DNxHD works only with the first in my PC? Desperately need help!

Similar Questions

• BlackBerry Z10 PrintToGo works only with the new version of OS 10

  Am unable to load files using PrintToGo from the new version (10.1.0.4181) installed.

  Worked fine with the previous version and works with the Playbook (2.1.0.1526)

  PrintToGo error log:

  PrintToGoDesktop.exe Information: 0: 09/02/2013 11:33:52 - TCPClient.BeginConnect (using ServerIP:192.168.2.102, ServerPort:80)
  PrintToGoDesktop.exe Information: 0: 09/02/2013 11:33:52 - TCPClient.EndConnect)
  PrintToGoDesktop.exe Information: 0: 09/02/2013 11:33:52 - connected successfully!
  PrintToGoDesktop.exe error: 0: 09/02/2013 11:33:52 - Z10 (2ABE5757) cell phone: EXCEPTION RAISING - System.NullReferenceException: object reference not set to an instance of an object.
  on the EDGE. PrintToGo.UserInterface.Device.UploadPDFFile (String fileTransferURL, String fileName, BackgroundWorker bw, DoWorkEventArgs e)
  PrintToGoDesktop.exe Information: 0: temporary removal PostScript file 'C:\Users\Paul\AppData\Local\Temp\PtB1360.tmp '.

  Resolved, had to repair the Z10 with the PC!  Would have thought that upgrading software would have saved the environment so that this step was not necessary (played with this for several weeks and market).

• Samsung 850 EVO Solid State Drive works only with the MacBook Pro - Solution?

  I recently bought a Samsung 850 EVO 500 GB Solid State Drive for mid 2012 MacBook Pro father. The computer was working properly, but it was just very slow. I took the old drive and installed the SSD. I took it to an Apple store so that they could install the OS. A guy at the Genius Bar met with me and first tried to install the OS via the Ethernet cable. It is impossible to install some general error. He then tried to install it on a disc. Which also failed. He said he was not familiar with the type of error that he saw. But he said it was a mistake 'bad '. He said he saw the SSD for my SATA cable worked. He concluded that the reader must be defective. I explained how it is virtually impossible because they have a rate of close to zero. He said: "well they are produced en masse" and explained how they could install a hard drive themselves for some too expensive price. A bit annoying.

  In any case, I took the SSD back to my house and threw it in my desktop PC. It works very well. Then what should I do? Why am I not able to get the SSD to install it? From what I read, the Samsung 850 EVO should be compatible with a MacBook Pro 2012. Can I do to install it at home? Is that all I can say people at the Mac store to help them along?

  Most likely, the drive is formatted for use with Windows computers. First step would be to format correctly for Macs.

  This is Mac OS extended (journaled) with a GUID partition map.

  OS X will only be installed on a properly formatted disk.

  HTH

  Leo

• My Wacom Graphire4 graphics tablet works only with the pen pressure, OK in CS5 but not CS6...

  I am Windows 7 Professional 64 bit and still have the CS5 and CS6 64 bits loaded.  I've used my tablet with stylus Graphire4 with CS6 will detect all problems.  All of a sudden it only works with the pen pressure even if the stylus pressure is off.  I'm trying to use it as a mouse and frequently use shift/click when you change a mask.  I can do it no longer.  If I run CS5 the pen works as it should but not CS6.  When I first open the CS6 with visible brush the brush palette shows a hard brush, but when I open a file it turns into sensitive pressure without measure by me.  I have reset the brushes, re-installed the driver and finally downloaded a driver more but the problem persists.  Because it works very well in CS5 but not CS6 it must be a problem to Adobe.  It's very frustrating.  I enclose a composite image showing what happens to the CS6.  The right side shows what looks like the brush palette until I open a file.  The left side shows what happens when I open a file.   Even if I do not open a file and make changes within the brush palette, it immediately turns to pen pressure.  It's very strange.

  I would of course someone can provide information that could help.

  Kind regards... Ralph

  

  No answers, but in the meantime, I have come into contact with Adobe.  Problem has been resolved by phone.  Resolution is to delete the preferences file reopen CS6, date at which the PS automatically creates a new preferences file.  It was she, corrected a problem... Ralph

• Script works only on the first occurrence of a masterpage

  I adopted a dynamic shape on LiveCycle to maintain and update. I have no programming experience, but are working with LiveCycle for over three months to know that I'm going every day.

  I have a problem of script that I don't know how to handle. I use javascript. I currently have a script that will look at the < State > tag to an xdp. If the value < status > is a certain State, then a text in the subform 'footer' of a master page will be hidden while another text with a larger font becomes visible.

  if (xfa.datasets.data.job.data.state.value, == , "NJ") { }

  jobs. MasterPages.Liability_Continued.footer.liabilityFooterBig.presence = 'visible ';

  jobs. MasterPages.Liability_Continued.footer.liabilityFooter.presence = "invisible";

  }

  My problem is that the script only works on the first instance of the master page. On all other occurrences, it always displays the text smaller.

  I tried the script on initialization, enter, exit, calculate, validate, validation status, presave, postsave, preprint, post-press, presubmit, postsubmit, docready, docclose, form ready, ready, available and index change the subform "footer" events, but these events have not worked at all, or only worked on the first occurrence of the subform.

  How can I get the visibility of these text objects to change all occurrences of the subform?

  Hello

  There are two possible options. We need to loop through all instances of the Master Page and change the presence of objects on each instance. The other would be to have the script in the event layout: ready for each of the objects referring to this.presence = "invisible";

  Thus, for example, if your Master Page named Page1, then this should work:

  var oMaster = xfa.resolveNodes("Page1"); 
  
  for (var i=0; i
  The exact reference in the script would be according to your hierarchy.
  Niall
  		   

• Magic Mouse works only with the latest el capitan

  Why Apple is not the problems with El Capitan (10.11.6) and it's Magic Mouse? The only way is connected to my MacBook Pro is to remove the com.app.bluetooth.plist at the end of each session and even that does not always work. When it is finally connected, the mouse connects and reconnects constantly during the session. The mouse is an Apple product, and Apple does not seem to recognize the problem or give anyone a viable solution.

  Determine that the problem is inherent in the software is an act of faith (there is no batches of messages here with the same problem).

  Try resetting the SMC and the NVRAM.

  Barry

• IMessage works only with the last update in elcappitan

  Why not send iMessages on my iMac since the upgrade to the latest version of El Capitan?

  Hey lahugus,

  I use iMessage every day and if it stopped working for me all of a sudden I wouldn't be happy.

  I would first double check the messages preferences and check iMessage is enabled and that you are connected with the correct ID of Apple.

  If that is correct, turn off the computer, and then turn it back on and test again.

  If it does not sign iMessage and then again in it.

  These steps should solve your problem.

  See you soon

• GPIB analyzer works only with the Trace of e/s on the same computer

  Following the advice on the basics of knowledge I want to capture Trace IO simultaneously with the

  Capture on the field PC Analyzer.  This is because I have to go on a customer site and only want to

  capture non-intrusive traffic GPIB.  The IO Trace does not capture the field of PC that has the GPIB +.

  card.  When I run IO path on the Test PC, it works fine.  However, I want to avoid encroaching on the

  Setting up clients to say IO Trace Facility.

  If I run a basic series write and read VI. EXE on the PC in the field and to perform only IO capture of this

  works fine (no instrument not attached - just to make sure IO Trace works on PCs in the field).  If I run the NOR

  draw on its own on the field PC, then run the Test PC controlling Instruments, IO Trace is

  does not work.

  At this point, I wonder if Analyzer and IO Trace can not run simultaneously on the same PC?

  OR Trace does not work with GPIB cards +?

  Help much appreciated.  Thank you

  Trace of e/s OR and GPIB Analyzer can be run on the same computer, but not in the way you want.

  The GPIB analyzer is actually a Logic Analyzer, which "listens" for all lines GPIB directly from hardware. For this reason, it can be run from any computer connected to your GPIB topology, even it is not involved in the transers. This allows almost completely corner the bus logging.

  Trace IO OR works with drivers OR Save function calls that are made. These function calls can only be captured the system where they are called, therefore NO IO Trace should run on the test computer. Trace IO NOR will always be a small impact on the time where the test system, due to the time it takes to connect to each call.

  -Jason Smith

• HP Touchpad browser works only with the Cisco Valet Plus router

  I bought a 16 GB HP Touchpad several months ago and had been enjoying his excellent WiFi feature with my old G from Linksys WRT54GS wireless router until I replaced it with a new Cisco Valet Plus (model M20) wireless-N Router a couple of days.

  Although I could easily and successfully, join the Touchpad to the Cisco Valet network, browser fails most of the time to load web pages.   For example, if I go to www.yahoo.com, the browser is going to slowly load the web page, or it will expire with a pop-up message error "Impossible to load the Page.   If I try to select a link from the homepage of Yahoo, it expires with the same message.  And this happens for all web pages.  If the initial page happens at all, I can then from this page a link to any other.

  I know that the issue is not with the router because I have several other devices connected to it and they are all working well, including a laptop HP ProBook, an iPad and a Wii Console, I use to watch Netflix movies on.  None of them has a problem - only the Touchpad.

  If I go into settings-> Wi - Fi, it shows that the Touchpad is connected to Cisco network.  And when I run the diagnostic system, it shows that the Wi - Fi works correctly.

  Does anyone have an idea how to solve this problem?

  I have found a workaround that did the trick.  I had to change the channel setting auto on a coded hard 1 channel wireless.

  Now, the Touchpad works very well, as well as all other devices that have worked.

• Application works only with the WAP. good with wifi

  My application works fine with wifi connection, but does not not with WAP GPRS.

  + 2 days devoted to this subject, but no success.

  Here's the code...

  Hi mantaker, yet I don't have the solution to my previous problem.

  my application using httpconnection and his fine work with Wi - Fi (the device). obtain data from the servlet. I want to use GPRS EDGE. I tried the very last day. but it's not working. even I had the name of the apn, the user name and the password. but it's not working with GPRS. Deploy the NetworkDiagnosticPublic application on device even his also does not work with WAP. and not getting not response. only works with wifi. Here is my code. n my wifi connection successfully application, but I want to do with the GPRS Edge code is

  connThread.get("http://*********.30daytrial.webappcabaret.com/Zain_Servlet/second?f1="                            + NameTextField.editField.getText()                            + "&m2="                            + AreaTextField.editField.getText()                            + "&l2="                            //+ LastTextField.editField.getText());//NOT WORKING                            //+ LastTextField.editField.getText() + ";deviceside=true;ConnectionUID=" + getWap2TransportUid());//NOT WORKING                            + LastTextField.editField.getText() + ";deviceside=true");//NOT WORKING                            //+ LastTextField.editField.getText() + ";interface=wifi");// WORKING                            //+ LastTextField.editField.getText() + ";deviceside=true;apn=internet;" +                            //"TunnelAuthUsername=internet;TunnelAuthPassword=internet");//NOT WORKING
  
     private static String getWap2TransportUid() {
  
       // Get the service book records for WAP2 transport.          ServiceRecord[] records = ServiceBook.getSB().findRecordsByCid("WPTCP");
  
            for (int i = 0; i < records.length; i++){
  
                Dialog.alert("Service: " + records[i].getName());         }
  
             for (int i = 0; i < records.length; i++)           {             ServiceRecord serviceRecord = records[i];             String cid, uid;
  
                if (serviceRecord.isValid() && !serviceRecord.isDisabled()) {                 cid = serviceRecord.getCid().toLowerCase();                   uid = serviceRecord.getUid().toLowerCase();
  
                if (cid.indexOf("wptcp") != -1 && uid.indexOf("wifi") == -1 && uid.indexOf("mms") == -1) {                    Dialog.alert("New ::  "+serviceRecord.getUid());                  return serviceRecord.getUid();                    }             }            /* String recordName = serviceRecord.toString().toUpperCase();             if (serviceRecord.isValid() && !serviceRecord.isDisabled() &&                     serviceRecord.getUid() != null && serviceRecord.getUid().length() != 0 &&                     recordName.indexOf("WAP2")!=-1)
  
                 {                 Dialog.alert("recordName: " + recordName);                     String uid = serviceRecord.getUid();                    Dialog.alert("UID="+uid.getBytes());
  
                     return uid;               }*/           }
  
            return null;  } 
  

  
  

  Yes peter, there are a lot of thread having the same issues...

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&message.ID=38541#M38541

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&message.ID=38328#M38328

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&message.ID=38316#M38316

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&thread.ID=38157&view=by_date...

  always loads UN stuck

  See you soon...

• RV220W works only with the PPTP server on one VLAN only

  Hello

  I have a RV220W (firmware 1.0.3.5) but I can't seem to work with the PPTP server on one VLAN only.

  My default VLAN is in 192.168.1.1/24.

  I created a VLAN ID 10 in 192.168.50.1/24 inter - vlan routing: disabled and device management: disabled.

  (Menu network > LAN > belonging to a VLAN and multiple VIRTUAL local network subnets).

  Then I configured a PPTP server on the IP 192.168.50.200 to 192.168.50.210 range.

  Finally, I created my user.

  (Menu VPN > IPSEC > VPN users).

  The PPTP tunnel is at work, but on all of my local network and not only the VLAN ID 10.

  Any idea? ...

  This seems to be a limitation of the firmware 1.0.3.5. Firmware 1.0.4.x will support the rules on access inter - VLAN, which I hope, can be used to restrict traffic VLAN by default your VLAN ID 10.

• Unit works only with the Boot Camp Partition

  Hi guys - I searched the forums for a while and pretty well I came across all positions said that if the unit does not have to uninstall/reinstall VMware Tools.  I tried twice but nothing helped. I am very new to the merger, but for now I'm very excited/impressed with the trial version - I just everything works fine!

  Sorry to ask 2 questions in once, but someone pourrait' one also point me in the right direction on how to remove my bootcamp partition and strictly use VMware so that I can create snapshots and free up hard drive space?

  OSX 10.5.6

  Windows XP SP2 (bootcamp partition)

  VMware Fusion 2.0.4

  MacBook 1st Gen 13 "Core Duo 2 GHz, 2 GB memory

  Thanks in advance for helping me!

  drkenan wrote:

  How to remove my bootcamp partition and strictly use VMware so that I can create snapshots and free up hard drive space?

  If you want you can import the Boot Camp partition as a Virtual Machine based on a separate stand alone file, or you can install Windows from scratch.  After you import if desired you choose and you don't want to use Boot Camp natively or as a training Camp for the virtual partition Machine (not that any) and want to recover the space that the Boot Camp partition is far from taking the Macintosh HD you can then use the Boot Camp Assistant (/ applications/utilities/Assistant Boot Camp) to remove the Boot Camp partition to reclaim that space.

  For the import of the Boot Camp partition as a Virtual Machine based on a stand-alone file, take a look at: VMware Fusion (menu bar) > help > VMware Fusion help > creating virtual machines > import Virtual Machines > import the Partition Boot Camp

  Regarding the Boot Camp existing partition Virtual Machine...

  Note: These senses are different which have already been posted so read and follow through... Note: These steps assume that you have a single Apple to default installation of Windows on a single Boot Camp partition and Boot Camp of VMware Fusion single default partition Machine virtual (without a snapshot *) and if you have changed the partition Boot Camp Virtual Machine to add additional hard disks to be virtual or RAW disk then do not use these instructions unless you backup the Boot Camp partition the Machine package virtual first. * Also note that Fusion 2.0.0 may accidentally have a snapshot with the virtual partition Boot Camp Machine and it should not have, then you should check to ensure that the condition does not exist as well. (With merger closed if the partition Boot Camp Virtual Machine package is over 1 MB in size, then you might have a snapshot in place and do not continue with these instructions.)

  ===

  1. If the merger is open, close it.

  2. in a Terminal (/ Applications/Utilities/Terminal) copy and paste command, as the following and then press Enter and it will delete the partition Boot Camp Virtual Machine of the metadata and the Virtual Machine to help.

  Note: This does not affect the Boot Camp partition install windows in that it does not remove it.  Also be sure you copy all the command line below, as well as, "RM" at the beginning of the ' (quote) after the s in the Machines. "

  RM - dfr "/Users/$ the specified item was not found./Library/Application Support/VMware Fusion/Virtual Machines.

  3. start Fusion (/ Applications/VMware Fusion) and select the Boot Camp partition on the window library of Virtual Machine, and then ctrl-click it and select Delete.

• ReminderFox works only with the latest version?

  ReminderFox stopped working with the latest version of thunderbird

  Please make sure you use a current version of Reminderfox.
  As it says in the latest version it works with 38 TB.

  https://addons.Mozilla.org/en-us/Thunderbird/addon/ReminderFox/?src=CB-DL-TopRated

• Satellite M30x-154 works only with the battery in use

  I own a Satellite M30x 154 and did so for two years. Now the laptop is more fuel with just the battery in use.
  It feeds well with the power adapter and the power indicator shows the batterys is full of 74%.

  Any ideas?

  What to say? The battery is possibly defective. The fact is that M30 x is old enough laptop model. Everything is possible.

  What happens if you start Notepad with AC adapter, then remove the connector ca? Can you use Notepad on only battery power?

• Satellite A75 - switch wireless works only with the Intel wireless network adapter

  The Atheros card that came with my Satellite A75 had questions, so I installed an Intel 2200.
  According to Device Manager, everything works and is properly installed and should work, but the message I get is the wi - fi switch.

  It is placed at the position, but the indicator light lights up and the Intel card does not connect without it. The light comes on with the Atheros, but this card hangs the system.

  A few months ago, I borrowed an Intel 2200 on an IBM and put it in the A75 temporarily and it worked fine, that's why I bought the Intel.

  I tried the FN + the button with the antenna, but no effect, even if it also works with the Atheros.
  Y at - it another way to activate the wi - fi in addition to the switch and the FN, or is there a way to disable the switch function if the computer doesn't even know it's there?

  Maybe it works.

  Thank you.

  Solved! If anyone has this problem, here is the link to fix:
  http://www.TechSpot.com/VB/all/Windows/t-18046-p-2.html