DISPLAY WENT ALL WEIRD!

Similar Questions

• Issues with the display settings - all super tiny

  I have problems with the display settings, all of a sudden, everything was super great and difficult to see all the toolbars on the screen, I went to the settings display, and somehow managed to make everything incredibly tiny.  I found a page via the display settings (avancΘs?) that allowed me to adjust the percentage of the elements on the screen.  I reduced to 40%, and then the setting stuck and now I can not see or read anything.  I'm trying to return to the display settings, but I can't find this 'page' which allowed me to make this change.

  I saw a similar post:

  "I messed up my display settings. my resolution is so great that I don't see anything but black vertical lines and sets of 3 white dotted lines in sequence across my screen. my mouse can not be seen either. is there anyway to restore my original settings? It's as if everything is bigger there should be 200 to 300%.

  Hello

  There are a few things you can try:

  1. reboot the PC then start tapping the F8 key until you get the Windows Advanced on-screen Menu of Options.

  Then choose "last good known Configuration". Allow Windows to start.

  2. restart PC then start tapping the F8 key until you get the Windows Advanced on-screen Menu of Options.

  Then choose "Enable VGA Mode". Windows XP loads with the color values that can handle your "lower" resolution and display driver Once in Windows, change the resolution, then restart the PC.

  3. try to go into "Safe Mode", which is accessible in the same way as "VGA Mode". "Review the same routine as no. 2.

  I tried to hit F8, but nothing happens, I tried to reboot several times.  How do the Advanced Options?  Someone knows it the screen that I talk with the possibility of adjusting the percentages, how can I find it again?  So I can not really read or see anything.

  Hi fixxazd,

  For instructions on starting in the advanced system recovery options, see the following articles:

  A description of the options to start in Windows XP Mode

  Advanced Troubleshooting for General startup problems in Windows XP

  See also:

  How do advanced clean boot troubleshooting in Windows XP

• I tried to open other photos stored in my pictures library, but that they would open no Ether. I can put pictures as my background but can not display at all.

  I recorded the photo on my desk because I'm lazy, but when I went to the open I can't.
  After that, I tried to open other pictures saved in my pictures library, but that they would open no Ether.
  I can put pictures as my background but can not display at all.

  Check out this link, it seems that you have lost your settings to open the photo viewer in your default viewer.

  http://Windows.Microsoft.com/is-is/Windows7/change-which-programs-Windows-uses-by-default

• What happens if the PC I just downloaded Itunes on & connected to, does it display not all devices?

  What happens if the PC I just downloaded Itunes on & connected to, does it display not all devices?

  Hello 2sealadies!

  Thank you for joining the communities Support from Apple! Looks like you have a problem with your iTuens on Windows 10 not to recognize your iPhone. I know how important it is that the iPhone is recognized by iTunes. Read this article with steps If iTunes does not your iPad, iPhone or iPod. Specifically, after the first series of measures:

  If you are using a Windows PC

  1. Open Device Manager by following the steps for the version of Windows that you have:
     • Windows 10: Click the search box in the lower left corner, type Device Manager and press ENTER. In the list under Bus USB controllers, find the Apple Mobile Device USB Driver.
     • Windows 8: loose in the right edge of the screen. Press search and enter the Manager devices, and then click Device Manager. If requested, enter your password. In the list under Bus USB controllers, find the Apple Mobile Device USB Driver.
     • Windows 7: click on > Control Panel > system and Maintenance > Device Manager. If requested, enter your password. In the list under Bus USB controllers, find the Apple Mobile Device USB Driver.
  2. Even if you do not find the Apple driver, follow the steps below, based on what you see or don't see.

  The pilot and
  No symbols

  A down arrow
  by the driver

  Exclamation or
  question mark by
  the pilot

  No Apple Mobile
  USB device driver

  You don't see symbols next to the Apple Mobile Device USB Driver

  If you do not see , , or of the Apple Mobile Device USB Driver, look for third-party software conflicts. Then if you still need help, restart your Apple Mobile Device Service or contact Apple technical support.

  

  You see an arrow down

  If you see next to the Apple Mobile Device USB Driver, the driver with the right mouse button and choose enable from the context menu. Then if you still need help, contact contact Apple technical support.

  

  You see an exclamation point or question mark

  If you see or the Apple Mobile Device USB Driver, right click on the entry, then manually update the Apple Mobile Device USB driver.

  

  You do not see the Apple Mobile Device USB Driver

  1. Disconnect your device from your computer.
  2. Save a screenshot by pressing the Home button and sleep/wake button of the device button at the same time. The screen should Flash briefly.
  3. Reconnect your device to your computer.
  4. If you see one of these sections in the Device Manager, expand them:
     • Imaging devices
     • Other devices
     • Portable devices
     • USB Bus controllers

  Now, locate the entry that recognizes the device as a camera. You should see 'Apple IPhone', 'Apple iPad' or 'Apple iPod '. Right-click the device entry, and then manually update the Apple Mobile Device USB driver.

  If a single unknown device appears, follow these steps:

  1. Right click on the unknown device entry.
  2. Choose Properties from the context menu, and then click the Details tab.
  3. In the drop-down menu, select hardware IDS.
  4. If the ID begins with something other than USB\VID_0000 & PID_0000, go into the Device Manager and right click on the entry for device unknown, and then manually update the Apple Mobile Device USB driver.
  5. If the ID begins with USB\VID_0000 & PID_0000, then follow the remaining steps.
  6. Unplug the unit and remove all the USB devices on the computer.
  7. Shut down the computer, and then turn it back on.
  8. Reconnect the device, tests of each USB port for about 30 seconds to see if the device is recognized.
  9. Test with a different, checked 30-pins-USB or the lightning-connector-cable-USB, if they are available.

  If you still need help, contact Apple technical support.

  

  Manually update the Apple Mobile Device USB driver

  If one of the sections above directs you to this section, you should already have right click on an entry in the Device Manager. Now, follow these steps:

  1. Choose update driver software.
  2. Choose "Browse my computer for driver software."
  3. Choose "Let Me pick from a list of drivers for devices on my computer.
  
  
• Click the disk button. If this is not available, choose a category of devices such as Mobile phone or storage device, if in the list.
• Click Next. You should see the disk button.
• Click Browse and navigate to C:\Program Files\Common Apple Mobile Device Support\Drivers.
• Double-click the file "usbaapl. If you have a 64-bit version of Windows, this file will be called "usbaapl64". If you do not see here "usbaapl64" is not a Drivers folder, look in C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers.
• In the disc window, click Open, and then click Next and then click Finish.
• Windows installs the driver. If a message indicates that the software that you install "not passed the Windows Logo test", click on continue. You can get help with other common errors and the error code numbers in this Microsoft article.
• Open iTunes to make sure that iTunes recognizes your device. If not, Restart the Apple Mobile Device Service.

See you soon!

• My MacBook Pro display went dark. System is still running. Any ideas?

  My MacBook Pro display went dark. System is still running. Any ideas?

  Hi Ihabah:

  I found this information. Maybe this will help. http://osxdaily.com/2014/11/22/fix-MacBook-Pro-booting-black-screen/

  Kim

• Satellite L650 - 14G - no display at all

  Satellite L650 - 14G yesterday his works very well, no display at all, fan works fine.

  Can someone help me?

  Hi shanefarcry,

  You can see a picture when you connect an external monitor?

• I installed Windows 7 on my computer. Its rebooted normally, but when he was loading files to the top of the color went all wrong... As you do not see the weight...

  Installation of window 7. ! With a problem! Help, please!

  I installed Windows 7 on my computer. Its rebooted normally, but when he was loading files to the top of the color went all wrong...

  As you do not see the weight...

  Please help me!

  • 512 GB of ram with a Flash ram Drive his 10
  • Windows aero does not support "as the scan did not say very important hahah: D.
  • Intel Inside Pentium 4
  • Reference Dell computer WITH a disk emachine hard and things 'VERY OLD '.
  • 149 with Flash Drive 500 GB hard drive

  Help, please!

  PS. Mr. need help! D:

  I can run vista Basic that lol

  I didn't mean that you cannot run Windows 7. I have run on systems with 512 MB of ram. It will work, but will slip. It will be the same for Vista. I recommend that stick you with Xp until you are able to upgrade your ram.

• When windows starts, the user name is not displayed, almost all programs do not work, or I get a message saying that they do not have authorization to run the service

  When windows starts the user name is not displayed, almost all programs do not work, or I get a message saying that they have permission to run the service, sometimes windows not loading some programs of initialization and I can't turn off the pc by using the start menu, when it arrives, sometimes everything works normally when I turn on the pc except of my antivirus (avast!) and firewall (comodo) , they are responsible, but avast! said that the service is disabled and when I him there is a message saying that he had ceased to maximize or in an inconsistent state and comodo said that the application of the agent is not running.

  My Windows is XP Professional SP3.

  Thanks in advance.
  (Sorry for my English)

  * original title - I have starting problems I've ever had and I can't find a TomTom.*

  Salvation exodus REV,

  You did it of any material changes or software on the computer before this problem?

  I recommend you to uninstall Avast! & Comodo temporarily from Add / Remove Programs. Later, check to see if the problem persists.

  To uninstall Avast!, you can use utility aswClear to uninstall Avast!.

  For more information, refer to this link: Uninstall Utility

  You can not install Comodo since Avast! has a built-in & antivirus firewall.

  Hope the helps of information.
  Please post back and we do know.

• I've accidentally maxed the display open all trying to open a word document and I can't go back to its original size. What should I do?

  I've accidentally maxed the display open all trying to open a word document and I can't go back to its original size. What should I do?

  Click the button on the top middle right, or give a better explanation please.

• My preview area went all messed up? : [(CS6) (Photos)

  If the preview area (area where it shows where in the video, you are on) went all messed up like this > > >

  (Pic) Gyazo.com/920fc648b1db9fe199683e4aab44fa03

  How can I reset it usual, one screen?

  This section of help from After Effects:

  http://helpx.Adobe.com/en/after-effects/using/modifying-using-views.html#choose_a_view_lay out_and_share_view_settings

• How to connect mid 2000 Apple Cinema Display to all new MacBook Pro

  Hi all

  I have an old monitor Apple Cinema Display (probably around 2005/2006) and would like to connect it to my new MacBook Pro. I bought the cable I thought I needed but it wasn't the right one, so to avoid that happening again, please could someone advise which is the right cable to use.

  Thank you!

  I have no idea of what you purchased was not compatible.

  You will need an adapter of your Thunderbolt port for the cinema display.  I guess (since you don't specify the entries on the screen) that your cinema display has a DVI input then get something like these:

  http://www.MonoPrice.com/category?C_ID=104 & cp_id = 10428 & gclid = CNSE6v7j-csCFUQkhgo dhUME1Q

  Ciao.

• Display of the weird lines on my Satellite A500-042

  When I close my screen, for example if it is less than 90 degrees from the keyboard of the laptop, the grey and yellow lines weird appear on my screen and if I move the mouse I can't see, it's just a still image with odd lines.

  I did a little video of my mistake here:
  http://www.YouTube.com/watch?v=asCBxlv4Ff0

  I also tried to reinstall the driver display and had no luck.
  I am running: Windows 7 Home

  Thanks and I hope someone can help me.

  I saw the video and my opinion is that you should contact nearest Toshiba authorized maintainer and show what is happening.
  I'm not a technician but I think that the display is faulty and must be replaced.

  I do not display driver installation help.

• display went black!

  I bought a hp laptop to November 12. In Feb. 13, the lcd screen went blank, it was in warranty, then had it changed. Now, he gives me again! However, this time notebook is out of warranty! So, what should I do?
  
  Product details:
  
  name - HP pavilion g6 2105 tx
  
  model - B6U33PA

  If she starts and displays on an external monitor, Yes, we have identified the problem as the screen. Where are you located? That will determine where I advise you to buy a replacement. eBay is actually the best source and youtube probably has a good video showing you how do it.

  Here is the Manual:

  Manual

  The screen is HP reference: 681817-001

  Here it is on eBay for about $60 shipped to the United States and this seller ships worldwide

  http://www.eBay.com/ITM/new-HP-Pavilion-681817-001-15-6-HD-led-LCD-screen-/181185509350?PT=US_Laptop_Screens_LCD_Panels&hash=item2a2f7f77e6

  YouTube Instruction video

  The instructions above are not in the manual, but it illustrates the best and easiest way to do the replacement of the screen (i.e. the way I do).

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Display went dim?

  My monitor went dim. I can still see everything - it's just dark. How can I fix?

  Hello

   
  1. who is the operating system installed on your computer?
  2 have you made changes on the computer before this problem?
  3. using a laptop or a desktop computer?
   
   
  Increase the brightness:

  Windows 7 - http://windows.microsoft.com/en-US/windows7/Adjust-your-monitors-brightness-and-contrast

   

  Windows Vista - http://windows.microsoft.com/en-US/windows-vista/Adjust-your-monitors-brightness-and-contrast

   

  Windows XP - http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/display_change_number_colors.mspx?mfr=true

   

   

   

  Thank you

• Display: convert all (of hundreds) of "view as an icon.

  How can I reduce all the icons in my schematic view of the smallest representation-that is to say the property disable "display as icon" without selecting each individually?

  Nest of puffiness someone sprawling 6 by 6 feet of son...

  Here is my version of it.  Actually one of my first attempts at writing scripts.  I used the framework that has been shown when the first script became public.  The same frame as "smashy smashy.

  Run this.  It creates a kind of background VI running.  Just having the block diagram to change active, then hover over and click on the button in this VI.  In this way, you do not have to worry about paths.

  (Since then, I've gone a step further and learned the right click context, and it is an add-on for that.)