Had to remove my battery to start my Satellite A200

Similar Questions

• Do not start by Satellite A200-1AB

  I bought this laptop about 6 months ago.
  I don't use it that much, came to use yesterday, would not start.
  Thought the battery must be dead. Plugged the AC, nothing. No ac light.

  I took the cable ca to my store of the local computer.
  He did a test on this issue and he said that's fine.

  Anyone has any ideas what this could be?
  Thanks for any help.

  Try to remove the battery from the laptop and unplug the AC for about 20 min.
  Then, connect the new and try turning on the laptop.

  If this does not help to remove the battery and connect only the AC to laptop and try to start the laptop.
  That's all you can do.
  If this is not always useful, so there no other way to contact the technicians in your country.

  The authorized service partner must check the laptop.
  Because the laptop is about 6 months, the guarantee is valid and everything should be done for free.

  Good luck

  Good bye

• Tuning Service locked when I start the Satellite A200-1The

  Computer laptop Performance Tuning Service locked when start Satellite A200-1The

  Help files for understanding...
  Version.txt
  minidump.mdmp

  Anyone can halp me please?

  Hello

  Sorry but I don't understand what you want. Can you please describe your problem without sending this help file.

• Satellite A200 - replacement battery and system now say "none detected battery.

  I put a new battery in my Toshiba Satellite A200 and now it's show no battery detected and no led showing battery recharges.
  Can anyone help please?

  Hello

  For me, it looks like you used not compatible, not taken in charge or bad battery.
  But you can try to remove the battery and he must walk in order to check if there is some loose contacts or something like that

  If this isn't the case then get in touch with a local ASP from Toshiba and order the battery that is recommended by Toshiba.

  Welcome them

• Satellite C660D - 10 d will not start unless I have remove the battery and reinsert

  Present a strange problem that I can't solve.

  Brand new, open all laptop worked perfectly.

  Turned off normally and left it overnight with the power supply connected.

  Next day morning pushed the button market / stop the portable green power on but light did not start.

  Press and hold the button for 10 seconds does nothing.

  I remove the battery for 10 seconds and put again and then you press the power button and you get a full boot up normally.

  Everything on it works perfectly, you can restart the laptop without problem, you can even turn off then turn on half an hour later with no problems.

  This problem occurs only when it is off and that the power is plugged in for several hours.

  Back to toshiba warranty, I've attached a note explaining the problem and even returned what he locked up so he wouldn't turn until they removed the battery.

  10 days later they returned it saying that the intensively checked the laptop and found no abnormalities.

  I plugged the battery and pressed the power button / stop and the same question once again outside of this period, that the fan runs for 2 seconds then turns off, I removed and re inserted the battery about 15 times before it started normally.

  Last night went out as normal and this morning the question of the standard of don't turn is not on at all.

  Just to clarify him when the power supply is left connected overnight or for several hours so that the system is power off the laptop does not start, the Green led lights, no fans spin, no sign of life. One way to start is to remove the battery for 10 seconds.

  I've been on toshiba again and said that if I return it a second time and they can't find a fault that I would have to pay £80 for it returned. I recorded the fault to prove that they is a fault but they seem not interested in that.

  Up to now, the bios has been updated, reinstalled windows, I can't replace drive HARD or RAM that the warranty will be voided. However issue and im 90% that this is a motherboard.

  All the ideas that I'm completely stuck on this one!

  Sorry to hear you I have a problem with your laptop.
  Problem you have is certainly hardware related issue and it should be solved by Toshiba.
  In my opinion you should not spend money for new parts, trying to solve this problem.

  Laptop warranty valid and should be set the laptop for free.

• Dell Latitude E6400 does not start pressing the power instead button, I have to remove the battery.

  Original title: problem starting Latitude E6400 lappie

  Hi all

  When I start my dell latitude6400 is not start pressing the power instead button I have to remove the battery to the rear and place it again, and then the lappie starts... someone can help to...
  Thank you

  Hello

  1. what happens when you start the laptop, you receive no error message?

  2 have you made any changes to the computer before the show?

  I suggest to remove the battery and connect the laptop to AC power and then try to start the computer to see if the problem is with the battery.

  I suggest you to contact Dell support on the issue, as this can be a hardware problem.

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_us?c=us&l=en&s=DHS&CS=19

• Why the CPU frequency will be just said to 1189 MHz when the X 230 had AC power ONLY (battery removed)?

  Dear all,

  I bought a X 230 (i7) laptop.  I found that has removed the battery from the laptop and use only the power supply with the X 230 Notenook.  The CPU frequency will said to 1189 MHz.  It will not change no matter how the laptop program is running.  The CPU frequency will increase to 2.9 GHz or up to Turbo when the laptop with battery or battery and AC power.  Why the CPU frequency will be just said to 1189 MHz when the X 230 had AC power ONLY (battery removed)?  This is not good.  No matter which setting in X 230 Notebook need to change?  Help, please.

  Welcome to the forum!

  What you feel is the factory default setting. You may or may not be able to get around using an adapter 90 w instead of a 65W one, but I've generally not recommended to use the ThinkPads without a pile of work.

• THE MOUSE HANGS AFTER COLD START. YOU WILL NEED TO REMOVE THE BATTERY TO RESET. THEN CLICK OK

  ON A COLD, AFTER A MINUTE OR TWO, START THE MOUSE FREEZES.  I HAVE TO REMOVE THE BATTERY AND REINSERT IT AND RE-BOOTING, EVERYTHING ALREADY WORKS FINE.  AN ANOTHER COLD, SAME SEQUENCE START MUST BE FOLLOWED.  THIS ALL STARTED AFTER INSTALLATION of WIN 7 hp

  Hello

  What is the brand and model of the mouse?

  I suggest you to update the drivers for the mouse on the computer and check if it helps.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• Satellite A55-S1065 - after removing the battery, BIOS ask me password

  So, something happened yesterday, and it seems to me that it is very strange.
  I have a portable Satellite A55-S1065. And while I was with power point, the
  computer crashes. In the midst of my confusion, I decided to delete
  the battery just to make him stop.

  So I did it and plugged it again
  and I tried to turn on the computer. Now, the bios ask me a password,
  but I've no idea what password it is that. Can someone help me solve this problem?
  IM really desperate to find a solution to this since this computer contain
  many of my works.

  Thank you very much.

  > After removing the battery, BIOS ask me password
  I know it may seem silly now, but I never heard of something like that. I use laptop for a long time and I had the experience with many others and strange question, but something like that, never.

  Problem is that we are dealing here in the public forum and BIOS password is a very sensitive area and very important security feature, so we can not write here about some illegal ways how you can remove the BIOS password.

  If there is no way to start your laptop, I recommend you contact the nearest Toshiba service provider and ask for help.
  I'm sorry. :(

• I can't open the system when he was sht down. But the system was the heat and I have to remove the battery for a while and it should re-sttart, what the problem.

  I can't open the system when he was sht down. But the system was the heat and I have to remove the battery for a while and it should re-sttart, what the problem.

  Too generic a question, can you clarify considerably more for us? Your question could be reformulated in the following way and always be true?

  "I can't start my computer once he has had a BSOD. Something overheated, but I don't know. I removed the CMOS battery and replaced in order to asure me that a bad overclock on a core component has not caused the problem. Now, it restarts correctly, what is / was the problem? »
  The foregoing, what I thought you meant. The above statement is correct?

• HP pro book: 4530 Hp light up not with the inserted battery it lights up when I remove the battery

  Hello

  This morning I tried to switch on my hp probook 4530 s and there is no start, then I pluggged in adapter and still it does not illuminate the LED flashes for some time for 8 seconds and stop, when I turn it on again it does the same thing repeatedly. I removed the battery several times and connects ac, but nothing happened. And now all of a sudden turn on with power supply and no battery plugged in it. Can help me please John this question.

  Clint1

  Hello

  Welcome to the HP Support forum.

  This really looks like a hardware problem. Finally, he could end up by for a service. However, for diagnostics it is very important the number of times the LED flashes / issues.

  Please, check these items official 2 HP on these issues, that you experience now. Follow the appropriate steps that correspond to your case to try to resolve the problem:

  > > http://support.hp.com/us-en/document/c01732674

  > > http://support.hp.com/us-en/document/c03515402

  If you've tried everything but nothing works, I fear that you will need to bring your computer (or ship it) service - repair center authorized HP. If the computer is still under warranty, you must first notify HP support. If you don't know where such a Center, please contact HP support for help to find a. Here's more information:

  > > http://support.hp.com/us-en/document/c00372730

  > > http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html

  I would like to know how this happens. Feel free to post again.

• NB100: Remove the battery while plugged in that?

  I own a Toshiba NB100 and said that when I use the power cord, I have to remove the battery, after leaving the battery that connected while on hold Cela would damage the battery. Is this correct? Must I remove the battery when the netbook is plugged?

  Hey Buddy

  I started an article on the battery and some advice for her:
  [How to get the most out of the battery | http://aps2.toshiba-tro.de/kb0/HTD9401AZ0001R01.htm]

  Good reading! :)

• Cannot start my Satellite A100 - 1 G - the battery light just flashes

  I have a laptop A100 - 1 G. Indicator of battery showed low and I plugged the power supply for the laptop and he showed the connection was made, later she flashed low battery connect to the power (although it was still connected) and then he would flash his load and then back to low battery, until it ends by died.
  Now it shows even not any light when I plug in the power adapter and start not upward, the battery light blinks just and nothing else.

  Help would be appreciated!

  I think the problem is the battery. Remove the battery from the laptop, connect only leave, adapter / it connected ten minutes and try to restart your laptop.

  Please let us know what happens when you do this.

• My NEX - L 6 freezes after I turn it on, then press the film. Need to remove the battery.

  I have the NEX-6 with a 16-50 lens and it freezes when I turn it on then press the movie button. If I wait longer before pressing the button, it seems to be OK, but if not, the goal remains unretracted and start and stop again does not help. I have to remove the battery and restart the device. It took me a while to understand why it was freezing upwards, and there is at least one situation where I seen it happen on a regular basis. Does anyone else have this problem? I hope an update of the firmware wouldn't be now, but have not seen.

  No when I turn it on, it gets stuck, like a windows pc stuck with the sandclock or the circle around truning

  Its either a bug software or a problem with the 18-200mm lens, it doen ot havppen with the 16-50mm lens.

  Also, sometimes he will, but refuses to focus, as the engine focum does not report you to turn.

• Then I remove the battery

  I have a HP 355 g2 I have running on the network. Then I remove the battery?

  Hello

  It is fine to remove the battery and run the notebook only on the sector.

  If you do not want to do (and you have a reliable power supply ) drain the battery at 40% charge, then remove it and store it in a cool place.

  Then, once a month, reinsert the battery, turn the machine on and let the battery fully charge.  Unplug the AC adapter and let the unit run until you start getting a "low battery" warning  Completely load it again, then let the battery drain to about 40%.  Shut down the laptop, remove the battery and store it separately in a cool place.  Repeat this procedure each month will help you keep your battery in good condition.

  Kind regards

  DP - K