Do Pr and SOUL use nVidia hardware h.264 encoders?

Similar Questions

• U2415, Nvidia, lines distorted using DP/CDM, use Nvidia 344.11 or beta 344.80

  Hello.
  I just got a new U2415 (manufacturing date August 2014, revision A00).

  Everything was fine with the monitor until I turned it off when I'm out.
  When I turned on the screen back again the text was very distorted with lines on the screen. While in this state the screen every few seconds (can be 1 second or could be 10 seconds).

  Restart the PC has the monitor works again until you turn it off and the same problem occurs. It is 100% reproducible.

  The system that this is the case is a i7-860 with MSI P55-GD85, 16 GB of RAM and EVGA GTX750Ti.

  This problem occurs with the RFP provided the MDP cable (DP on GPU, CDM on the monitor). I also tested with a DP to DP cable with a P2314H, I got and it also has the same problem.

  The problem does NOT occur with HDMI or does it occur when place the monitor in DP1.2 However, when you use DP1.2 there is no display when turn the PC until it reaches windows so this isn't a solution, but a work around as it is kinda useless if you need to access the BIOS.
  Also, the problem does NOT DP1.1 mode in the BIOS. The monitor can be turned and the end BIOS, this problem occurs only once windows loaded (I do not know if it occurs while windows is actually loading due to the wonders of SSD :))

  I also tested the monitor on a second PC running an Intel DH77DF (H77 mini ITX board) with 8 GB of RAM and an i5 - 3470S using the on-board Intel HD2500 GPU. The problem does NOT occur on this UEFI/BIOS, Windows or Linux/Fedora 21 KDE system.

  The used version of windows is Windows 7 Home Premium mini ITX/Intel GPU system and Windows 7 Ultimate on PC/nvidia GPU system.

  Just for further testing, the failure occurs with DDC/CI enabled in mode standard and fast is enabled.

  I also tested with the installed Dell Monitor driver and without, even twice.

  I guess it sounds like the monitor and compatibility with nvidia hardware and/or drivers?

  Is there a way to work around this problem, other than its use HDMI or DP 1.2?

  Thank you

  * edit *.
  I also tested it in SafeMode on the machine of nvidia, where the problem does not occur with a direct start 21/KDE Fedora disc which was also good.
  Even when you change the monitor in mode 5:4. Oddly enough, change the resolution in windows to something like 1600 x 1200 is not to reproduce the problem to set the monitor off, but do resolutions 16:10. (though in 1600 x 1200 sometimes distort the display but market still solve that).
  I also took a few pictures to try to see the but I don't know if you can see a large part
  Fig 1
  Photo 2
  Photo 3

  rss81

  Hello

  I have exactly the same problem!  You never solved the problem?  Thank you

  I have actually met a challenge!
  It is indeed with drivers nvidia, somehow along the way to annoy I uninstalled all of the nvidia drivers and installed the latest Windows update which were 340.92... and all this has worked well.

  Then I updated the driver quite up-to-date, which was 344.11... who also worked.
  Upgrade to 344.75 brought the issue to haunt me again while I was using 344.11 until after hours of Googling around, I found...

  This useful link

  Beta drivers for 344.80 that lists the patches...

  This is a beta driver that addresses the following questions:

  • GeForce GTX 980 poster texture shimmering when on high quality Texture filtering quality.
  • GPU output blurred lines on DisplayPort after a period of time following updated driver.
  • System hang up and black screen after work with some monitors (DP1.2 & 4 K / 60 Hz) + GTX980

  Of course, that solved the problem.
  If someone Dell reads this post, I saw a few other threads with people complaining of the same issue. Could you recommend people update for, at a minimum, this version of the driver? People are going to be blame Dell for the question when this is not the case. Thanks :)
  (Now the only problem with my screen is slightly dark on the bottom but good)

• Download and use of Hardware Diagnostic tool (HDU)

  Here is a great video that shows how to download and use the HDU. The video will show how to access the site where the tool is located, how to download and then shows what the tool looks like when used to access hardware problems. The HDU is used to treat problems as paper jams, quality printing, flashing lights and other issues are hardware related.

  I hope the community finds it useful.

• I just tried to open Photoshop CS6 and received the message that photoshop has encountered a problem wth the display driver and has disabled the improvements by using graphics hardware. Where can I access the update to correct the problem that t

  I just tried to open Photoshop CS6 and received the message that photoshop has encountered a problem wth the display driver and has disabled the improvements by using graphics hardware. Where can I access the update to fix the problem because the link does not show?

  You will have to go the website of the manufacturer of your graphics card and download the current drivers.

• VMware View 5.3 and GRID K2 NVIDIA cards

  Any help appreciated

  I'm running a VMware View 5.3 POC

  VSphere 5.5

  NVIDIA-VMWare ESXi 5.5 319.65xxxxxx.vib

  See 5.3

  SL250s

  nVidia GRID K2

  Question

  1.

  SSH the host

  VT - d (virtual technology for Directed i/o is enabled in the bios, if I run esxcfg-module-| grep vtddmar, it does not appear as a module.)

  Did I miss something or?

  2.

  This may relate to the above I am using cards NVIDIA GRID K2 (2 GPU) for the transmission of the GPU, if I enable the PCI on the hardware parameters on the ESXi host for two GPUS of the card no longer works and you won't see this by running /etc/init.d/xorg status and or gpuvm. If I click on 1 GPU on PCI devices, what happens with the xorg and gpuvm.

  Any help in getting these maps work would be appreciated.

  Concerning

  Paul

  Hey Paul.

  If you mix vSGA (shared virtual Graphics Adapter) and vDGA (virtual Dedicated Graphics Adapter)

  With vSGA you load the driver on the host (VIB) and enable x.org and don't use NOT of PCI Passthrough

  With vDGA, you load the driver on the driver of comments (Standard Nvidia) and NO driver on the computer host and you use Passthrough.

  Which you are trying to use?

  Linjo

• Why my computer loses its cursor and/or loses its and must use the mouse to go back?

  I will be typing along and all of a sudden, nothing shows up on the screen and must use the mouse to get back.

  Also will be done solitare or another game and lose her and the mouse to move the things. Is this a virus?

  I updated my windows and nothing showed as a problem here.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode
  • https://support.Mozilla.com/kb/troubleshooting+extensions+and+themes

• recycling old Apple laptops and Apple Macintosh computer hardware IT inherited in London or UK?

  Hi Apple forum, where could I find out about recycling old Apple laptops and Apple Macintosh computer hardware IT inherited in London or UK?

  Welcome to Simon and Happy New Year!

  I think that your best first step is to ask one of the Apple retail stores in London if they have a recommendation. A group of users Mac (MUG) can also be useful. You can find a group close with this web page:

  http://appleusergroupresources.com/find-a-group/

  A few cups can have a list of people who need computers more alumni who are unable to afford it otherwise. Don and reuse beats recycling.

  Allan

• ENVY 15 t-K200: ENVY 15 t-k200 doesn't use NVIDIA GTX 850 M

  I have an ENVY 15 t-k200 (K2T37AV) with processor i7-5500u, 16 GB of ram, Intel HD Graphics 5500 and NVIDIA GTX 850 M running Windows 10 64. The problem is running any application requiring the use of the NVIDIA card, the computer does not him.  I went into NVIDIA Control Panel to select the NVIDIA card as the preferred graphics processor and selected the NVIDIA for specific programs, no change in performance.  I've updated all the drivers, no change in performance. On paper, this computer must manage the games and apps that I use without problems, but running 3DMark benchmarks, I get very low scores and any graphic training application that I use is minced.

  Please help... How can I get my graphics card work properly?  Is there a bios setting I need to change? Or?

  Thank you

  I contacted HP Support directly (funny, I thought it was part of the HP support). In a Nutshell, it 1) uninstall the NVIDIA driver and card 2) downloaded the latest driver from NVIDIA and 3) installed the new driver.  I checked that the computer was once again work correctly, go to the NVIDIA card if necessary using a program of video reference I used to diagnose the problem in the first place.

  The problem seems to be that if you're updating the NVIDIA driver without uninstall the old driver first, something is not and the rocking computer is more on the NVIDIA card when necessary. The NVIDIA Control Panel will be simply install the new driver updated without uninstall the old driver. Even if you go to HP or NVIDIA and download updated driver directly, or advisor to uninstall the old driver before you install the new driver.

  Even if you install the driver is the latest driver, follow these steps if the NVIDIA card does not work as it should be.

  I used 3DMark demo to diagnose my video card, when he showed my computer run better than 0% of the tested systems, I knew there was a problem.

• I bought a new hard drive. I don't have a system recovery disk. Can I load Windows Vista from another source and activate using my original product key?

  I bought a new hard drive. I don't have a system recovery disk. Can I load Windows Vista from another source and activate using my original product key?

  Hello

  There is no download available from Microsoft Vista.

  Contact the manufacturer of your laptop and ask them to send a set of recovery disks.

  They should do this for a small fee.

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key determines which Edition is installed.

  Builders recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  See you soon.

  p.s. If the old hard drive is still installed and running before you change on hard drives and you never received the to purchase recovery discs, you can make the recovery discs from the recovery Partition which should be on the old hard drive. You will need to request that the manufacturer how to do as each computer manufacturer has their own way of making records of this partition recovery.

  It depends on the old hard drive still works.

• The use of hardware accelerated the transition css to an element with SOUPLESE

  Hi all

  I created an item twice the width of my step and want to move on the screen when a button is clicked.  The problem is that the animation is not smooth at all.  He stutters and gasps like an old car! I was wondering if it is possible to use a hardware accelerated transition css to move in a more fluid way.  If possible could someone please give me example of what code to write and where?

  Thanks and good luck!

  There are several ways to do it, but I would use a style sheet. So:

  1. Add to the stadium "creationComplete" event: sym. $(" ") .appendTo ("#Stage");

  2. create a style sheet (text file) in your project named "styles.css" file and define a class:

  {force-webkit-acceleration

  -webkit-transform: translate3d (0,0,0).

  }

  3. give your item hosted class "force-webkit-acceleration" in the properties panel (the small icon of c-in-a-box next to the title field).

  Make sure that the style sheet file is in your folder "publish web" too.

• Problem with AE and SOUL - dynamic links?

  I use after Effecs CC and I try to open the file .aep in Adobe Media Encoder CC (for export to MPEG format).  I get an error stating: "Could not connect to Adobe After Effects.  Check that the Aobde After Effects and Adobe Dynamic Link components are installed'.

  I have both AE and SOUL open and running.  In the menu for AE, I have the menu available dynamic links.  However, when you open the file .aep in SOUL I still get this error.

  -Dave

  Make sure that the SOUL and After Effects are updated to the latest version: SOUL CC 7.1 and after effects CC 12.1.  If there is a version mismatch it can lead to problems of dynamic links.

• Output H.264 fails in After Effects and SOUL

  I'm having the same problem - export H.264 crashes into the 01:03 score every time. DNxHD is very good.

  Dragging comps to Adobe Media Encoder and trying to make there do not work either.

  My installation of CS6 [last week] is done on a computer nine to eight double heart Dell Precision T7600 with Windows 7.

  It is ridiculous to say that we should not make H.264 on After Effects. Sometimes I return 50 + TV commercials at models of composition for the delivery of a multitude of media - each with slightly different characteristics.

  Even if the SOUL is a workaround, dragging all these comps on a crippling waste of time.

  It is a problem with Adobe, and we've all lost too much troubleshooting time and talk about it. PLEASE CORRECT.

  Thank you.

  There is a bug in the Apple for QuickTime H.264 encoder.

  If you want to avoid the bug, the best thing to do is not to use Apple's H.264 encoder.

  When you encode a movie .mp4 in the SOUL, he does not use Apple's H.264 encoder. When you encode a file with H.264 .mov, it uses Apple encoder.

• Old lock to activate ipad asking for Apple ID and password used to configure icloud, which is forgotten. Help?

  My older ipad bouchoirs activation requires Apple ID and password used to configure icloud. I think I know the ID because she tips ***@outlook.com, but not the old password. Help?

  Try https://iforgot.apple.com

  or

  Contact Apple for the Apple ID account security support

  https://support.Apple.com/en-us/HT204169

• Inject an apple ID and PW using the Configurator 2?

  Hi all

  Wondering if a id apple & PW can be added to a profile and deployment using the Configurator 2. Sorry if this has been covered, am new to this and learning and discovery I.

  see you soon,

  Kristian.

  Hello, Kristian,.

  AC2 negates the need to have a configuration of account iTunes\AppleID on each device, can I ask why you wanted to do this, there may be a better way? ipads how are you trying to install? ipad users can add their own iTunes account to download other additional applications then deployed via the configurator.

  Kind regards

  Rick

• Got a 27 "monitor from Apple, with thunderbolt (error). My MacPro can't love at first sight. Apple won't bring back the monitor. Will using a USB 3 map and then using a hard drive with USB 3 and Thunderbolt works?

  Got a 27 "monitor from Apple, with thunderbolt (error). My MacPro can't love at first sight. Apple won't bring back the monitor. Will using a USB 3 map and then using a hard drive with USB 3 and Thunderbolt works?

  N ° you need a computer logic board which has built in Thunderbolt.