Display of shimmering red with Toshiba Portege S100

Similar Questions

• Dual HDMI display does not work with Toshiba still WT8

  Hi all

  I noticed that the duplication of the screens via HDMI is not possible with the Toshiba still WT8. There seems to be a recognized problem, however, my question is:

  Is it possible to manually operate?
  When released the drivers/fix at Toshiba?

  Thank you.

  The tablets micro HDMI to HDMI Cable port with Type D connector can connect.

  To select the display mode, you must go to:
  Control Panel (this can be found under System Windows Apps view)-> appearance and personalization-> display-> Change display settings-> avancΘs-> list all Modes

  Now, select one of the modes in the list all Modes

• Unable to start Portege S100 after the HDD with SafeBoot encryption

  I am trying to install the full encryption of the disk of SafeBoot (McAfee Endpoint) of 100 + laptops, which most is Toshiba. I use Device Encryption 5.1.5.0, liberation 5300 (515-0015) and I was able to install successfully on a number of different models of Toshiba, however, the Portege S100 causing me a problem. The customer of SafeBoot software installs OK on Windows XP SP2 (and SP3) and encrypts the drive as usual, but as soon as I restart it does not start again.

  Now, when I turn first I get:

  From SafeBoot v5.1
  Please wait...

  for a second, then a dialog box appears in the middle of the screen:

  SafeBoot error
  Error: 0xe002001b
  No boot disk was found

  He never does to SafeBoot screen logon is still in the start-up phase.

  I think it's because this laptop has a SATA RAID build controller. We do not use the RAID configuration and that you have an original disc installed. The BIOS is the latest version 1.50 and the third system configuration screen shows the status of RAID array to 1RAID-0. If I put it in JBOD so I can't even go as far as the Windows installation.

  So far I have tried to replace the Toshiba RAID with the Intel 82801FBM (ICH6M) driver SATA AHCI 7.0.0.1020 pilot. It works very well during the installation of Windows to step and F6 in Windows before encryption. I used even with the success of this pilot with a WinTech CD (updated the BartPE CD with SafeBoot plugin) and am able to see the encrypted drive. However, even with this driver, I get the same message once encrypted.

  I'm sure that my SafeBoot administration and deployment is configured correctly because the same works set of installation very well on a certain number of models different for laptop, but not this one.

  Any suggestion would be appreciated.

  Hello

  I m not an expert in SafeBoot software. It s I don't not known but I would like to say a few words about the RAID driver that you used.

  I think that it s a bad driver. It looks like a SATA driver and not the RAID driver.

  The Toshiba European page pilot provides a * 1.3.8.0 * v for the Toshiba RAID driver

  Please check this!

  I would recommend also consulted with the Portege S100 user manual.
  You will find details of the RAID.

  JBOD means no RAID settings. By using this option, Windows cannot be installed on this drive, except using the Toshiba DVD/CD product recovery

  Good bye

• I have loss BIOS password for my Portege S100

  Hello

  I have toshiba portege s100 I have password bios lost when I search on this topic, so I found a method that I pressed ctrl, teb and ctrl, enter my leptop screen shows s/n and challenge the code and system need response code but I know not means of response code help I need cod cod s/n response and the challenge is for the point ,
  PC serial No. = 36738792g
  challenge code = 7N67Y-YVDEA-XQ6VY-KMLCB-1F1ML
  response code =

  Thank you.

  Hello

  Unfortunately, no one here can help you with this. BIOS password is very important security feature, and it cannot be resolved in some public forums.
  This can be solved with only authorized service.

  Response code can be given only by Toshiba and they don't give it to anyone. Authorized service provider can only get it after checking if the laptop has not been stolen.
  Contact the nearest Toshiba service provider and they can help you wth this.

  Bye and good luck.

• Portege S100 - 7B code downtime when installing XP

  Hello

  I have a Toshiba Portege S100, I'm doing a fresh install of XP on it.

  Installing XP recognize the hard drive very well and has completed the installation of XP, but when it restarts I get a screen of 7 Blue b a few seconds after having reached the XP loading screen. I tried with a disc XP slipstreamed with the Toshiba RAID drivers added as well as the F6 during installation to add RAID drivers manually. Same result.

  I also tried to run the installation with the RAID JBOD unit and 1RAID-0, same result. I tried different hard drives and I also tried in other S100 (we have 4 here to get XP on.)

  I hope to get some fresh ideas on what it feels like I've been watching the same index of crossword 4 days if you know what I mean.

  Kind regards

  Danny

  > Installing XP recognize the hard drive very well and has completed the installation of XP, but when it restarts I get a screen of 7 Blue b a few seconds after having reached the XP loading screen

  I doubt that this BSOD can be linked to the RAID or RAID settings driver since the Windows operating system has recognized the HARD drive and the installation could be completed.
  There must be another reason why
  However, you can also try to disable RAID in BIOS as well and then you could check how the facility would be produced.

  What CD of Win XP did you use? This disc includes all service packs?
  It must contain the SP1 and SP2 min.

• Upgrade memory Portege S100

  Hello

  On the product page of toshiba for Toshiba Portege S100, it says that the maximum capacity of the laptop RAM is 2 GB. So I bought 2 GB of RAM for installation. However, there is only one slot available to increase the RAM (I think).

  The RAM that I got is a 256 MB module, and since my laptop has 512 MB of RAM, there must be another crack also. (After installing one of the 1 GB modules, I now 1.25 GB of RAM)

  How to install a 1 GB of RAM?
  Thank you

  Hello

  usually, if a machine has 2 expansion slots, then the other must be under the keyboard. So, if you want to install the other, try to look under the keyboard.
  But be careful: If you are not familiar with the disassembly of machines and if you have still warranty on machine to you, it would be better to give your machine a technician for the exchange of memory.

  If you can't risk a voiding your warranty if you still have it and you won´t run the risk of damaging your portege.

  Welcome them

• Cannot install Windows XP on Portege S100 series

  Hello!!
  Help, please!
  I have a Toshiba portege S100, I think that since 2005.
  I try for a few weeks to install a windows xp.
  This thing has become impossible for me. I tried hundreds of xp, but never work. He can't see the drive hard because I assume that the sata driver.
  Please, can someone tell me where I can find a workly raid driver.
  Thank you!

  Hi mircea,.

  It s not the driver SATA who is absent, but the RAID driver. OK it similar but just to be clear ;) s

  You can download the RAID driver from Toshiba's official website:
  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

  But to look for in * Archive * rather portable computer product category because it of older model so it s moved to Archive.

  Check this box!

• Portege S100 ATA HARD drive password issue

  Hey guys

  I just wanted to ask a quick question. I've owned a Toshiba portege S100 computer laptop for about 18 months and he's had a life constantly on hard lol and some stains of coffee etc. Unfortuantly it launched the bucket the other week, so I got out and got a new toshiba laptop :)

  My problem is that I can't access my hard drive? He had a password for HARD drive that I got and now I can't unlock it. I tried several tools to unlock the dam thing and wil it unlock NOOOO! Now, I'm an unhappy man, because all my work was there.

  I have a tool that has several options to unlock HARD disk utility? It requires a login and a tank to fill? I was wondering if someone can help me?

  TY in advance

  Zarren

  Hello

  Unfortunately, if the HARD drive password has been set and if you n t know the password you will not be able to unlock the HARD drive.

  To my knowledge, the HARD drive password can be deleted from the BIOS and any other disk HARD unlock utility will not work.

  In my opinion, there is nothing to my buddy :(

• Portege S100 Ultra Slim Bay HARD drive adapter take 2.5 HDD?

  As the title says really, think to add a second hard drive to my portege s100, but not sure if the Ultra Slim Bay adapter HARD disk can take normal 2.5 "HDD, or just the special Ultra Slim Bay HARD drive.
  Thank you
  Danh

  Hello

  First of all, you need to use the HARD drive adapter selectable right Bay which is compatible with the Portege S100.

  I found an and it seems that the HARD drive adapter Bay selectable PA3408U-1ETC is the right!
  Case Interface is serial ATA (SATA). And the Serial - ATA 80GB HDD Kit PA3407U - 1 H 80 must be compatible with the select Bay case

  Maybe you will take a peek here:
  Portege S100 details Options & accessories

• Toshiba Portege R500 - external display display problem

  At my work, we have a number of series laptops Toshiba Portege R500. All laptops are home in a Toshiba Slim Port Replicator II. Laptops are all running a version of Windows XP Professional with Service Pack 2 applied (and of course a few customization business).

  The problem is with the display on the external monitor. The laptop starts according to the normal and connects to the fine. The Fn + F5 key and so we can switch between the external LCD screen and the laptop monitor. We can also extend the desktop on the external monitor without problem.

  The problem is that when the disconnection of the laptop computer to the port replicator, when the laptop is brought back, the display of the external monitor does not display anything. The monitor receives a signal that we don't get errors about "cable disconnected" etc. By bike by Fn + F5, the monitor will go to sleep (as the adjustment is only to be on the laptop screen). By pressing Fn + F5 again, the monitor seems to wake up but there is no display on the external monitor.

  The only resolution we have found because so far, it's to stop & restart the laptop and the external screen works again. However detach and the problem occurs again.

  Thought this might be a driver problem or a problem of Toshiba Utilities, so have updated the drivers accordingly. The drivers installed by default are the Intel 945 Express 6.14.10.4837 driver version. I tried to update the drivers for the next version (using drivers from the Web from Toshiba site) and changes to the version of the driver 6.14.10.4631. I also tried the Intel driver version 14324.

  I also installed the Toshiba screen utilities and shortcut keys to see if this may have an effect, but unfortunately not. I also tried to change the BIOS settings for the display of 'Automatic Selection' to LCD + CRT RGB, and once again it has no effect. I also tried several configurations in the "display settings" does not.

  Is this just a design problem? Is anyway to fix that?

  Hello

  I Portege R500 in front of me with the same port replicator and 21 "Toshiba TFT display (connected to the DVI port on the Port Replicator).

  Please open "Toshiba Mobile Extension" utility (you can find it in Control Panel), then click on the second tab > change of display service.
  If please activate this service and choose your preferred display output.

  I tested it 10 minutes ago and it works perfectly.

  Good bye

• Toshiba Portege 3505 with addition of XP tablet, the cursor is moved and menu drop-down window opens intermittently

  My cursor is moved to the left of the screen, then a drop down window opens to display an element of right mouse drop-down window. It is intermittent in the duration and doen not always happen.

  I've performed on a toshiba portege 3505 with addition of windows xp tablet with all security updates. I tried maleware.org and run ms security essential.

  Pleaes tell me what I have and how to get rid of this bug.

  David

  It really doesn't look like a malware problem as much as you have scanned with MSE and Malwarebytes and found no problem.

  You can see this thread: http://answers.microsoft.com/en-us/windows/forum/windows_7-desktop/menu-appear-to-the-left-of-my-cursor/4287cf85-42fe-4b49-92c6-bac01f007a6d

  Good luck...

• Portege S100: Impossible to install Toshiba SD Host to use Toshiba Bluetooth SD Card2

  I try to install the Toshiba SD Card2 on my Portege S100 Bluetooth but I can't make it work, I get the error
  "Cannot open the device Bluetooth ACPI (tosrfec.sys) driver. (Try again)?

  which suggests that the SD slot is not reading the card. Then, I went to the Toshiba bluetooth section and find the driver files for the Toshiba SD host controller driver (http://aps.toshiba-tro.de/bluetooth/). I think I should install this like the host controller driver and compatible SDA Standard SD Host Controller.

  However, when I try to update the driver, by specifically selecting the folder of the Toshiba host controller driver, it is said that he could not find a better match that already installed. Therefore, I decided to install it manually, but instead, I get the error
  "The specific location contains no information about your hardware.

  I'm running out of ideas, can someone help me please?

  Thank you

  Concerning

  Danh

  Hello

  I don't really know what the problem is here, but I can tell you that you need to use the USB for BT solution, installation is simple and after a few minutes, you can enjoy connectivity BT.

• The Portege S100 graphics card problem?

  I have a Portege S100-S113TD, and I was watching a youtube fullscreen video, when the screen went suddenly full of horizontal lines and the laptop became unresponsive - I had to physically hold the power button for about 10 seconds turn off.

  Now it turns on but I only have a blank screen - it is the graphics card?

  If so, can anyone suggest where I can buy a replacement graphics card?

  The current one is a nVidia GeForce Go 6200TE 64M / 128 M 6600TE - I tried looking for one, but perhaps they are now obsolete.

  Any help would be greatly appreciated.

  Hello

  > Now it turns on but I only have a blank screen - it is the graphics card?
  It seems that Yes

  But you are able to test the laptop with an additional external monitor?
  If possible, connect the external monitor and press Fn + F5 to check if something would be visible on 2nd screen.
  If photos on 2nd screen would be visible, then the GPU is OK and only your internal display is faulty.

• Need drivers for my Portege S100

  Hello

  I have notebook, Portege S100 model: PPS10E-o1t019en
  On the www, I can't find this model and the pilot...

  Please help me.

  Where can I find it?

  Mark

  Hello

  The problem is that Satellite S100 has a RAID controller, you the RAID driver XP can detect the internal HARD drive.
  As wrote Feliks you can download the from the official page of Toshiba under Archive.

  Either you create a new drive bootable XP with RAID driver or you load them from external floppy drive.

• Portege S100: How to change the RAID in the BIOS

  Change the BIOS setting for Portege S100 of JBOD to RAID0, I hit space on Exectute creation and enter the key of type string in the manual, and press "enter".
  Settings and then return to existing arrangements and not the new RAID0 configuration setting that I selected.

  I stayed in this part of the day / night looking at different positions, but I don't see anything wrong with the data entered.

  This is the same as that recorded in this link: -.
  [How to change the RAID configuration | http://aps2.toshiba-tro.de/kb0/TSB6901K60006R01.htm]

  I'm now at the end of my home, I just wanted to install new HDD WD and new installation of XP Pro, is - it too much to ask?

  Maybe it s a silly question but; have you installed the second HDD to the Ultra Slim Bay?
  The RAID did feature is available when a second HDDD is installed in Ultra Slim Bay.

  If the second HDD was inserted and then change the RAID in the Windows operating system.
  There should be a Toshiba RAID Console.
  You can use this console to create or manage a RAID array.

  To start the utility, click Start, point to all programs, point to Toshiba, RIAD-tap and click RAID console.
  It of possible to change the RAID1 (mirroring) of a configuration non-RAID (default).

  But note; When RAID1 is set, you cannot change your settings unless you completely restore your preinstalled software.