do not remain engraved on dvd files

Similar Questions

• Satellite Pro A120: DVD/CD burner does not burn audio and video files

  Hello

  I have the Satellite Pro A120 with a cd/dvd burner MAT * a uj-8415. It works very well with data Brüning, but...

  When you try to burn the MP3 files or video files on DVD or CD/r or any type of audio file, it suddenly gives me an error message telling me that the cd can no longer be used.

  I tried hole Sonic (RecordNow), through Nero 6, and also directly by dragging and dropping files, but all was in vain. This MATI * a uj-8415 machine has also made the same error while burning a DVD double layer.

  Again, the unit reads all types of CD and DVD and writes also all types of files with the exception of the audio and video.

  Can you help me please to solve this problem?

  Hello

  I know that some mp3 files and audio are protected against copying and burning on different CDs or DVDs so could not work? ¦

  Other reasons why you can't write these files to CD or DVD is simply a problem of compatibility between the STRANGE and the CD or DVD.
  According to my experience, not all CD or DVD is supported, and these compatibility issues are not really rare.

  I also have another idea.
  Have you heard of burning of problems caused by the bad registry entry? I mean the upper and lower filters...

  Please check this doc MS:
  http://support.Microsoft.com/kb/270008/en-us

  Completely remove the Upperfilters and Lowerfilters from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  .. .and see if it helps.

• When I try to burn a DVD with Windows DVD Maker, he says that the file is not a valid project create DVD file. Why?

  When I try to click on add items in Windows DVD Maker, it will allow me to select a file, then it tells me that the file is not a valid project create DVD file. Why?

  What is the format (extension) of the files of the selection?

  Windows 7 - burn a video DVD with Windows DVD Maker disc
  http://Windows.Microsoft.com/en-us/Windows7/burn-a-DVD-video-disc-with-Windows-DVD-Maker

• Windows Media Center won't add DVD files to its library which do not affect the disk C on Vista

  Hi people,

  I had Media Center works well with more than 104 GB of movies in the library.

  I ran out of disk space and a 1.5 TB drive was added to the system.

  Once this new space has been initialized, I moved all film to him records and updated the path in Media Center to 'Look' that new folder.

  Media Center can no longer see or read these films.

  I deleted all the files associated with the WMP 11 app (APPDATA\Local\Microsoft\Media player to rebuild the DB but no difference.

  Does anyone know how to activate the Library Media Center pull in DVD files outside the C drive?

  Thank you
  Derek

  Holy Cow,

  I just found the answer in an article at www.paraesthesia.com/archive/2008/09/12/how-to-set-up-a-dvd-library-in-windows-media.aspx

  The library 'Add folder' does not work in the Menu 'Settings' of Media Center.

  On the other hand, it works via a right click on the window of DVD library.

  IE: when you're in the Livrary DVD, right-click and choose Add movies.

  This is a bug not documented in Media Center!

  I finally got this animal working woooo hooo

  :)

• Satellite M40 - Teac DV-W28E does not burn CD or DVD

  G ' Day,.

  I had problems with my dvd writer no longer works correctly when you try to burn cd or dvd. It is a Teac DV-W28E model and I would love to be able to get the drivers for it to reinstall, but I can't find them and when I try to do a web update he asks the CD. Looking at the Teac site there are no drivers for this particular dvd burner it. Looking at the Microsoft Web site for support... much less said about it the better.

  I don't know if I uninstall the driver for my dvd, and then try to reinstall I'll be even able to do it on the net for the above reason to ask the installation cd.

  Now I don't know if it's related, but I followed the Toshiba update for my BIOS earlier and as I had not even tried to burn anything for a while, I do not know if she had any questions before or after.

  Generally, it is not recognizing the dvd as an engraver of dvd burner. If I drag and drop files to burn in Solution Explorer, then they do not appear to burn to a cd or dvd. When you try to use Nero v6.0.0, then it will crash at the end trying to write the last part of the file on the disk.

  Anyone know how to help me save the environment by creating no more silver coasters / wind chimes / etc etc? Any ideas at all? I might just have to give up the cow and get a generic replacement as I began to need to burn for the backups to work and reports.

  TIA,

  Keiran

  The CD/DVD drive uses no special driver.
  It uses the drivers simply Microsoft Windows and the drive should be recognized automatically after removing.

  If you have any problems with the writing on the CD/DVD, then I suppose it could be a hardware problem such as calibration target or something like that.

  But first you have to check the different options that might be responsible for the failure of the burner
  In the disc properties (right click-> properties), you can find the recording tab.
  Here, you must enable the option activate the writing of CD on this drive if you use the drag and drop to burn files.

  I also recommend using only burning on the operating system software.
  Nero is a friendly software. I use it too

• Satego X 200 - 21 d: drive DVD TS-L632D is not read and burn DVD-R DL

  Hallo,

  I have problems with my DVD SATEGO X 200 - 21 d
  TS-L632D read a burn only DVD-R DL discs.
  I contacted Toshiba support via e-mail and asked
  for a new disk firmware, but the answer did not solve my problem.

  There are only updates in the download area of toshiba,
  but not for my car model. I can send my laptop
  for the money to a service partner, to check this problem.

  I do not understand this! I bought a laptop upscale
  for 1,700 EUROS and there is no support for the update of the firmware
  available to solve problems with newer drives?

  If I get this problem in the WEB, there is an a large number of
  questions and problems with playback and engraving
  Discs DVD-R DL with this drive model!
  How is it possible?

  I hope for some advice to get an update of the firmware player
  to solve the problems of reading and writing DVD - R DL discs.

  Janni J. Gettings of Germany

  Hello

  I found the update of the firmware on the European driver Toshiba page!

  Satego X 200 - 21 d seems to belong to the PSPBEE and the Toshiba page provides the update of the firmware to TO02.
  It s for the TS-L632 reader.

  But generally not all CD or DVD of all manufacturers is fully supported.

  My knowledge of the user manual should provide a details and info on compatible and tested media.
  Using recommended media, you can be sure they will be compatible and will work 100%.

  Greetings

• Photosmart e-All-in-One Printe: Photosmart e-all-in-one - D110a does not print text or Doc file

  Until that number today printing problems.

  Now can't print from Word or any text file.

  All other OK.

  Uninstalled and reinstalled SW.

  Problem remains.

  Word files and text printed in WHITE.

  All others are OK.

  Hey @Clark_Stillman,

  I understand that when you print from your Windows 8.1 computer to your HP Photosmart e-all-in-one printer D110a print jobs are coming in white. I would like to help you today with this printing problem. When you print from your computer, some files are sent to your printer as "image" files If your printer 'think' it prints an image, color ink may be used to enrich or to 'do' the dark. This can be misleading because your machine can really be confronted a black ink, problem of print, but you may think that your machine works great as always black appears in print. While in reality, it's just the ink to mix color to black. Therefore, at the beginning troubleshooting I'll have print you a standalone report diagnosis on the quality of your printer. This report will help us determine if this printing of the blank page problem is caused by your printers ink system or your computer. Can I please you follow the steps below.

  How to print a report of quality diagnostic:

  1. Load plain white paper in the input tray.
  2. Tap the button of the ATM () next to the icon of configuration () in the lower left corner of the control panel.
  3. Press arrow right () and select Tools, and then tap OK.
  4. Press arrow right () to select Print Quality Report, then tap OK. The printer prints the report.

  

  • If this report prints perfectly: Only the blank page printing problem isn't be caused by your printer. On the contrary, there may be a driver or a conflicts between your computer and your HP Photosmart camera setting. Can I have it please click here to download and run the HP print and scan of the doctor tool. Once the tool downloads, please run the tool to the "difficulty of printing." If connection, software or driver conflicts turns out that the HP print and scan of the doctor tool will attempt to resolve these conflicts for you. Once the tool has completed please test printing from your computer.
  • If this report does not print correctly:  That the problem you are experiencing is caused by the printing of your printer system. To solve this problem of print quality can I please have you click here to access the appropriate troubleshooting steps. Once the support document opens please run through the Solution, one five, six Solution and seven. This includes all sub-steps under the listed Solutions. Once completed the print quality troubleshooting steps, please try to print to see if the problem is now resolved.

  Please reply to this message with the result of your troubleshooting. You can also click thethumbs up' ' icon below to say "thanks for the help!" I look forward to hear from you!

• The volume control will not remain on the taskbar, XP

  The volume control will not remain on the taskbar, I open the control panel and sound to restore everytime I restart the computer. How to restore the registry file which told him to stay?

  Thank you, Larry.

  I found the Microsoft FixIt program and ran that she and that solved the same problem you described.

  Thank you very much!!!

  Ross

• When I go to my computer, then program files it will not show me the exe files

  When I go to my computer, then program files, that he will not show me the exe files, that told me what to do not have full administrator control, when I go to the page showing which is the administatrator he show me has a control total why he let me not see the exe files, it also leaves me not so far closed for my dvd writer dishes?

  Try Control Panel, user accounts, click the account, make sure that its listed as 'administrator '.

  close. Then, in control - panel.open 'Options records' stand & check the box 'Show hidden '.

  files & folders", uncheck uncheck them next box"Hide extensions"next"Hide protected. "

  files/folders", nearby... This you gives access, however, once youre thru with youre editing

  or see the files/folders, you must restore default in 'Folder Options '...

• Film on dvd Creator project. Plays fine in media player. Will not play in the dvd player.

  The project with photos and music. None of the effects or transitions. Project play 100% in movie maker after completion. Said created sucessful and raises questions to save on another cd. Plays correctly in computer with media player, but does not play in any dvd player.

  The project with photos and music. None of the effects or transitions. Project play 100% in movie maker after completion. Said created sucessful and raises questions to save on another cd. Plays correctly in computer with media player, but does not play in any dvd player.

  ========================================
  You have posted in a forum of WinXP, so I think that you are running
  WinXP?

  The project must be saved in a folder on your hard drive
  in the WMV or DV - AVI movie format and then on DVD
  using DVD Authoring software.

  To save in a .wmv movie file...
  Type of... CTRL + P (or go to...) File / save movie file)
  to open the wizard movie recording.
  Choose... My computer.
  Next /.
  Enter a name and a location.
  Next /.
  ICT... "Best quality for my computer.
  Next /.
  Wait while the movie is saved.
  Finishing...

  To save a DV - AVI movie file...
  (and other options)
  Type of... CTRL + P (or go to...) File / save movie file)
  to open the wizard movie recording.
  Choose... My computer.
  Next /.
  Enter a name and a location.
  Next /.
  Show more choices.
  Other parameters.
  Open the window of the droplet and choose... DV - AVI.
  Next /.
  Wait while the movie is saved.
  Finishing...

  In addition, you may find it useful to use
  a custom profile:

  Movie Maker 2 - economy
  Movies - profiles custom WMV
  http://www.Papajohn.org/mm2-SavingMovies-CustomProfiles.html

  Creating custom profiles
  for Windows Movie Maker 2
  http://www.Microsoft.com/windowsxp/using/MovieMaker/expert/CustomProfile.mspx

  Now to create the DVD...

  The following freeware can be worth a try:

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://www.dvdflick.NET/Download.php
  (the download is: "dvdflick_setup_1.3.0.7.exe")

  Save the file to a folder on your hard drive and
  install from there.

  Be sure to read the Guide:
  http://www.dvdflick.NET/Guide.php

  Tutorials:

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  To create a video DVD base that should play in a free
  permanent drive DVD... try the following...

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a blank DVD in your drive.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  Advanced Cyberlink, Nero, Roxio, software
  Ulead, etc... but at least it is a start.

  Good luck.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Windows vista Manager or the device does not recognize the cd/dvd drive

  I have windows vista and it is not recognize my cd/dvd drive. When I click on my local drive (c :)) and recovery hp (d) shows up, I checked my device manager and nothing shows here either for my cd/dvd drive, so I checked the cable but it looks fine.) checked the files of the upper and lower register, but that fact so I just bought a dvd burner external made by polaroid that is USB2.0 and supposed to be plug-and-play, but when I connect it nothing happens nothing. the power turns on two cd players and the disc starts to spin but it stops after 15 seconds and I get nothing. I am confused and don't know what to try. Please help thanks. so I tried to use the running microsoft dvd set and the message I said 'dvd cd drive not detected '.

  I tried these steps with no luck

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Hello mike salinas.

  1. you have any third-party burning software installed on your computer?

  2. have you checked if the external CD drive works on another computer?

  I suggest that you check if your internal CD-ROM drive is detected in the BIOS.

  Usually, you must press a key (for example, F2, F12, DEL, ESC) or a key combination whenever you turn on your computer, but before I get to the BIOS to start Windows. Check to see if there is the CD/DVD drive in the BIOS.

  You can see the article for more information about the BIOS:

  http://Windows.Microsoft.com/en-us/Windows-Vista/BIOS-frequently-asked-questions

  Regarding the external CD/DVD drive, I suggest you see if it works on another computer.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• What program opens the .dvd file created on a Windows XP computer?

  I tried to open the video that have a .dvd file extension. I tried several trial programs, but none does not recognize the extension. The videos were created on my old computer using Windows XP, but many programs I moved were lost when the hard drive is gone on my new Vista machine. I do not have Vista Ultimate so I can't use the previous versions feature and I tried so many programs to open these films that the Properties tab shows that this last program that the file 'opens with '. I guess I need to know what program created the.dvd files and what I can do to save them. I don't have the original avi or mpeg files any longer. Thanks in advance,

  You're welcome... and thanks for the comments.

  Congratulations for the recovery of your files.

• Backup files Vista - "Windows could not find any backup sets [file path]."

  I have a Vista computer.  The hard drive broke so until I replaced it I backed up all the files on the computer to another computer running Windows 7. I did it in the backup and Restore Center.  I made a backup of files, not a full backup of the system (I've seen the full backup of the system mentioned in other posts, but that was not an option... maybe which is only available on Vista Premium).  In any case, I replaced the hard drive and then try to restore the files, but I get the message "Windows could not find any backup sets [file path]."  Anyone have any ideas?  Thank you.

  Here is an article on the restore procedure:http://www.vista4beginners.com/How-to-restore-files to make sure you do this right.  It's a selective restore of a full or selective backup (not a full restore from a full backup) - but since you did a full backup, it matches your process more closely than would a full restore.

  Here is an article on the advanced use of restoration (during normal restore does not work):http://www.mayankraichura.com/post/2009/08/06/Avdvanced-Restore-via-Windows-Vista-Backup-and-Restore-Center.aspx.

  Restore files from a backup
  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-files-from-a-backup

  Back up and restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  I also found the following (but don't know if it of true or not):

  1. after the start of "backup and Restore Center."

  2. I chose "Advanced Restore"

  3. I was did not an administrator password... maybe because my account is an administrator account.

  4 choose "files from a backup made on a different computer.

  5. in the dialog box indicating "Select the location of the backup to restore", select "hard drive, CD or DVD...". »

  6. under the drop-down list box, select your drive/partition and continue

  7. If all the backups on your drive, it will show a list of them.

  8. in my case, he showed a backup, but in the backup location, it will show "backup location is not available."

  9. I was frustrated, but then I somehow just select this backup (Yes... even if he said that thebackup location is not available " ")

  10. and you press "next".

  11 guess what... no error!

  12. a window appeared asking me if I wanted to do a full restore, or I want to select specific folders or files.

  13. I selected the folders I wanted to restore and bingo... it their restored smoothly.

  14. so that the next time see a mistake, try to continue with him... ;)

  I don't know if this will help, but it does not provide much information about the process (when it works).  I hope you find any error or discrepancy in your procedure and it will clear up and allow you to restore.

  I hope this helps.

  Good luck!
  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• disc CD - r will not play using a DVD player

  When I create a movie with movie maker cd - r disc will not play on a dvd player. It comes up with 'unknown disc '. Where I'm going wrong?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Unknown disk error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  It is always better if you include your question in the body of your message.

  Unless you had a special software that would create a video CD (VCD) your
  free-standing DVD player won't play (and even then... your DVD
  Player must be compatible with VCD, and some are not)

  Try to use a cache of DVD with Windows DVD Maker. The following links may
  be worth a visit:

  Windows Vista - Windows DVD Maker - burn video disc
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-DVD-video-disc

  "Import files into Windows Movie Maker"
  "Publish and burn a movie to a DVD.
  http://m-Lov.blogspot.com/2007/11/you-can-use-Windows-Movie-Maker-to.html

  Windows Vista - Windows DVD Maker
  http://www.windowsvistauserguide.com/windows_dvd_maker.htm

  Windows Vista - DVD - video burning - frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/DVD-Video-burning-frequently-asked-questions

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Windows 7 Professional 32 bit and Media player 12 play DVD files on the hard disk of the PC.

  I want to be able to read dvd files (vob files) with media player 12 by selecting the folder and then just click on play like no other product like power dvd or nero showtime, but I don't understand how to do this with wmp12.  Also why can I not add the vob files to the media library with wmp12?  Vob files appear in the Windows libraries outside wmp12, but when I add a folder to your video library in wmp12 they never appear in areas of the screen to play.  Wmp12 not allow vob files to add to the library or what?  I intend streaming files my blu - ray player from my network home using dlna.  All the other files except the vob files will flow from wmp12.  Whats up with that?

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forums.

  There is a list of the Windows 7 Forums at the link above to help you.

  You get the help you need there.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner