DNS domain and the connection to the AC network

Similar Questions

• In the Internet properties and connections and the local network settings, I uncheck the box for a proxy server, but in a few moments, the computer checks the box

  In the Internet properties and connections and the local network settings, I uncheck the box for a proxy server (because it is blocking my access to Internet Explorer), but within moments, the computer checks the box. What can I do to stop the area of the check proxy server box?

  original title: LAN settings

  Have you checked for viruses?

  http://www.eset.com/us/online-scanner/

  It is very common that the virus to do.

• N300 wireless Extender - using the Extender Network and the primary network

  Is it possible to use the wireless N300 extender only in areas where it is needed and the main network elsewhere?

  I want to be able to use to boost the signal to a smart TV via an ethernet cable, but want to use my main network in the rest of the House where I can get faster speeds.

  At the moment he seems to want to connect to all devices in the House.

  Hello elies

  If you your extensor different SSID name of your primary network, you can decided which devices connect to the Extender and those which connect to the main network.

  DarrenM

• Home computer laptop running Vista requires user name, password, and domain name to connect to my home network?

  I've had this laptop for 3 years with no problems. One day last week when I tried to connect to my network home as usual, I get a message saying: more information needed, and he asks user name and PW domain name. All other wireless devices work as usual, only my Vista laptop. I never set it to connect to a domain. If I try to manually remove and reconnect to the network I get the same error. How can I remove this domain setting so I can connect to my home network as usual?

  All the most popular tips...

  PS You may have guessed that I am no computer wiz!

  Thank you very much

  Hello

  Look at the configuration in Control Panel / System.

  See here http://www.ezlan.net/Win7/group_name.jpg

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• Automatically by turning and the wifi network?

  Is it possible to create a guest wifi network that automatically turns on market every day at certain times?

  Sorry, but no.

  However, there is a way to control the hours of each day that a wireless device would be authorized to connect to the Guest network.  For example, an iPad has to connect... Every day... Between... 08:00 and 22:00.  the iPad is not able to connect to any other time.

• Optimal, set up for the airport and the power network line?

  Hoping to any network gurus can advise on the optimal configuration for my network.  Current configuration is as follows.  1 Zyxel DSL modem configured to act as the router, PPPoE (not the bridge mode) mode, which is the default value.  2. Airport Time Capsule (ATC) connected to the modem via an ethernet cable plugged into the WAN ATC port.  ATC configured in Bridge mode.  Adapter network line connected to the LAN of the ATC port.  2nd line network adapter is connected to the opposite end of the House where the Time Capsule wireless signal is weak to non-existent.  Airport Express (AE) plugged into 2nd network adapter line.  I have a lot of devices (computers, printers, cell phones, DVR, etc.) which must connect wirelessly to the network.  Here are my questions:

  1. is it better to act as the router, rather than on the bridge, as I have to reconfigure the modem in Bridge mode and the most convenient way to connect using PPPoE Airport Airport?  Or is it not important?

  2. my hope is that by using the network adapters and the AE in the part of my house with the worst WiFi signal, I can push the range of my network and all devices to give a good signal.  My hope is that the devices will be connected to any signal is stronger.  At present, ATC and EI do not have the same network name (or password).  It is better for them to broadcast 2 differently named networks, or both would be they networks of broadcast with the same name and password.  Or is it not important?  Is how important it that the ATC is able 802.11ac, EI is just 802.11n?  For reasons not clear to me, even though I have several 802.11ac devices (MacBook Pro and Nexus5x), they are on the 2.4 ghz band (I even if ca is the 5 ghz).  Don't know if something is set up wrong on my ATC.

  All the equipment is running the latest version of the software (OS X, iOS, Android, etc.).

  Thanks for any advice.

  1. is it better to act as the router, rather than on the bridge, as I have to reconfigure the modem in Bridge mode and the most convenient way to connect using PPPoE Airport Airport?  Or is it not important?

  Doesn't matter, unless there is a special feature like the network option of comments on the airport... that would require that the airport be configured as router.  Airports are not known for their reliability, PPPoE, so it is best to have the modem or modem/router to provide the credentials of the PPPoE connection.

  2. my hope is that by using the network adapters and the AE in the part of my house with the worst WiFi signal, I can push the range of my network and all devices to give a good signal.  My hope is that the devices will be connected to any signal is stronger.

  If the two access points use the same wireless network name and password, Mac will do a nice job of automatically move from one access point to another to pick up the best quality signal as they move home... but iPhones, iPads, and most of the PC will not.  If you name the two networks as well, so you will need to get used to temporarily disable WiFi on iPhone, iPad, etc. When you move from one region to the other. Then, when the device is in the new location, turn on the WiFi and the device usually pick the strongest signal from the nearest access point.

  If you use names of separate network for access points, you need to manually switch networks on each device whenever the camera moves from one region to the other.

  Is how important it that the ATC is able 802.11ac, EI is just 802.11n?

  Well, you know that the Express is not "ac" capable, so any device "ac" close the Express will connect at low speed "n".  You will probably not notice a difference in respect if your Internet speed is less the Express features.  If you copy large files from one computer to another or backup on the network, then a device that connects to the Express is going to be slower than a device capable of "ac" that connects to the ATC.

  For reasons not clear to me, even though I have several 802.11ac devices (MacBook Pro and Nexus5x), they are on the 2.4 ghz band (I even if ca is the 5 ghz)

  Everything in the wireless is a compromise. In other words, to get something, you must give up another.  "ca" is used to that in the band 5 GHz, so if your devices are connect 2.4 GHz, they connect to a slower 2.4 GHz signal.

  Here is the compromise...

  5 GHz signals have capacities of speed much higher than the 2.4 GHz signals... BUT... 5 GHz signals are significantly weaker than the 2.4 GHz signals. So you're really not going to get the benefit of 5 GHz, if your device "ac" is in the same room or it has line-of-sight with the router "ac".

  If a device of "ac" is a room or two away from the router "ac"... the device will probably connect 2.4 GHz... because these signals are more powerful penetration of walls and other obstacles a lot better than 5 GHz can never hope.  It is also possible that the 2.4 GHz signal several rooms away the router will also be the fastest signal at this location, because the signal slows down more it moves the router.  5 GHz quickly signals really slow down.

• Connected to wifi but not internet access and the unidentified network

  I can't connect to internet, I need quick help.

  Hello

  This screen that you took the photo, there should be a small link somewhere that says "view log" you can copy the text of the log file and send it to me?

  In this photo, however, the only thing I see is Homegroup questions, which are not generally associated with internet connectivity... but who knows?

  You can try to manually start the Homegroup provider service. To do this, go to the search box of the start menu and type services.msc and press ENTER. Find the services marked "Homegroup Provider Service" and "Listener Homegroup" Double click on each one and set to automatic startup type. Restart your computer. Let me know how it goes.

  One more thing to try is to clear your cache of DNS resolution. At the beginning of the search box go menu, type cmd and press to enter. Type ipconfig/flushdns press on enter, and then restart your computer.

  I hope this helps!

  Mithrandir

• Windows/Linux and the knowledge network Admin system is essential for VMware Admin?

  Hello

  I intend to secure Channel.

  Kindly let me know if I need to know how to configure the routers/Windows or Linux networks as well outside learning VMware Vsphere stuff?

  I am currently working as an Admin(mainly EMC SAN) storage, but I have very limited OS related knowledge when it comes to the network portion. I've never set up a domain controller, or configure a router or configure anything on a network.

  Ask that someone please let me know what all should study before I try to set up a laboratory at home to study for VCP?

  Or, frankly speaking, it would be better for me to not to pursue the VCP right now? Because what's the use to become a VCP, but not being able to implement networks etc?

  Please let me know.

  I think the best vSphere admins/engineers are those who have an appreciation/understanding of the layout of network, storage, servers, operating systems and applications - all the technologies that sit above and below where virtualization is located in a modern data center.

  I was the opposite of you in terms of skills/background when I learned about vSphere and that I had made only small pieces of networking - but I made sure I raised my own bar in this area and has learned a good amount of storage as part of my development.

• Pavilion dv7 6c70el: drivers PCI and the Wifi network?

  Hello
  I recently formatted my laptop and when I reinstalled I noticed that I miss 2 pilots:

  -Wifi pilot
  PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C & REV_01
  PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C
  PCI\VEN_10EC & DEV_8176 & CC_028000
  PCI\VEN_10EC & DEV_8176 & CC_0280

  -Pci (maybe?)

  USB\VID_138A & PID_0018 & REV_0078
  USB\VID_138A & PID_0018

  Can someone help me?

  Hello:

  You need these drivers...

  WiFi:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5060882&swItemId=ob_105197_1&swEnvOid=4058

  Fingerprint sensor...

  This package contains the driver that allows the validity fingerprint sensor in the notebook models that are running a supported operating system. The fingerprint sensor analyzes fingerprints for use with biometric security applications.

  File name: sp56169.exe

• What wireless router and the wireless network card can I use with my Satellite 1800?

  TOSHIBA SATELLITE 1800-314
  I NEED TO KNOW WHAT WIRELESS ROUTER SHOULD I BUY AND PC CARD I SHOULD BUY.
  MY CD/DVD ROOM DOES NOT READ DVD. Thank you.

  Router is not relevant at all. You can use what you want. Interesting is what WLAN card on your device is installed.

• ESXi 4.1 and Virtual Connect (Flex 10): no network statistics

  Hello

  I use ESXi 4.1 (build 348418) on HP BL460G6 (c7000 enclosure), with HP Virtual Connect servers.

  I am satisfied with the introduction, and everything seems to work. (traffic comments vMotion, StoragevMotion, etc.)

  However, when I look at the tables of performance in vCenter, the performance of network information shows nothing.

  Each vNic, every statistic is 0.

  When I asked on the HP Veforum 2010 stand in Sydney, I found that they were the same thing! (but they did not know why).

  Everyone has found and overcome this problem?

  I applied all the tasks that I can find, but it remains the same, and I'm WonderingWhy.

  Thank you!

  I had the problem and used bnx2x - 1.62.15.v41, 2nd in the link.

  It worked for me. I hope this helps!

• How to connect my virtual domain to the Internet through my host?

  Hello

  I set up a domain with a network bridge windows environment. My problem: I can not connect to the internet. This is my setup:

  Env of the HOST:

  IP: 192.168.178.x (DHCP)

  Gateway = 192.168.178.1

  DNS = 192.168.178.1 Server

  VM (Briged):

  IP address: 10.0.0.1 - 10.0.x.x

  Subnet: 255.255.0.0

  Gateway: 192.168.178.1

  DNS: 10.0.0.1

  The DNS server for the virtual network must be set to 10.0.0.1 cause I have a windows with the running dns server domain controller and clients that connect to it.

  When I change the dns on the VM to 192.168.178.1 server while everything works. But when I change it back to 10.0.0.1, and then it doenst work.

  How I do that my virtual network can connect to the internet? Whats wrong here?

  I'm not a networking expert, I am a developer

  concerning

  Yavuz

  Assuming you're running Windows 2008 R2, open your server DNS 'properties' and add your router address physical 192.168.178.1 (which I assume is a DNS redirector too) to the "Forwarders" tab Also, check the box for indications of root on this tab.

  André

• OfficeJet 6600 connects to the wifi network

  Hello

  I bought an Officejet 6600 and effortlessly connected to my wifi network, print and scan for a day. And there are two days that he stopped conntecting to the wifi network. In the meantime, our router turned off and turned back on. That's the only difference.

  First of all, the printer would not even detect the wifi network. I solved that by changing the configuration of the router (Cisco 3925 EPC) and passed under the Setup wireless "Wi - Fi protected setup" to "manual". I can now see the network on the printer again.

  But after that I've selected my wifi network and enter the WPA password, the printer tells me that the network connection is impossible. I printed a page of diagnosis, which told me that the problem is perhaps related to the MAC filter. But I have no MAC filters. I also tried to pass of WPA/WPA2 to WPA only, but that doesn't change anything.

  I also tried to set the mode wireless via the USB cable, but no avail. Everything seems to work, until the moment when he tries to connect to the wifi (screen with 'configuration' with the large antenna and pulses of radio waves).

  Should I give up and bring it to the store? I'm getting desperate!

  Thanks for your help in advance,

  Raphaël

  OK, to make sure I understand - the printer connects effectively to your wireless network, and well it works for a while once the printer goes to sleep, your computer or router may not wake.

  If this is the case there are a few things that we can try:

  1. in the settings of your router, make sure that the multicast is enabled.

  2. set the 2.4 GHz router to 11 channels.  I know it sounds weird, but please try.

  3. set an IP address of the printer:
  
  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') 250
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway.
  -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS. It's Google DNS. You can choose a different external DNS if you wish.
  -Click 'apply '.
  
  Now, stop the router and printer, start the router, wait, and then start printing.

• determination of the sampling rate and the frequency waveform data record

  Hello

  I write a simple program that collect data from a triaxial accelerometer input, convert it to a frequency spectrum, and then save the time domain and the frequency of the waveforms in an external file separated.  I don't understand how to set the sampling frequency, however.  On the DAQ Assistant, I updated the acquisition mode "Samples continues" and read samples is 2 k, which corresponds to the total number of data points that are collected.  How can I program sampling for awhile, it 30 seconds, for example?  Wouldn't be better to set up a trigger, as it will continue to collect data up to what I told it to stop?

  I also want to save waveform data in a separate file that can be easily seen by other computers that have not installed Labview.  I have currently the program put in place to convert a text string of the waveform of the time domain and then save it in a text file or a spreadsheet.  It works fine, but I would also like to record the frequency wave, which is a different type of data.  How can I do this or is there a better way?

  My program is attached.  Thanks for your help!

  Here's how you can use the shift register to build the table, and also where you can choose to play exactly 100 samples per while the loop iteration.

  

  Brian

• problem connecting to the wireless network, but it worked yesterday.

  Yesterday, I was able to connect to my home wireless network, but not today. I also have a laptop and it connects to my wireless network, there must be something with the RT of Surface.

  Home Wireless works, why can't connect?

  Your post is off-topic in the forum Feedback, I moved it on the forum of "Web and Networking" Windows RT.