DRIVER_IRQL_NOT_LESS_OR_EQUAL normal mode startup problem.

Similar Questions

• The problem in normal mode startup

  I cant start my computer in normal mode, but it works in safe mode. In normal mode it is only white screen after windows logo, although I can hear audio starup. I ran diagonistics HP and it showed the failure of starting with ID MC108X-55M78D-XD6U2K-C08L03. Please help me to start in normal mode, Windows 7 home

  OK, you have to solve the problem by using the method of "clean boot".

  This is a somewhat tedious process, but should allow you to find the problem.

  Very simply, you disable all programs start and Non Microsoft Services. If the computer starts Windows OK then you return an enable half of the commissioning of programs and services, and then try again. Eventually you will be reduced to a program or service that is causing the problem.

  Here are the details on how to troubleshoot using a "clean boot".

  Clean clean boot

  Microsoft Certified Professional
  CompTIA A + Certified Technician

• Firefox 4.0.1 shows almost all of the text in bold. I start to record mode and sound fine, but when I disable all the addon then start in normal mode it broke again.

  So I updated last night, this morning I noticed that a lot of the text on Web sites are in bold.
  For example when doing web yahoo mail unread messages must be "BOLD", while read messages shouldn't be now, they are all "BOLD" anything.
  I started in safe mode, thinking that an addon was broken and at the normal search that seemed to confirm that.
  So I disabled all the addon and manually restarted in normal mode, the problem was back.

  I confirmed all was the addon still handicapped and restarted in safe mode once again, fixed... so I disabled both the plugin and extensions... still broken in normal mode.
  At one point I thought it might be the default aspect so I downloaded one that looks like 3.6 and this one broke... again.

  So that's what I'm wondering, what is not loaded in safe mode which is always loaded when you manually turn off all extensions and plugin?

  This could be a problem with the new features related to the police who are trying to use your graphics card. You can enable those here:

  Tools > Options > advanced > [disable] "use hardware acceleration when available.

  (It's one of the things that turn off safe mode.)

  I don't know if you'll see results immediately, or if you must restart Firefox.

• XP home sp3 startup problems - still starts in safe mode

  Hello

  MY OS is XP HOME SP3 on a 3200 Averatec serieis.the startup cannot be completed and moves only to security mode.all other debugging options, last good state and directory... I tried are blocked and place an order for safe mode! I have tested several Anti spyware software and antivirus, but found nothing as a threat or a spyware! on the other hands I don't have my OS systems with my recovery disks now cos they're in Toronto today and I'm in Asia.

  Is anyway for me to find a bootable disk image cd as a solution? or can I solve the problem without any boot cd.

  Thanks for any help

  Hi Tatiana,

  1. Did you the latest changes on the computer?
  2. What happens when you try to start in normal mode?

  Check if the below mentioned settings are correct on the computer in safe mode.

  (a) click on the start menu, click Run.

  (b) in the run box, type "msconfig" without the quotes and click OK.

  (c) click on the 'BOOT. INI"tab and uncheck" / SAFEBOOT ", click 'Apply', 'OK '.

• Stuck on a black screen on startup in normal mode.

  Vista Home Premium 32 bit SP2

  Every time I start up in normal mode I meet the dreaded black screen with cursor. I do ctrl alt delete to get the Manager of tasks and processes, I end explorer.exe and then start a new explorer.exe task that happens to me in my office in normal mode. However, the internet and most of the other programs do not work.

  I then restart and boot into safe mode, where internet and most everything else works as expected in safe mode. I tried startup repair and system restore. Running out of options... not very good with computers... spent the last week reading of many solutions on here and google.

  I hope someone can give me some advice on what to short to do a clean installation of vista. As I said, I can get it on in safemode and things work very well, it tries to start mode normal, that's the problem, and even once I get to the desktop in normal mode, nothing works well. I appreciate any help on this. Thank you!

  Hello

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure)
  CTRL + ALT + DELETE and on the tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
  by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you don't have the disks your
  system manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (making the system restore it)
  must be bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
  (if all goes well, the data records and need to reinstall programs). Be sure to do a good backup or three.

  You can use another DVD that aren't copy protected but you you need to own
  Product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (a line type or copy and paste one line at a time and hit enter - enter a bracket)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)

  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Firefox crashes on startup in normal mode and safe mode does not start reset mode

  using 26.0 FF
  using windows 7 Home premium v 6.1 (last)

  My problems started after the loading of 26.0 FF. If I start FF in normal mode it crashes. Same thing when I boot in safe mode. I close FF (while it's hanging) by clicking on the X in the upper right.

  When I launch FF in safe mode and click Reset FF, it crashes without FF never appear. I have to stop it using the Task Manager. Off mode reset, I can launch FF in normal mode and everything works fine. However, stopping FF does not close it. I have to use the task of the Manager close. Then I'm at square one when you try to start FF, i.e. reset firefox, crashes, Task Manager, stop, then start FF.

  When FF is on, I can open a new window of FF. All my addons are up-to-date. I reinstalled FF 26.0, three or four times.

  I deleted the cache and cookies.

  I scanned for viruses and rootkits etc. with microsoft security essentials and spybot.

  I've been a happy user of FF for over ten years and have never had a problem like this. Any help will be appreciated.

  Thank you!

  I think that I fixed it, it gives a trial because he has started to do this on my two PCs.

  Go to Options > general tab > start switch / "Show a blank page" and the charges of all good. What I used was 'Show my home page' which is the default page of Firefox with the Logo of Fox and history, Favorites and other options at the bottom.

• Problem with VI in Normal Mode, but not in execution to highlight

  Hi all

  This is my first post in this forum and I hope you can help me. I'm sorry for my bad English, English is not my main language.

  Now to my problem. I did a CNC with Labview machine, the machine has been built with a Lego Mindstorms NXT.

  The VI should read the lines in a text file, which a good movement for engines (G-Code). Mindsotrms LEGO NXT is connected via USB to the PC and the computer races VI target Mode. The VI is made in the 2011 Version of Labview with the Addon of NXT from Lego.

  Now the VI is finished, but he's going to correct work only in the Mode of execution to highlight (but he engines are not sync and his extremely slow). When I try to run the VI in normal mode, the engine for the port B does not work.

  Please can you help me.

  In the attachment, there is the VI (and an example of the G-Code (Code G example of Quadrat) file.

  Thank you very mutch.

  Kind regards

  Alex

  Your control loops seem to run (using all the CPU on the NXT loading) independent and probably cause famine across the loop.

  

  Add a delay here to minimize the problem.

  Not sure if it does help.

  BR,

  / Roger

• HP Pavilion dv6 starts request at startup startup normally or repair problem

  Hello, HP Pavilion dv6 starts to start normally or Startup Repair request. Results of normal boot BSOD too fast to read.

  Startup Repair in execution, but 13 hours still not repaired. What should I do? My computer knowledge is poor in good conditions, but I'm at the point of turning into an expensive Frisbee. The fact that I have to use this UM netbook that will soon be a Frisbee is driving me crazy!

  It's a venerable laptop purchased Feb 2010. It is a Pavilion DV6 (model DV6-2005-TX) running windows 7 Home premium (32 bit) and updates only did a request from Microsoft, so are a lot of patches and fixed security.

  Help will be very humbly and grovellingly welcome.

  Hello

  The error code is different from the first, it is still a short drive self test failed and confirms that the drive must be replaced.

  A brief overview of how to replace the hard drive is detailed below.

  The player at the link below is an example of one that would be perfect for your laptop.

  Hard drive 500 GB

  The procedure to replace the hard drive begins on Page 53 of your & Maintenance Guide.

  Once this is done, simply use your recovery DVD to reinstall the operating system on the new drive - this is described in the document of HP here.

  If you do not have your recovery discs, you can order a replacement set using the link below.

  Order HP recovery disks.

  If you have a problem with this link, order them directly from HP.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

• Windows 7 black screen with the cursor of the mouse in normal mode and safe

  Hi all
  I hope someone can help.
  Laptop downloaded updates and after the restart will only go to a black screen with the mobile mouse cursor.
  This occurs in safe mode, normal mode.
  I tried all variations of safe mode and still the same thing happens.
  Last known configuration does not solve. (i.e. no restoration or image to enter)
  Using the vista win7 dvd upgrade or a linux dvd and screen appears as you expect his obvious system is very good.
  I tried the options on ctrl alt del, ctrl shift esc etc etc, but I cannot go into Control Panel, or a any part of the win7 GUI.
  Best I can do is access via the command-line... any thoughts on how to fix?

  Hello

  Welcome to Microsoft Windows 7 answers Forum!

  You can try the following steps and check whether the problem is resolved.

  You can disconnect all external devices except the keyboard and mouse and check if you are able to boot to the desktop and check.

  I also recommend what to do the Startup Repair. Follow these steps:

  To perform a Startup Repair follow these steps:

  1. Insert the DVD of Windows 7 and restart the computer.

  2. when we are asked to press a key to boot from the DVD, please press enter or the SPACEBAR.

  3. choose your language settings, and then click Next.

  4. click on repair your computer.

  5. Select the operating system you want to repair, and then click Next.

  6. in the System Recovery Options menu, click Startup Repair. Startup Repair can invite you to make choices as it tries to solve the problem, and if necessary, it may restart your computer, because it makes the repairs.

  Access the link below for more information on the Startup Repair:

  http://windowshelp.Microsoft.com/Windows/en-us/help/5c59f8c1-b0d1-4F1A-AF55-74f3922f3f351033.mspx

  See also:

  http://social.answers.Microsoft.com/forums/en-us/w7install/thread/ab43493b-247C-427e-BA21-4950eea279ac

  http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/24b44a01-872e-4d87-867f-ed01a3579031/ for the black screen problem

  Thank you, and in what concerns:

  Suresh Kumar-Microsoft Support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot start in normal mode.

  my computer will only work when its on safe mode or safe mode with networking, it does not work or crashes in normal mode, why?

  Hi briancooper1979,

  ·         What operating system is installed on the computer.

  ·         Do you have an error message when you try to start in normal mode?

  ·         Remember to make changes to the computer, after which the issue started?

  Start in safe mode and put the computer in a clean boot state to solve the problem and check if it helps. You can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  How to configure Windows XP to start in a "clean boot" State

  Also, see the section on how to restore your computer to a Normal startup mode by following the in the link of the article mentioned above, after you perform the clean boot troubleshooting.

  I hope this helps.

• my computer starts in safemode, if I start it in normal mode it starts bt not functions

  If I start it in normal mode it starts bt no functions, no matter what program do you have

  is not open

  Safe mode is only running with the bare minimum of tasks and processes to start Windows.  Normal mode adds a bunch of other "stuff" to this mixture.  The conclusion is that you have a program or task that is running in Normal mode but does not work in Mode safe which is causing your problem.  General approach to solve problems like this is an iterative process, in which case you disable certain parts of the stuff that runs when you start your computer normally. There is a built-in tool to help with this called 'msconfig' (start-> Run-> "msconfig").  Another tool is "AutoRuns" from Microsoft

  AutoRuns: <> http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx >

  Using msconfig, you must start safe mode, then start in "msconfig".  Start by clicking on "Selective startup" and uncheck "Load Startup items".  Click "OK" and restart your computer normally and see if the problem disappears.  If this is the case, relaunch msconfig, click on the "Startup" tab and start allowing items by touches with a reboot inbetween.  If this does not resolve your problem, try unchecking the "Load System Services" tab and repeat.  The General procedure is described here:

  "How to solve configuration errors by using the System Configuration utility in Windows XP"

  <>http://support.Microsoft.com/kb/310560 >

  HTH

  JW.

• Cannot activate windows in safe mode, but blue schreens windows in Normal mode

  I'm trying to reinstall Windows XP Home Edition on my Dell Inspiron 600 m laptop.  When he has finished with reinstall it it a blue screen when you try to start in windows Normal mode.  I found on the web that this problem has to do with hardware drivers and is resolved by installing service pack 1.  I can't install service pack 1 because when I start in safe mode and you click a user or administrator, it says this product must be enabled (which can be done in safe mode).  I'm stuck

  How can I me is service pack 1 installed or this computer enabled if I can't start Normal or go beyond the notice of activation in safe mode?

  Ok.  Here's what I had to do:

  If you boot into safe mode (without network).  This would let me into safe mode without requiring activation immediately.  From there, I loaded service Pack2 of CD that allowed me to do the normal startup after that.

  With network option was the hang up for me.  It would allow me to work in safe mode without immediately activating the software.

  So I went to THIS problem.

  Rami thank you for your help.

• Why I can't get online in safe mode with networking? Does not start in normal mode.

  I can't get my computer starts in normal mode.  It starts only in safe mode.  I can choose the mode safe mode with networking so I can get online, but that's all... just safe mode.  Can I do to solve this problem?  I don't have a lot of money and a new computer is not an option at the present time.  Any help out there?  I have also no sound.  I tried to reinstall my windows xp, but it won't let me.  I have XP Pro and SP3.

  Hello splunk2011,

  Please contact the Microsoft Answers forum with this problem!

  After reading your post, my understanding of the issue is that you are unable to start in Normal Mode and as such, cannot be online within Mode safe mode with networking.

  Because we can start in Mode safe mode with networking, this tells us that a driver or a program from loading at startup may cause the problem.  To solve this, I would try a clean boot.

  More details about this is located at the following link:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Let us know if this helps solve your problem.

  Best regards

  Matthew_Ha

• URGENT HELP PLEASE! Windows did an automatic update finished & gave me the Option "restart now or later. I chose Now.A screen from Windows is going down, a startup problem occurred immediately after the installation of updates, this has happened about 9 h

  Windows has finished just do the automatic updates on my Sony Vaio... He said that he should be released on... When it restarted it goes to the ' start windows normally, safe mode, safe mode w/network, safe w/command prompt mode and the last known good configuration "screen... I tried "start windows normally", and last known good configuration, and no matter what I did, it looks like its about to begin, with the 'windows' logo & he says it's the boot process, but then instantly a screen flashes, but too fast for me to read what he says, so I immediately finished fashion splash screen choose again. Whenever I try to get my PC to boot it goes through this again. Exactly... I tried restarting, shutdown PC up to 30 min. waiting & more & again it does the same thing & will NOT start! HELP PLEASE!
  I do not have my current work & News & saved downloads & need help & I timed commitments to people... ASAP PLEASE!
  Thanking you in advance...

  Windows XP logon screen does not appear and the computer continuously restarts
  http://support.Microsoft.com/kb/310396

  Resources to solve startup problems in Windows XP
  http://support.Microsoft.com/kb/308041 TaurArian [MVP] 2005-2010 - Update Services

• How leaving the "safe" mode and return to 'Normal' Mode after changing?

  In Microsoft Vista, how to return to the normal mode to work in Mode safe?  I tried to leave by pressing F8 during the restart of the system.  I arrow down to the choice, but he always comes back in Mode safe.  (Story: I just got by technical problems after the installation of a wireless router.)  Everything now works in Safe Mode, but this mode is limited and I want to return to the Normal mode.  Help!

  I just found the answer by accident.  I went to the system configuration and on the 'general' tab, I changed the "Selective startup" selection in NORMAL STARTUP and it worked.  I hope this helps someone!

  KK