How to connect my virtual domain to the Internet through my host?

Similar Questions

• How to access my virtual machines to the internet

  Hi all

  IAM running VMW 6.05 I 10 vm running inside my host is xp professional and I don't want to make RDP for this host because who will sign him out because that simply allow 1 rdp connection

  I need to access my two Linux Vms from the internet but don't know how preinstalled Vmware network is configured in Bridge mode they get internt via dsl on the host pc connection and its dsl mode is configured for PPPOE mode

  Thank you for your kind suggestion and solutions

  Thank you for your support

  Ashu

  The instructions are router very specific, so your mileage may vary.

  On my linksys router, I connect to the management interface, go to the Applications and Gaming tab to configure your port forwarding.

  There are a few choice integrated but you can go on the empty area and create your own.

  There, type in ssh_vm1, select the external port (it is the port you will use to connect to internet) and then inside port (SSH, it is 22), then IP address internal and check active.

  Do the same for the ssh_vm2, and you should be good to go.

  Now, you will need to find your external IP address as well to connect to the Web address that was assigned by your ISP.  You can reach a site, like ipchecking.com, and your address is in the right hand corner.

  -KjB

• How can I make online games access the internet through a proxy server?

  I currently have to use a proxy server to access the internet. I changed my browser settings to do this, but I can't play a game online that I instaled because they are not defined for internet access via the proxy server.
  How can I make games use the proxy server to access the internet?
  Help, please. See you soon!

  Abstergo,
  You will need to have the proxy server configured to allow ports looking for the game or, if the game has the option, you can put in your proxy server information in the parameters of the game.
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unable to connect to the internet through a host mac

  2 weeks ago, I wasn't able to get on the internet. Fact diagnostic the test on my laptop and it said I had no internet access.  The Mac host in our home is ok and can connect without any problems. I tried several things and that you still can't find the problem. Any suggestions?

  Hello

  1 have had any changes made on the computer before the show?

  2. do you get an error message? If Yes, what is the full and exact error message?

  Method 1:

  Check the link and try to run the troubleshooter to check if it helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  Check the link and see if it helps:

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Let us know if it helps.

• How to access Windows 8 PC on the Internet with remote desktop connection?

  Hello

  Can someone tell me how to access Windows 8 PC on the Internet with remote desktop connection?

  I'm good with the software and I have used many Microsoft software since the 1980s. So I like Microsoft products, but since they have outsourced their tech support, you can't support quality even if you pay for it. I followed all the instructions in the Windows 8 will help about DRC setting screens, but I can't connect unless I'm on the same home network. Here are the details:

  I have a desktop PC with Windows 8 Pro and I have authorized the DRC. I tried two settings in system properties:

  1. Allow connections to this computer remotely.
  2. That allow the connection of computers running Office remotely with authentication NLA.

  I also turned on both private and Public Windows Firewall settings > allow an App or feature through Windows Firewall.

  I have installation then DRC to my laptop with Windows 8 (standard edition, not the Pro version). I have a DRC using the full name of the computer and other DRC using the static IP address for my ISP Desktop connection.

  I use the user account administrator Windows for connections of DRC of the laptop.

  I cannot get this to work on the Internet from a location outside my house with another ISP connection. The only way it works if I'm uncomfortable with the laptop using the same network home.

  I called Dell tech support and it is always useless and just a more aggravating waste of an hour to talk to their support of technique outsourced in India (who barely even understand English) and then they hang up the phone as it was supposed to be disconnected. I also called Microsoft support and lost more than an hour to speak to their outsourced tech support in the Philippines (and as support of the India, they hang up or 'disconnect' when they cannot answer your question and they go account learn you more about Windows while they do). U.S. tech companies use AMERICANS more for their technical support so their customers can get people who actually care about doing a good job and can actually understand English?

  So if someone who knows using Windows 8 for DRC on the Internet has some tips, then it would be greatly appreciated.

  Thank you!!

  P.S. If anyone is offended by my comments about the ugly, incompetent, stupid providing "technical support" in India or the Philippines - Nevermind! You go ahead and waste hours of your time talking to some Morón in these countries, who barely understands English and then 'disconnects' the call when they know that you realize that they are clueless and have all the answers.

  Take a look at no - IP.com or dyndns.com, and then use your host.domain:3389 of no.-ip/dynDNS or run RelaVNc SErver that is running on port 5900 by default.  Server options allow you to change the port as well if necessary.

• How can I connect to the internet through the dial upward through the computer another internet connection?

  If you want to tell me that MS will not support Windows 2000, please do not post. The computer on which internet Wi - Fi Connection has Windows Vista Home Basic on it. The computer that has WiFi but I want to test its dial-up access windows 2000 top. It has WiFi with utility that is necessary. It includes 12 Opera browser. As a resort last, if it is not possible at all means, ultimately, let me know how to connect to the internet through another computer via the telephone line through Internet connection sharing or network connection. Any help will be greatly appreciated. Remember, this is on the internet. Not on whether or not Microsoft does not support Windows 2000. If you tell me how it is not supported, please do not post. Internet connection will be between the two modems and two computer on Windows 2000, it has a LT Win modem and the Vista Home Basic has a CX110 in generation something like this modem. I ask this question is because my land line will not dial a number. I would like to test a dial, and if you tell me how it's slow, I use DC Unlocker to a broadband speed, so it won't be slow. Any help will be greatly appreciated. Windows 2000 has an Ethernet port.

  Hello

  1. are you referring to Windows Server 2000 or Windows ME?

  If you are referring to Windows Server 2000, please help the professional community of COMPUTING in the TechNet forum below:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  http://support.Microsoft.com/ph/1131

  If you use Windows ME, visit the below mentioned link.

  http://support.Microsoft.com/kb/234815

• How to connect & activate external speakers to the Windows 7 desktop PC

  How to connect & activate external speakers to the Windows 7 desktop PC?

  Can't get PC to recognize external speakers

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that the PC recognizes not the external speakers.

  This could be due to hardware conflicts.

  I suggest you to refer to the suggestions of Fahimulla K replied on March 4, 2010 and check if that helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/Windows-7-wont-recognize-my-external-speakers/60865d58-1742-4AE8-b0f1-c623f2285907

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• How to connect NEWSPAPER of INFORMATION to the table of the newspaper so that the operation of ROLLING BACK of the user?

  How to connect NEWSPAPER of INFORMATION to the table of the newspaper so that the operation of ROLLING BACK of the user? any example?

  Fjean wrote:
  What is the independent procedure/function?

  You can create stand-alone procedure to record messages even if the transaction is rolled back messages is stored in the table and are committed.

  Example of

  SQL> DECLARE
    2    PRAGMA AUTONOMOUS_TRANSACTION;
    3    emp_id NUMBER(6);
    4    amount NUMBER(6,2);
    5  BEGIN
    6    emp_id := 200;
    7    amount := 200;
    8    UPDATE employees SET salary = salary - amount WHERE employee_id = emp_id;
    9    COMMIT;
   10  END;
   11  /
  
  PL/SQL procedure successfully completed.
  
  ---log_error procedure
  -- Table Err_tab ( seq number , time_stamp date, message varchar2(4000))
  CREATE PROCEDURE log_error (p_message VARCHAR2)  AS
    PRAGMA AUTONOMOUS_TRANSACTION;
  BEGIN
    INSERT INTO Err_Tab(seq.err_seq,SYSDATE,p_message) ;
    COMMIT;
  END log_error;
  /
  
  -- You can use this procedure to log
  -- error messages as follows in a transaction
  BEGIN
    log_error('Start emp update') ;
    UPDATE emp set
    log_error('End emp update');
  EXCEPTION WHEN OTHERS
    log_error('Update Error '||SQLERRM);
  ROLLBACK ;
  END ;
  /
  Even in case of Rollback error messages will be inserted to log table 
  

  SS

• How to connect HPdeskjet 2546 printer to the HP slate 21 Tablet

  connection between HP DJ 2540/slate21

  Hello

  You cannot connect through a USB port, so you will need to print to connect wireless networks using either the 21 slate and the printer on the same wireless network in your home or you also have the choice of wireless direct printing.

  If it is available, I always find the connection for the network devices wireless easier than printing directly home.  To do this follow the instructions that came with your printer to connect to your home network.  I also suggest following the instructions of ePrint must also be provided.  Then connect your tab 21 for the same wireless usinf settings > > Wifi.  Once this is complete, you should be able to use the print option available in configurations for some applications, the HP ePrint application or Google Cloud Print,

  As said the other option is direct wireless printing.  Follow the instructions on your printer to set up.  Then now you slate 21 go to settings > > Wifi and choose to connect to your printer.  Then you should be able to print option available in configurations for certain applications or the HP ePrint request to print.  The disadvantage of this method is that you cannot be connected to your printer and the internet, so it's a bit restrictive.

  I hope this helps.

  Kind regards

  COWA

  HP employee

• I can't connect to the internet via my host after uninstalled antivirus software and restart

  I can't connect to the internet via my host after uninstalled antivirus software and restart it.

  I use windows xp on my host computer and all computers in my client. After that I uninstalled the free trial NIS version and restart my host, I lost the internet connection. Tried to restore with the restoration of the system, but when I restarted it, it said the system restore could not be made. I changed it then with my laptop and I can connect to the internet as the host.

  Hello

  This can happen if the uninstall process fails and leaves behind a Symantec registry value. See the following Symantec article.

  Unable to connect to the Internet after uninstalling Norton AntiVirus.

  http://Service1.Symantec.com/support/NAV.nsf/8d071816eedd7cac88256c0e005a96e5/751c3298ab99cf7188256d34006702e2?OpenDocument

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows?

  322756 (http://support.microsoft.com/kb/322756/ )

• connect other computers to the internet through an ad hoc network of a connection__ broadband windows 7

  I have a HP netbook with a Windows 7-based broadband connection.  I created a residential group of this netbook so other computers running Windows XP can connect to it and use the connection Strip.  I have inconsistent results.  Sometimes it works and sometimes not.

  My question how do I set up a gateway to the internet from the netbook to other computers can access the internet.

  Do I need to set up a network of residential group for this place?  Is there some settings of internet connection of the netbook I need to change (for now that I disabled the firewall, so it does not interfere).

  Thank you

  I do not use a router.  My netbook has a map broadband and a wi - fi card.  Simply, I connect to internet through my broadband card.  I tried other computers to be able to access the internet through that connection, that's why I've set up homegroup (maybe I would not do?)

  Anyway, sometimes it works but is not for most.  I'm trying to keep it simple and not get a router, etc. since it is a situation that's going to happen from time to time.

  Thanks for responding!

  Paula

  As posted earlier...

  To use your netbook as access wireless router/AP watch these GUI frontends to netsh commands that will do this for you. I do not think that you have ICS enabled to do so.

  http://virtualrouter.codeplex.com/

  http://www.Connectify.me/index.html

  ICS, in my experience there is a very long time is flakey at best...

  FWIW, there are routers broadband accepting adapters broadband videophone/USB/etc function for example. According to what broadband service, you have maybe one depending on your needs.

  MS - MVP Windows Desktop Experience
  "When all else fails try what the captain suggested before you started...". »

• Hang a new virtual machine to the Internet

  All virtual machines that I downloaded connect to internet automatically when I their fire upwards. I downloaded a new machine virtual de VulnHub, specifically BrainPan2. It does not connect to the internet automatically even if it is supposed to. It's a vulnerable VM installation for security penetration testing. Now, I start my VM Kali, do a scan of the network and see all my computers. I'll start a VM unrelated, rerun the scan and check the other appears. Now I launch BrainPan, run the scan and nothing. I don't see on the scan.

  I read several guides associated with the virtual BrainPan2 of the internet machine, and everyone seems to be able to plug in and go. On the site of the BrainPan: 'import brainpan2.ova into your privileged hypervisor and configure the settings of the network to your needs. It will get an IP via DHCP, but it is recommended that run you to the breast of a NAT or visible by the host only operating system because it is vulnerable to attack."

  So, I put the virtual machine to run on NAT, connected by a bridge and also host. I can't detect the virtual machine by any means, it just is not auto-connect. And I can not connect and plug it as he did to hack.

  Does anyone have any suggestions?

  Hi John,.

  I'm using the regular VMware Fusion, not Fusion Pro. Fusion Pro is a virtual network editor that could help; I do not know. Just for fun, I downloaded BrainPan2 VM, and it worked only. Here are the steps I took:

  • Go to Brainpan: 2 ~ VulnHub
  • Click Download, which exposes the download link.
  • Download the file brainpan2.zip and unzip it.
  • Check the integrity of the downloaded file brainpan2.ova. In terminal, type 'openssl sha1', and then drag the file brainpan2.ova to the Terminal to fill in the full path of the brainpan2.ova file. Press return. Compare the sha1 hash in the terminal with one on the web page of the BrainPan. If they do not match, try again download.
  • Open VMware Fusion 8 and choose file-> import. Drag the file brainpan2.ova to the window. Click on the button continue and save the converted virtual machine. VMware Fusion will display a progress bar as it converts the file .ova. It took a few minutes on my Mac. Once the conversion is completed, you will see a window Finished.
  • Click Customize settings.
  • As part of the network card, select private to my Mac.
  • Start the virtual machine of BrainPan2. I don't bother to upgrade the hardware. You will see a login prompt, which I ignored. The BrainPan2 virtual machine will get an IP address from the DHCP server on VMware virtual network.

  Optional:

  • Open the BrainPan2.vmwarevm file in the Finder. Right-click to display the contents of the package. Open the vmware.log with a text editor like BBEdit or TextWrangler or even TextEdit. Search for "192.168" and you will find two entries to the VMware virtual networks. On my system, the private sector in my Mac network was vmnet1 to 192.168.166. * (I guess that the other network is the "share with my Mac" NAT.) He was appointed vmnet8.)
  • Close the log file.

  Instead of Kali Linux, I used one of my virtual machines in OS X, because it was very convenient. (My Kali Linux virtual machine are saved on an external drive). The virtual machine of OS X I used runs El Capitan, but any version of Mac OS X.

  • Take a snapshot of the OS X machine for two reasons: (1) to maintain its normal parameters and (2) because I don't trust the BrainPan2 virtual machine to not attack the OS X machine on the VLAN.
  • After the snapshot set network configuration of the virtual machine of the OS X private to my Mac, so that it is on the same virtual network as the virtual machine of BrainPan2.
  • Start Mac virtual machine. In the terminal, type "ifconfig en0" to see its IP address on the local network deprived of VMware. There are other ways to find the IP address, of course. My virtual machine to OS X has been awarded 192.168.166.129, so I figured though the virtual machine of BrainPan2 has been assigned to 192.168.166.128, which proved to be just.
  • If it is not already installed, download nmap or Zenmap or tools of everything that you need. A Kali Linux preinstalled.
  • Run a scan of the LAN ping. Example: ' nmap - sn 192.168.166. * "you should see the virtual switch to 192.168.x.1, your virtual Kali Linux or OS X machine and the virtual machine of BrainPan2 (mine was 192.168.166.128 as I suspected). The virtual machine BrainPan2 responds to the pings.
  • At this point, I ran a scan of port of the virtual machine of BrainPan2. Not wishing to spoil your fun, I will only say that I found the open ports on the BrainPan2 virtual machine.

  Don't forget to restore your virtual machine OS X (or Kali Linux) to the previous snapshot once you are done with BrainPan2, if nothing else, but to restore access to the Internet by moving out of virtual private LAN.

  I hope this helps. Please let us know if you are able to make it work. I hate to write solutions and then never discover what happens then.

• My connection between my PC and the Internet.

  MY CONNECTION BETWEEN MY PC AND THE INTERNET.

  I sent a message yesterday - don't know if I got a response.

  My question is that something is wrong with my internet connection.  He died in line every 4-10 minutes of use.  I bought a new computer because my technician told me that I had a bad virus on my PC.  But now I have a new PC but my problem remains.

  Can what tests I do to see if the problem is with my wireless router, the Arris modem provided by Comcast, or something else.

  Please help me.

  Dave Fox

  my main email is , but I think I have the address of e-mail as .  so when you meet me you you the man or the other.

  But please reply to this email.

  You have the same problem if you connect directly to your router?

• Salvation; I instaled a new Windows XP Home edition on my computer hp laptop, but it's not conect to the internet through my wireless card.how can solve this?

  Salvation; I instaled a new Windows XP Home edition on my computer hp laptop, but it's not conect to the internet through my wireless card.how can solve this?

  Did you use the recovery process HP plant or install using a different operating system disk? If the latter, you need to install the drivers for all your hardware, including drivers for wireless network cards. You will get only the pilot specific support for your laptop model HP Web site tech.

  If by "wireless card" you mean that you have a 3G USB modem through your cell phone provider, contact the cell phone provider for help with that. MS - MVP - Elephant Boy computers - don't panic!

• Unable to connect to the internet through WRT110

  Hello

  I can't connect to the internet through my WRT110. I am connected directly but my modem at this point shaw. My DHCP settings will not retain an IP address. I'm going to status on the router (192.168.1.1) and find all information, IP address, subnet mask, Gateway etc. Defautlt are set to 0.0.0.0. I click on the intellectual property of release, then renew the ip and that everything remains as 0.0.0.0.

  I tried to set my router to static mode and entering the information in bold to ipconfig below, but which does not either. I also tried to reset the router back to factory default and tried everything on again, without success.

  What I'm doing wrong here?

  IPConfig:

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. : vc.shawcable.net
  Link-local IPv6 Address...: fe80::c056:e161:d17f:3 b 09% 11
     IPv4 address...: 70.79.143.236
  ... Subnet mask: 255.255.252.0.
  ... Default gateway. : 70.79.140.1.

  Tunnel adapter ISATAP.VC.shawcable.NET:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. : vc.shawcable.net

  Card tunnel Local Area Connection * 11:

  The connection-specific DNS suffix. :
  IPv6 address: 2001:0:4137:9e50:3 c 46:300 d: b9b0:7013
  Link-local IPv6 Address...: d fe80::3c46:300: b9b0:7013% 13
  ... Default gateway. :

  Card adapt 6TO4 tunnel:

  The connection-specific DNS suffix. : vc.shawcable.net
  IPv6 address: 2002:464f:8fec:464f:8fec
  ... Default gateway. : 2002:c058:6301:c058:6301

  Decreed a second IP address of my modem and I could contact my ISP. My router works now after power off.