Do not use the WebLogic jms connection credentials

Similar Questions

• I'm unable to connect to the internet and I also can not use the WinXP system restore.

  No internet connection and I also can not use the WinXP system restore because it gives me an error at the 'end' which said: it cannot be restored to an earlier date.  I run AntiMalware bytes and StopZilla and erased all that they found.  Now I can't even connect to the internet.  When I go to the command prompt, it gives me an error contact the Support of MS that I know means I have a virus or a trojan that I should just get a time out?  My other PC on the same network is fine and connected.  The NETWORK card is fine, just does not know how to get rid of what it is, I have and to top it all impossible to connect to the internet to try all of the tools that can help.  Someone at - it ideas?

  The error you get at the end of the restoration of the system is typical of some anti-virus programs (Norton, especially) that interfere with the restoration of the system.  Try to start your computer in Mode safe (on several occasions, key to tap F8 while your computer starts) and run safe mode system restore.

  Additional information is necessary to treat your network problem.  Try to bring up a command prompt (start-> Run-> "cmd") or if it does not, try (start-> Run-> "command.com") and enter the command:
  ipconfig/all
  and after the info that appears in the State resulting.

  Also, check the logs of your system related errors (start-> Run-> "eventvwr.msc") and click on 'System' in the left column.

  HTH,
  JW

• How we would use the apps with connecting them to creative cloud and it is not not a trial.

  How we would use the apps with connecting them to creative cloud and it is not not a trial.

  Log, activation, or connection errors. CS5.5 and later, Acrobat DC

  Mylenium

• Why the first Firefox page tell me that I do not use the latest version when the "about" in the menu help says I?

  I updated Firefox 2 days after seeing the message that I was not using the latest version. Download and install led and everything seems to work normally except that I still have a message on my Firefox home page telling me that I'm not using the latest version. If, on the other hand, I navigate to 'Firefox' - 'help' - "On Firefox" I tells me that I'm running Firefox 8.0.1 and "Firefox is updated.

  You can see this message under the Google search box on www.google.com/firefox which is the old default Firefox homepage. It seems that this page is no longer maintained. You seem to have Firefox installed with the latest version 8.0.1.

  If you want to than the Google search page as homepage, change your homepage to Subject: House (a new update version is now integrated into Firefox).

  • See-> http://support.mozilla.com/en-US/kb/How+to+set+the+home+page

  Also see-> https://support.mozilla.com/en-US/kb/Finding+your+Firefox+version
  
  You can also see your version on the help > troubleshooting information display

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check-> http://www.mozilla.org/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin

  * Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox

  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next-generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• Can I use the SATA port connected to an optical drive to plug in a hard drive?

  I have a Pavilion e9270t desktop, Win7 Pro SP1, and I want to connect 3 HARD drive to the motherboard. Can I do this? Can I use the SATA port connected to an optical drive to plug in a hard drive?

  Thanks, CHemming

  CHemming,

  I've not seen UEIF support in the existing BIOS.

  If your demand on a 3T led, re - consider a maximum of 2 T.

  If you ask to have 3 hard disks, then you can do it without harassing the present cable of CD.

  The cage of your system hard disk will support 3 hard disks. Manual upgrade service

  All you need are the SATA data and power cables. Your Board has 4 SATA data ports.

  When you report back after inspecting your system for SATA power cables, I will move the cables and adapters, if necessary.

• Error "you do not use the Type of appropriate phone cord.

  Having a problem with my fax on my HP Officejet Pro 8500 wireless.  Tried to send a fax, it received a transmission error.  I run fax test and she came back with "you do not use the type of appropriate phone cord.  Nothing has changed since I last fax would be but I check the lines and connections, everything seems ok.  Phone jack is connected to 1 line and Officejet 2 - ext"is connected to the phone.  I use a dedicated phone # and the Officejet is set to auto answer.   I can call and receive calls on the phone to connect to the Officejet.  My hypothesis is that because I can use the phone without problem there nothing wrong with the phone line.  Any ideas?

  I had the same problem.  I am using a phone cord 2-wire supplied with the printer and still get this error.  It turns out that it is bound to have a telephone connected to the printer.  If I unplug the telephone shape of the intake extension on the back of the printer, then the fax test passes.   I used even a cord 2-wire on the telephone, but it seems that the mere fact of having a phone plugged into the outlet of expansion will cause this error.

  Run the test without a phone plugged into the outlet of extension of the printer and you should be fine.

  Worked for me!

• I deployed a private teredo server, I'm not using the public prefix 2001: 0 / 32, instead, I use the prefix 2001:2222 / 32

  Original title: windows 7 Teredo: how to configure the teredo prefix

  Hello

  I deployed a private teredo server, I'm not using the public prefix 2001: 0 / 32, instead, I use the prefix 2001:2222 / 32
  But I got win7 can't connect to my server if I use the prefix 2001:2222 / 32.
  A test, I put the prefix 2001: 0 / 32, win7 it can connect.
  How can I do so that win7 customer teredo can connect to my private server that use the prefix 2001:2222 / 32?

  Hi,

  The question you posted would be better suited in the TechNet Forums.

  I would recommend posting your query in the link below.

  Windows Server forums:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  I hope that the information above helps you.

• I have a network drive. & Passwords, I want to force their users to log in there every time and do not use the last name of user and password.

  I have a network (an Iomega iconnect nas) drive. I want to force their users to log in there every time and do not use the last name of user and password. They can change it in control of card-how can I make sure they. I'm only using Windows 7 as standalones (with lan), there is no server connection

  Hello

  I suggest you post the same question in the TechNet forum and check if it helps.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

• the installation program could not use the existing partition because it does not contain the required free space

  before I have install android 5.0 lollipop on mylaptop but I can't use wifi to connect then I use return windows 8.1 and I decided to install windows 8 because I have experience an error I couldn't manage on windows 8.1 .when I try to install windows 8 it shows me this error Setup could not use the existing partition because it does not contain the required free space... I google search for the solution but could not find so I install the windows partition 8 on my system reserved.

  Hi Lawren,

  Thank you for your update on the issue.

  In this case, you may need to format the entire disk, clean the partitions and reinstall new windows as suggested before. However, I suggest you to contact local support for the backup of your data from hard disk partitions.

  Please post back your results for assistance.

• Stop using the password to connect

  I have 2 users on my PC and I use both, and each time when I pass between them I have to use my log in password for the account, how can I ignore that, just to change user without any password, nothing. As for windows XP

  You can remove your account password in the application of PC settings (just use white or no password for your "new password).

  However, this is possible if you don't connect to your computer using your Microsoft online Account.  If necessary, you can unlink your account (convert it to a local account) of the same laptop settings application.  Remember that a local account cannot take advantage of sync setting of PC to PC and some other features.  If you don't have one PC that might not much of importance for you, and much course you can always configure your email, skydrive and anything individually in soft drinks.

  And I would be remiss in my duties if I does not point to a security review.  Your PC may never leave your House normally, but what happens if someone were to steal?  If you ever visited the website of your bank or other confidential site / provide and use the 'Remember my password', the thief can get into your bank account.  And even if you do not use the "remember my password" feature, they could always use the link password forgotten on the website of your Bank and then send you a new password. Since they have your PC, they get that email and be in all your stuff.  Just a strong argument to always use a password.  But of course, you don't have to.

• Hello. I bought Lightroom, paid license 1 year view, did not have serial. E number and then past the 30 day trial and may not use the product or work more hard. I paid has been deducted from my credit card. How I'm going to work now?

  Hello. I bought Lightroom, paid license 1 year view, did not have serial. And number and then past the 30 day trial and may not use the product or work more hard. I paid has been deducted from my credit card. How I'm going to work now?

  Hi Sergior96769872,

  I saw your Adobe ID (email address), you used to post on the forums, and I see an active subscription on it.

  Please see Help below links: { make sure you use the same Adobe ID (email address) that you used to purchase the subscription }

  Connect and disconnect activate Cloud Creative applications

  Adobe Creative Cloud apps back in test mode after 2015 set CC to update

  * NOTE: Make sure that your firewall of your computer or security software firewall does not block Adobe, if you are not sure of it can just disable the firewall for a while and then log off and log on creative application of cloud and check.

  If it still gives you an error of the trial, then please refer to the troubleshooting listed below:

  If you are using MAC:

  1-force Quit the sub process in the same sequence as shown below from Activity Monitor: see, use the monitor activity on your Mac - Apple Support

  • Creative cloud
  • Basic timing & sync to basic support
  • CC library & process CCX
  • Adobe Common Desktop
  • Adobe update daemon
  • Broker CIB Adobe
  • After that, everything that said adobe on it do a force quit for her

  2 - right click on the Finder icon, then select the "Go - To" folder. You will get a text box, type in the following command and then press the 'return '. ("Not to be missed ~ symbol")

  ~/Library (it will open the folder of the user's library.)

  3. browse to the Application Support > Adobe > trash OOBE folder and folder AAM Updater

  4 - CUT any installed security software with firewall system.

  5 - go to: Apple icon > system preferences > Security & Privacy > General > "allow applications downloaded on" change this anywhere (to make these changes click the padlock in the corner at the bottom left of this window and enter your computer password)

  These changes are temporary you can restore these changes back to normal once your creative cloud app is running *.

  6 - restart the cloud creative app and connect

  
  

  If you use the WINDOW:

  1 complete the process / Task Manager tasks in the same order, as mentioned below the Manager tasks. See, Open the Task Manager

  • Creative cloud
  • Basic timing & sync to basic support
  • CC library & process CCX
  • Adobe Common Desktop
  • Adobe update daemon
  • Broker CIB Adobe
  • After that, everything that said adobe on it do a force quit for her

  2 - C:\Users\\AppData\Local\Adobe\ MAA UPDATER and two OOBE (App data & Program Data is hidden folder please see, Show files and folders hidden in Windows 7, 8.x, 10, or Vista)

  3 - CUT any security software installed with firewall system, also if your having any browser Add On installed for blocking advertising that turn off too.

  These changes are temporary you can restore these changes back to normal once your creative cloud app is running *.

  4 - raise the cloud creative app and connect

  Let us know if that helps.

• ADF is required to use the tools to connect to the base?

  ADF is required to use the tools to connect to the JDeveloper database? I am working on a project and we cannot use the ADF for this particular application.

  When you drag-and-drop database connections, don't JDeveloper automatically insert the code of the ADF in your project to execute these database connections?
  Database objects, not database connections can be added. Please see
  http://download.Oracle.com/docs/CD/E18941_01/tutorials/jdtut_11r2_84/jdtut_11r2_84.html

  Code of the ADF is not added when database objects are added.

• How can I import documents in an FCP project, using the DVD player connected to a MacBook Pro 10.10.5 Super player?

  How can I import documents in an FCP project, using the DVD player connected to a MacBook Pro 10.10.5 Super player?

  You need to rip a DVD? Try MPEG Streamclip or brake hand. Both free. Streamclip better, but much more complicated to install and use.

• After downloading the recovery "Disk Drill" software it installed an SSD SM768E monitoring program.  I have not used the software "Disk Drill"

  A SM768E of SSD monitoring program is running on my computer.  It appeared after I downloaded, but did not use the file "Disk Drill" and deleted recovery software.  I can't get rid of the monitoring software SSD.  Spin El Capitan 10.11.5 on a 16 GB MacBook Pro retina with processor Intel Core 17 2.7 GHz.  By clicking on the icon tells me to go to "Disk Drill" but its been deleted.  Can I temporarily stop the control, but it starts every time I put on.

  http://help.cleverfiles.com/how-to-uninstall-disk-drill/

  You may need to install the SD to remove it completely

• I can not use the command share in safari, mail, notes, etc. since I updated to El Capitan (10.11.5). No way to solve it. Please help me.

  I can not use the command share in safari, mail, notes, etc. since I updated to El Capitan (10.11.5). No way to solve it. Please help me.

  There is a problem with your installation of OS X. The easiest way, but not the fastest way to fix it is to reinstall the operating system. Unless you are in a hurry or have measured access to the network, it is what I suggest, especially since I don't know if there are any problems with the installation. Please backup all data before reinstalling. You won't need the backup unless something is wrong.

  The below, advanced shortcut if it works, can save you some downtime (and the cost of a download of several gigabyte, if necessary.)

  1 back up all data.

  2. disconnect all external storage devices.

  3. start in recovery mode. Select a language, if you are prompted. The OS X Utilities appears. One of the options is to install OS X. This is not what you do.

  4. This step is only necessary if you use FileVault 2. If you don't know what's FileVault, you use it. Go to the next step. Otherwise, launch utility disk, then select the icon for the volume FileVault ("Macintosh HD", unless you have given it a different name.) It will be nested under another icon of the disc. Select open in the file menu and enter your login password when you are prompted. Then quit disk utility must be returned to the main screen.

  5. Select get online help. Safari will launch. While in recovery, you will have no access to your Favorites, but you won't need them. Load this web page.

  6. triple - click anywhere in the line below to select this option:

  chflags -R norestricted /V*/*/S*/*/Caches

  Copy the selected text in the Clipboard by pressing Control-C key combination.

  7. Quit Safari. You go back to the OS X Utilities screen.

  In the menu bar, select

  Utilities ▹ Terminal

  Launch the Terminal application. Paste in the Terminal window by pressing the command-V key combination.

  Wait for a new line ending with a number sign (#) to appear. Quit the Terminal must be returned to the main screen.

  8. Select

  ▹ Restart 

  in the menu bar.

  9. This step must be performed after the restart, and while you are logged as administrator, not in recovery mode. If you have only one user account, you are the administrator.

  Select and copy this line as in step 6:

  sudo /usr/libexec/xpchelper --rebuild-cache

  Paste in a Terminal as before. You will be asked for your login password. Nothing displayed when you type. Type carefully, and then press return. If you do not have a password, you will need to configure one before you can run the command. You can get a warning to be careful. Confirm. You don't need to display the warning.

  If you see a message that your user name "is not in the sudoers file", then you have not logged as an administrator. Log in as one and repeat this step. You don't have to repeat the previous steps.

  Wait for a new line ending with a dollar sign ($) below what you entered.

  10. make as in step 9 with this line:

  sudo /usr/libexec/*/app_sandbox_cache_builder --rebuild-cache

  You can then quit Terminal.