Display geometric curves

Similar Questions

• Displaying several curves on a graphical 2d in reports how can I force a curve to be at the forefront?

  Displaying several curves on a graphical 2d in reports how can I force a curve to be at the forefront? I have two signals, and I want to show a bunk on top of the other. This time Diadem will be only graphic it the other way around. I tried to delete the curves and add them in different orders, change the order that they are in the list of the curve, changing their order in the data, right-click on the curve portal and selecting "move to forground" (this only moves the complete 2D graphic object in the foreground). IM using the Diadem 12.0 base.

  Hello Joe,

  I found what causes your curves draw in the wrong "order".

  You are using two value axes and DIAdem still attracts before Y2 Y1 data, regardless of the order of the curves in the "Curve and definition of the axis" dialog box.

  I enclose your layout with a little modification, I changed the order Y1 and Y2 axis (I swapped whose data is displayed on the value axis) and I get the following result:

  

  Once I looked at your page layout, it appeared, why the order of curves does not reflect the order in which curves were drawn. I didn't - so I just learn something new here as well.

  I hope that this answer to your question, do not hesitate to ask if there is anything else I can help you.

  Otmar

• How to open the Options dialog box to display the curves on the properties panel

  I can find the dialog box options display of curves when I opened the curves by the image > adjustments > curves but correction I do it is not about when to use the curves in the properties panel.  I prefer using the properties panel, but try as I might I can't find a way to access the curves Display Options there.  I need to go back to the 'light' button so that my shadow is in the lower left corner and highlights are in the upper right corner, and not vice versa, as they are now.

  You will find the Display Options of curves for the curves adjustment layer on the shortcut menu in the properties panel

  

• Dynamically hiding / display the curves on the graph of a waveform

  Hello

  Is it possible for IT (OFF) dynamically a particular curve on the waveform table.

  Here is the example below - 3 curves are superimposed and to see a particular curve, it would be nice to have one option on OFF other curves (e.g. using checkbox).

  Thanks in adavnce.

  Pavel

  

  It's actually a built-in function.

  Right click on the legend to draw. Select the visible items > trace visibility box.

• BlackBerry smartphones, add a display language - Curve 8330

  The aide said a display language can be added using the Desktop Manager application loader tool, and it refers to the software online help for office.

  I have checked the help of Office Manager & software online help for office, but could not find info or instructions on adding a display language.

  My device software worm is 4.5.0.127, my worm Desktop Manager 4.7.0.32.

  Any help would be greatly appreciated!

  If you download and install the handheld computer operating system, you can then use the Desktop Manager Application Loader to install additional languages on the device. You can download the OS here

  http://NA.BlackBerry.com/eng/support/downloads/download_sites.jsp

• Display of the smooth curves in SIGHT

  It it is possible to display smooth curves in SIGHT using the line rather than stepped curved staircase function? I'm looking and looking model Excel, but the data I pass by makes much less desirable Excel. I am looking to have a good connection of the curve between the report data to ~ 15 Hz. thank you for your help in advance!

  Hi dc13.

  There is a framework also in the REPORT, but not in SIGHT.  The best you could do would be to create a house in a custom button or menu to select in SIGHT, but the script should call the routine ANALYSIS and custom VBScript.

  Or go to the REPORT.

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• Graph using curve option draws with fake curve when only 2 points

  Hello

  I'm using VBS to create raw data reports.  The plots in these reports have sometimes hundreds or thousands of data points, but sometimes they only have 1 or 2.  I have the option of "Curve" checked in these graphs to show the lines as splines instead of jagged lines.  However, when there are only 2 points, the function of smooth curve represents a curve to connect the two points rather than draw a straight line between them.  It arbitrarily assigns a concave or convex curve between the points.

  Someone else knows this or have a way to correct the assumption of the tiara that the line will be curved?  I guess I could put a code snippet in it checks if there is data of less than 2 points in the game and if so, remove the smooth curve feature, but I don't think it should be necessary.

  Thanks in advance!

  Hi GT_Mark,

  This looks like a valid complaint, since no curvature can be deduced from the 2 data points.  Unfortunately, I don't know any way to set up or improve the tiara "Curve" option, so I'm going to you to implement the software switch that you proposed to disable the display of "Curve" under a certain threshold of data points are plotted.

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• several curves with several ladders on the same graph

  Hello

  I am currently working on a project that include an acquisition of data VI. I want to display two curves with two different scales (0 to 1 and 0 to 200) on the same graph.

  I tried almost all the options in the Properties menu, I can't find something that fits what I want.

  Do you know how to do such a thing?

  Thanks in advance,

  Gabriel.

  Right-click on the existing scale and click on duplicate.

  EDIT: I would add that you need to set ActYScl via a property node to switch between the scales of the difference if you want to perform operations on them.

• Curve adjustment option

  When I used the curve adjustment option, I pulled the curve down to get the photo darker.  Somehow something has changed and now the photo is lighter.

  How can I change this

  Thank you

  Bob

  It is possible that you see the difference between the RGB vs CMYK mode edition edition. In RGB mode, dark colors are left and highlights or white on the right. In CMYK, the opposite mode. If the image is CMYK, you will get a lighter image when you pull down.

  Fortunately, you can get the display of curves to show you the curve you like. Opinion on the attached screen capture the marked area curve Display Options. Switch of pigment ink to light and your controls work as you are used, any color space is the document.

  

  If you use an adjustment layer, you will find the curve display options from the dropdown at the top right (see screenshot)

  

• How to put the component to BPC become a form of circle

  How instead of the item display as the image below? I'm trying to go to ultiboard. Thanks for help

  Hi Marxurs,

  Ultiboard, there is an option to display angle curves all and this is useful when you work on a point in polar coordinates.  Select Options > customize the User Interface, on the 'Orders' tab select 'Place' in the 'Catégories' window, then select "place the Angle line (Place) ' under the 'Orders' box, hold down the left mouse and drag this option and drop it somewhere on your toolbar to place an icon.  If you prefer, instead of placing an icon in your toolbar, you can create a keyboard shortcut.  Select the "Keyboard" tab in the Customize dialog box, and then locate the place all the lines of the angle and assign the keyboard shortcut for this option.

• Add row in table or list multi-column

  Hello

  I discovered Labview (version 8.6) and I am trying to create a program of asquisition of data pour a shock absorber test bench.

  I collects the data and table classes in UN, AND cre a XY graph pour display a Representative force of the shock curve depending on the speed of movement of the stem. Until there all right!

  My problem is that I want that when the cycle is done en continue, new data appears on the next line instead of "crush the Report values as is currently the case. I tried with the tool 'table' and the 'multi-column list' tool but the problem is the same: How do I do?

  It happens that I have the same problem to display the curves on my XY graph, I also need help pay this problem.

  Please pour your attention and your help.

  Kind regards

  Jeremy

  PS: If my spouse VI to image the problem.

  Hello Jeremy,

  First of all, I would like to know what you mean by en run continue? If you specify normal here the double arrow d "performance, I would like to inform you that it must be used only when debugging your application, pour allow you to change values on orders without having to continually again l ' execution of your vi.

  If you want that your program runs continuously, you can add a loop around your code, with a STOP button for example to stop it.

  Then, if you get to write a single line, it is because although you creating a table 2D of your data before sending it to the node of the list property, this table is filled by a single column.

  You will find attached your slightly modified VI pour integrate a loop at the level of the acquisition.

  I used a tunnel with auto-indexation, which allows you to create a new row in the table 2D at each iteration of the loop. It's a simple way, but is not particularly the best, you can also set up your creations of table functions in the loop. In the same way, it will take maybe add functions of timing in the loop, but in your case, I think that the acquisition it even cadencera the execution of the loop.

  The report will be completed once you have clicked the STOP button.

  This solution of hoping to match your need.

  Kind regards

• My Documents contains shortcuts to my music, my pictures, and my videos

  In Explorer Windows Win 7 (64), libraries for My Documents, my music, my pictures, and my videos are correctly displayed.

  However, the left pane shows that in My Documents, in addition to personal folders, I created, there are shortcuts for my music, my pictures, and my videos. These show that access is denied when I click on them.

  If I select My Documents in the left pane the three shortcuts are not displayed in the right pane.

  How can I remove or delete these shortcuts in the left pane display in My Documents?
  Thank you
  Dave

  They are shortcuts, so you can right-click / they / them and click on delete.

  Shortcuts always display the curved right arrow symbol,.

  Then right click the libraries list and click on restore default libraries.

  See you soon.

• PDF = > Illustrator or InDesign = > PDF

  I have Adobe CS4 Premium including Acrobat Pro 9.4.4 running on Mac OS X 10.6.7 on a Mac Pro 3.1 with 8 GB of RAM.  I received a. PDF file as an attachment to an e-mail.  The file contains a floor plan to the floor of a building where I have an office.  The floor plan is more of a simple schema that is a real floor plan.  There is no security issues or copyright issues involved.

  I want to display external curves of tiny footprints of a couple of entry doors to my office door, showing people how to navigate the halls to find my office. I will then make a new. PDF file I will attach to emails to clients confirming appointments that will take place in my office.  This will eliminate confusion that some people have in following the instructions written at my office.

  I need help on how to take the image of the PDF incoming and place it in another Adobe application like Illustrator 14.0.0 or InDesign 6.0.6 (I use most often) where I can insert the small footprints and then save or export the document updated in PDF format.  Thank you in advance for any help you can give.

  Pretty simple since it requires no editing of the actual PDF file.

  Create a new file in InDesign, use file > Place to import the PDF, add your fingerprints no, use the file > export to export to a new PDF.

• Need urgent help! In my Vision Application, how to extract the parameters of the geometric model specified curve was generated by the template editor OR?

  I have an application of machine vision, in which the geometric pattern match technique was used to find the target in the images of type variant.

  as we know, we do a geometric model by model OR editor in the editor we can adjust the parameters of the curve specified settings to get the desired curves and we derive the custom box to ignore during the match. then we save the use of the same model in our application of vision.

  Now my question is coming. When I program my request for the geometric game. I have specified the parameters of the curve for the entrance of the IMAQ Advanced Setup learn ringtone 2, of course, I have to adjust this identical to the model, but I don't know how we extract the geometric model. I tried all the methods, for example, I can read data custom, IMAQ get characteristics of the geometric model(it's just for the basic functionality? so is there even a VI based edge?), even at anasys PNG file formats! But I can't read the info of the geometric model by myself!

  It is also illogical to adjust the CURVE SETTINGS manually again for the " IMAQ Advanced Setup Learn Pattern 2" after that I already have in the template editor OR!

  Hello

  Why do you need to specify the curve settings once again, if you have already built a model using the template editor? You don't need to use "IMAQ Advanced Setup learn geometric model 2 VI" to find games (see the attached example).

  You can wire the 'curve settings' control to 'IMAQ configuration geometrical game model 2 VI', but the values are not used if wire you a Boolean true to the node "use learning curve settings" (it's like that by default). To prove it, I enclose a small program with pre-created model (using the template editor) for a geometrical alignment. The model and the test of three images are also included.

  Try changing the settings of the curve with the 'use know curve settings' enabled, and you will see the corresponding score remains the same. Disable the Boolean control, then try to change the curve settings.

  Also take a look at the detailed help for "IMAQ configuration geometrical game model 2 VI", specifically the "learning curve parameters of use."

  I hope this helps.

  Best regards

  K

• Display problem of Contact of Smartphones blackBerry to my BB Curve 9220

  Hello guys...

  I recently bought a BB 9220 curve. When someone call me at that time there no (name of appellant already added to my contacts) the calling name display calling number display.

  In short, sometimes the name of the caller display and sometimes not display.

  It could be one of the four solutions... Try these:
  1. make sure that you set your own code to the Dialer phone screen > Options > smart dialing.
  Set your country Code in this format: "+ xx" where xx = country code. Some countries have two or three-digit country Codes. Do not place not the '+' in the entrance of your contact.
  * In the United States, the value of this country as '+ 1' Code and place your code in the appropriate box (this normally the default setting in a new BB).

  2. in the same place, change the length of National number for the number of digits corresponding to your country (since some countries have less than 10 as that set by default in the BB). Check out the total numbers, less country code. Do not place not the '+' in the entrance of your contact.
  * For example, some countries have a total number to 8 (more than 3 for the country code). You must enter '8 '.

  3. you probably have "Content Protection" located on your address book.
  OS5 devices: look at the Options > Security > General settings. Scroll down to the content Protection > include addresses = no
  OS6 devices: Home screen > Options > Security > encryption > uncheck encrypt.

  4. go to Options on your device > Security Options > encryption > include contacts the value 'No '.