winxp.
  After 15 minutes of unactivirty (no not pressing the keys or moving the mouse), I set in power options in Control Panel - what must power OFF display.
  After this time display is switched off (black)!

  But I can't wake up my laptop!
  I'm press any key or move the mouse, but the screen is always black!
  But laptop works!
  I can ping and then by network or remote access connection.

  One way to solve this problem:
  Laptop open and close!
  A200 - "standby mode" and wake up with swithches on screen...

  Hello

  It seems that Windows XP Home edition does not work perfectly on the new laptops designed Vista. Before you live your laptop try to change profile settings (extended battery) power and test the parameters of this profile.
  Tomorrow I'll try to install Windows XP Home on my A200 and I'm really interesting if I even notice.

• Satellite M100-164 display does not illuminate after hibernation

  After the computer wakes up from hibernation by lifting the display panel (cover) and the LCD screen turns off due to power management settings, display shows the Toshiba logo and does not return after a key is pressed and the keyboard is not responding.

  I turned - power & removed the battery without success-.
  OPS: windows XP.
  Help, please.

  Hello

  You have removed the battery but wait you a bit?

  If please plug the laptop and remove the battery.
  Wait 15-20 min and then plug the AC adapter and put the battery in the laptop.

  Then try again!

• Connection 12 '' Macbook to Thunderbolt display does not work (USB - C for HDMI / Lightning)

  I have connected a retina 12 '' Macbook to a Thunderbolt display via two adapters, and no video is coming through.

  Here is what I use:

  1 USB - C for HDMI: (Apple USB - C to HDMI adapter)

  2 HDMI to Thunderbolt (Monoprice adapter)

  Any ideas what's happening? The Thunderbolt display is without a doubt, since power is to come via USB when I plug my phone directly on the back of the monitor. The Apple adapter works because I could try to connect directly to a LG monitor with HDMI ports.

  The present model 2015 MacBook 12 inch Retina does not support the Apple Thunderbolt display

  what I read.  The other models Apple Cinema can work if they are used with correct adapters

  as other brands. Some adapters support the audio, while others do. Note there is

  limits for the specifications of display supported; This can limit their usefulness if it is not better configured.

  Special adapters and cables can allow to configure some display options for use with the MacBook.

  The graphical support through MacBook, MacBook Air, MacBook Pro varies with the specifications.

  The absence of a Thunderbolt port, use of adapters to provide only what it can bear MacBook 12 plug-in software component.

  and the mini-display port cannot connect or transfer at frequencies Thunderbolt usage views. The

  cure should be taken as built-in support for this; If the adapters could carry signals. A new model

  could understand such an improvement; but there is nothing of this specification in the Apple Store again.

  • Use 4K views and Ultra HD TVs with your Mac - Apple Support

  Bolt of lightning • ports and poster: frequently asked questions (FAQ) - Apple Support

  • Get help with graphical problems on external displays connected to your Mac - Apple Support

  Good luck & happy computing!

• Satellite 1110: Secondary display does not work

  I have a satellite 1110
  Connection of a monitor second - does not work
  The settings are correct in what, move your mouse off the screen of the laptop and he enters the secondary monitor - but this monitor is empty
  Tried all the normal things - control work? Yes etc.
  I'm running XP Professional could be corrupted or is it more likely to do with my laptop

  Please someone help - new monitor for Christmas - just can't make it work

  Thank you

  Hello Nick

  According to your description, you can't write that the second display doesn t work. Of course, you have activated the option called extend my Windows desktop on this monitor. In this case, you can remove all windows laptop for external monitor screen.

  If you work with more different windows on this way, your work will be more comfortable. I assume that you do want this and it will be interesting to know how you want to use the secondary display:
  -secondary display only
  -but both with the same point of view?

  Remove the scope option and use the FN + F5 key combination and choose display to use.

  Good bye

• Re: x 505-"turn off the display" does not properly

  To make a long story short, I had a load of problems with my Toshiba Qosmio X 505. I talked to tech support and they had me completely clear the computer and reinstall the OS. Everything has been fine for days until today!

  For some reason any whenever my screen turns off (for energy saving), I can't get my computer to respond. I don't know if he's asleep, going into hibernation mode, or even the difference between one of these things, but when I press the buttons, move the mouse/Touchpad, try multimedia keys, the power button, nothing makes my computer come back. I have to hold the power button / stop and completely restard come back again the computer.

  Why is this happening? It worked great for everyday, but I think it has something to do with the NVIDIA driver update I downloaded. It is the main change I have made to the computer yesterday and now it seems to do. Does anyone have recommendations? How can I make my computer stop doing that? I have all the options of my black screen off for now, but that does not seem a good solution for this problem that he used to work properly.

  Hey,.

  Akuma is right, you should only use the display drivers provided by Toshiba and not nVidia. The nVidia drivers are not pre-tested and that's the reason why they can cause such problems. Also they don t have an overheating protection, installation happens on your own risk.

  If you need to test it with the drivers from the official website of Toshiba. Prior to installation, remove the current display driver, and then restart the computer. Then you can begin with the installation of Toshiba display drivers.

  In the worst case it of necessary to reinstall the whole system again, but before that, you try a system restore to an earlier point.

• T60p on-screen display does not

  Hey, just reinstalled Win XP Pro fresh on my T60p. everything works except display it on the screen for firmware operations (volume display and icons when enabling/disabling of the ThinkLight, etc..) FN + F5 and Fn + F7 still displays work. Already tried to reinstall the expansion card driver and graphics OSD.

  Here's the weird part. When I installed first, it worked fine. I was looking for a different and found adjustment control panel > display > settings > advanced > OSD Panel. OSD has been disabled. I turned it on, hit apply, and it didn't work anymore. I turned off it again, hit apply and it still does not work. What the...? I haven't the time to reinstall Win XP from scratch, can anyone find a fix?

  Thank you!!!

  Hi, I have just re installed the powermanager and power meter is back! Thank you for a ton

• Acer toggle display does not display when you use the Fn + F5 key secret on my Acer Aspire 5560

  What it does:

  When you use the Fn + F5 key combination on my Acer Aspire 5560, it brings up a screen changes on the laptop screen for the selection of an external monitor, I am currently using Windows 7 Ulitmate

  Before the problem:

  Display mode switch Acer existed prior to the upgrades of the drivers

  The problem:

  The toggle screen Acer does not display when you use the Fn + F5 key secret on my Acer Aspire 5560?

  Additon Information needed to solve the problem or any other information:

  I would like to know what driver or software operates the Acer toggle display Mode?

  Also where can I find this driver for computer: Acer Aspire 5560 to bring this Acer toggle display Mode function?

  Acer Toggle display Mode: this is a picture of it when you use the Fn + F5 combination:

  

  Thank you very much Ironfly Ace, it has worked Acer hero of the day

• Startup and display does not work well.

  When I start Windows XP it takes about 4 minutes to the icons appears.  They appear of normal size and the screen turns white and the size of the icons and programs and the internet are extra-large. I go into display properties and reconfigure and find his game on 8-bit!  After configuration back to normal display and restart or turn on again the same thing happens!

  Also, I tried to do a system restore and it does not work either. Please advise me on what to do. Thank you!

  Hi RhondaHeaven,

  I suspect that your display card drivers are corrupted. You have your cd/dvd drivers? If this is not the case, download your display drivers (you will get the model and make from Device Manager - click on start-> settings-> Control Panel-> system-> hardware-> device-> display adapter Manager).

  Click Start-> settings-> Control Panel-> system-> hardware-> Device Manager-> right click on your display-> Uninstall adapter.

  Uninstall display drivers Intel of add/remove programs.

  Restart your computer. Reinstall the drivers from the cd or downloaded driver.

  I hope this helps.