Lost after that computer woke up from his sleep and sound after the Microsoft Fix It

Original title: no sound


No sound from my computer.  The Conexant device work properly.  Volume is in place on the speakers and the sounds of Windows.  Windows Media Player is not cut.  No speakers or headphones are involved.

This problem started a couple of weeks, when I ran Microsoft difficulty It Center.  I used the difficulty It Center because I always lost sound after that my computer is awake to being asleep, which means that I always had to reboot to get the sound.  But now there is no sound whatsoever.

Can you help me?


You can refer to the following link to download the latest version of the Toshiba support drivers.

Toshiba support

Tags: Windows

Similar Questions

  • Computer wakes up from his sleep at night


    I have a problem of disruptive reeally with my Windows 7 PC: he wakes up from his sleep to ~ 2 hours every night, I put it to sleep and it wakes up again between 3-04:00. Is it possible to limit this, or to diagnose what executable triggers this?

    Thank you

    Windows performs many tasks during the night, including the work of backup, hard drives and other degragmenting.  These are usually the root cause of the alarms.

    You can begin troubleshooting by opening an elevated command prompt * and type powercfg /lastwake to see what woke up the last computer.

    * To open a command prompt, type cmd in the Start Menu, and then press Ctrl-Shift-Enter.

    If it was useful, you can vote by clicking on the green triangle. If it solves the problem, click on propose as answer. Thank you!

  • Display lights after that PC is awakened from his sleep 10 Windows.

    I have exactly the same problem on the Envy 17-k100.  My system has behaved very well even after the 10 Windows upgrade, but suddenly began to expose these problems once some sort of update has been installed within the past few weeks.

    Hello @Dongledad,

    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.

    I read your post about the question of Sleep Mode and tried to help you!

    Please see the post by community member DanG82, which explains how to fix the problem: insomnia with Windows 10 mode

    Please let me know if this information has been helpful by clicking the thumbs up below.  If this post has solved your problem, then please click accept as a Solution.

    Kind regards!

  • I am trying to set up my computer, so I can send emails and letters with the Microsoft speech recognition

    Salvation in Ottawa Canada.  I am using the above in my laptop.  I was given Microsoft LifeChat LX-3000 running Micro cover and the disc that comes with it.  Disk would not properly charge during installation.  I went to the Microsoft website and tried to download this product, and I got the same results.  Sometimes I plug my head game, and it works for a long time.

    I am trying to set up my computer, so I can send emails, write letters nothing complicated.  I use speech RECOGNITION Microsoft,.
    instructions.  My first questions.  Do you actually have a program, in order to activate speech recognition?

    I'd appreciate any help, advice, etc.

    I approach the age where, I rely on my computer help at times and I really like the lap top.

    Bryan W. Fuller
    * original title - Microsoft Speech recognition - 9 windows - Vista home premium *.

    Hi Bryan,.

    You can use your voice to control your computer. You can say commands that the computer responds to, and you can dictate text to your computer. Before you start using Windows speech recognition, you must have a microphone attached to your computer.
    I suggest you to see the links and check if it helps.

  • Computer wakes up from his sleep in 10 seconds.

    When put to sleep it turns back on after 10 seconds

    Original title: sleep problem

    Hi AlanCampbellUD,


    Thank you for keeping us posted.

    Glad to know that the problem is solved. Do not hesitate to contact Microsoft Windows Forums for questions relating to Windows in the future.


  • Whenever I get an email my computer wakes up from his sleep.

    My old modem out crapped so my cable provider gave me a new one that is a newer model.  The old man had a switch that smokers me to disable the internet connection when not in service.  Be able to turn off the modem was useful because it would not transmit emails to my PC when I put it in mode 'sleep'.  If I did not turn this switch provided email in when the machine is in "standby" wake up the machine.  Since the new modem doesn't have this option, it is constantly waking mode ensures by incoming emails.  Is it possible that I can implement something in Windows Vista or IESO that Windows will not wake when the modem tries to send me an email?  My PC is a desk top Dell Inspiron 350 running Vista Service pack 2 and Windows Mail version 6, and I use IE 8.  The modem is a surfboard SBV5222 Moterola.  Thank you.

    original title: incoming mail wakes up my PC

    Do you have a gadget for mail?  Who will check mail if Winmail is closed.  Otherwise I do not know how you can receive by mail when its closed.


  • browser window is reduced when the computer wakes up from his sleep, must be enlarged twice to restore a window as large as the screen

    I tried to use the reset feature, but it does not work

    I'm not a function like the one available on
    AOL, which allows the "screen size and position" to be saved

    Operating system is Windows 7 x 64. Firefox version is 20.0.1

    Note: my problem has stopped since I expanded manually (instead of using the button to enlarge) the Firefox window to fill the screen

  • Windows wakes up from his sleep and WMC think by mistake the TV recording disc is full, and it lacks the scheduled recordings and live TV will not play.

    Dissemination of a previous record and stop (without deleting) appear to clear the error indicator and TV can then be played or recorded. What is happening in the two windows 8 and 7. I tried to change the disc to record, but the same thing happens.

    do not use the same destination for both version of windows. see if http://answers.microsoft.com/en-us/windows/forum/windows_8-pictures/windows-media-center-wont-record-shows/4d191016-1ba9-4a0b-9938-c54d501e8d6f?msgId=b9898f33-1429-4c6a-bda2-7c051a2c251d help.


    MVP Windows Entertainment and connected home

    My Blog - http://digitalmediaphile.com/

    Connected world Blog Reader Windows 8 App Barb-

    Windows and Surface drive Windows 8 App community

    Please mark as answer if that answers your question

  • After the update to el Capitan my iMac will not be asleep. I put it to sleep and turn off the mouse and keyboard that goes with it, and 5-10 minutes later, he wakes up on his own. Now, I have to stop it after use and each time only. Major pain

    After the update to el Capitan my iMac will not be asleep. I put it to sleep and turn off the mouse and keyboard that goes with it, and 5-10 minutes later, he wakes up on his own. Now, I have to stop it after use and each time only. The Major pain. Any help would be greatly appreciated.

    Please test after taking each of the steps that you have already tried:

    Step 1

    Take all of the measures suggested in this support article, including those under the title "If the previous steps do not work." It is the starting point for a new effort to solve the problem.

    Note that, as stated in the article, the computer will not sleep, if some sharing services are enabled. In the menu bar, select

     ▹ System Preferences... ▹ Sharing

    Disable all sharing services.

    Step 2

    If sharing music iTunes home sharing is enabled, disable it or quit iTunes. Do the same with third-party applications that have a similar feature.

    Step 3


     ▹ System Preferences... ▹ Accessibility ▹ Speakable Items: Off

    Step 4


     ▹ System Preferences... ▹ ▹ Advanced Bluetooth...

    and uncheck the two boxes marked

    Open Bluetooth Setup Assistant at startup if...

    Step 5

    Reset the printing system.

    Step 6

    Back up all data.

    Triple-click on the line below on this page to select, then copy the text to the Clipboard by pressing Control-C key combination:


    In the Finder, select

    Go ▹ go to the folder...

    from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

    A folder named 'vm' should open. Inside, there may be a file named 'drag '. Move this file and only this one in the trash, but do not yet empty. You will be asked for your password. Close the folder window.

    Restart the computer and empty the trash.

  • Fingerprint reader does not work after the laptop awakens from his sleep.

    Pavilion DV6-6c15nr

    Windows 7 Home Premium

    Fingerprint reader works fine when the computer starts. The drive works fine if I manually lock the system. When the computer enters mode "sleep" through inactivity, then wakes up from his sleep, the fingerprint reader does not work. The player power led does not illuminate, the player does nothing if I drag a registered fingerprint. I must select use authentication information and enter the Windows password. Device Manager says device working properly but it doesn't help. I checked for BIOS, Windows and driver updates but I run in all aspects.


    Uninstall the software and current driver for the fingerprint reader.

    Uninstall software in Windows 7

    Uninstall or change a program in Windows 7

    Download and install the latest driver from here.

    Download and install the latest version of the software from here.

  • Vista wakes up from his sleep by himself

    As the title says, my vista pc wakes up from his sleep by himself. Normally, he'll sleep for 10-15 minutes before you wake up. At other times, it is random and wake up in 2 minutes or 30 minutes. I looked in the forums of countless and tried the suggested solutions, but can not solve the problem. The only thing I found to keep him asleep is disconnected the network cable from the PC or unplug the network cable from the cable modem. I suspect some service or program he wakes up, but I have no idea of that. Here's what I tried:

    I used powercfg command-line command to see which devices have been enabled to wake up the pc. They were only the mouse & keyboard. They are all two peripheral cables usb. I unplugged each separately before you put the pc to sleep and he will still be awake. I use "last_wake" but I just get '0' and in the event viewer it says "wake source unknown.

    I made sure "allow this computer to turn off this device to save power" has been verified for the network adapter in the power management tab. I also disabled the option in the advanced NIC Properties. I also disabled it in the bios. After having done that and the pc wakes up is still what intrigues me the most when I don't know if I unplugged the NIC in the pc go to sleep for hours until I decided to wake up. It is wired not wireless.

    I have that 'sleep' lit. There are no hybrid sleep or hibernation available mode.

    It is vista business so I don't have a Media Center. Media Player is not enabled for sharing files on the network or to pick them up. Media sharing is turned off, and it's only pc's on my network. Also just in the 'media settings' box is configured to allow the pc to go to sleep in power options.

    I checked the Task Scheduler for tasks that can be set for 'wake up this computer' so it can work, but only one of them has this option. It's for multiple monitors and I unchecked the box and the pc wakes up still. I checked for hidden tasks, and the only one I found that could be the culprit was MS RSS. However, after the removal of this pc still wakes up.

    I don't have a sidebar option.

    Windows Update is set on notify me when updates are available.

    I also did a msconfig & selected 'selective startup '. I have uncontrolled startup programs. The pc is still awake.

    Tried to start the pc in safe mode, but there is no option of sleep available to test if it wakes you up from his sleep in safe mode.

    Last but not least is when the pc is wake up he's going to sleep again within 2 minutes.

    As you can see I tried everything I could think of without much success. Can someone tell me something again or that I have not tried?

    I have no idea what you're trying to do, but here's what I found my problem. I have a motherboard intel. Although I disabled "wake on lan" both vista & bios there was yet a 3rd parameter I was not aware of. He was set apart from the bios or vista. It is a framework of intel in the 'management engine interface' if I remember correctly. It is accessible after the bios option and before loading windows. Once I turned it off my pc stop, out of sleep. So, if you have a motherboard intel, then that is your problem.

  • W520 waking up from his sleep by himself and to exhaust the battery


    I had a problem with my sometimes W520.

    The problem is, he awakens from his sleep by himself. I run the start > Sleep function in windows and wait for the led around the powerbutton fades in and out. Then a few hours later he apparently awake mode standby (even with the lid closed) and my battery is drained completely to 0%.

    Someone knows what may cause this?

    Go to a command prompt and type in
    powercfg - devicequery wake_armed

    It will list the devices that can cause the machine automatically adopt the fashion watches.

  • Mini Mac not awakened from his sleep by action keyboard or mouse

    My mac mini is not awakened from his sleep by mouse or keyboard action, only a short press of the power button you wake up the mini. Any suggestions for a workaround or fix?

    Try resetting the SMC and the PRAM and then retest. iMac SMC and the PRAM reset

  • Using the Microsoft Fix it Center could I delete just Dell Support Center from my computer

    Dell support center come on my Dell Inspiron 1501. The hardware warranty has expired and dell support load because it support, so using the Microsoft fix Center can remove just my computer dell support center now in the installation of United Nations programs. Just scan Dell support center for problums, but dose not offers not anywhere what fixs unless you have to pay a cost of $$$ for dell fix any problum.

    You should be able to remove the Dell Support Center of control panel software, add or remove programs.


  • Aero on vista on seems to make execution slower and start upward after the microsoft icon on screen-it takes about 1 minute to get on the desktop! Otherwise everything else is relatively ok - for vista, that is _

    I ran a check for preformance on my vista and it came as 2.6 - slow due to the Aero.  How to solve this problem and have rated overall performance.  Also when starting my Acer, it takes about 1 minute to start after the microsoft icon. After 1 minute, then the system tray and the desktop is displayed.  What's wrong?  I ran all the controls of viruses and worms, and all have been supported by Kaspersky or deleted, fixed or quarentined!

    I ran a check for preformance on my vista and it came as 2.6 - slow due to the Aero.  How to solve this problem and have rated overall performance.  Also when starting my Acer, it takes about 1 minute to start after the microsoft icon. After 1 minute, then the system tray and the desktop is displayed.  What's wrong?  I ran all the controls of viruses and worms, and all have been supported by Kaspersky or deleted, fixed or quarentined!

    You can read this:


Maybe you are looking for

  • Virus detected Message

    I just got this message.  Is this true?  What should I do?

  • Acer media app replaced by abmedia app

    Recently my acer media app upgraded to a version more recent, but is also differently named as abmedia.  Abmedia app will not autorun when a DVD is inserted and abmedia is not an available option in the auto-launch utility.  How can this be fixed or

  • Windows Mail is the emails duplicate download suddenly

    Several problems related to Windows Mail. Help please. I don't know if this is the right forum or not, since I can't find one for Windows Mail. Here's my problem; yesterday, on 23 April, I opened my Windows Mail program and click "receive all". The b

  • Microsoft Works business cards: How can I remove it?

    I made a card, but it only printed instead of an entire sheet.  I'm trying to remove it from my computer. Everytime I open a new document, it does appear the business card I can't remove it. I would like to create a new card and do print an entire sh

  • How empy and replace the buttons inside the Manager of horizontal management.

    Hello! So basically, I have 2 buttons at the top of the screen and a set of buttons inside a HorizontalFieldManager (let's call is Set 1 and 2). Now, when I click on the first button it should appear a Set 1 and then appear Set 2 and remove the Set1