DMA2100 do connect - HELP!

Similar Questions

• HP 1022: my HP 1022 was working fine all of a sudden I get a message "your printer is not connected" HELP

  I have a Mac my HP 1022 was working fine all of a sudden I get a message "your printer is not connected" HELP

  check the Cable Connection, if you have another pc conect printer to it and check if everything is ok.

• On a shared PC my side do not connect to the internet but side not affected spouse. I have run virus scan and none detected on its side but can't run on my side, because I can not connect help please.

  My husband and I share a PC. He has his desk top and I have mine, just that recently, I have not been able to connect to what anyone on my side of the PC, but its East side works well, it can connect to the internet, but I can't any idea what should I do? I ran virus scan and his side of own, cannot check the mine but cannot connect help please.

  Hello

  1. you remember to make changes to your computer, after which the issue started?
  2. do you have a cable or a wireless connection?

  I would recommend that you follow these steps.

  Step 1:

  Test the issue in safe mode with network and check if that helps.

  Step 2:

  Configure the connection to obtain an IP address automatically.
   
  a. click "Start", enter "NCPA. CPL"(without quotes) in the search bar and press"Enter. "
  b. right-click on the network connection, and then click "Properties".
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  c. click Select 'Protocol Version 6 (TCP/IPv6) Internet' and then click 'properties '.
  d. check "obtain an IP address automatically" and "Obtain DNS server address automatically".
  e. click 'OK '.
  f. click Select 'Protocol Internet Version 4 (TCP/IPv4)' and then click 'properties '.
  g. check "obtain an IP address automatically" and "Obtain DNS server address automatically".
  h. click on 'OK '.

  Step 3:

  Follow the steps in this article and check if that helps.

  Why can't I connect to the Internet?

  Steps are also applicable for Windows Vista.

• Connection HELP PLEASE problem

  OK, so I am able to connect to Skype perfectly fine Skype connect in and shows my contacts and the homepage but then Skype signs me immediately and gives me a screen saying you have been disconnected I don't know what to do, I changed my password, but that doesn't seem to help I even uninstalled and reinstalled but that did not help either, so if you can help me fix this bug I would be very happy

  If your Skype account is bound with the Microsoft account, then try to separate them.

  https://support.Skype.com/en/FAQ/FA12211/how-do-i-unlink-my-Skype-and-Microsoft-or-Facebook-accounts

• DeskJet 3070 on line and connected by PC tells me unable to print, not connected - help please

  I'm on a laptop with Windows 7. I recently moved the printer to a different location. I tried to print them, but in vain. I re-installed the CD and re-configured the wireless, restarted the printer and PC, but no matter what, when I try to print, my PC comes up with the printer is error offline and will not print.

  Can anyone help please?

  Go to control panel > printers and delete all instances of old of the printer.

  1. make sure the printer is on and connected to your network. Verify that you can access the printer's internal web page by accessing its IP address before continuing. Get his IP address for a network Test printed on the front of the printer.
  2. click on > start > Control Panel > printers.
  3. click on add a printer
  4. Select local printer
  5. Select create a new port and select Standard TCP/IP Port, and click Next.
  6. under device type, select TCP/IP Device. Under the name of host or IP address, enter the IP address of the printer. Click Next.
  7. Select Hewlett-Packard in the list of manufacturers and select and select your printer model. Click Next.
  If your printer model is not in the list, then select disk provided, browse the CD that came with your HP printer and select the first file begins with hp and ending with INF. click Open, then OK. Select your printer model. Click Next.
  8. If prompted, use the driver that is currently installed.
  9. He will ask the name of the printer - enter a new name or use the one existing. This will be the name of the printer that you select from other applications.
  10. we may ask you to share the printer. Choose No.
  11. the printing area of Test Page is displayed. Go ahead and print it out.
  12. click on finish.

• Connection helps XPS 8700 UZ2315H Monitor

  Using DP cable, at the entrance to DP on computer. Error says to connect to the graphics card (NVIDIA GT720 is) and that it may require a separate cable? Please help Lady with limited knowledge.  Where is the link for the graphics card and... do I need one special cable other than the DP?  If so, what cable please? Thanks in advance, trying to put together Christmas gift.

  We did not include Guide the user to a document in 10 years. These data are in Guide the user manual of the monitor online under the input Source. In fact, all our manuals are online now.

  * Go here
  * Under "Find a product", click on the arrow down
  * Click on "monitors & projectors.
  * Click on "analysis".
  * Click on "Dell UZ2315H Monitor.
  * Click on manuals
  * Click on "Dell UZ2315H User Guide" PDF
  * Go to page 44
  

• Windows 7 connection help

  Went to sign in my profile and it starts to load so I can put my password but just goes back to the main screen with profile pictures. It doesn't let me not even an option to type a password. I tried safe mode several different ways with no luck. The furthest I can enter in Windows is the profile page. (where you pick what profile to sign in) I tried all the profiles and they all do the same thing. I tried to restart of lay successful reboot and it still does the same thing. Any ideas?

  Thank you

  Looks like this possibly - bad https://support.microsoft.com/en-us/kb/3097877 updated in a few days ago, which has since been replaced.

  • Solves the problems that occurred while users are connecting to the system. For example, after that only a user rebooted the computer, and then you press Ctrl + Alt + Delete to logon screen, the screen flashed and then went black. The user is then unable to continue. There may be similar problems of logon that are related to this issue.

  Give it a read, IF this is your problem, it should help.

• Windows 7 does not send print to deskjet 932c with parallel connection, help

  I got a new hard drive installed and old a cloned.  Now, I can not print to hp deskjet 932C printer in Windows 7. Printer is connected with a parallel cable. Has worked before but not after the hard drive cloning. Help

  1. There are two ports on the Deskjet 932.  One is for a parallel cable, it has a 25 pin plug on the end that connects to the computer and a PIN 34 taken to the side of the computer.  The other port is located right next to the parallel port.   This port uses a USB A - B cable, which is what you need.  The page here can help.

  I suggest the following:

  1. Buy a cable USB A - B, the right length (quite a long time to reach the computer to the printer.)
  2. Turn the printer off.
  3. Disconnect the current parallel cable to the printer and the computer.
  4. Turn on the printer.
  5. Connect the USB cable to the printer.
  6. Plug the other end of the USB cable to the computer.

  The page here can help.

• BlackBerry smartphone Wi - fi won't connect, help?

  Hi, I am trying to connect my Blackberry Curve 8520 to my own wi - fi at home, but it does not connect to the router?

  It says to enter a PIN to the router... I watched videos on youtube and followed step by step, but yet it still does not connect, that's what I did:

  -went to the main menu

  -Click on 'manage connections '.

  -made sure that the box "wi - fi on" is checked

  -then click 'create network wi - fi'

  -Search networks

  -clicked on the network which is my router

  -and then it comes up saying

  "Provisioning profiles Wi - Fi...

  Enter this PIN to your wireless router: 18104707

  Time 04:11. »

  Could someone please help me with this problem as soon as possible?

  Thank you very much

  Kirsty x

  kirstymarieambermurphy wrote:

  "Provisioning profiles Wi - Fi...

  Enter this PIN to your wireless router: 18104707

  Time 04:11. »

  When you get to this step, press your home button (to the right of the trackpad), and you should be presented with the key method pre-shared and asked to enter the "password" of the connection to the router.

• OPM.db file is not there - unable to connect help

  I can not connect.

  Whenever I log a message says that I was disconnected.

  I tried to search for the file opm.db in the OOBE folder, but it is not there.

  I have not yet downloaded applications, and I can't until this is resolved.

  Any help appreciated

  IM on a macpro with BONES of yosemite

  Registered yesterday for CC

  I suggest that you contact our support staff, please visit the following link: Please contact Adobe customer service.

  For more information, please visit: FAQ: how to contact Adobe for support?

• The configuration of the new MacBook Pro and HP C4780 wireless connectivity helps

  The MacBook Pro OS 10.6.3 so the CD that was included in the box of C4780 is should not be used.  I need to configure settings wireless in the printer.  Can I connect the printer via USB and it prints.  All the information that I have seen and read States to use the "Printer Setup Utility" for this, but I can't seem to find it.  All required HP software is upposed to be on the MAC under 10.6.  I'm relatively new to a MAC and I tried to look around to find the utility but don't have happen what it is.  The only utilities that I can find under 'Printers and faxes' and 'Options' for the C4780 are a number of requests for test pages, ink, supplies and other levels.  Can someone point out exactly where I find the Setup utility?

  OK, I did everything above, and does not now print.  I even reset the printer IP to the IP of origin just to try again and also now works.  My printing problem may have had more to do with resetting the print subsystem and then redefine the printer for the Mac.

  In any case, I'm now moving forward with other installation problems.  Thanks for the help and suggestions.

• My router blew up... not really, but it does no permanent internet connection, help?

  Whenever I use my WRT160N V2 router, I'm constantly connected to the network and the internet (according to the network on my Vista Ultimate desktop icon)

  However, half the time I enter into a Web page or click on a link, it takes a very long time to load, and then I get the error "address cannot be found, make sure that you're not stupid, and equip enough W there.»

  I literally have to refresh about 2 or 3 times before it will come back.

  In the meantime, my applications that remain on the internet continue to run and does not give me an indication that the internet has declined. My character in Everquest II just runs and as she always does, no lag at all.

  I decided to go back to my caveman ancestry and I plugged my WRT54Gv5 (I don't really know if the version is 5 or 6, I'm rather blind) and it works better than the more recent (and more expensive) model. In fact, this works perfectly except that there is no wireless in this House (stupid concrete walls) so that if all the doors are open on the way to the other computer.

  I wonder what could cause this problem, if anyone is familiar with this, please let me know.

  It is a known problem with the WRT160N V2

  See this thread, with the review of 25 + page to this topic...

  http://forums.Linksys.com/Linksys/board/message?board.ID=Wireless_Routers&thread.ID=119107&view=by_d...

  Linksys has now re-posted the firmware "008" mentioned on the page of suppport WRT160N v2 (the "011" version caused the problem, restoring it to "008" should solve)

  http://downloads.linksysbycisco.com/downloads/WRT160Nv2_v2.0.02_008_US_code, 0.bin

• WAG320n to WRT610n connection helps WET610n bridge ethernet

  I have upgraded my network with a modem/router WAG320n and have a (ethernet bridge) WET610n in my room remotely.  Because the WET is just a single port, I would like to connect my old WRT610n router to bridge, but need to know the right settings and connection information.  The goal is to use wireless in the remote location and additional ports.

  Problem solved and improved

  Thanks Klatch,

  The WAG320n is nice, but not simultaneous dual band, so I put the 5 GHz.  I wired hard (WAP610n) one point of access to the router, set it to 2. 4 Ghz and placed about 3 meters outside the router.  This gave me access to the second floor for all devices with two bands.  (I have given it's own SSID to distinguish it from the access point).

  To extend coverage to the first floor, I installed Ethernet bridge Wireless N (WET610N) on the beach at the fringe of my output of routers (still 4 bars).  The bridge is set to 5 GHz - because what is the WAG320.  Then I connected the router WRT610N (which is simultaneous dual band) to the bridge.  You plug the bridge into a LAN on the WRT610N, NOT the WAN port port.  The WRT610 has been programmed to 192.168.1.2, disabled DHCP, NAT disabled.  I have 3 other hard WAN ports connected to devices (Playstation, Slingbox, Blue Ray player).  All other PC first floor is connected wirelessly via the 2.4 GHZ or 5 GHz bands.  The coverage of the first floor is excellent.   I held the different SSID for each router and Access Point, to distinguish which router or the band I want to connect to.

  If linksys has been only the simultaneous dual-band of WAG320, it would provide the extension of coverage to all old and new features!    Everyone is not wrapped around 5 GHz yet!  Then.  If you want to extend and use another router as Repeater (wireless), you need an Ethernet Bridge (or wireless game adapter) to the main router and connect to the secondary router.   Everything can be done with a little effort.  Thank you

• I have a sony VAIO Windows 7 laptop and I am trying to connect to a printer wireless photosmart D110a of PH. It will not connect, HELP!

  My VAIO gives me a list of printer/scanner/copiers, but mine is never on the list.  Enter the name of my atest printer page and.  all I get is about 25 pages of gibberish.

  Can anyone help?

  You install the HP printer according to the instructions from HP to help the software HP, or the installation software CD-ROM full on HP website, specific to the version of bit of the victory

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062&LC=en&cc=UK&DLC=en&sw_lang=&product=4023246#n187

  You do not use the Add Printer Wizard

• Need Internet connect help: Fusion 6, win 8

  I used 5 Fusion and had invited Windows/XP SP3 works very well. I made a copy of this virtual host and a suggestion on the VMWARE KB, I said merge that I "moved" the prompt when I started a new-, he asked if I moved or copied. He came very well and, as the guest, it has been copied since, connection Internet (NAT) has functioned well. So, I went to the Microsoft website and stayed at my $120 for a license for Windows 8. Downloaded and installed on the top of this cloned Win/XP guest. When he started upward, he told me that there is no Internet connection. I activated the license Win 8 by phone. Restarted the guest to win 8 and still no Internet connection. I changed the type of operating system Windows 8 and tried again. Same result - no Internet connection. Changed to 64-bit Windows 8. The same problem. My iMac is OS x 10.7.5.

  What the hell do I need to do to get this ^ & % $$ Windows OS to get an Internet connection?

  Thanks, Jim

  Folsom, CA

  Yes it's a kind of a clean install, not the type I'd do, but you don't listen to what I said earlier about the differences between virtual equipment of the differences between the two different operating systems.  In any case, information related to my first answer covering only the network problem so do as you wish.   Also, I can't directly answer how to create installation as I previous comments made referring to the only way that I have personally installed Windows 8... so Google is your friend on how to create a Setup program if previously linked information is not sufficient.