Distortion of the envelope at the center of the only possible object?

Similar Questions

• List of resources distorted by the only 16 x CPU VM

  I thought I knew pools of resources. I thought that if I created three too high, normal and low, defining the actions to match, I would have a simple way to separate our VMs to easily distribute resources to the most important virtual machines and hold dev/test those defeated. And that seemed to work, until an above, decided to drop a giant 16 x CPU VM in the high resource pool and skew everything in his favor stocks. Now, as you can see in the photo, other virtual machines are getting hungry and having performance problems.

  

  Low, normal or high pools are all brothers and sisters and have all enabled Extensible reservations. It gave me the impression that it is also false. I should rather turn off stretch bookings, take the total number of processor and memory resources and divide them among the swimming pools, make reservations for each pool to give the high pool more resources than the normal pool and the normal pool more low poolside. It would help me with this problem? Or do I have to set a value to the action of reduction custom 16 x VM to more to distribute resources among virtual machines in the high resource pool? Or just to set actions on the 16 x VM to lowest? Obviously, it's an important VM so I don't want to starve there or a negative impact on its performance, but also I don't want to do the same for other important virtual machines in the pool of high resources.

  Help!

  Thank you

  Looks like you want to have your cake and eat it, too. 16 vCPU CPU machine needs and is therefore entitled to a large part of the resources, either it is not--and should then be the right size to a more appropriate amount.

• Distortion of the envelope of the unusual results

  I get weird results when using envelope distort in cc Illy 2015. I type some text and draw a form, select both and go to object-> envelope distort-> do with the top object and I get my distorted text, fill in the form. I can now use the direct Selection tool to change my shape and the new text warping to adapt. So far so normal. However if I now, double-click the Selection tool and enter the isolation mode in order to change the text, I don't see the original text not deformed. Instead, the cursor does his best to fit in the distorted text and I can, with some care, change the text even if it is not easy to see exactly where the cursor is. But when I come out of the isolation mode, I lost the original envelope path so I can change it is no longer. I tried using the selection tool, direct Selection tool, pen etc. as well as tool clicking on different thicknesses, etc in layers and panels of appearance with no result. When I select the object of the envelope, I see the bounding box for the original text superimposed over the distorted text so it is usable, but is this the way that distortion of the envelope is scheduled to work? If there is a way to retrieve the path of the envelope, how I would do this?

  In object > envelope distort > you can switch between the envelope edit and change content.

• Distortion of the signal caused by the channels # sampled and sampling frequency

  I am using an acquisition of data USB-6211 (250 ksps / s) and looking at the sample channels 3s 80kS. (Labview 2012)

  When I taste one channel, it looks fine (1 Channel_Sampled First_250kS), but when I add another channel to be sampled, the signal is driven down and that it depends on which channel is sampled (2 channels (Different) _Sampled First_40kS and 2 Channels_Sampled First_30kS).  Addition of channel 3, it pulls down even more.  I also noticed that the sampling rate also distorts the signal the higher the sampling rate, the more the signal is driven down.

  The acquisition of data IS sampling of signals "correctly" when I run my Labview VI my external hardware begins to read in correctly based on the distortion of the signal.

  What is the cause and is there a way to fix this?

  I have attached the waveform above captures and can post some if necessary.

  Thanks in advance,

  WBrenneman

  That's exactly what ghosts means.  The measurement signals later is affected by other signals.  It happens usually if you have a high impedance input signal.  Adding pads like you can help solve this problem by making the signal to a lower impedance.

  Ghosting would probably look worse to the frequency sampling rates higher, just as you said that you had problems, as it provides less time between samples of the amplifier set new voltage level when the multiplexer allows to switch between input signals.

• Ideas: Insert an error code or give a brief description of what you are trying to accomplish or fix.__media center tv shows only tv in the Center 3 "inches of black on both sides how I filled the screen

  Television Media Center only one tv in the dark on both sides of Center 3 "inches, how do I fill the screen e-machines 600 GB

  Hello, Russell

  Windows Media Center will use as possible while maintaining the proportions of screen space. If you have a TV screen and watch a video 4:3 standard, it will keep the bars on the side.

  You can change the level of zoom in now the keys CTRL and shift and press 'Z' to scroll through the different zoom levels so that it fills the entire screen at your convenience, but keep in mind that you will not be able to see the full image if the proportions of the video does not match your TV.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Distortion of the lens (curve)

  
  

  What software do you use?

  A lot of packages, as DPP allows to correct the distortion of the lens - some have corrections for different lenses built in.

  According to Ken Rockwell, your goal is the following distortion:

  18 mm: Strong barrel distortion. Corrected better with + 5.0, but still a bit wavy.

  24 mm: Distortion of Canon. Fix with 2.2.

  28 mm: Very slight barrel distortion. Fix with + 0.5.

  35 mm: No deformation.

  55 mm: Pad negligible distortion. leave him alone, or use-0.2.

  As you can see, it is best to shoot on 35mm if you want without distortion.

  Otherwise, a new lens is in order.

• Windows live Director, Windows moviemaker format live comverts .mst. The problem is the following parts random of the converted video has distortion in the preview to read.

  Importing a file of format HD .mst in windows live movie maker. After you import the HD Windows movie maker file to convert the file to a file that can be used. When the conversion is complete and now I can see the video in the preview window. It is part of the video with distortion in the preview to review. These same distortion are also in the video finished flagship. (By a no windows user), I was told that it is a kind of problem of buffering during conversion.

  It may be better if you convert the. MTS file to the
  . Before you import into Movie Maker WMV format.

  Movie Maker - import AVCHD files
  http://www.Papajohn.org/mm2-importing-video-AVCHD.html

  There are to many converters available on the net...
  the following links are some examples.

  Proceed at your own risk *.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  (1) format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup290.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the final screens)
  (Windows XP / Vista / 7)

  First, you will need to decompress the file or just open the
  Drag FFSetup290.exe out of the folder
  and drop it on your desktop. To install left click.

  (2) Freemake Free Video Converter (freeware)
  http://www.Freemake.com/free_video_converter/
  (Windows XP / Vista / 7)

  (3) Xilisoft Video Converter
  http://www.Xilisoft.com/video-converter.html
  (not freeware but receives good reviews)
  (Windows XP (SP2 or later) / Vista / 7)

  The following forum might be interesting to read:

  How to convert some .mts in .avi or .wma?
  http://Forum.videohelp.com/threads/285841-how-to-covert-from-MTS-to-AVI-or-WMA

• Alienware 17 R3 distortion in the right speaker

  Hello

  May 18, 2016, I got a new laptop from Alienware 17 R3 game that now drives me crazy. The laptop has Windows 10 Home 64 - bit OS, no update made when I have the problem.

  The problem: Friday, may 27, 2016 during the night, all of a sudden when I played in the world of warships, I started to hear distortion in my right earphone, this day I didn t much attention. Saturday, may 28, 2016, I tested the speakers and I can hear the distortion in the right speaker, but only in certain frequencies and most noticiable at volume high. I have Sound Blaster recon3di, if I test a sound cinema, I can hear it clearly, the problem is with sounds such as Windows and high sounds, I heard a terrible distortion in the right speaker, is like when a sound is too loud and produce vibrations. Is the same if I use headphones and loudspeakers, I have the same problem, using both.

  I've updated all the drivers, the last in the Dell Web site, regarding the audio drivers, I tried repeatedly, without success. I called today the customer and told me to send the computer to fix, they will evaluate if its hardware or software related. I know that I can't solve the problem by myself, but at least I want to know, do you think is the problem hardware or software?

  Thank you in advance, any advice or information would be greatly appreciated.

  JorgeAFC

  Do you think is the problem hardware or software?

  Usually, when you have the sound coming through the speakers AND the headphones - usually it is software, but could be material.

  What I would do, is test the audio, changing the audio driver Creative SoundBlaster Recon with the audio driver native Windows. Here are 2 ways to do this.

  1. open Device Manager (found in the Control Panel, or type devmgmt.msc in the search box).
  2. develop the 'audio controllers, video & game' and right click on Creative SoundBlaster Recon.
  3 Select this option to "Update driver software".
  4. click on "Browse my computer for driver software".
  5. click on "Let Me pick from a list of drivers on my computer".
  6. put the "Show compatible hardware" check box if not already checked.
  7. in the list of devices, click on 'High Definition Audio"(native driver).
  8. click on "next".
  9. in the update driver warning box, click 'Yes' (the driver).
  10 restart the portable computer if you are prompted. If not invited, so no need to restart.
  [To return to the Creative SoundBlaster Recon pilot, do it again but reverse steps 2-7 names].

  Sometimes this method does not work with Windows 10, then here is the other method, below.

  ================================================================================
  The other way to switch to the native audio driver is to remove all the Creative SoundBlaster Recon driver files.
  1. open Device Manager
  2. expand the section sound, video & game controllers.
  3. right click on the Creative SoundBlaster Recon and select uninstall.
  4. check the option to remove the software driver, click ok.
  5 reboot the laptop and go back to Device Manager and check again a Creative SoundBlaster Recon pilot. Keep the uninstall & reboot up to Creative SoundBlaster Recon is no longer under his... Controllers and "High definition Audio Device" appears in its place. "High definition Audio Device" is the name of the native driver.

  [The reason why you have to go through the process more than once is because the driver for several drivers Creative SoundBlaster Recon files could be on the hard drive.] When a Creative SoundBlaster Recon driver is deleted, the following is installed if Windows can locate files. Windows installs the generic driver that after all the Creative SoundBlaster Recon files were deleted.]

  ============================================================================

  If you have only the symptoms with one of the drivers, then the other is at fault. If you have the same symptoms with two audio drivers, then it is more likely to be a hardware problem.

• When I try to open any program or file the only thing that opens is Windows Media Center

  * Original title: only the open Windows Media Center

  Every time I try to open a program or file, the only thing that opens is windows media cente.ive had set up a new account just to be able to use my lappie, I have no point of restord

  Hello

  You can check out the link below and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default

  Try running the fixit and see if it helps:

  http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us

  Hope this helps,

• Latency problem causing the distortion of the sound

  I have explored a number of positions and found out that my relatively frequent distortion of the sound corresponds to a problem of latency that may occur every 15 seconds, give or take a second, higher than 29000us, but usually about 20000us.

  I disabled the common things in one by one, Device Manager without changing the latency.

  I did not have a TV tuner in the Manager devices, but uninstalled the driver of software without modification.

  dv7 4002tx No. WT507PA #ABG on Win7 64 bit

  Software added since the new one is Microsoft Office 2010 Small business Access 2010 and Windows 7 Professional

  HP Advisor said that it is up to date

  Finally, I got this problem resolved by HP. Their initial option was to ask me to re - install the image on the hard disk, which got rid of a lot of marketing software originally installed when sold, but it had no effect on the noise/latency problem

  Initially, I found the driver for ACPI-composite battery in Device Manager seems to cause the every 15 sec 20000us latency spike, because when I turned it off it, the problem disappeared. However, this driver was not what has been corrected to fix the problem.

  Care of HP phone rang finally comes with their solution, and it was as follows (and did not involve the composite battery ACPI driver). Despite the use of the HP support assistant, none of these changes has been marked.

  1. I was told to go to the HP website and download an update of the BIOS recently transferred to my laptop - everything seemed to say that it has fixed a graphics issue. This update of the bios makes it immediately fixed the problem, if there were still a few peaks of latency up to 8000us without audio effect and without that there is no regularity of appearance.

  2. I was also told to download the audio driver who had recently been transferred (since I first noticed my problem). This resulted in latency spikes never exceeding 2000us (and generally not exceeding do not 600us)

  I find it interesting that support assistant did not recommend these updates, and the audio driver is always marked as updated during the specific test, despite a seemingly better being available.

• Æ Dynamic Link is distorted in the first sequence, any ideas?

  Having a strange problem with a link after dynamic effects in my PP sequence, it was working fine yesterday until I sent to Media Encoder to render and discovered the wobbly images this morning.  The link is a small animated overlay that I use to put the chips over all created within EI, so that the linked files will not have any other footage integrated.  The AE itself file looks exactly as it should, the error in the first.  Even more strange, I have about 7 comps related from the same AE file, and the only one of them works without distortion.

  I tried to purge the memory and the cache, I deleted the first preference files and restarted everything. Currently waiting on a colleague to synchronize the project to see if its linked file or associated PC. Here is a screenshot of what the file looks like first:

  

  Here is the intact file to AE - it's just a bunch of rectangles animated shape layer.

  

  Any ideas on what could be the cause of the strange behavior in the link before you do a fresh install of apps?  Thank you

  My colleague opened the file with no problem. Purge memory once more, allowed prefs and restarted... problem solved. Although the explanation as to what was the glitch is still unknown.

• Video Copilot 3D and error messages from distortion of the heat element

  I have a problem with the 3D and plugins of distortion of the heat element. My work optical flares and contraction with After Effects. I have version 10 of Windows and CC 2015. When I choose a new composition and set a solid color. I applied element 3D or distortion of the heat to test if the plugins worked. It shows a Panel to check-in After Effects, including optical flares and the shaking never asked me to register on behalf of video Copilot.

  It displays an error message after I have shut down the Panel.

  

  How can I fix it? Brucgovn

  > How do I know the plug-ins of VC for the current version?

  You can get this information on the site of video Copilot:

  VIDEO COPILOT

• DPS web viewer - distortion at the foot of articles

  I created 2 versions of Viewer web apps and on the two items show the distortion at the bottom (see photo below).

  This happens on some articles, but nobody else. Can anyone provide a solution please?

  Thank you

  

  This is a known bug, we work to fix it in the next version. Is your article (by chance) smooth scrolling, but the length is not a multiple of 1024 (portrait mode) or 768 (landscape mode)?

• Distortion of the Lens Correction Documentation?

  I saw in some discussions that LR corrects the distortion of the lens for a few drinks and a few cameras.  I have not been able to find documentation that indicates what cameras and lenses are taken in charge for this - for LR2.3 or 3.0beta.  This documentation is available somewhere?

  Thank you!

  David

  dbritch wrote:

  I'll try a more specific question.  Any digital SLR cameras are supported by the distortion correction?

  N °

• Tasks under glass? I know I'm not the only one...

  

  I just buy my Apple Watch 30/03/16 and today I noticed these green spots under the glass and they weren't there yesterday? I did not get the wet watch and it works fine. I have reduced transparency and makes the stains disappear. I'm the only one who thinks it's ok or acceptable? Why should I have to disable the option installed by apple to make the sleep function properly? I did some research and see that I'm not the only one that this has happened? Do I have to send the watch back for a new or what is happening for all watches Apple? I really like the watch I was wondering what everyone else thought?

  Hello

  It's perfectly normal - it is not a problem or an error.

  You are referring to an intentional visual effect that is designed to repeat the contents of the underlying screen.

  The effect appears every time that see you some screens that sit on top of the other, for example:

  -For displaying Notification Center (dragging down when you view the screen of the watch face);

  -For reading a notification;

  -For the opening of eyes (by sliding upward when you view the screen of the watch face).

  -By the use of Siri.

  The underlying mirror not precisely the content of the display function. Instead, it adds a blur effect / ghosts. It can serve as a subtle, useful reminder that you are viewing - for example - looks or Notification Center, each of which can be exited by sliding downwards or upwards on the screen.

  If you want to disable this feature:

  -On your iPhone in the app shows, go to: Watch My > general > accessibility - turn on / enable the setting to reduce transparency.

  This setting stops the effect to be shown on the display of your watch.