DN1030. Wired WiFi works but not wireless, even after moving the unit next to the modem

Similar Questions

• Saitek cyborg keyboard does not work in Windows 7, even after downloading the drivers

  Saitek cyborg keyboard does not work in Windows 7, even after downloading the drivers. It says error tent install drivers try again.

  (a) has been the work of keyboard much earlier?

  http://support.Microsoft.com/kb/258826

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

• C7250 connected wireless works with wired ethernet PC but not wireless PC

  C7250 installs fine with static IP address and wired (ethernet) PC works perfectly, but is not recognized by the PC wireless.

  Can ping the IP of the PC cable but not wireless computers.

  Can connect to the IP address of the browser and can logon to the wired PCs of wireless computers.

  When the wireless PC is connected to the network with ethernet cable the C7250 works perfectly.

  Firewall is not the issue because I tested with the firewall disabled.

  Any suggestions?

  Thank you for your help.

  I FINALLY FOUND a RESOLUTION but let me describe what I've done to isolate the problem so that others will not do the same things I did.

  I used my Windows CE PDA and connected to the wireless router. I made sure that IE could access a different print server wired for a Brother HL-2140 I 192.168.2.10 and it worked. Who checked out that IE was working with a wired device. I then went to Yahoo!, and it worked. Then, I tried to access the C7250 configuration using IP 192.168.2.20 address in IE and it failed. (I checked with my Wired PC I could have access to the configuration of C7250 via IE.) I expected this result.

  Then I connected the PDA via USB and verified that I could use it to access the configuration of C7250 use IE on the PDA and it worked.

  I then tested between two wireless PC. Could not connect to each other through the router. But if one of them has been wired and one wireless they connected and I have consulted the disks between computers. I also tested the two cables with the same results.

  THE PROBLEM WAS IN THE ROUTER.

  These tests again virtually eliminated all PC, firewalls (since I've tested with the firewall disabled), the C7250 and the print server for the HL2140 brother as being the source of the problems.

  I then updated the firmware of the router to the latest version and repeated all the tests carried out in the complete thread and had the same results.

  RESOLUTION:
  The router I was using was a Linksys WRT54GS Ver 1.

  I also had a backup router which is a Linksys WRT54GS 7 worm that had the same settings as the Router 1 worm.

  I changed the SSID of the original router (Ver 1) so I would not need to change the SSID in all my devices during testing with the router Ver 7.

  I checked the firmware on the router worm 7 was the later and pulled up.

  The first test I did was to use a ping wireless PC the C7250 192.168.2.20 and it worked!

  I then used the wireless PC and IE to access the configuration of C7250 192.168.2.20 and it worked!

  I then checked the port for the C7250 was still a TCP/IP port to 192.168.2.20 and sent a test page to the printer and it worked!

  I consulted quickly wireless configuration C7250 and printer a test of a PC cable page and that worked!

  Finally, I tested PC wireless wireless PC PCand wired PC and the dirves successfully in both directions and checked that PC wired to wired PC was still working as before.

  All that remained was to supply two routers and router swap 1 worm with the Ver 7 router and rerun the tests with the router to Ver 7 manage my real network. Everything works as it should.

  I'll keep Router 1 worm as a backup to the Ver 7 knowing router unless the router worm 7 does not only feature that I lose when I reinstall the Router 1 worm is wireless connectivity to wireless, and I can temporarily work around until I get another router that is likely to be a "n" because what is have is ' G;

  THANK YOU FOR ALL YOUR HELP PRINTDOC!

  PRINTDOC BRAVO!

• New Microsoft Windows 7 Pro 64 workload on a Folio HP book - Windows will not update even after running the tool

  I received a book of 13-2000 HP Folio damaged software.  Had to reload Microsoft Windows 7 Pro 64.  Windows is not the updates even after running the Microsoft 'tool' and 'fix it tool.  What is the last manual way to solve this problem.

  What is the last manual way to solve this problem.

  The last manual is to install the latest version of the Windows update client.

  https://support.Microsoft.com/en-us/KB/3161647

  Best regards, VZ

• Plugin Flash will not install even after installing the latest version of Flash

  When I go to a site that contains Flash content, it says "a plugin is required to view this content" and there is a link to install the plugin. In addition, there is a message at the top of the page that says "additional plugins are required to display all the media on this page" with an option to "Install missing Plugins". I click on the link to install the missing plugin, and a dialog box appears that says "the following plugins are available: ' and 'Adobe Flash Player 11.0.1.152' lists with a checkbox next to it. The box is checked, and I click on 'Next' to install. He's going through the motions and then told me that 'no plugins were installed. There is a link to manually install the plugin, which brings me to the Adobe's Flash download page. I unchecked the box for pair McAfee Security download and downloaded the latest version of Flash (to be honest, I downloaded actually this exact version even about 10 times today). The dialog box appears, I save the file and once it has downloaded, open the folder that contains (my downloads folder). I then, close all programs (including Firefox) except for the folder of Windows Explorer I want to run the installer from. I double-click the Flash Installer to perform the installation. The installation process is complete, the installer tells me that the download is successful, and my browser opens upward with a message "Successful Installation" from the Adobe Web site. Yay! My installation is successful... Orrrrrr not. Return to the page with the Flash media - always have a message saying that I need the plugin. Try to download plugin once again... no dice.

  THEN, I go to "Manage my Add-ons" thinking maybe I need to activate the plugin. There is no plugin Flash (or Shockwave) listed on any of the menus - it is as if it does not exist.

  I downloaded the latest version of Java because I read somewhere that Flash requires Java work; I installed the "add-on Compatibility Reporter" so I could force Java to be enabled. It made no difference whatsoever, best I can tell.

  I also went to the Adobe homepage where you can see what version of Flash you use (http://www.adobe.com/software/flash/about/) and it does not even show that I have installed Flash. In Internet Explorer, it shows that I have installed Flash, but it's the previous version (but this is probably due to the fact that I downloaded Flash in Mozilla, not IE, and they use different modes in each browser - so an update that you download from a browser does not necessarily apply to the other browser).

  So in summary: I don't know what on Earth is wrong here, but I'm about as frustrated that I've never been in my life. I don't know why the installation of Adobe Flash is said she is successful (it sleeps for me?), but there is no plugin appear in my menu manage add-ons, and I googled all the possible combinations of content in this message and have not found a solution that works yet.

  It seems that you have found the 64-bit version of Flash. Is your Windows 7 64-bit?

  I did read your entire post, but NPSWF64_11_1_102.dll which is Flash 64-bit; This turns into a novel when it should have been a short story.

  First, uninstall all Flash your system by following these instructions from Adobe

  • http://kb2.Adobe.com/CPS/141/tn_14157.html

  Second, get the 32-bit versions of the following. Why? Unless you use an unofficial Firefox 64-bit version, the regular Firefox is a 32-bit browser and needs 32-bit Flash.

  • http://kb2.Adobe.com/CPS/191/tn_19166.html#main_Install_in_a_firewall_proxy_server_environment
    • Download/SAVE two ways, close all browsers and then install.
      • 32-bit Flash Player ActiveX (Internet Explorer)
      • 32-bit Flash Player plugin (all other browsers)

  Third, test Flash on websites where you had a problem before.

  If this does not work, my last suggestion for you is to follow the instructions from Adobe for troubleshooting. I don't know what's happening with your system, which could possibly be the cause of the problem.

  • Troubleshooting Adobe: http://kb2.adobe.com/cps/191/tn_19166.html

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

• HP 3050 printer prints not clearly even after replacing the color and black cartridges...

  I have a problem on a HP 3050 printer all-in-one that is just a year old.  The printer is not used for several months and it was working properly before.  I tried to print a page and had missing horizontal print, I tried to clean the print heads and it did not help.  I replaced the cartridges with new ones and noticed that the ink levels showed that had the old cartridges.  Black was half full and the color was full.  It wasn't new purchased in-store cartridges refills.

  I tried to force an alignment page on the maintenance of the printer screen and this failed repeatedly, undetected alignment page.  I did some research and even tried to clean links them / connectors than cartridges fits.  Looks like that leaving the cartridges for several months in the printer was bad and that I'll need to ge a new printer.

  Thanks for the tips,

  plarr

  document here can help to solve the problems of print quality in your Deskjet 3050 has. I also suggest to clean the cartridge and printer electrical contacts as described in this document (for another series of cartridges, but same principle).

• Hello, someone would go to the WI Dept of Revenue site and under the individual and forms tabs are trying to download form 1 - ARE.  It has always worked for me; but not today even after update from Adobe which I do automatically anyway. Thanks to try to

  Problem site Internet WI Dept of Revenue

  I think that the last three comments were all correct, but I could only score a.

• vSphere ESXi ssh works, but not able to ping from the inside

  Hey man,

  I have problem with my ESXi 4.1 straing I just fresh installed on workstation 6.5 and assigned IP address. I am able to ping and ssh on my local network (another PC).

  But when I am trying to ping my local gateway of ESXi bash command line, I get the expiration time. Everything works including shared iSCSI and all but vMotion don't work. Is this firewall problem? I don't think that there inbuild firewall in ESXi.

  I am able to ping the local interface IP, but no gateway, see below.

  ~ # ping 192.168.1.1
  PING 192.168.1.1 (192.168.1.1): 56 data bytes

  -ping 192.168.1.1 - statistics
  3 packets transmitted, 0 packets received, 100% packet loss
  ~ # vmkping 192.168.1.1
  PING 192.168.1.1 (192.168.1.1): 56 data bytes

  -ping 192.168.1.1 - statistics
  3 packets transmitted, 0 packets received, 100% packet loss

  Greate that you are to the top and go.

• I can not even open FF because the profile is not found, even after using the profile in order to create a new profile.

  I've recently upgraded to version 40 39.0.3. The first upgrade was not so I removed FF using the control panel (uninstall program). I reinstalled again, but I got the messages that FF was already running, etc. as other users have noticed. I open profiles (Open firefox.exe - p) and tried to open FF with the "default" profile that did not work. I created a new profile ("defaultuser") and FF open. (I have the box checked to use the new profile on startup). I have created FF as I wanted it, and then exit. When I started later FF, the profile is not found. The profile did not have the "defaultuser" profile, does not open with the "default" profile, but would a new profile must be created and FF to open and run. Quit FF and reopen produces the same sequence (profile not found, etc.) I uninstalled 40 and reinstalled version 39.0.3 and I have the same problems with this version (39.0.3), plus he's starting the upgrade to version 40, and soon as I complete the installation again. I uninstalled the 39.0.3/40 version and reinstalled 40 using the Profiles page to write this question.

  I removed the version FF 40 using the Panel of control/uninstall. I deleted all the files that have been "* firefox *" and "* mozilla * ' (and there are some). I rebooted, and then reinstalled FF version 39.0.3. I could we FF immediately (without having to create a new profile). I have not had any problems with a bad certificate of Google, Yahoo, etc.. I went to all the web sites open very well. I could restart, then restart FF several times without problems or issues of certificate. Meanwhile, I made no changes to Kaspersky, and as far as I know, Kaspersky works as he usually does. I am almost sure that FF 40 version has a certificate problem that I can't fix. I'm less sure if the original upgrade to version FF 39.0.3 to 40.0.0 (then 40.0.2) played a role in my profile questions. Regardless, I have a version of FF that works and auto-updated to FF is off (and it will remain like that until I gather a few of this blog and other insurance which emits 40 FF are ironed out). I appreciate the help that you (and jscher200 in another thread) has attempted to provide. While the issues are not fixed, the thread can be closed.

• Does not print even after replacing the cartridges refilled with geniune ones.

  HP Officejet 8600 more all-in-one. Win 7 and 8.1

  We recently had some inkjet cartridges recharged at the shop [personal information deleted]
  Overland Park Kansas. They worked for a few days then our printer started to show error messages. Since then, we replaced each cartridge with a brand new black cartridge genuine HP, but our printer no longer works. I was wondering what kind of recourse do we have. We were happy with Costco over the years, but we hope that we don't end up having to buy a new printer. We also provide this letter to HP to see what options we have. Thank your for your quick response.

  Thanks for the information. "With this error, I suggest following the actions suggested in this troubleshooting guide: "Printer failure"Message may include a ' 0x610000f6" or "0x61xxxxxx" error Code appears on the printer.

  Since your error has an error code, you want to follow the second option in the document. I would like to know what are the results with as many details as possible.

• My MacBook is not connect to my Time Capsule to back up.  IMac my wife backup fine and our wifi works, but when I try to save, I get a message telling me to connect to the T. C. when it is available, which is never.  Help

  My MacBook Pro is not connect to my Time Capsule so it backs up.  IMac my wife backup fine and our wifi works, but when I try to save, I get a message telling me to connect to the T. C. when it is available, which is never.

  The problem started when I upgraded to Yosemite, sometimes back.  I am running 10.10.5.

  The MacBook Pro...

  Click the 'clock' Time machine at the top of the screen of the Mac

  Click Open Time Machine Preferences

  Click Add or remove from your drive

  Under the heading of backup disks, click on the drive it to highlight (probably named 'Data', unless you have changed the name of the drive)

  Click remove disk

  Close the windows

  Restart the MacBook Pro

  Click the 'clock' Time machine at the top of the screen of the Mac

  Click Open Time Machine Preferences

  Click select drive or Add or remove disks

  Choose the Time Capsule drive (probably named 'Data') by highlighting

  Click use the disk

  Close the windows

  Wait a while to see if a backup is performed

  If you want to manually run the backup, click on the Time Machine clock icon, and then click Backup now

  Report on your results. If the backup still does not work, we need the exact message that you see there.

• I have tossiba laptop when I try music on my laptop speaker works but not the headphones work even not pregnant

  I tossiba laptope when I try music on my laptop speaker works but not the headphones speakers not even extra work

  Hi rajuarman,

  -Headset works fine on other computers?

  -Have you installed the audio drivers on your computer?

  -Not the problem only occurs when trying to play music in Internet Explorer?

  Your question does contain all the required information necessary for us to help you. Please include more information to continue troubleshooting as a result.

  Please see How to ask questions and provide the information required to help others.

  In the meantime, check out these articles:

  Tips for solving common audio problems

  No sound in Windows

• I just installed an airport extreme router and WiFi works, but the status light still flashes.

  I just installed an airport extreme router and WiFi works, but the status light still flashes.

  Open airport utility... Click EI... and see what the cause of the problem. It will give the list of questions on the summary page. Click on each of them and he will offer you even solutions.

  for example the firmware needs to be updated... nothing major... or DNS is wrong or double NAT...

  Without our crystal ball, we do not know what is the issue.

• HP laptop - 15-g221au: Hi, I am not able to connect to the internet. WiFi works do not.

  Hi, I am unable to connect to the internet. WiFi works do not. not able to find the right drivers for 32 bit win.7. need urgent help...

  You are the very welcome.

  You need these drivers wireless and bluetooth.  Registered as 64-bit but the 32-bit driver files are also included.

  Driver LAN wireless Broadcom

  File name: sp69014.exe

  Software and driver Broadcom Bluetooth 4.0

  File name: sp66402.exe

• Search bar on the Macbook Air doesn't work, will allow me to load the pages of Favorites and links to these pages, but not let me google from the bar or manually enter Web sites, however, it works perfectly on the guest user

  Search bar on the Macbook Air doesn't work, will allow me to load the pages of Favorites and links to these pages, but not let me google from the bar or manually enter Web sites, however, it works perfectly fine on the guest user. Have you tried restarting and it still does not work.

  The problem should be solved now.

  Otherwise:

  OS X

  iOS

  Workaround for problems with the Safari address bar

  http://osxdaily.com/2016/01/05/fix-Safari-freezing-address-bar-use/