Mini Mac not awakened from his sleep by action keyboard or mouse

Similar Questions

• HP Pavilion 13-a113cl: computer HP Pavilion laptop won't wake up from his sleep by the keyboard or mouse

  I don't know if it is good advice to post this question in, but I'm having the same problem with two a113cl-13 laptops HP Pavilion running Windows 10 Pro (64-bit). The issue has to do with the awakening of the machines to sleep using the key on the keyboard or the mouse. I'm not having problems with them to wake up from sleep using the button of power or when I open or close them.

  I checked the BIOS and power settings are not there. (Version of BIOS F.32)

  I have checked boxes to allow devices to wake the computer in the management section of power without success.

  I changed the Intel MEI driver with 9.5 instead of 11 which is usually installed without success.

  I don't know if there is a problem with the BIOS and Windows 10 or something driver associated. Any suggestions would be greatly appreciated.

  Hello @jpk717,

  Thanks for the information!

  Since you have formatted the drive, you must be unable to return to the old operating system, unless you use recovery media.  You can find your product here recovery media:

  USB - Windows 8.1 Recovery Kit 64B

  You can try to use the recovery media to install the original operating system and see if the problem is resolved.  If you choose not to go down this path, you can try to re - install Windows 10, using the media creation tool.

  I hope this helps.

  Have a great weekend!

• Fingerprint reader does not work after the laptop awakens from his sleep.

  Pavilion DV6-6c15nr

  Windows 7 Home Premium

  Fingerprint reader works fine when the computer starts. The drive works fine if I manually lock the system. When the computer enters mode "sleep" through inactivity, then wakes up from his sleep, the fingerprint reader does not work. The player power led does not illuminate, the player does nothing if I drag a registered fingerprint. I must select use authentication information and enter the Windows password. Device Manager says device working properly but it doesn't help. I checked for BIOS, Windows and driver updates but I run in all aspects.

  Hello

  Uninstall the software and current driver for the fingerprint reader.

  Resources:
  Uninstall software in Windows 7

  Uninstall or change a program in Windows 7

  Download and install the latest driver from here.

  Download and install the latest version of the software from here.

• HDMI is not send the signal on external monitor once the laptop awakens from his sleep

  I have my TV as a second monitor for my laptop. I connected via HDMI. Once I leave my laptop a little past in mode 'sleep' and the screen loses the connection. Once I wake up the laptop, the monitor is not turning back on my desktop. It remains off. I disconnect and reconnect the HDMI and it does nothing. During this operation, my laptop screen flickers as when he connects to it, but nothing happens. My TV does not receive the signal, but the laptop says it's connected. What can I do to fix this? Thank you

  PS. I have to restart my laptop each time to allow to work my external monitor.

  Right-click anywhere in your option chart click homepage > output > and choose computer laptop + moniter

• Awakened from his sleep system update Windows Media Center

  Hello

  Directly to the question:

  I have a problem that of a regular windows media center update wake my computer from sleep every day.
  This update can be found as a scheduled task in Task Scheduler. The problem is, that it cannot be edited or deleted.

  If I try and edit the task by unchecking the choice of her "wake the computer to run this task", I get an error message:

  An error has occurred for task mcupdate_scheduled. Error message: support for transactions in the specified resource manager is not started or has been closed because of an error

  If I try and I remove the task completely, I get a similar error message:

  Support for transactions in the specified resource manager is not started or has been closed because of an error

  I already tried the following suggestions to resolve this problem:

  Fsutil resource setautoreset true c:\ cmd break-in.

  Removal of the C:\Windows\System32\config\TxR transaction logs

  These did not work.

  I guess Microsoft is not willing to pay my extra electricity bills? ;)

  Hi Libi,

  1 did you do any change on the computer before this problem?
  2. What is the brand and model of the computer?

  I suggest you follow the link below and refer to the suggestion of Sebastian M responded on May 21, 2011

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/task-mcupdatescheduled-the-task-image-is-corrupt/a0a25592-2683-E011-9b4b-68b599b31bf5

  If the suggestion above did not help, follow the steps (Fixit Utility) in the article:

  http://support.Microsoft.com/kb/979878/en-us

  Hope this helps for suggestions.

  Just reply to the State of the question to get help on Windows.

• Display lights after that PC is awakened from his sleep 10 Windows.

  I have exactly the same problem on the Envy 17-k100.  My system has behaved very well even after the 10 Windows upgrade, but suddenly began to expose these problems once some sort of update has been installed within the past few weeks.

  Hello @Dongledad,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.

  I read your post about the question of Sleep Mode and tried to help you!

  Please see the post by community member DanG82, which explains how to fix the problem: insomnia with Windows 10 mode

  Please let me know if this information has been helpful by clicking the thumbs up below.  If this post has solved your problem, then please click accept as a Solution.

  Kind regards!

• W520 waking up from his sleep by himself and to exhaust the battery

  Hello.

  I had a problem with my sometimes W520.

  The problem is, he awakens from his sleep by himself. I run the start > Sleep function in windows and wait for the led around the powerbutton fades in and out. Then a few hours later he apparently awake mode standby (even with the lid closed) and my battery is drained completely to 0%.

  Someone knows what may cause this?

  Go to a command prompt and type in
  powercfg - devicequery wake_armed

  It will list the devices that can cause the machine automatically adopt the fashion watches.

• Crush the display flashes for 2-3 minutes after that mini mac wakes up from sleep

  Crush the display flashes for 2-3 minutes after that mini mac wakes up from sleep

  If you have another Thunderbolt cable, plug it into the unused port on the

  Thunderbolt Display and then in the Mini and see if the same thing happens.

  What you can see is a precursor of the poster, built out of the cable.

  At least, it could eliminate a costly repair problem.  Although the cable itself is not

  expensive, opening to the top of the screen of TB to replace could be.

  Well that not connected on a Mini, I began to see in similar behavior my

  iMac, so that there was finally a break in the complete cable.

• Portege Z30 - Has is not awaken from its slumber

  One of our employees is using a Toshiba Portege Z30 - A connected to a DisplayLink Targus docking station. By default, our SOE configures power settings to do nothing when the lid closes. We have configured the laptop of this person to go to sleep when the lid closes if the notebook is on battery, and keep the default setting to do nothing if the lid closes when the supply network. About 6 weeks, the laptop has stopped waking up from his sleep.

  I don't know if the implementation of standby or try to wake up from its sleep occurred when it is connected to the sector or on battery only. What are some troubleshooting steps that we can take to help diagnose the problem? BTW, the key entry nothing on this forum site, using IE10/Windows7.

  The laptop does not wake up from sleep, open the lid or also by pressing the power button?

  What BIOS status?
  Is it already knows?

• Vista wakes up from his sleep by himself

  As the title says, my vista pc wakes up from his sleep by himself. Normally, he'll sleep for 10-15 minutes before you wake up. At other times, it is random and wake up in 2 minutes or 30 minutes. I looked in the forums of countless and tried the suggested solutions, but can not solve the problem. The only thing I found to keep him asleep is disconnected the network cable from the PC or unplug the network cable from the cable modem. I suspect some service or program he wakes up, but I have no idea of that. Here's what I tried:

  I used powercfg command-line command to see which devices have been enabled to wake up the pc. They were only the mouse & keyboard. They are all two peripheral cables usb. I unplugged each separately before you put the pc to sleep and he will still be awake. I use "last_wake" but I just get '0' and in the event viewer it says "wake source unknown.

  I made sure "allow this computer to turn off this device to save power" has been verified for the network adapter in the power management tab. I also disabled the option in the advanced NIC Properties. I also disabled it in the bios. After having done that and the pc wakes up is still what intrigues me the most when I don't know if I unplugged the NIC in the pc go to sleep for hours until I decided to wake up. It is wired not wireless.

  I have that 'sleep' lit. There are no hybrid sleep or hibernation available mode.

  It is vista business so I don't have a Media Center. Media Player is not enabled for sharing files on the network or to pick them up. Media sharing is turned off, and it's only pc's on my network. Also just in the 'media settings' box is configured to allow the pc to go to sleep in power options.

  I checked the Task Scheduler for tasks that can be set for 'wake up this computer' so it can work, but only one of them has this option. It's for multiple monitors and I unchecked the box and the pc wakes up still. I checked for hidden tasks, and the only one I found that could be the culprit was MS RSS. However, after the removal of this pc still wakes up.

  I don't have a sidebar option.

  Windows Update is set on notify me when updates are available.

  I also did a msconfig & selected 'selective startup '. I have uncontrolled startup programs. The pc is still awake.

  Tried to start the pc in safe mode, but there is no option of sleep available to test if it wakes you up from his sleep in safe mode.

  Last but not least is when the pc is wake up he's going to sleep again within 2 minutes.

  As you can see I tried everything I could think of without much success. Can someone tell me something again or that I have not tried?

  I have no idea what you're trying to do, but here's what I found my problem. I have a motherboard intel. Although I disabled "wake on lan" both vista & bios there was yet a 3rd parameter I was not aware of. He was set apart from the bios or vista. It is a framework of intel in the 'management engine interface' if I remember correctly. It is accessible after the bios option and before loading windows. Once I turned it off my pc stop, out of sleep. So, if you have a motherboard intel, then that is your problem.

• Computer wakes up from his sleep at night

  Hello

  I have a problem of disruptive reeally with my Windows 7 PC: he wakes up from his sleep to ~ 2 hours every night, I put it to sleep and it wakes up again between 3-04:00. Is it possible to limit this, or to diagnose what executable triggers this?

  Thank you
  Levi

  Windows performs many tasks during the night, including the work of backup, hard drives and other degragmenting.  These are usually the root cause of the alarms.

  You can begin troubleshooting by opening an elevated command prompt * and type powercfg /lastwake to see what woke up the last computer.

  * To open a command prompt, type cmd in the Start Menu, and then press Ctrl-Shift-Enter.

  If it was useful, you can vote by clicking on the green triangle. If it solves the problem, click on propose as answer. Thank you!

• Mac Mini is not boot from USB 3.0 external

  Hello

  I have an external clone (CCC) of my Mac Mini 2014. It does not start from him. HDs has changed, cables and external enclosures (TB and USB 3). Nothing.

  Boots from USB 2.0.

  Resetted SMC and LANDAU from different eras.

  TIA for any help.

  Simon

  2 ways:

  (1) USB 2.0 cable with external box 3.0

  2 cables) 3.0 with contacts gold - ed (should be hi quality cables)

• MacBook pro wakes up from his sleep since uptade

  My macbook pro 15 inches from the end of 2010 will not wake up after sleep since I've updated to the latest el capitan 10.11.5 system.

  The keyboard doesn't light to the top and rest of this way but the screen remains dark. Stop down and restarting is the only way.

  In addition, since upgrading my trackpad get slow sometimes and a click solves it. but its weird!

  any ideas? Thank you very much!!

  Could you please post an Etrecheck report? It is a perfectly safe way to give an overview of your current system: http://etrecheck.com

• T430s is not awaken from its slumber with mouse and USB keyboard Logitech wireless

  Hello

  My T430s is hooked up with a monitor and a keyboard/mouse (Logitech LX710) wireless.

  I put the laptop itself under my desk since I did not take it with me that often.

  Now, when I hit the sleep button on my keyboard, the computer goes to sleep, as expected.

  -There is no way (it seems) that I am able to wake up.

  I am running Windows 7 (x 64).

  I tried different USB ports (to make sure I use a motor) for Logitech wireless USB adapter.

  In the BIOS Setup, I checked to see if the USB ports can wake the computer from sleep mode.

  In the devices tab Manager keyboard (and mouse), power management, I enabled "allow this device to wake the computer". I did the same thing for the "Human Interface devices".

  "Update driver software" for the keyboard and the mouse says I have the latest drivers to install.

  In power controls of Lenovo, under Advanced settings, USB settings, I tried the USB selective suspend allowed many people with reduced mobility. They are disabled for the moment. Under global settings of power, I enabled 'always on USB"and"even when the computer is turned off.

  Then... I'm slowly running out of options. So for now, I can leave the computer at any time (it's what I do, with an occasional reboot - that seems not so respectful), or I can crawl under my desk in the morning, take the laptop on the little stool that I put there, make attention to diet, USB and cables monitor and external hard drives, open the laptop , press the power button, close it again and carefully put it back. What is bulky.

  So... what someone has ideas on how to fix this and leave my wireless keyboard to wake the portable computer?

  (Oh.. and of course buy a wired keyboard is an option, but not one I prefer...)

  I only have the mouse, but I have a T430s and a Microsoft wireless mouse to wake it. I always use the blue (USB3) port on the left side for all functions related to the startup, because I learned that the always active port (on the back) is started later in the process of turning the power on. Use the right-click button to wake it up, which is the function that was originally defined as one to this end, even though I believe that this movement of the mouse as she wakes up on a wired mouse.

• Display Manager does not start after Satellite A210-117 wakes up from his sleep

  Hello

  I have some difficulty with a Satellite A210-117 PSAELE-00E00MFR. I installed W7 x 64 professional and display driver ATI Catalyst to Radeon HD 2400.

  My graphics card appears in Device Manager as an ATI Mobility Radeon HD 2400 with the current version of the driver 8.970.100.3000 from AMD, and I can't find a better.

  So far, so good, but as soon as W7 goes into 'sleep' or 'hybrid sleep', the display manager does not re - start correctly. He keeps trying to display Windows, but finally the phone re boots.
  But if I put the laptop to 'Hibernate', then he wakes up fine.

  I don't know if this problem is known, because I can't find anything on the Internet on this subject independently to obtain the latest driver. Anyone an idea how to solve this problem?

  Thanks in advance

  Concerning
  Eric

  Post edited by: ebouge

  Hello

  On the page of the Toshiba UE driver (Archive), you will find drivers for Win 7 32 bit A210.
  Driver ATI 8.452 - 080109 is available too.
  Its a previous version and I recommend to test the unit by using this version of the driver