Dock/car driving mode - Possible problem

Similar Questions

• Music from Apple (ios 10) with problems of dock car

  Hi, I use Apple music on an ios Iphone SE 10 with dock car;

  Since ios 10 update, radio can't play music in shuffle mode selected directly from the phone, but only if selected on the radio buttons (very unconfortable)...

  If I play a playlist in random mode from the phone, when I switch the track of steering wheel controls, there no follow the queue play generated, but get a song randomly without rational basis... very frustrating

  My car (Hyundai i30) worked perfectly with ios 9...

  Hi an_ita,

  I have a Hyundai Elantra (the equivalent American i30) 2013 and when connecting my phone to the car with USB port, the flying track controls do not work in the ios 10. I used to be able to change the path of a song in ios 9 very well. The music app Apple and others like Google Play, Spotify, etc. were very well in ios 9. In ios 10, if I change the track, it causes the phone to disconnect from the car. It seems that Apple has some work to do to correct the compatibility with cars when you connect to them with the USB port.

• Motorola Assist lack of driving Mode

  Hey guys, I got the bike g 2014 US version. I love it, I have a small problem though, the assist from Motorola has only 2 options, sleep mode and the mode of the meeting. I saw on YouTube there are more than that, like driving mode and other things. But I don't have those. No idea why? Thanks in advance

  Hey, I got a message this morning update Motorola text, he linked using Motorola, I don't know why, it is still new to the phone, but in any case, this solves the problem and who drive, fashion and home showing in there. Thanks for the help, I hope this will help others also. Dave

• blue screen "possible problem with SPCMDCON. SYS

  all about office went< only="" program="" available="" and="" showing="" is="" mcafee=""> bed blue screen "possible problem with SPCMDCON. SYS '.  Hard drive reads accurately but very little available. Get pop up of the AV PROTECTION ONLINE DECLARING PAY 59.95 AND we will solve the problem. also the problem States is due KEYLOGGER ZEUS, please help

  Hello

  1. are you able to boot to the desktop?

  If you are able to boot to the desktop, run the antivirus scan and then run the System File Checker.

  Step 1: First we will analyze the system for infections using the Microsoft Security Scanner which can be downloaded from the link below:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Step 2: Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  (a) open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  (b) type the following command and press ENTER:
  sfc/scannow
  The sfc/scannow command. analysis of all protected system files and replaces incorrect versions with appropriate Microsoft versions

  If you are not able to boot to the desktop, please start the system in safe mode and follow the steps mentioned above.

• Possible problems with opening and El Capitan

  I just bought a mbp 15 "and upgrade to el capitan for I had read that work with the new OS, but when I tried to install a pop - up came saying that installation will take place, but that it could damage the computer, so I called apple for more advice on the issue, but given the fact that I live in the Mexico proapps guy could not help me. Now I'm going to try my luck, but what would be the possible problems that I could meet and would be set by an errase 'factory '?

  Specifications of the computer:

  MacBook Pro (retina, 15 inch, mid-2015)

  Processor: 2.5 GHz Intel Core i7

  Memory: 16 GB 1600 MHz DDR3

  Thanks and forgiveness English...

  I have the opening on the MBP, where I El Capitan (10.11.1) installed and I had no problems with it.  What version do you have?

  Ciao.

• my computer screen stops working after about 30 minutes. Computer is not affected. What is the possible problem?

  Monitor turns off after about 30 minutes. Green light stays on. Computer keep going tom exploit.

  Must turn off monitor for several minutes before you post again. What is the possible problem?

  Maybe this article would provide a few ideas:

  Adjust Windows XP Power Options
  http://www.lancelhoff.com/adjust-Windows-XP-power-options/

• The Atrix dock car

  Hi all

  I've been running my Atrix with webtop without no problem, however, I bought a car dock yesterday and have not been able to have the car dock to launch the app at all.

  At first I thought it was because the USB slot on my helmet pushed only 500mA as opposed to 1000mA and thus, perhaps, the phone was not recognizing the dock. So, I went to radio shack and bought a fast charger which grow a 1000mA to see if that would make a difference. No dice. I tried to turn my phone on and off as well as activating / disabling the various switches to power satellite, wireless and bluetooth, and that does not work either.

  I had a problem with the speaker of the phone then I exchanged it for another new Atrix address this problem of rattling. I had hope that maybe a new phone would also good launch of the car dock app. That no longer works. Needless to say, I still love the phone, but I'm tired of trying to have the car dock function correctly.

  I can do to get the car dock app runs automatically without having to download a third party home app?

  Any help would be greatly appreciated.

  Thank you

  Chris

  
  

• DROID MAXX camera &amp; Dock car Griffin

  I think I found a bug using the camera while the camera is embedded in the car Dock Griffin. Not a big deal, but it would be great if this could be studied, and possibly fixed in a future update of camera for the Droid Maxx. I have attached a photo of the dock that I use and some screenshots in a word document.

  Firmware: 12.7.7.obake

  UPDATE: I went and spoke with a representative of Verizon and it was able to verify this bug with an all new MAXX DROID and a brand new Griffin Car Dock it in the store. So I'm leaning towards it being a bug in the software of the camera or something that has to do with the tag NFC in the car Dock Griffin himself.

  Thank you

  Brandon

  I reported this to Matt. I saw the same thing on my Maxx. I was able to select the entire document, but it sure is not appear correctly. Thanks again for reporting this.

• EOS Rebel SL1 Mode Dial problems

  Hi, I don't know much about cameras, but I've always wanted a nice like that, and a friend of mine told me that the SL1 was good for beginners. It came in the mail today and I just started to experiment and play around with it. I don't know if it's something I did by mistake or it's just a problem with the camera, but I realized that the Mode dial is not correctly programmed. In order to develop if I had to turn the knob to the symbol A + (I'm sorry if this isn't what it's called), the camera will enter the function of sports. I'm sorry, but I really do not understand this and I would love it if someone could help me. Thank you!

  Hmmm.

  On this camera, the sport mode is directly opposite the position of the mode A + (Auto).  There is a small pip as an indicator on the camera on the left side of the dial.

  Are you sure you look white pip and not power on leverage as an indicator?

  If so, that's the problem.

  Otherwise:

  Do ALL modes to register as one just in front of the right pair, or they are all Sports are random or something?

  Patterns are printed on a sheet of thin "cap" which is literally glued on top of the handle.  I know because mine fell once and I had to stick on.  I guess it's possible they put on back at the factory, but I don't think because there was a small crack in the button and a tab in the CAP, which have to align or well you can not set the cap in the flush.

  If you read right and the button won't you need to return the camera.

• "You must be logged in as an administrator to install this program" error when I AM logged on as administrator. possible problem with TrustedInstaller security

  I am logged in as administrator on the single computer.  I try to install Net Nanny, which claims to be compatible Windows 7.
  The first time I tried to install it I got the error, simply, 'access denied '.  After several attempts with the same error, I rebooted in Mode safe mode with network and then got the error that the Windows Installer Service is not accessible.  After some research, I discovered that Windows Installer is not available in safe mode.
  So I booted in Normal mode.  Logged as administrator.  Tried to click with the right button on the installer downloaded for Net Nanny and ran as administrator, the connection of the administrator.  Now I get the error, "You must be logged in as administrator to install this program."  I am.
  I closed all firewalls, anti-virus software AND turn off the UAC.  I checked the compatibility AND security for the download tab and it is configured to run as administrator and I tried to run in several modes of compatibility.  I still don't "You must be logged in as administrator to install this program."  No matter what I try, I still get this error.
  I used the command prompt, type msiexec.exe / unregister, and then msiexec/regserver.  No new results.  Still the same error.

  I called Net Nanny press SEVERAL times and they will know that this is a Windows problem, because this is the first time that they already got this error.  They had me to download another file on a mirror site.  Not always the same error.  People what I'm doing wrong?  I was able to successfully install other software.  Thanks for any help!

  UPDATE * I am researching always this.  This would be a TrustedInstaller security problem?  If this is the case, is it possible to fix the TrustedInstaller or turn it off?  The big question, is that I want to turn it off?  My first thought is 'no '.  However, this software is listed on the Microsoft site as being compatible with Windows 7.  Therefore, an application that is 3rd party that is accepted by Microsoft.  Wow, I'm confused.  Don't know what to do here.

  Hello carpetfresh,

  A test, I temporarily disable user account control and then see if you can install Net Nanny. If so, we know that UAC is what is causing the problem with the installation.

  1. access control panel user to the Start Menu-> Control Panel-> user accounts and of security for the family-> user account

  2. click on the settings of the user account controll link.

  3. move the slider to never notify

  4. click OK for the changes to take effect

  5 reset.

  Once you have correctly installed the Net Nanny, then back to the control panel and reactivate the UAC.

  Answer please come back and let us know.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• EXTREME slowing windows 7 professional 64-bit response time, possibly problem driver network adapter? Help, please!

  I have Windows 7 Professional 64 bit installed on a computer, I built

  Data sheet:
  Processor Intel i5 750 (stock clocked & stock cooler)
  Card mother Gigabyte GA-P55A-UD3P
  G. Skill Rip jaw DDR3 1333 RAM (standard timings)
  Western Digital 640 GB SATA HD
  Card EVGA 8800 GS SC Video
  Creative Sound Blaster Audigy SE sound card
  Powersupply Coairsair 650W
  Samsung SATA DVD writer

  My problem is, after I started and had my computer running for a significant amount of time (30 minutes to an hour), I loose full internet connectivity and the response time for any action I'm trying of the preform is from 30 seconds to 5 minutes.

  This problem occurs almost every time my computer is started for a significant amount of time, and it's extremely annoying.

  First Firefox, Google chrome, or internet Explorer stops receivers internet connectivity (because it is not sailing to any web page) but still related reports.

  (during this time and on my computer don't report any anomaly, IE CPU utilization / ram uses / temperature are amounts all acceptable)

  I usually try to close my browser (s) web, but its reports "not responding" and I cannot close or even end the process or the process tree, so it runs as a process. From there a program or a click I do I try to run either doesn't work or takes 30 seconds to 5 minutes to register if they register at all.

  Programs I all ready have running continue to run, IE Vuze, WindowsMP, Zune software, openoffice. But once that I close them I can't reopen.

  Any program I try to open starts a process in the Task Manager but it not to start a program or actually run, and I can't used to finish the tasks that do not work properly.

  If I try to shut down windows, it takes a minute or so to begin to disconnect, then he sits on the "logging" off the screen until I use the power switch to kill the system.

  I suspect that it may be a problem from my network card driver (Controller Realtek PCIe GBE Family, latest version downloaded directly from the Gigabyte website for my motherboard) because the question almost always starts when my internet stops working. However, this may be 2 combined numbers.

  I had this problem and I thought it was because of an installation of bad windows 7 so I erased the hard drive and did a complete new installation, but the problem is back!

  I changed my routers settings to give me a fixed IP address to dismiss questions here. All the other computers in my House have access the internet without interruption during my problems. And no other computer in my house has similar problems.

  I reinstalled the network once drivers without success.

  I would like to address the downturn extreme Windows 7 after half an hour or so if possible because I have other NICs lying there if the problem comes from the network card.

  I'm pretty computer savvy and I've exhausted all my ideas, so any notice are useful! Thank you

  OK, so I think that the slow issue is resolved now. I blame intel speedstep, while part of my problem is fixed.

  Internet connection problems still remain.

  I ran my computer in safe mode with network for about 2 hours. When I booted in safe mode, everything was fine, internet connetion worked on download and upload at full power. I let it sit for an hour or two in safe mode and I came back and there is no internet again, as usual. All my browsers (internet explorer, my main browser firefox and chrome) refuse to function / load anything and their work will not end in the Task Manager. The device says it all works and it (network adapter) said I have a connection, but I am squatting me on my browsers or any other uses of the Internet. This test will run on a network interface card that I installed, with drivers. I did him wrong with shooting my motherboard cable network and its software driver port. This new card gives the same result, so I think now I know that this issue has nothing to do with my physical port or its drivers.

  The only things I can think that it either now are either:
  my router
  However, all the other computers in my house (3 of them, 1 win XP), 1 Win 7 64 bit pro, 1 Ubuntu and my Xbox 360 not having this problem and works perfectly

  or

  Something inside windows 7 that control the browsers or manages connections,
  I think it's most likely due to the fact that my browsers have problems in the Task Manager / they do not work properly

  All reviews are useful,

  Thank you!

• Monitor / Desktop random feeds problem - OS Possible problem

  Hello world

  Thanks in advance for any advice you can provide.

  I replaced my old HP Pavilion Desktop in 5 years with a new desktop computer HP Pavilion (HPE-180 t).  I have always used the new computer since June 14, installation of software, scanner, and printer etc... I have a problem that has cropped up twice in the last week.  I will not detail the problem and troubleshooting below.  Please take a look at my questions at the bottom of this announcement to provide any help you can.  I appreciate all the advice!

  THE SYSTEM CONFIGURATION:

  1-HPE-180 t, Windows 7 Pro (64 bit), Intel Core i7 - 930 quad-core CPU @ 2.80 GHz, 8 GB RAM, Nvidia GeForce GT 220

  -NOTE: It was a CTO system.  When it was ordered, it came with Windows 7 Home Premium 64-bit.  When I got the computer, I did a clean install of Windows 7 Pro 64 bit.

  -NOTE: When the computer was ordered, I bought the 1 TB RAID 0 hard drive option (2 x 500 GB SATA HDDs).  When I got the computer, I disabled RAID 0 and set up two 500 GB drives hard drives no RAID independent.

  2 disk Management shows:

  -Disk 0, Basic, 465,76 Go, online

  a. reserved system, 100 MB NTFS healthy (System, Active, primary Partition)

  (b) (C, 244,04 GB NTFS, healthy (startup, files, crash dump, primary Partition of the Page))

  c. New Volume (B, 221,62 GB NTFS, healthy (Primary Partition))

  -Disc 1, 465,76 GB, online

  a. New Volume (P, 465,76 GB NTFS, healthy (Primary Partition))

  PROBLEM:

  1. on 7/27, I left the House at about 19:00 with computer.  I went at about 22:00.  The monitor was in STBY (power led is orange) but the tower was still active (blue power LED) and he was blasting.  The tower should have been in STBY mode as I have the computer configured for the management of the "Balanced" diet, where the monitor turns off after 10 minutes and the computer goes into sleep mode after 30 minutes.  I tried to wake up the monitor by moving the mouse and then pressing the keys on the keyboard, but no response.  I finally had to hold down the power button on the computer to turn off, waited a few minutes, then return to work the computer.  No error was reported.

  2. the same problem occurred 8/4 (yesterday) at 17:30.

  TROUBLESHOOTING WITH CV:

  I called HP after both and here's troubleshooting that occurred with each instance:

  1. to 7/27:

  -Technical support took control of the computer

  -Looked under the (Local) computer management / system/view tools but found nothing of value

  -Done a disk cleanup on drive C:

  ((- Remove temporary files in the following folders: a) start/run/enter/%temp%, b) start/run/enter/prefetch

  -Do you have a Check Disk via start/cmd/select/r-click/Run as admin/chkdsk

  -Checked Device Manager and not found any problem

  (((- Analysis of HP Tech: a) the computer woke up to the top for any reason, but the monitor was still asleep, no communication between the monitor and the computer, if happen, and then restart the computer and call HP, b) all software and hardware checked with no problems found, c) do a "Disk Cleanup" and remove temporary files once a week and do a defrag once a month.

  2. for 8/4:

  -The first thing that the HP support said was that it might be a static electricity problem.  He didn't check the hardware.  I will note that when I went home to be there for the morning and afternoon, two of our ceiling fans running at high speed with the fan lights.  This usually means that there is some sort of disruption of supply.

  --Mettre put off the computer, disconnect all devices from the front and the back of the computer, hold the power button / stop for 20 seconds, then reinsert entered computer for food and the mouse and the keyboard, and then do a system restore from 8/2 @ 17:45.

  -Restart the computer, press F9 continuously to implement Diagnostics which tested the CPU, the memory, two 500 GB hard drives and two readers of DVD and the Path... start all past.

  -Shut down the computer for 2 minutes.

  -Turn on the computer and press F10 continuously, not a Smart short self-test on disc 1 (which I think is drive 0 because the other disc was called disc 2), then made a Smart extended self-test on disc 1 (who took almost 90 minutes)... all two passes.

  -HP Tech analysis: there is no problem with the computer hardware.  Tech believes strongly that I encounter this problem random comm because I installed Windows 7 Pro (64 bit) on this computer that was initially loaded with Windows 7 Home Premium (64-bit).  He also suggested that I have create via the tool HP recovery disks and perform a destructive recovery on the computer to return it to its original state and then reload all necessary software and hardware.

  QUESTIONS RELATING TO THE:

  1. do you think that this could be a simple matter of a disruption of energy in the home, causing this problem of communication between the monitor and the computer?  If so, would simply need to buy a surge protector better?

  2 do you think I have my install of Windows 7 Pro (64 bit) on this computer that was initially loaded with Windows 7 Home Premium could be the cause of this problem?

  3. any ideas how to do to troubleshoot/correct this problem?

  Thank you very much

  Angela

  ``````````````````````````````````````````
  old computer: HP Pavilion PU131AV / a1050y, Intel Pentium 4 CPU 3.20 GHz, 2 GB RAM, Windows XP MCE, SP3 32-bit, Nvidia GeForce 6600
  new computer: HPE-180 t, Windows 7 Pro (64 bit), Nvidia GeForce GT 220, Intel Core i7 - 930 quad-core CPU @ 2.80 GHz, 8 GB of RAM

  UPDATE:

  My solution to solve the problem:

  I bought a power supply (UPS), connected to the computer and have not seen the problem since.

  Take care

  Angela

• FM-9: switch display Mode creates problems

  Problem

  When switching to mode screen in full screen with ESC, S, M, f, then in normal mode by ESC, S, F, window u FM covers the elements that are seen by other applications in order to reduce the area of the screen (see attached images).

  • The taskbar is no longer visible
  • The application of RipBar launch is no longer visible
  • FM extends to the right, so much, that high Windows on the right (minimize, maximize, close) keys are not visible. They are not on the second monitor!

  These items cannot be made visible, if it is not possible to switch to a different app with ALT + TAB

  Environment

  FM 9.0.3, Windows XP SP3, dual monitor (FM to the left)

  To return to normal

  To get the correct display once again, I have to close FM via its icon (System menu) and reopen FM.

  Questions

  • Is this a bug or a feature?
  • It happens only on two monitors?
    

  Klaus,

  Shouldn't you be switch back to 'Standard' of the screen mode - esc S M s?

  Esc S M u is the mode "full screen with user interface" and there is no top shut, reduce or restore buttons.

  Note: you can always right click in the window of FM to get the context menu and use the option "Toggle screen Mode" to access the correct screen view.

• Application of the Dock car

  When I look at the running applications (start |) Menu | Manage Apps | Running tab) I see an application called CarDock running. I do not see this application in the application list and can't access it any way.

  Does anyone know how to do?

  True, same thing with the cliq 2 dock. I have separate screen lights up when it is connected. Its just bigger and other buttons for driving.

• DRIVER_IRQL_NOT_LESS_OR_EQUAL normal mode startup problem.

  I have a HP Mini netbook. Everything works fine until there is when a security alert 4 days prompted a Trojan virus had been detected. Thought I had dealt with the problem (ran antivirus scans and problems quarantined). Turned on netbook 2 days ago and after Windows XP Home SP3 message/screen "Welcome" appeared for about 4 seconds what a BSOD is displayed with the following error:

  DRIVER_IRQL_NOT_LESS_OR_EQUAL

  Technical information

  STOP: 0X000000D1 (0XA0223408, 0X00000002, 0X00000000, 0X886D19A8)

  I can load Windows in safe mode with network. I don't know what to do. I downloaded and ran SpyBot and it has some problems, but has not solved anything.

  I scoured several tech forums (including this one), but there are so many problems of type 0x000000D1, and so I am at a loss as to how I should proceed.

  I hope someone can help me understand this.

  Thanks in advance.
  I hope someone can help me with this.

  Hello ChrisDolan,

  If we can start in Mode safe mode with networking, then we have a problem with something loading at startup.

  The following article will explain boot minimum troubleshooting:

  How to configure Windows XP to start in a "clean boot" State

  Let us know if that helps.

  Best regards

  Matthew_Ha