Satellite P200-1JV - screen begins to blink in different times

Similar Questions

• Satellite P200-1JV failure

  Sorry if this fault has been raised, but for now my only access to the web is through our Wii and it isn't ideal.

  I was using the laptop when it suddenly stops working. Without warning, it was as if the power had been cut to it. The unit is plugged and I have not noticed any change in the battery indicator. It's never moves on the desktop and is normally connected. On opening it, there's not a lot of dust inside. Now when the button is pressed nothing happens at all-no lights nothing.

  It is a model of Satellite P200-1JV PSPB6E-18F028EN number
  Thank you

  Hello

  Remove the battery; disconnect the power supply and leave the laptop for a while.
  Then try to start the laptop with AC power only.

  Either way, check follow document Toshiba http://aps2.toshiba-tro.de/kb0/FAQ6201DK0004R01.htm

• Advice on which necessary to a Satellite P200-1JV driver

  Hello

  I have a Satellite P200-1jv (PSPB6E) and miss a driver after a format for a mass storage controller.

  If someone can advise which driver should I install?

  THX vinnygreg

  XP or Vista?

  Did you install a copy of Windows Street?

• Satellite P200-1JV: A DVD from Toshiba drive - unable to output video...

  Hello

  I just signed up so forgive me if I posted this question in the wrong place.

  I have a Satellite P200-1jv and I could read the dvd on it without problem. Now when I try to play a dvd using the Toshiba player, I get a message coming indicating + * impossible at the exit of the video on an external device. Please change your device display by pressing Fn + F5 keys after the end of this application + *.

  I'm trying this and lcd comes but never changes. What I am doing wrong?

  Thanks for your help.

  Stretchmo

  Hello

  I think I can help and I found a solution.

  I recalled to this topic and searched a bit here in the forum and found this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=114726𜀦

  Jack Black has posted a link to the document from Toshiba which describes exactly this problem and offers a solution.

  The problem can be solved by updating the Realtek Audio driver.
  You can download the driver from his most recent on the Realtek site and may reinstall it.

  Concerning

• Satellite P200-1JV of music rises like a sound card will not play

  I have a toshiba Satellite P200-1JV and I'm on spotify (music player)
  Music is coming as a flaw of the sound card and will not play. Little play and it's a little bit distorted.

  Are there updates/drivers sound card I should be downloading?

  Sorry to be thick. And thanks for any answers

  Stretchmo

  Hello!

  To be honest, it looks like bad equalizer settings, so try to reset as Akuma said.
  And by the way, do you have the same problem with external speakers?

  In your case, I will try to update the audio drivers. You can find it on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  I hope it works for you!

  Good bye

• Satellite P200 - 10G screen turns white cause driver

  I was gifted a Satellite P200 - 10G, works great so far, only if I try to install the graphics driver (Intel 945 G), both that of intel and Toshiba one my screen goes black on each Windows (XP, Vista, Win 7, Win 10). It works with the standard Win drivers (except Win7).
  Any ideas why this is happening. And maybe a workaround?

  Regardings

  mindscraper

  If I understand the question, the laptop works properly using the standard Windows graphics driver that is part of the system and standard resolution (I guess that 800 x 600 or 1024 x 768 or something like that).

  But after the installation of the driver graphics card, black laptop display changes and nothing is visible on the internal display. Right?

  This happens also in the external screen/monitor?
  Check it out

  But to be honest, the question looks like a malfunction of the graphics card.

• Question about battery on Satellite P200-1JV

  Can someone answer this question please: what Satellite P200 battery and battery recharging happens at 100% load, and the light is blue are there continuing fees to the battery or does the pc disconnect the load?

  I ask this question because my laptop is plugged in for long periods of time and I don't want to fry the battery because 99% of the time its used as a desktop pc.

  Hello!

  Have you checked the manual for more information? I downloaded it on the Toshiba site because I have another model and I can find the following information on the LED power:
  + In normal operating mode, the power light is blue (depending on the model you have purchased). If the system is in Standby Mode, the LED flashes orange, while the light is off when the computer is turned off or in Hibernation mode. +

  I put t know if this information is useful for you, but if the laptop is connected with the adapter AC/DC battery will not be used.

  Good bye

• Satellite P200-1JV - tough screen very bright

  Hi guys

  I've had this laptop for centuries without problems. But lately the screen went bright. Happens every two days and the F6/F7 keys do not work for this problem, actually they don't work at all. :(

  It can stay for 10 minutes and do or in hours, and then this. I have to restart the laptop to clean.

  Help me please. Laughing out loud

  Hi stretch,

  Very bright, means that the display jumps to highest brightness of the screen as if you were using the FN + F7 key combination to enhance the brightness?

  Have you checked the brightness of the screen in Windows power management?

  What operating system you are using? Maybe you need to update the VAP and utility Support Flash Cards to use the FN keys again.

• Mark on (or under) Satellite P200 black screen

  Hi, I have an old P200-1EE of 8 months. An irregular shaped black spot appeared on (or under) my screen. I did various tests of dead pixel and that doesn't seem to be the problem. Indeed, this brand seems to be under the surface of the screen. Is this possible? How it is there? What is it? My warranty will cover a replacement? Can anyone help?

  If you have time, please consult these two peaks-

  [http://picasaweb.google.co.uk/LesOwenButler/MiscImages/photo#5238887107304657506]

  [http://picasaweb.google.co.uk/LesOwenButler/MiscImages/photo#5238887105946536626]

  Thank you
  Them

  We can discuss here three days and nights, but it won't help you at all. There is hardware failure, and it must be checked by the service. Contact the nearest service provider allowed and let them take a look inside.

  I hope that the warranty is still valid and it will be repaired free of charge.

• Satellite P200 and screen LCD Samsung T240HD - impossible to get good resolution

  Hello
  I can't force my laptop P200 with radeon 2600hd to work properly with the Samsung T240HD LCD screen.
  Nor with the d - Sub or HDMI output.

  Using d - Sub maximum resolution I can get is 1024 x 768... monitor can go up to 1900 x 1200. With different laptop ex Toshiba P100 with nvidia Go7600, everything is OK - 1920 x 1200 goes like a charm.

  Much worse is to use an HDMI output. Photo is very poor - I can't choose any standard resolution. Worse than common crt tv (SD).

  I have a new Toshiba support web pages display drivers.
  The cables are OK.

  Any help?

  Hello

  I'm really surprised that you can get the resolution of 1024 x 768 only. According to the specifications of the laptop for P200 with ATI graphics support for external monitor resolutions are:
  640 x 480
  800 x 600
  1024 x 768
  1280 x 1024
  1400 x 1050 is not supported.
  1600 x 1200
  1920 x 1440
  2048 x 1536
  Then maybe you should try to use the original driver Samsung

• Satellite P200 (PSPB6E) - screen LCD cleaning and new display drivers

  I have P200 almost 2 years (which means the end of a guarantee for me soon) and after about a year, bad pixels began to appear. I do not know exactly if all (it's more than 10 now) are in fact the bad pixels. Compared to other laptops Toshiba, I have always had lower edge of the frame of the screen a little loose (so he leans a little after I push in the middle of it and a lot of dust and dirt continues to fall below) and there was a time where I have even a piece of hair between the transparent cover of the lcd screen and the Panel itself (after a certain time it fell under the bezel by itself).

  I would like to ask, if it is possible to remove the transparent cover of the screen so I can clean from inside?

  I want to avoid a scenario, when a service provider told me that there is an insufficient number (according to the ISO standard) bad pixels for repair under warranty, so all that waiting to get the laptop to and return service was actually for nothing.

  Also, is there somewhere a new VGA driver for this laptop? There Radeon HD2600 and the latest driver download from Toshiba site is July 22, 2008. I also tried ATI.com but it's as if HD2600 was no model ATI. The standard Catalyst drivers for versions of office do not work and there is no HD2600 specialized drivers, except those of Toshiba. I think that this will become a problem even more acute when Windows Seven will be put in place and with a lot of users is no longer manufactured portable (and many of them ignored Vista if their material has enabled), will seriously consider trying the new OS and there is no VGA compatible driver for her, because some Toshiba forgets to update them and ATI seems that they don't care.

  Thanks in advance for any help with these.

  Hello!

  To be honest right now I n do what cover you average, but normally it s not necessary to clean the LCD from the inside.
  Also it of a bit more difficult to remove the cover plastic around the LCD and you really must pay attention to not destroy as this plastic is very sensitive.
  In my opinion the best way would be if you go to an ASP. For the moment, your laptop is still under warranty so that you should use to get a free repair of laptop. With more than 10 pixels dead, you should get a new view.

  On the Toshiba site, you can find the nearest authorized service provider:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

  On the display driver: why do you need a new? I always use the drivers of Toshiba and never had a problem.
  What you can do is to get a cell phone which is equipped with the same graphic card. Maybe on other cell phones, a newer driver has been released yet.

  Good bye

• Satellite P200 - 1JV - installation of HD DVD software does not

  I try to install the software HD DVD (drive) on my laptop and I get the message error "this application cannot be installed on this computer.
  I know that I have the HD player. I'm using Vista SP1 and install the correct drivers. My firmware is - SD - L802B (TO01). I couldn't find anywhere to update. I use the newest BIOS for laptop.

  Any ideas would be great.
  Will be

  You have a Toshiba recovery media for your laptop model.
  I know it sounds stupid now but the recovery images include an HD DVD player and you can have if you install OS using this recovery media.

  To be honest, your question is strange. I have Satellite P200D without HD DVD drive, but I managed to install a HD Toshiba DVD player to this topic. No problem at all.

  You have a Toshiba DVD drive installed on your laptop?

• When I right click on the shortcut icon, my screen begins to blink and I have to do a Ctl/Alt/Delete to return to display system and monitor to normal.

  * Original title: Steve M.

  I have My Documents on my Windows 7 desktop.  When I click the icon, an icon My Documents Shortcut.link then appears next to the My Documents icon.  When I right click on the shortcut icon, my screen started flickering and I mus do a Ctl/Alt/Delete to return to display system and monitor to normal.

  I tried to remove the My Documents icon, but who only 'pretending' in the file recycle.  Of course, I don't want to totally delete the My Documents!

  Any advice will be appreciated.

  Thank you.

  Although it is strange that the location of your documents is

  C:\Users\Steve\Doc

  Instead of

  C:\Users\Steve\Documents

  This result shows that the "My Documents" icon on your desktop is a shortcut and not the actual file with your documents.  The icon on your desktop has a blue arrow, like this:

  

  If you delete this icon, you should get a message like this:

  

  As long as the 'shortcut' word is in the message "Are you sure", everything you delete is a shortcut and not your actual files... so go ahead and delete it.  You can then create a new shortcut or just use the 'Documents' shortcut located on the start menu:

  

• Satellite Pro L300 (PSLB9A) - black of blinks twice every time

  When I start the laptop, the desktop appears before him completely flickers black twice each time. With computer tech friends, we put our finger on it down to be a hardware problem, then the driver but when I go and download intel driver from the Web from Toshiba to display site [here: http://www.mytoshiba.com.au/support/notebooks/satellite/pro/l300/pslb9a-02k002/download#filters]
  but it does not work.

  The laptop is only 4 months old and I am very annoyed at this subject - also call support Toshiba does anyone know of another option?

  Hello

  > The laptop is only 4 months old
  In this case, you must contact an authorized service provider because your laptop should be under warranty and so repair should be free.

  Have but before moving on to an authorized service provider you tried to reinstall the notebook using the Toshiba Recovery disk? If this is not the case, check this please!

  Welcome them

• Satellite Pro P200-1JV - how to reset to factory settings?

  Hello

  I'm trying to reset my Satellite Pro P200-1JV to factory settings. I tried pressing reset and turn on, also tried pressing F8 and turn on and no system recovery doesn't happen as I was told that it should.

  I put everything in place of discs with it and it's a Vista operating system.

  Help, please!

  Thank you!

  Al

  Hi alanmanley,

  Why you press the zero key to restore factory settings?
  You can restore the factory settings if you go into the advanced Windows (F8) boot menu and select Repair my computer. Then will begin the recovery of HARD drive and reinstall Windows.

  In addition, this option is available on OS preinstalled Toshiba and the recovery disc, that you create yourself as mentioned in the user manual.

  Last but not least check this article:
  http://APS2.toshiba-tro.de/KB0/HTD9102IR0000R01.htm