Display problem - Photoshop useless with Dell XPS15

Hi I ve recent'y bought a Dell XPS15 designed for graphics, but Photoshop screen is too small (useless). It is very good with illustrator and indesign. Any solution? I've seen I'm not the only one like this. Thanks a lot for your help.

Try this:

Adobe App scaling on the screens to high-resolution (FIX) | Dan Antonielli

Tags: Photoshop

Similar Questions

Battery, not supported by the system and the display driver stopped responding with Dell Inspiron 1564 laptop

Hello

I had my laptop dell inspiron 1564 about two months ago and today when I turned on my laptop a message appeared on the screen the battery is not supported by the system . Can someone guide me through this question please?

I have another question as well... the second day of my purchase of this product, that the screen is empty, n when I tried to turn on the key to the power of the laptop, a message appeared that the display driver has stopped responding earlier and it happened recently in a few days back as well. I will be very happy if someone can help me please on these two problems. In the hope of a solution in due course.

Thank you

Amira.

2 months old?

It is under warranty.

Contact Dell and file a claim of guarantee on their records. as it may be the precursor of coming problems with it.

http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_technical_support

See you soon.

Mick Murphy - Microsoft partner

Display problems using Firefox with Windows 7, 64-bit

Hi support them

I have a new desktop computer running Windows 7, 64 bit.
When I use Firefox version 3.6.8 to view my Web site, it displays everything out of alignment.
If I use IE 8.0 it shows very well.
If I use my laptop which is running Win XP site displays fine with IE 8.0 and Firefox.
So I guess it may be a problem with Win 7, 64 bit and Firefox work well together.
Is there a ready solution to help solve this problem or I have to wait until Firefox came out in a 64-bit version?

Reset the page zoom on Web sites that have bad air: "view > Zoom > Reset" (Ctrl + 0 (zero))

See http://kb.mozillazine.org/Zoom_text_of_web_pages

See also the font size and zoom - increase the size of web pages and font size and zoom - increase the size of web pages and change use the sites of fonts and colors

If you increased the minimum font size then try a lower setting (default is none) as too high can cause problems that you described.
```
Tools > Options > Content : Fonts & Colors: Advanced > Minimum Font Size
Tools > Options > Content : Fonts & Colors: Advanced > "Allow pages to choose their own fonts, instead of my selections above"
```

Problems Photoshop CS6 with El Capitan

I just upgraded my iMac and I now use El Capitan. I want to continue to use Adobe CS6, Illustrator seems ok so far, but Photoshop is pretty sticky, and many of the keyboard shortcuts are not working do not, or only work occasionally. Does anyone know a fix for this? Thank you very much.

The common solution (which works most of the time) after upgrading to El Capitan is to uninstall the CS6 applications and reinstall them.

Display problems with all types of terrain and graphic

Hello

I have display problems general with all types of chart, graph or plot that I try to use, on two different machines, both with NVIDIA graphics cards. A machine is a MacBook under XP SP2 in bootcamp and the other a Dell T3400 workstation (or something similar) under XP SP3.

I posted this thread earlier which Ben replies to the weird graphic behavior. Ben suggested that I try to simplify my code as much as possible while keeping the bad behavior and by submitting to the NC and the forum, because it is others have had problems of graph. I tried, but in vain. Display problem continues and continues and continues and then they just go and I can't get back by unscrewing the last stage of reduction or simplification of code. But at some point during the reconstruction of the code, which I cannot determine, returns the bad behavior.

So, I was set up with graphics looking for shit, until recently, when I thought I'd try some suggestions of other messages to a XY-plot function as a graph by creating a buffer and using nodes of ownership of land for the range control. Things seemed promising, until my "XY table" started getting shit, too. This time, the issue was with the grid lines becomes all chopped, attached images.

I am out of resources here. I think I'm running out of options to display graphic data in an acceptable manner. Do I have to display data by using an Excel chart in an ActiveX container in Labview? I'm not skilled enough to do it again. I like Labview, it is the only programming language that I am competent even remotely help, but it's just inferiorating.

Any suggestions would be much appreciated. Thanks for reading.

-Greg

Greg,

is there a particular reason why you use the bar plots - view superior graphic style? Try activating the legend of the plot, go to the bar plots and select the first track of the Bar Style. Your chart is displayed very well after that.

See you soon,.

Cerati

Is anyone has problems with Dell support - called using micro

Hello users of the Forum.

My 2720 xps is not save anything when I use the microphone jack and little record (low volume) anything when I use the microphone. I also have questions about the use of large screen XPS2720 to extend my laptop screen using HDMI from laptop HDMI in the XPS. It does not either. Here is my support issues:

1 has reached the customer. The person would put me on hold for each 2 questions simple and "research". His answers were vague, and then he said he would transfer me to Office work support as he has managed "inspiron" only! His transfer has failed and abandoned call.

2. calls on the customer. Voice was smothered at the other end, when I mentioned, so the call dropped!

3. calls on the customer. The person could not understand what I was trying to make (connect laptop XPS display and audio not sent / mic jack question), he tried to understand the question but kept in interpreting everything that I said mean that I was trying to extend the XPS specification to a monitor. I asked to speak to someone who knows the best product, he informed that he will put the prime contractor, and the abandoned call. Now I'm wondering if there is another meaning to call down when Dell is unable to answer.

4 called again, the first person who I arrived before also picked up my call, when she heard what I was looking for the resolution, the call dropped.

I don't know what is happening with Dell technical support. I would like to know if anyone else had experiences similar to my problems, especially when Dell support is unable to successfully respond to the question. I really prefer to talk to actual dell support person in the United States (instead of people at offshore call center) to get answers to my questions. I tried to download the XPS manual and the link led me to a PDF doc, which indicates that it is the manual of the user, but everything, it's a manual to pay off the system - open lids, replace chipsets, back cover, display etc.. !! Frustrating :-)

As Mary said, there are 2 ports HDMI on the XPS 2720. If you try to view the screen of the laptop on the XPS 2720, you must use HDMI-In port on the back of the specification XPS (#14 here).

There are also press the input source selection button (#9) to select the input source. It may take a couple of presses until she "cycles" through all the choices and sees the laptop. So, wait a few seconds between the push to give him a chance to change the input source.

And you should probably also go into Windows Display options on your laptop and make sure that it is set to use a second monitor...

EDIT: Link fixed

having display problems with my macbook air, first version of 2015. When I turn on my macbook, after boarding the password, then press on enter three lines (not really they look more like flashes coming from the top of the screen appear) in

having display problems with my macbook air, first version of 2015. When I turn on my macbook, after boarding the password, then press on enter three lines (not really they look more like flashes coming from the top of the screen appear) in the colors Blue, green and red.

also when I turn off my laptop just until the display on the top of the screen that is 2 and a half inch thick green line appears and goes about a second.

help someone?

Thank you

Howdy Yaser of zoysia,

It seems that your screen displays some graphical anomalies when you connect to your user name. I would use these troubleshooting steps in the following article on the resolution of screens:

Restart your Mac in safe mode to reset the default display resolution.

If booting safe mode doesn't resolve the problem, reset your Mac NVRAM and SMC to reset the video ports on your Mac to their default values.

From: get help with graphics issues on external displays connected to your Mac.

Thank you for using communities of Apple Support.

External monitor display problems with Dynadock U10 on PC Toshiba laptop Win7

I just started with my current compnay and they allocated me a new from Toshiba Satallite laptop running with Windows 7 64 - bit operating System.

They hooked me up a Station of reception Dynadock U10, separate keyboard and a mouse and a monitor external 22 ".
I experienced a problem of compatibility with some software, but I currently have a major problem with slow internet pages freezing or general display issue when the VGA is connected to the docking station.

The laptop works fine when the VGA is connected directly to the laptop. I have download the recent software/driver upgrade loaded 18 (TC30322400A) without fixing the problem.

I also loaded the upgrade diplaylink 5.6.31548.exe, as mentioned in other forums, once again, without success.

Any help would be appreciated.

Alex

Are you using the latest driver?
In my opinion you should not update BIOS.

Display problems with the Portege R600 and Win 7

I have a R600 running windows 7, every two minutes, I have a display problem where where the vertical pixels seem to get every centimeter unaligned, so my screen seems to blur digital in bars across it.

I have an external monitor attached and get the same problem with or without him. I have tired the driver of toshiba and intel driver.

It seems to go away if I have windows min and max, but sometimes it doesn't. If I run my mouse an affected area, that it seems in trouble and sometimes it's not all screen.

A refresh solves it.

Anyone have any ideas?

> I have an external monitor attached and get the same problem with or without him.
Maybe I m wrong but in most cases if these symptoms are seen on the two displays (internal & external) then a graphics chip could be affected
It would be the worst case, because that would mean that the motherboard needs to be replaced

But just a question; have you noticed that using the previous Windows OS preinstalled by maybe Toshiba (Win XP or Vista), you must install the image of Toshiba again to verify if this display problem is still visible

Windows 7 Home Edition Premium and Linksys E3000 and configuration problems with Dell/Broadcom half mini wireless 1501 wireless adapter DWLAN

I'be been on the net looking for an answer requarding my Linksys E3000 router and my card adapter Mini PCI Dell/Broadcom DWLAN (DraftN) haf installed on my laptop Dell Inspiron N7010 XL 17 R and the inability to configure the card so he gets the same speed-172 wireless MBps_ as does our HP Vista Home Premium SP2 Laptop and Desktop! Yes, I spoke with Dell who seem to think that all their problems Tech and resolutions can be found with their technicians of the Manila-based Super (Word of warning-do NOT enter into the world of the concierge program of Dell Tech who, after having been assured it is based in the United States, I agreed to be a beta tester and lost my harddrive despite numerous attempts to stop the technicians to access remotely to do stupid things - but the new live Webcam and learn the hard drive but got none of my software original Dell with it as promised, too - another story). In any case, after playing with the DWLAN share of Dell said they question-nope Linksys ' cuz of course my other two computers would be quick at the speed they do. So I get ahold of Comcast, who of course told me, it's a matter of DELL. I have the WPA2 encryption on a network secure, but because my router there is no way to set up a "secure" network guest unless I have disable access to him (seems odd, he says: it is not guaranteed when someone trying to pass over the network, has knowledge password-weird with this router) it is anyway with this mini half DWLAN and the fact that it is not near the speed as the two other wireless adapters. My problem is with the speed I found all kinds of tips for use between Comcast Modem and Linksys router to make your network hum. What I want for now is someone to tell me how to configure this adapter on this Dell computer, so it does the job, it should. I have a program of diagnosis with her and from what I see, I must get off channel 1 as there is too much interference, but before I go and change the settings of the router, I want the adapter to work - especially since it's about 100 Mbps slower than our other wireless adapters. Does anyone know what should be the correct settings for this DWLAN 1501 or that I now need a new adapter in this laptop as well? Thanks for your help.

LindaSView

Hi Linda,.

Have you tried to forget an instant wireless and bypass the router and cable connect directly to the modem to see if you get the speed you want in this way? Yes, I know that this means to temporarily suspend the internet connection to the local network and also means the creation of a special no wireless connection for this computer. But it could help determine if the problem is the computer and the router or wireless adapter - which excluding at least.

If it works fine, then you can pass the wireless problem. Otherwise, if it is still slow with a direct link, then you may need to consider another problem is involved and the router and adapter can actually be very well and you need to focus on all that is the bottleneck.

I'm suggesting this to eliminate the possibilities that can be the underlying cause, while you spend your time on the development of bad (although I admit that I think that you are right and it is more likely - it can be useful a test just to be sure).

Good luck!

Kosh

Problems with Dell r.620 updated

Today, I tried to make 3 x updates 3 Dell r.620 as follows:
- BIOS 2.4.3 to 2.5.2
- 16.0.24 to 16.5.20 Intel NETWORK card firmware
- iDRAC Firmware Version to 2.10.10 (iDRAC settings rest 1.65.65.04 Version)
All 3 of r.620 had identical firmware for starters.

I applied updates for 3 r.620 systems at the same time through iDRAC Express Web GUI update mechanism.

On the first 2 systems, the updates worked fine.

On the last system, I'm in trouble. When I came back to this system, he has been "priming" and say "entering the lifecycle controller...". "but after half an hour, it does not! I noticed that whenever I would it boot, he'd do the same thing... "Entering Lifecycle Controller"... then when it is arrived until the moment where Intel Boot Agent initialize, there are two points, then a blank line... then the machine would just stand there.

Through racadm, I managed to reset the State of the life cycle of the inverter and remove the queue of work hoping I could reflash just updates and everything would be fine. Now, the system does exactly the same thing, except that it does not seek to enter the controller of life cycle more. Now, when he's sitting there, he is not "completely" hooked - in other words, if I hit F2 it will say that it is entering the system setup, press F10 he'll say he'll perform a PXE boot... etc... in fact, you can hit all the F keys and he'll say he'll enter system configuration , PXE boot, enter BIOS Boot Menu, etc...

I am suspicious it is necessary with a failed NETWORK upgrade card... Here's what I see in the racadm for BIOS swinventory:

-------------------------------------------------------------------

ComponentType = BIOS
ElementName = BIOS
FQDD = BIOS. Setup.1 - 1
InstallationDate = NA
Version Rollback = 2.4.3
-------------------------------------------------------------------

ComponentType = BIOS
ElementName = BIOS
FQDD = BIOS. Setup.1 - 1
InstallationDate = NA
Available version = 2.5.2
-------------------------------------------------------------------

ComponentType = BIOS
ElementName = BIOS
FQDD = BIOS. Setup.1 - 1
InstallationDate = 2015-03-12 T 12: 49:29Z
Current version = 2.4.3
-------------------------------------------------------------------

Hmmm... Current version seems to be 2.4.3 with AVAILABLE version 2.5.2. (which is strange as when starting the machine, it reports the 2.5.2 BIOS)

and for the NETWORK card:

-------------------------------------------------------------------

ComponentType = FIRMWARE
ElementName = Ethernet Intel(r) 10 P 4 X 540/I350 rNDC - B8:CA:3 A: 69:3 A: 62
FQDD = NIC. Integrated.1 - 2-1
InstallationDate = NA
Rollback Version = 16.5.20
-------------------------------------------------------------------

ComponentType = FIRMWARE
ElementName = Ethernet Intel(r) 10 P 4 X 540/I350 rNDC - B8:CA:3 A: 69:3 A: 62
FQDD = NIC. Integrated.1 - 2-1
InstallationDate = NA
Available version = 16.5.20
-------------------------------------------------------------------

ComponentType = FIRMWARE
ElementName = Ethernet Intel(r) 10 P 4 X 540/I350 rNDC - B8:CA:3 A: 69:3 A: 62
FQDD = NIC. Integrated.1 - 2-1
InstallationDate = 2015-03-13 T 10: 50:01Z
Current version = 16.0.24
-------------------------------------------------------------------

ComponentType = FIRMWARE
ElementName = Gigabit Intel (r) 4 p X 540/I350 rNDC - B8:CA:3 A: 69:3 A: 64
FQDD = NIC. Integrated.1 - 3-1
InstallationDate = NA
Rollback Version = 16.5.20
-------------------------------------------------------------------

ComponentType = FIRMWARE
ElementName = Gigabit Intel (r) 4 p X 540/I350 rNDC - B8:CA:3 A: 69:3 A: 64
FQDD = NIC. Integrated.1 - 3-1
InstallationDate = NA
Available version = 16.5.20
-------------------------------------------------------------------

ComponentType = FIRMWARE
ElementName = Gigabit Intel (r) 4 p X 540/I350 rNDC - B8:CA:3 A: 69:3 A: 64
FQDD = NIC. Integrated.1 - 3-1
InstallationDate = 2015-03-13 T 10: 50:07Z
Current version = 16.0.24
-------------------------------------------------------------------

ComponentType = FIRMWARE
ElementName = Gigabit Intel (r) 4 p X 540/I350 rNDC - B8:CA:3 A: 69:3 A: 65
FQDD = NIC. Integrated.1 - 4-1
InstallationDate = NA
Rollback Version = 16.5.20
-------------------------------------------------------------------

ComponentType = FIRMWARE
ElementName = Gigabit Intel (r) 4 p X 540/I350 rNDC - B8:CA:3 A: 69:3 A: 65
FQDD = NIC. Integrated.1 - 4-1
InstallationDate = NA
Available version = 16.5.20
-------------------------------------------------------------------

ComponentType = FIRMWARE
ElementName = Gigabit Intel (r) 4 p X 540/I350 rNDC - B8:CA:3 A: 69:3 A: 65
FQDD = NIC. Integrated.1 - 4-1
InstallationDate = 2015-03-13 T 10: 50:08Z
Current version = 16.0.24
-------------------------------------------------------------------

ComponentType = FIRMWARE
ElementName = Intel Gigabit 2 p I350-t adapt - A0:36:9F:2E:F8:30
FQDD = NIC. Slot.3 - 1-1
InstallationDate = NA
Rollback Version = 16.5.20
-------------------------------------------------------------------

ComponentType = FIRMWARE
ElementName = Intel Gigabit 2 p I350-t adapt - A0:36:9F:2E:F8:30
FQDD = NIC. Slot.3 - 1-1
InstallationDate = NA
Available version = 16.5.20
-------------------------------------------------------------------

ComponentType = FIRMWARE
ElementName = Intel Gigabit 2 p I350-t adapt - A0:36:9F:2E:F8:30
FQDD = NIC. Slot.3 - 1-1
InstallationDate = 2015-03-13 T 10: 50:03Z
Current version = 16.0.24
-------------------------------------------------------------------

ComponentType = FIRMWARE
ElementName = Intel Gigabit 2 p I350-t adapt - A0:36:9F:2E:F8:31
FQDD = NIC. Slot.3 - 2-1
InstallationDate = NA
Rollback Version = 16.5.20
-------------------------------------------------------------------

ComponentType = FIRMWARE
ElementName = Intel Gigabit 2 p I350-t adapt - A0:36:9F:2E:F8:31
FQDD = NIC. Slot.3 - 2-1
InstallationDate = NA
Available version = 16.5.20
-------------------------------------------------------------------

ComponentType = FIRMWARE
ElementName = Intel Gigabit 2 p I350-t adapt - A0:36:9F:2E:F8:31
FQDD = NIC. Slot.3 - 2-1
InstallationDate = 2015-03-13 T 10: 50:05Z
Current version = 16.0.24
-------------------------------------------------------------------

If the versions downloaded, but the current version is not the new version.

I checked in other systems, and it is.

Now, I tried to go back in idrac7 web GUI and rollback, but it says that it cannot do.
At the same time, the BIOS boot screen shows the BIOS as being 2.5.2!

I had a conversation with Dell. The conclusion was that the motherboard and possibly the network card girl needs to be replaced... somebody's going to come out on Friday to do... That being said, I'm 99% sure that there is a way to solve this problem by replacing the entire Board. I 99% sure because I think to solve the problem requires the system to enter the lifecycle controller, which does not now... and no matter what job I can queue through the UI web or racadm won't do much if it cannot access the lifecycle controller.

I can still access the idrac via web and ssh. I tried to work on the jobqueue change LegacyBootProto None of PXE, thinking that this MIGHT get rid of the "Intel Boot Manager" prompt, but when the system boots, it does not it:

racadm view jobqueue
-------------------------JOB QUEUE------------------------
[Job ID = JID_285566585779]
Job Name = configure: NIC. Integrated.1 - 1-1
Status = on demand
Start time = [now]
Timeout = [not Applicable]
Message = [JCP001: task successfully on demand.]
----------------------------------------------------------

I don't even know whether or not the problem is, really, the Boot Manager.

I thought about another possibility... If it's Boot Manager... If I disable the NIC daughter through racadm card, then I would immediately lose access to idrac and not be able to return to the previous state, but if the deactivation of the card would let me go further so that I could get back in the lifecycle controller and fix things then maybe it's worth? Don't know.

Any thoughts?

Jason.

Yes. I tried this option. It's the same thing. (hang after Intel Boot Agent).

The motherboard of the server has been replaced, and I am currently re - install the updates... Already updated the BIOS which is come with this (2.2.2) server could not update 2.5.2. I'm now trying an update of the idrac. All these problems with the updates are frustrated to no end.

Jason.

Hi guys, having problems installing adobe photoshop 11 (with or without activated antivirus) elements but able to read any other DVD and CD. Can anyone help? See more details. Thank you.

Hi guys, having problems installing adobe photoshop 11 (with or without activated antivirus) elements but able to read any other DVDs and CDs. error message: Error 1935. An error occurred during the installation of Assembly component {9F81AF1-0E47-DC99-A01F-C8B3B9A1E18E}. HRRESULT:0 X 80070057. Can anyone help? I use windows Vista and the DVD is to this system.

Download & install instructions https://forums.adobe.com/thread/2003339 can help

-includes a link to access a page to download the Adobe programs if you have problems with a disk or drive

Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

My photoshop is flashing, there are problems of compatibility with the graphics card. Help?

My photoshop is flashing, there are problems of compatibility with the graphics card. I tried to turn off the graphics card option in photoshop, uninstalled and installed several times, but still. Please, what should I do?
I have an Intel (R) Graphics 5500 HD and Nvidia GeForce 820 M.
I disabled the Nvidia because it seems to me that Photoshop is not supported.

Hey Mohit and other colleagues!

See how I solved this problem (temporarily): workaround Photoshop for screen flashing - YouTube

I hope that helps for a while this problem.

Best regards.

With output window display problems Webhelp/Webhelp Pro

Hello
I created a few projects webhelp after being informed by our team of QA and development projects I created HTML5 format were not compatible with 1.) old versions of IE [specifically the 7 and 8 - posted another discussion on this in the last couple months, tried the patch of shiv without result] and 2) the control used by the program to display a HTML file, mounted on a given device [iOS] - what I have said, this is true for iOS 7 and it is supposed to be a new version of IOS control 8 which supports the HTML features. But we are not there right now (still need to support iOS 7), by application QA/DEV, so I created the webhelp projects to see if these work and display better on devices.
I noticed some display problems when I generate and view webhelp output. Initially, the books in the table of contents are cut off and I have to resize the TOC pane and drag the bar to scroll at the bottom of the viewport to see. But when I do this, the button of the search field in the toolbar is cut. Also, the initial vertical scroll bar displayed on the right side of the window apply to the entire window. In other words, I can't use it to scroll upwards or downwards in the displayed topic. Again, I have to resize the overall window or drag the scroll down bar all the way to the right, how I can see a partial 'hidden' vertical scroll bar for the window in the topic.
The Properties window to create/edit a dialog box window for webhelp and webhelp pro provides much in the way of personalization or all that I can see related to these questions.
Can anyone offer any suggestions on how I can get the window to display correctly?
Thanks in advance for any help you can provide.
Sincerely,
DH

HA! Looks like we stumbled on the solution by mistake. I checked the zoom setting and it was 90%. This has changed to 100% and voila'! No more double scrollbar. The skin - a little Diggin ' this Global Connect we've also changed. But you can now use a scrollbar to move up and down in the topic you would expect.

Thanks for all your time and suggestions to help me solve this problem!

DH

I'm having a problem of design with photoshop for my site.

I'm having a problem of design with photoshop for my site. www.satoriwaters.com.If someone can help me that would be great.

As said by Mr. Pfaffenbichler, explain the problem correctly and provide the necessary technical information such as what version of PS, what system and so on.

Mylenium

Display problem - Photoshop useless with Dell XPS15

Similar Questions

Maybe you are looking for