Display reminders at different time intervals

Similar Questions

• Two different running loops one after another with different time intervals

  Hello

  I am currently using LabVIEW 2013. I'm new to LabVIEW.

  I take 10 values to data acquisition during the 9-10 sec time interval within a period of 10 seconds.

  I thought runs two loops. 1st loop will run for 9seconds out giving zero and the second loop will launch with 1 second left taking all the required 10 values. can someone help me in this way to do it. If you can suggest me any other idea.

  Thank you.

  Your task of data acquisition is to take 10 samples in 1 second (I assume that you also spaced).  10 samples/s = sampling frequency of 10 Hz (Hz = events/second).  To configure DAQmx tasks, MAX is your friend.  Open MAX, find your device (plugged in), open a panel of Test and find a way to let him taste at 10 Hz and collect 10 samples.  Test to see if it works.  Get it now to save as task.

  Now, when you configure your block diagram, drop a DAQmx Start Task (or even read DAQ) and wire an empty constant to the task in.  See the little arrow for menu drop-down?  If you click on it, one of the choices should be the task DAQ, you just saved.  Select that and it will work.

  Now, all you have to do is wait 9 seconds before acquiriing your 10 points.  There are functions of synchronization that can allow you to do this.

  Bob Schor

• GetStat-entity (Cluster) - CPU in real-time - values to zero of the recent time intervals

  Hello world:

  I have a strange behavior when querying via PowerCLI CPU statistics.  We have a handful of clusters in a data center, some with HA + DRS and some DRS only.  PowerCLI seems to report different time intervals (5 min. 20 s vs) according to which cluster is queried and for the most recent 15 minutes of data queries is always zero, although sometimes it's only been 5 minutes which are zero.  This behavior is indicated for applications on clusters and resource pools.

  Is this known behaviour?  vSphere Client shows that the data is present when searching in graphics in real time, so it's confusing why smaller or no value is present at all from the CLI.  Ideally, I would like to know the average use of MHz and percentage for all groups to 20 s averaged granularity on the last 2 minutes, but no amount of massage does seem to happen.

  example query:

  Get-Stat - Realtime-Stat "cpu.usagemhz.average" - entity (Get-ResourcePool-name 'Low') - departure (Get-Date). AddMinutes(-20)-Instance "

  As I understand it, the measures for groups and entities related to the cluster as resourcepools, are aggregated values of definition.

  Which means that the vCenter must calculate these metrics of the values collected by the ESXi hosts.

  In other words there is no interval in real time for the metric for clusters, only of the historical intervals.

• Satellite P200-1JV - screen begins to blink in different times

  Hello!

  I am owner of a Satellite P200-1JV since last week and three days ago I had a strange problem.
  My laptop * screen starts flashing * in different times.

  The flash frequency increases by 3.4 times to 10 +.
  In addition, the number of times to flash occurrence increases significantly.

  The blinking persists even if I do * not * activate any program.
  All programs are by default.

  Everyone knows the same problem before? Any solution?
  The graphic problem (ATI Mobility Radeon HD2600)? Or is it a manufacturing problem?

  Could you please help me?
  Thanks for in advance!

  What do you mean by manufacturing problem?

  It very difficult to imagine that how the display flashes or what might the case these flashing but it certainly looks like a hardware problem.

  If its hardware issue you will need to contact a technician from Toshiba for a fix. I think it's clear

  The P200 seems to be a new laptop and my knowledge, the guarantee must cover all
  So, don t waste time and ask an ASP in your country for a control from laptop

  Good bye

• How do I either set channel name of a graph of cluster or get a 1 d waveform chart to start different time (t0) for each line of the waveform?

  I have a chart single 2D out a conditional of a loop indexing output such that over the rows of the table are not the same size. -Basically, they have different starting and ending points and sizes. -Not so concerned by the endpoints, because as soon as I get correctly starting points, everything shows fall in place.

  The challenge is that when I try to have the variable t0 (start time) for each line, the wave of construction vi form would always keep each line at the same starting point.

  I used the approach bundled with success (the cluster approach ensures that each waveform starts at different times according to the guidelines of my t0 defined for each line) but then I'm not able to get in the channel names I could make using the graphical approach (wave generation) waveform.

  In essence what I get here, I'm losing here.

  Because I don't want one of my mentors, Bob and Altenbach have fed up with me I have attached a vi this time

  Attached VI shows a combination of the two attempts (first with the waveform graph) and then with the graph of cluster

  1. with the first (graphical waveform), I get my channel names as you wish, but the alignment of the wave is not correct.

  2. with the second (graphical cluster), the alignment is good, but I can't do the names of channel in the chart, even if they are present in the cluster.

  I read some reviews that mentions that attributes can be displayed with waveform and data Dynamics (not clsuters) so I guess that's why.

  I saw another report indicating the start time for a waveform 1 d will always remain the same for the rest lines defined for the first line even if changed for the following lines in a loop.

  So I guess my question is: what is the way around questions like that?

  First of all, let me be the first to the congratulate and thank you for finally posting a code!  I'm not 100% certain I understand your question or your code, but I have an idea, perhaps, of what you want to do, so I wrote a little VI who made something simple that could be relevant.

  You mention waveforms of different lengths and beginning at different times.  You also want everyone to have a unique attribute (although I'm not sure what you want to do with the attribute).  So, I did the following:

  1. Generated an array of 100-sample random to represent one second of a waveform.
  2. Created 4 waveforms on this 100-sample basis.  The first waveform (channel 0) is just these 100 points.  The second, 1 channel, is the concatenation of string 0 with the base of 100 samples, or a waveform "double".  Channel 2 is 1 string concatenated with the base, and channel 3 is 2 string concatenated with the base.
  3. In order to trace the four channels that they rest 'on' the other, the waveform has the number of the channel added to it.  Channel 3 is 3 + (4 copies of the basis of 100 points), a waveform 400-point random centered around a shift of 3.
  4. All channels have dt value 0.01 (but I guess I could have varied, as well).
  5. To make the channels start at different times, I started channel N N seconds before channel 0 (by subtracting the index of the loop, I, T0).
  6. For each channel, I created an attribute called "Chan" equal to "Channel N" (where N = 0, 1, 2 or 3, as the case may be).

  This is the plot that results. Scale X is the absolute time value (no Date) using the 24-hour HH: mmS format.  You can see that the plots are 1, 2, 3 and 4 seconds of time, and are offset from each other by a second.  I used the trace attributes to change the name to the respective attribute.

  

  The code to do this is very simple - I almost don't need to show it, because I think it is completely described by the text above, but this is here:

  

  Now, it was not that much faster that some of your previous posts, when you refused to your postcode, "guess us" what you wanted (but not to not correctly guess), you tried to "push" us in the right direction (still refuses to post code), and no one seemed very happy?

  Bob Schor

• Create a waveform using PCI-6723 AO with various time intervals on the trailing edge of the sample of 200 Hz clock and 0.1% duty cycle

  I use the PCI-6723 card and I am trying to produce a model of waveform using the analog output channel. The wave consists of 5 different voltage levels. The main problem is that the first 4 voltage levels are supposed to have 926 microseconds time intervals and the time interval the last voltage level is supposed to be 1,296 milliseconds. In addition, the waveform must be triggered on the trailing edge of a sample clock of 200 Hz with a 0.1% Duty Cycle. Is it still possible? If so, any help would be greatly appreciated. Thanks in advance!

  Here is what I currently have, but it does not fulfill my purpose.

   int32   written;
      float64 data[5] = {-0.23, 0.38, 1.12, 1.78, 0.10};  //volts
      //long  time[5] = {  926,  926,  926,  926, 1296};  //microseconds
  
      // DAQmx Configure Clock
      DAQmxErrChk (DAQmxCreateTask("",&taskHandleFRQ));
      DAQmxErrChk (DAQmxCreateCOPulseChanFreq(taskHandleFRQ,"Dev3/ctr0","",DAQmx_Val_Hz,DAQmx_Val_Low,0,200,0.001));
      DAQmxErrChk (DAQmxCfgImplicitTiming(taskHandleFRQ,DAQmx_Val_ContSamps,1));
  
      // DAQmx Start Code
      DAQmxErrChk (DAQmxStartTask(taskHandleFRQ));
  
      // DAQmx Configure Code
      DAQmxErrChk (DAQmxCreateTask("",&taskHandle));
      DAQmxErrChk (DAQmxCreateAOVoltageChan(taskHandle,"Dev3/ao0","",-10.0,10.0,DAQmx_Val_Volts,NULL));
      DAQmxErrChk (DAQmxCfgSampClkTiming(taskHandle,"/Dev3/Ctr0Out",1000.0,DAQmx_Val_Falling,DAQmx_Val_ContSamps,5));
  
      // DAQmx Write Code
      DAQmxErrChk (DAQmxWriteAnalogF64(taskHandle,5,0,10.0,DAQmx_Val_GroupByChannel,data,&written,NULL));
  
      // DAQmx Start Code
      DAQmxErrChk (DAQmxStartTask(taskHandle));
  

  Bingo. This code seems to work much better. Looks like I had to reduce my number of samples per 1 to fit the waveform desired in 5 milliseconds of the sample clock delay.

  However, if someone knows a better way to achieve these results, I am open to all ideas.

  void CDevDlg::OnRdr1e1()
  {
      float64     data[4000];
      float64     volt[5] = {-0.23, 0.38, 1.12, 1.78, 0.10};  //volts
      int x=0,d;
  
      for(int v=0; v<4; v++)
      {
          for(d=0; d<741; d++)
          {
              data[x++] = volt[v];
          }
      }
      for(d=0; d<1036; d++)
      {
          data[x++] = volt[4];
      }
  
      // DAQmx Configure Clock
      DAQmxErrChk (DAQmxCreateTask("",&taskHandleFRQ));
      DAQmxErrChk (DAQmxCreateCOPulseChanFreq(taskHandleFRQ,"Dev3/ctr0","",DAQmx_Val_Hz,DAQmx_Val_Low,0,200,0.001));
      DAQmxErrChk (DAQmxCfgImplicitTiming(taskHandleFRQ,DAQmx_Val_ContSamps,800000));
  
      // DAQmx Start Code
      DAQmxErrChk (DAQmxStartTask(taskHandleFRQ));
  
      // DAQmx Configure Code
      DAQmxErrChk (DAQmxCreateTask("",&taskHandle));
      DAQmxErrChk (DAQmxCreateAOVoltageChan(taskHandle,"Dev3/ao0","",-0.5,2.0,DAQmx_Val_Volts,NULL));
      DAQmxErrChk (DAQmxCfgSampClkTiming(taskHandle,"",800000,DAQmx_Val_Rising,DAQmx_Val_ContSamps,4000));
      DAQmxErrChk (DAQmxCfgDigEdgeStartTrig(taskHandle,"/Dev3/Ctr0Out",DAQmx_Val_Falling));
  
      // DAQmx Write Code
      DAQmxErrChk (DAQmxWriteAnalogF64(taskHandle,4000,1,10.0,DAQmx_Val_GroupByChannel,data,NULL,NULL));
  }
  

• Add an event (Touch) at different times to a symbol?

  Hello

  I searched to see if this has been answered. However, nothing seems to solve completely.

  The problem:

  I have a design of the tablet with several pages (three pages) and that a single arrow to move between pages in the lower right corner of the screen.

  In theory, a user can press the button and the first page would deconstruct offshore and the next page would be inspired.

  I would like to do this for each page, if a user can tap through the whole experience without knocking swipe, a loop to the first page. I was able to configure easily get on the first page

  on the second (this example uses the symbol for a touch event using triggers to start and stop).

  The Question:

  How to make a button (symbol) do the same action at different times? For example, 1 to 2 seconds, the button action going from page 1 to page 2. In 2-3 seconds, the button would then switch to be any another event for transition from click

  between 2 to 3 pages?

  I don't want to have to build several buttons and would rather resolve this problem in the code.

  Thanks for any help!

  Best,

  S

  Hello

  So, your arrow will have a click with a conditional statement event:

  If (sym.getDuration () == 1000) {sym.play(1000) ()} //page 1 is displayed

  ElseIf (sym.getDuration () == 2000) //page {sym.play(1000) ()} 2 displayed

  ElseIf (sym.getDuration () == 3000) {sym.play(1000) ()};  page 3 posted

  I assumed you put triggers in 1000, 2000 and 3000 with sym.stop ();

  

• is it possible to display the Date and time in the address bar or a clock window constantly

  I need to take screenshots with date stamps and time using the script of iMacros. Everything by taking screenshots iMacro don't add taskbar windows for the date and time. It takes screenshots of browser. Is it possible to display the Date and time in the address bar or a clock within the tab browser constantly to capture the screenshot with time stamp through iMacros
  I added the big clock background Add-ons, but it is visible to new tabs.

  Badly looking for help and it will be really appreciated...

  Try this extension:

  • https://addons.Mozilla.org/firefox/addon/simple-clocks/
  • https://addons.Mozilla.org/en-us/Firefox/addon/FoxClocks/

• Time Machine - an exclusion different backup for the backup drives different time machine

  I hope someone can help me.

  For these past years, I used 2 Time Machine backups to keep all safe. I have 1 backup x who lives at home and is 3 times the size of my disk. I also have a second drive of laptop that I travel with, which is partitioned to give a little time machine backup, more than 1.5 TB of "overflow storage (for movies, video files, etc).

  Recently however, I realized that my "storage of listening" actually contains a large amount of data I wouldn't lose (especially the photos of my children because they were born), so now I want to save this drive as well.

  If my ideal situation is to have a huge drive I leave at home. This contains backups of the computer AND 'excess of storage' backup. It's pretty simple to implement.

  But can someone tell me if my trip backup, will try also to the other partition of the backup drive? And if so, is there anyway to give different time machine backups different exclusions.

  Hope that makes sense and hope that someone can help me.

  Thank you
  John

  You will need to manually change the exclusions when you going on a trip. There isn't a way to change automatically.

• Work on App and travel to different time zone

  What happened to my circle of training and records when traveling to a different time zone?  Will be my streak get screwed up by the different time zone?

  Thank you

  J

  This will depend on when you switch to the different time zone.  Will travel you East or West?

  • If you are traveling to the West and extend the day, pass the watch to the new time zone, before midnight the previous zone.
  • If you are traveling from the East and the day is shortened, switch back to the previous zone, the day before that I sup, if you need complete rings.

  I posted my results for the purpose of 'stand' here: How to extend the day after midnight to complete activities and close the rings

  If you wish to extend your day past midnight to close the activity temporarily put rings the time zone to time zone more West.  Change the time zone by midnight. Now, you can use the overtime that the timezone is offset from your usual time zone to complement the missing activities.

  I tested again on a long distance flight, where the time zone to destination is shifted 8 hours than my home timezone.

  As you can see, watch OS 2.1 may give credit for activities for more than 24 hours if change you the time zone.

  At 17:00, the watch already showed that 25 hours of 'Beneficiary', more than a day.

  

  And with the 8hrs offset in my regular zone I could have accumulated 30 stand hours in work a day of:

  

  If you wish to extend your day to complete the activities in this way, do not forget to set the time zone before going to sleep, or you may forget the next day that the watch is a few hours off the coast. I'd wait to set the zone time back until after receiving the message that all tasks have been completed for the day and set the timezone to the correct time after the next hour.

• Since the upgrade to IOS 9.3.1 my Telstra sim displays no Service every time that I reboot.

  Since the upgrade for my iOS 9.3.1 iPad2 my Telstra sim displays no Service every time that I reboot. I contacted Telstra and they sent a signal to the Tower closest to you. However, every time that I reboot I remove the sim card and then reinsert it. I then get a complete service.

  Network settings may be damaged after an update of iOS.

  Tap settings > general > reset > reset network settings

  Then restart your iPad.

• A model of TV Sony KDL-32BX330 has somehow display the date or time? MENU button does not

  A model of TV Sony KDL-32BX330 has somehow display the date or time? The button MENU has no option to select or adjust the time or date... maybe a new firmware?

  Hello, manual,.

  There is no option to display the time and date of the TV Sony KDL 32BX330.

  We cannot comment on future firmware updates, nor can respond us if a product will not in the future it does not currently feature.

  If my post answered your question, please mark it as an "accepted Solution".

• Photos create two different times.

  Sometimes Photos create two different times with pictures of the day. How can I join in an instant?

  Thank you.

  You can not - moments is totally automatic and you have no control of it--tell Apple what you want - http://www.apple.com/feedback/photos.html

  LN

• How can I Albums in the Photo App with images taken at different times.

  How can I Albums in the Photo App with images taken at different times.

  I had books in Aperture and iPhoto which have been labeled 'Family', 'Friends', etc., and I would like to move the images in the album, and there no matter when it was taken.

  Thank you

  Brian

  In the same way. Make an Album and drag the images to him. Key word or images and the use of the smart Albums.

• Write several bays in one xml file at different times without overwriting the old file?

  Hi my name is Dustin,

  I am new to labview and teststand... I try several tables of data in a single XML right. I can do this with a cluster but I need to create a variable for each of these pictures (21 pictures) and I was hoping to use the same variable for each table. Which means that I get my data table write in an xml file and replace this table in this variable with a new table and then call my VI who writes this table in an xml file and write to the same file xml under the first table without crushing. My VI I created to write a table to an xml file is attached. Yet once I wonder if there is a way to write several berries in a single at different times xml file, without overwriting the old file xml.

  Thank you

  Hi dlovell,

  See the attached example. I think he can help you.

  Kind regards
  Nitz

  (Bravo to give good answers, mark it as a Solution If your problem is resolved)