Display or a compatibility issue

Similar Questions

• change the display LCD R60 - compatibility issue

  Hello I need to change my 15 "R60 sxga display, as it is used is dying. After searching some information on screens thinkpad I'm confused. Thinkwiki mentions R60 has LG - Philips LP150E07, but I am unable to find such screen. So I wonder if LP150E05 (probably LP150E05-A2K1) of the N150P3-L01 of T43 T60 will work without problems. I have found that to replace poster may nequire the EDID Flash, but I don't know how I could do and where to find the needed firmwares. Could someone enlighten me on this?

  LCD for R60 will work in the T60, while the LCD from the T43 only works in the T60 with a mod EDID.

• I'm unable to access webmail on TalkTalk (formerly Tiscali) using Firefox 5.0 and TalkTalk tell me there is a compatibility issue?

  I have not had any problems with my previous version of Firefox and I can access my Tiscali/TalkTalk webmail using the latest IE browser. I am connect but cannot access the contents of the mailbox. I asked TalkTalk on the problem they have stated that "If you are unable to access the mailbox using Firefox version 5, so I want to inform you that there is compatibility issue with Firefox version 5 and webmail of Talk Talk, thanks to which you found the error above. Alternatively, you can try to uninstall the latest version of firefox, and then reinstall the earlier version to settle the case. "Can I assume that these difficulties will be resolved between you? I would prefer to use Firefox and do not wish to go back to IE.

  Apparently, TalkTalk mail will work with Firefox 4 and 5 of Firefox If you set the browser are to TalkTalk mail saying that you always use version 3.6.

  You can find instructions for this in a post on the forums of TalkTalk: Firefox 4 & TalkTalk webmail - Forums.

  Note: when you open about: config the first time, it will display a warning message that you have to be careful with changes that you make. It's certainly good to keep in mind.

  It work?

• Hotfix v upgrade for the compatibility issue for epowertray?

  A solution was published after the problem of compatibility below message appeared on 13/03/2013.  My laptop don't is not on the list was updated 'solution' suggests a fix provided instead of an update.  A fix is safe and reliable as a real update?  Thank you.

  This program has known compatibility issues

  Check online if solutions are available from the Microsoft Web site. If there are solutions that Windows automatically displays a site that lists the steps you can take.

  Acer Updater program

  Acer embedded editor

  Location c:\Program Acer ePower Management\ePower Tray.exe

  Update Acer has a compatibility issue with this version of Windows. For a compatible with this version of Windows Update, please contact Acer Incorporated.

  OK, posted this question too early.  I have seen another post where Acer has said to go ahead and use the fix.  Download now. Never mind.  Thank you.

• The driver is blocked due to compatibility issues.___Driver: Tages Protection__Publisher: Tages SA___I want to delete this driver. __

  I recently installed a video game (The Witcher) to my computer that has also installed drivers Tages (some anti-piracy software).  I am running Windows 7 Professional 64 bit.  The game does not run on a 64-bit operating system.  I uninstalled the game, but whenever I start Windows I get an error message saying that the Tages driver is blocked due to compatibility issues.  The Tages software does not appear in programs and features or in the list of drivers in the Device Manager (I also tried to change the display to show unused drivers and it still does not show).  I want to delete this driver.

  This is a bug with a fix.  For a long time I played the game and visited the forum so I know more exactly details.  But I run Windows 7 Ultimate 64 and the game works fine.  Also, I can confirm that it works well on Vista Ultimate 64.  Go to the official forum of The witchers to seek a solution.

  http://TW1.thewitcher.com/forum/index.php?Board=14.0

  Here's the question I asked about the order of installation to play the game.

  http://TW1.thewitcher.com/forum/index.php?topic=30402.msg5444714#msg5444714

  As you can see, you are supposed to remove Tages.

  See here for more information.

  http://Witcher.Wikia.com/wiki/1.5_patch#Download_links_.28Patch_1.4_.E2.86.92_Patch_1.5.29

  Alternatively, you can go here to remove Tages.

  http://www.tagesprotection.com/main.htm?page=minimum.htm

  The system error prevents you from the operating system correctly?

  I hope this has helped.  :)

• This program has known compatibility issues when I try to install sql server 2008 in windows 7 X 64

  I use windows 7 (X 64), and when I try to install sql server 2008 I have this message & can not install it:

  ""

  This program has known compatibility issues:

  Check online to see if solutions available on the microsoft website ara, if we find solutions, windows will automatically display a Web site that lists the steps, you can take.

  Program: Microsoft sql server 2008

  Publisher: Microsoft

  When the sql server Setup program is finished, you must apply the service pack of sql server 2008 1 (SP1) or a later service pack before you run sql server 2008 on this version of windows

  Looking for online solutions run program cancel

  ""

  And I check online for solutions & recommended program installation, but also the same message appear, so please help me, how can I fix

  Hi DoudyEwais,

  1. How do you try to install SQL server 2008 on the computer?

  2. did you of recent changes on the computer?

  I suggest that you try to install the program using compatibility mode by running the program compatibility issues

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  List of known issues when you install SQL Server on Windows 7 or Windows Server 2008 R2

  http://support.Microsoft.com/kb/955725

  If the previous step fails, then after your query in the SQL server forums by using the link below.

  SQL Server forums

  http://social.msdn.Microsoft.com/forums/en/category/SQLServer/

• Having major compatibility issues with Adobe, Mac Yosemite and Wacom Cintiq programs companion hybrid.

  Since I upgraded my Mac iOS Yosemite, my Adobe CS6 programs do not work well at all. They start very well, but the menu windows acting weird, often forcing me by dint leave whenever I try to do something. I downloaded programs CC trials and some may work better for me, but most have similar problems when I try to use on the Wacom. I'll explain my setup, and exactly what is happening...

  I own an iMac end 2012 model (the one without the cd player) and a Wacom Cintiq hybrid companion that I use as a secondary display design. The screen Wacom is under my iMac in the settings screen, since my Wacom rest below the iMac screen. Think Nintendo DS... like how the lower screen is touch screen... same deal here.

  When I open Photoshop CS6, CS6 Illustrator or even Illustrator CC and move them on my Wacom screen, the 'new' window is aligned with the top of the screen, cutting off buttons and options I need. I can't reposition the window because the upper part is necessary to move it. In the case of the window 'opens', it does not at all appear, but it blocks my program. It is as if he wants me to cancel the open window, but the window is not on any screen. That's when I have to force quit. I also noticed that sometimes it seems you have a 3rd office every time I enter the mission control afterwards. I have no idea why this is so.

  The only option that I know to get around these problems is to put my screen on the mirror and mirror of the iMac screen mode, but not only I have to go into settings and recalibrate my pen, whenever I want to use these programs, but it's a major drawback when I fight for space on my screen since I was only 1 working with this mode. And just to be clear that CC Photoshop works perfectly for me. No compatibility issues he Fortunately, but if it works well with my setup, then why don't the others. Worse yet, I don't know who is at fault... What is an Adobe problem, a problem of Yosemite or a problem of Wacom... I do not know.

  Yosemite sometimes has problems, often related to the 'default' permissions that need to be changed

  -solution https://forums.adobe.com/thread/1689788 of a person

  -http://blogs.adobe.com/creativecloud/creative-cloud-and-yosemite/

  -https://helpx.adobe.com/x-productkb/global/mac-os-yosemite-compatability.html

• Satellite M70 with Vista - TCtrlIOHook.exe is blocked due to compatibility issues

  Hi guys,.

  Hoping I can pick your brain. I have the Satellite M70 and have (I think) installed most of the new drivers for Vista... but when I boot up I get "this program is blocked to compatibility issues" blah blah blah..., then says that he has

  Toshiba utility programs
  Publisher Toshiba
  Location C:\windows\system32\TCtrlIOHook.exe

  Can anyone of you tell me please
  one) where I can get a driver to solve this,
  (b) stop this message that appears whenever I start

  Thank you

  Kian

  Hello

  The TCtrlIOHook.exe belongs to the TOSHIBA Hotkey Utility control.
  All this FN keys needs to control the software and TOSHIBA Hotkey Utility is necessary if you want to use the function of the FN keys.

  (A) If you didn t find these utility for Vista on the Toshiba page then it seems that Toshiba don't provide this software for Vista for the M70 laptops.

  (b) If you want to stop the message appearing at the beginning of the boot process, you must remove it from the OS or you will prevent loading software!
  This can be done in the registry. You can remove entries from the RACE
  EntVersion entVersion\Run

• Windows 10 compatibility issue (IdeaPad Z510)

  Hello

  Compatibility issue tracker Windows 10 says that I meet problems with:

  • Bluetooth audio
  • Bluetooth AVRCP (Qualcomm-Atheros Communications) device
  • Support Bluetooth virtual (Qualcomm Atheros Communications)
  • LWFLT Bluetooth Device (Qualcomm-Atheros Communications)
  • Replacement cable Server Bluetooth Hadr copy (Qualcomm Atheros Communications)
  • Bluetooth Server (Intel Corporation)

  Receive updated drivers?

  See you soon,.

  Yann

  yannbrrd wrote:

  Hello

  Compatibility issue tracker Windows 10 says that I meet problems with:

  • Bluetooth audio
  • Bluetooth AVRCP (Qualcomm-Atheros Communications) device
  • Support Bluetooth virtual (Qualcomm Atheros Communications)
  • LWFLT Bluetooth Device (Qualcomm-Atheros Communications)
  • Replacement cable Server Bluetooth Hadr copy (Qualcomm Atheros Communications)
  • Bluetooth Server (Intel Corporation)

  Receive updated drivers?

  See you soon,.

  Yann

  I think that the trend with Microsoft, is that it will strive to offer its own drivers for your unit.

• CAN the c series modules and drivers XNET and Ethernet expansion chassis cRIO compatibility issues

  Hello

  I encountered a problem with my current setup which was not picked up by the tool advise cRIO or by the engineer of applications OR that we used to check our configuration before starting the project.  It turns out that the NI 9853 CAN modules require a XNET driver that is not compatible with the NI 9149 expansion chassis.

  We currently have a system with a cRIO NI 9068 with general IO and some CAN controller and CAN open modules in a carrycot and an Ethernet NI9149 with more general IO expansion chassis and more CAN and CAN open an another pod remote modules and all of this should work under water, so I can not move the modules of the expansion chassis to the chassis controller without a lot of overhaul of the system and equip and a team of angry engineers and technicians.

  I have developed the FPGA code for the 9068 OR and have CAN and CAN open networks works with happiness.  Then I tried to copy the same FPGA code on the expansion chassis and it compiles, but when I try to launch it I get the error-63184 code.  After long calls OR support, and tries to install the missing drivers on the expansion chassis, we discovered that XNET is not compatible with this chassis.

  Can anyone suggest the best course of action?  Is there an expansion chassis Ethernet that will support XNET?  I have here no information online about this compatibility issue that I can't find?

  I'll be communication with DIRECTLY, but from previous experience of the "odd" questions, I know the community often hold the key.  Any suggestions gratefully received.

  Thank you, Ed

  It's official.  CAN open modules are not compatible with the expansion chassis.  I have them moved to RIO and will get the upgraded pods.

  Thank you

  Ed

• When installing ha6 on windows server 2008 R2 compatibility issue

  Hi, I want to install Virtual Studio 6 on windows server 2008 R2 (to run our legacy code). I encountered the problem of compatibility: "virtual studio has a compatibility issue with this version of windows.

  I tried the steps below:
  1. right click on "setup.exe" and select "Run as Administrator"
  2. run in compatibility mode, such as windows XP sp2.
  It does not, someone who can help on this? Thank you!

  Hi Weihe,

  The question you have posted is related to the Virtual Studio 6 installation on windows server 2008 R2 and it would be better suited to the TechNet community.

  Please visit the link below to find a community that will provide the support you want. http://social.technet.Microsoft.com/forums/en-us/windowsserver2008r2general/threads

  Hope it will be useful.

• ENVY of HP dv7 Notebook PC: Windows 10 compatibility issues

  I want to be the new operating system Windows 10. Apparently, this is going to be a compatibility issue with my laptop. I have the AMD Radeon HD 7640 G graphic card. It seems that Windows 10 do not like it. How can I fix this problem before the release date in July? Thank you.

  This is a preliminary read Microsoft and won't say there are problems that can be supported with the official version.  Just be sure that you have the most recent driver for now.

  Win 10 drivers will be released by the factory eventually so keep not prevent you to Win 10.

• DLA blocked due to compatibility issues

  DLA blocked due to compatibility issues

  How does this relate to the functionality of windows update

• VI compatibility issue

  Good evening everyone,

  I recently worked on labview 2011 and this morning my laptop crashed! fortunaltely I kept my job vi on external hard drive

  the problem is that the laptop I'm working on that now has labview 2010 version installed so my vi did not (compatibility issue)

  i'would always be greatfull if someone who has the version of labview 2011 could open my vi and save it with the 2010 version and send it to me.

  Kind regards.

  PS attached below the main vi ' final series UART Frid "with two sub vi" read part & write the part. "

  You can go there.

  Hmm... Let me know if you get any problems. In addition, there is a thread separate available for this conversion VI. Next time post your VI in this thread, if you want that all conversions.

• I just bought a new LG monitor. Photos open in Microsoft Live Photo are green. Is there a compatibility issue?

  I wonder if there are some compatibility issues with monitors LG and Microsoft Live Photo Gallery?  One of my photos that I opened with Photo Gallery is all green.  LG assured me that it is not the monitor.  I opened a couple of other photo programs and photos look good on those.  I use Microsoft Photo Gallery most of the time, and it's embarrassing.  Anyone have any ideas?

  Run Microsoft Fixit

  Microsoft has a range of automatic programs to solve common problems. For Windows Photo Gallery, see problems

  http://support.Microsoft.com/mats/windows_photo_and_slideshow_diag/en-us

  For the visit of the list the most comprehensive

  http://support.Microsoft.com/FixIt/en-us

  When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.