Display lights after that PC is awakened from his sleep 10 Windows.

Similar Questions

• Lost after that computer woke up from his sleep and sound after the Microsoft Fix It

  Original title: no sound

  Hello.

  No sound from my computer.  The Conexant device work properly.  Volume is in place on the speakers and the sounds of Windows.  Windows Media Player is not cut.  No speakers or headphones are involved.

  This problem started a couple of weeks, when I ran Microsoft difficulty It Center.  I used the difficulty It Center because I always lost sound after that my computer is awake to being asleep, which means that I always had to reboot to get the sound.  But now there is no sound whatsoever.

  Can you help me?

  Hello

  You can refer to the following link to download the latest version of the Toshiba support drivers.

  Toshiba support

• Mini Mac not awakened from his sleep by action keyboard or mouse

  My mac mini is not awakened from his sleep by mouse or keyboard action, only a short press of the power button you wake up the mini. Any suggestions for a workaround or fix?

  Try resetting the SMC and the PRAM and then retest. iMac SMC and the PRAM reset

• Fingerprint reader does not work after the laptop awakens from his sleep.

  Pavilion DV6-6c15nr

  Windows 7 Home Premium

  Fingerprint reader works fine when the computer starts. The drive works fine if I manually lock the system. When the computer enters mode "sleep" through inactivity, then wakes up from his sleep, the fingerprint reader does not work. The player power led does not illuminate, the player does nothing if I drag a registered fingerprint. I must select use authentication information and enter the Windows password. Device Manager says device working properly but it doesn't help. I checked for BIOS, Windows and driver updates but I run in all aspects.

  Hello

  Uninstall the software and current driver for the fingerprint reader.

  Resources:
  Uninstall software in Windows 7

  Uninstall or change a program in Windows 7

  Download and install the latest driver from here.

  Download and install the latest version of the software from here.

• Awakened from his sleep system update Windows Media Center

  Hello

  Directly to the question:

  I have a problem that of a regular windows media center update wake my computer from sleep every day.
  This update can be found as a scheduled task in Task Scheduler. The problem is, that it cannot be edited or deleted.

  If I try and edit the task by unchecking the choice of her "wake the computer to run this task", I get an error message:

  An error has occurred for task mcupdate_scheduled. Error message: support for transactions in the specified resource manager is not started or has been closed because of an error

  If I try and I remove the task completely, I get a similar error message:

  Support for transactions in the specified resource manager is not started or has been closed because of an error

  I already tried the following suggestions to resolve this problem:

  Fsutil resource setautoreset true c:\ cmd break-in.

  Removal of the C:\Windows\System32\config\TxR transaction logs

  These did not work.

  I guess Microsoft is not willing to pay my extra electricity bills? ;)

  Hi Libi,

  1 did you do any change on the computer before this problem?
  2. What is the brand and model of the computer?

  I suggest you follow the link below and refer to the suggestion of Sebastian M responded on May 21, 2011

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/task-mcupdatescheduled-the-task-image-is-corrupt/a0a25592-2683-E011-9b4b-68b599b31bf5

  If the suggestion above did not help, follow the steps (Fixit Utility) in the article:

  http://support.Microsoft.com/kb/979878/en-us

  Hope this helps for suggestions.

  Just reply to the State of the question to get help on Windows.

• HDMI is not send the signal on external monitor once the laptop awakens from his sleep

  I have my TV as a second monitor for my laptop. I connected via HDMI. Once I leave my laptop a little past in mode 'sleep' and the screen loses the connection. Once I wake up the laptop, the monitor is not turning back on my desktop. It remains off. I disconnect and reconnect the HDMI and it does nothing. During this operation, my laptop screen flickers as when he connects to it, but nothing happens. My TV does not receive the signal, but the laptop says it's connected. What can I do to fix this? Thank you

  PS. I have to restart my laptop each time to allow to work my external monitor.

  Right-click anywhere in your option chart click homepage > output > and choose computer laptop + moniter

• W520 waking up from his sleep by himself and to exhaust the battery

  Hello.

  I had a problem with my sometimes W520.

  The problem is, he awakens from his sleep by himself. I run the start > Sleep function in windows and wait for the led around the powerbutton fades in and out. Then a few hours later he apparently awake mode standby (even with the lid closed) and my battery is drained completely to 0%.

  Someone knows what may cause this?

  Go to a command prompt and type in
  powercfg - devicequery wake_armed

  It will list the devices that can cause the machine automatically adopt the fashion watches.

• I opened my photos of my SDCard with File Explorer, select them all, then I select move to fill after that I saw the bar of loading with the green line. After that all my photos from my computer disappered and were removed from my SD card. Please, he

  I opened my photos of my SDCard with File Explorer, select them all, then I select move to fill after that I saw the bar of loading with the green line. After that all my photos from my computer disappered and were removed from my SD card. Help, please

  I looked everywere in my computer, but they are not found

  I bet that you have selected the folder Adobe Bridge CC or CS6, and it would be in there under Program Files/Adobe/or Program Files (x 86) / Adobe /.

  Move to... in the file Explorer apply only to records not the bridge program.

  You open Bridge and Photo Downloader allows you to move pictures from your SD card in the deck (also called import)

  Gene

• Can you display text after that you checked a box or not?

  Can you display text after that you checked a box or not?

  Ex:

  • Yes (please contact Bob x 3-1234) only want it to appear when you check the box)
  • NO.

  Sure. If you use a field (text field, button) to display the text, the script of the mouse to the top of the Yes box could be:

  getField("button1").display = event.target.value = "Yes"? Display.visible: display.hidden;

  Change "button1" to the actual name of the field and 'Yes' is the value of exports of the Yes box. You can use what you want, and you'll probably want to make the button read only as well.

• I plug in a device after I installed the drivers from the USB says windows can't recognized the device what should I do to solve it.

  I plug in a device after I installed the drivers from the USB says windows can't recognized the device what should I do to solve it.

  Hello

  I suggest to go to the link below and run the fix tool provided or follow the manual procedure provided to solve the problem.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  http://support.Microsoft.com/kb/925196

  You can also check the below link for more information about advanced troubleshooting tips for General USB in Windows XP problems.

  http://support.Microsoft.com/kb/310575

• Vista wakes up from his sleep by himself

  As the title says, my vista pc wakes up from his sleep by himself. Normally, he'll sleep for 10-15 minutes before you wake up. At other times, it is random and wake up in 2 minutes or 30 minutes. I looked in the forums of countless and tried the suggested solutions, but can not solve the problem. The only thing I found to keep him asleep is disconnected the network cable from the PC or unplug the network cable from the cable modem. I suspect some service or program he wakes up, but I have no idea of that. Here's what I tried:

  I used powercfg command-line command to see which devices have been enabled to wake up the pc. They were only the mouse & keyboard. They are all two peripheral cables usb. I unplugged each separately before you put the pc to sleep and he will still be awake. I use "last_wake" but I just get '0' and in the event viewer it says "wake source unknown.

  I made sure "allow this computer to turn off this device to save power" has been verified for the network adapter in the power management tab. I also disabled the option in the advanced NIC Properties. I also disabled it in the bios. After having done that and the pc wakes up is still what intrigues me the most when I don't know if I unplugged the NIC in the pc go to sleep for hours until I decided to wake up. It is wired not wireless.

  I have that 'sleep' lit. There are no hybrid sleep or hibernation available mode.

  It is vista business so I don't have a Media Center. Media Player is not enabled for sharing files on the network or to pick them up. Media sharing is turned off, and it's only pc's on my network. Also just in the 'media settings' box is configured to allow the pc to go to sleep in power options.

  I checked the Task Scheduler for tasks that can be set for 'wake up this computer' so it can work, but only one of them has this option. It's for multiple monitors and I unchecked the box and the pc wakes up still. I checked for hidden tasks, and the only one I found that could be the culprit was MS RSS. However, after the removal of this pc still wakes up.

  I don't have a sidebar option.

  Windows Update is set on notify me when updates are available.

  I also did a msconfig & selected 'selective startup '. I have uncontrolled startup programs. The pc is still awake.

  Tried to start the pc in safe mode, but there is no option of sleep available to test if it wakes you up from his sleep in safe mode.

  Last but not least is when the pc is wake up he's going to sleep again within 2 minutes.

  As you can see I tried everything I could think of without much success. Can someone tell me something again or that I have not tried?

  I have no idea what you're trying to do, but here's what I found my problem. I have a motherboard intel. Although I disabled "wake on lan" both vista & bios there was yet a 3rd parameter I was not aware of. He was set apart from the bios or vista. It is a framework of intel in the 'management engine interface' if I remember correctly. It is accessible after the bios option and before loading windows. Once I turned it off my pc stop, out of sleep. So, if you have a motherboard intel, then that is your problem.

• Computer wakes up from his sleep at night

  Hello

  I have a problem of disruptive reeally with my Windows 7 PC: he wakes up from his sleep to ~ 2 hours every night, I put it to sleep and it wakes up again between 3-04:00. Is it possible to limit this, or to diagnose what executable triggers this?

  Thank you
  Levi

  Windows performs many tasks during the night, including the work of backup, hard drives and other degragmenting.  These are usually the root cause of the alarms.

  You can begin troubleshooting by opening an elevated command prompt * and type powercfg /lastwake to see what woke up the last computer.

  * To open a command prompt, type cmd in the Start Menu, and then press Ctrl-Shift-Enter.

  If it was useful, you can vote by clicking on the green triangle. If it solves the problem, click on propose as answer. Thank you!

• Windows 8 wifi is not connecting after waking up from his sleep.

  HP Envy 15-3247NR

  Recently upgraded to windows 8 pro to windows 7 and I found that I couldn't connect to any wireless network after that the computer is in mode with 8 'sleep'. I've tried everything. Drivers updated, bios, intel. Everything is as it should be, but no matter what, the wifi option remains grayed out if the airplane mode is enabled or disabled. I really want to solve this problem, please help.

  Hello

  Thanks for your posting in the Microsoft community

  As I read the full question, you did not mention what you have taken to correct the isuse of step
  Basically, this problem happens because of the Wifi configuration

  Go to Device Manager by right clicking on the section of the computer,
  And go to the properties of the wireless Ethernet drivers in device list.
  After going to the last TAB properties will be power management, click on this and you will get two options as

  ""Allow this computer turn off wifi to save energy.

  Just uncheck and try again

  And back here

• ThinkPad S3 Yoga 14 wake up from his sleep at random

  Seem to have supply problems since the last days of three/four - guard computer wake from sleep at random, without mouse input or anything to tell him to do. Don't stop running, awake, after that, even if the lid is closed. Massive waste of battery. I'm running W10, and I don't have problems with something like this until a week ago. Maybe some wUpdate? Anyone else having this problem, the solutions found?

  It seems that windows updates have cured this issue. Thank you all.

• Recently I can't print from Firefox after that update - can print from all the rest.

  Cannot print from Firefox. Thougth, first of all, it was a printer problem, but could print from other programs. Then tried printing from IE, and there is no problem. I think that this is related to the most recent update/upgrade.

  This has happened

  Each time Firefox opened

  == I think it started after the most recent update/upgrade.

  Try of the reset described here:
  http://KB.mozillazine.org/Problems_printing_web_pages#Reset_pr...