Docking station blocked bios NB

Similar Questions

• Lenovo L440 will not docking station during bios monitor display

  I have a Lenovo L440 portable dock with a think pad pro. The HARD drive is encrypted with TrueCrypt and needs a password before windows starts. The laptop will not display on the monitor attached to the dock before loading windows. I changed the bios Config setting > display > display device boot, as well as all the other options display, but it does make a difference. I tried with a VGA cable and a DVI cable, and no work. I tried with 2 different L440s and 2 docking stations with the same problem on both product. I used a laptop Lenovo L540 with success the same model of docking station. I also updated to the latest version of the bios.

  I wonder if I'm missing something or if simply, L440 model does not support this feature?

  The hotline of Lenovo was not able to help.

  The motherboard had to be replaced on the two L440s to fix this problem.

• Satellite click Pro P30W-2B - the docking station battery not charging

  Hello

  I have a Satellite click 2 Pro 30WB; at first, I didn't have any problem with this product, but a few months does not charge the battery of the docking station. I am able to load only the Tablet battery.

  Can someone help me?

  Thank you

  Hmm... If this problem has appeared since the first day of the purchase, the home question battery might be related to battery failure.
  In this case, you will need to contact the service to fix.

  But just one question: it's your BIOS up-to-date?
  Check the update in the station of service and if available new version of BIOS; try to update the BIOS to the latest status.

• HP ZBook 15 G3: BSOD when connecting to the HP Elite Thunderbolt 3 docking station

  I recently (yesterday, 16/08/16) began to experience the dreaded Blue Screen of Death, whenever my laptop is connected to my HP Elite Thunderbolt 3 Dock.

  The machine is a HP ZBook 15 G3. It was connected to the docking station for more than a month without this problem. I don't know why at the time because I don't remember any updates or new software before that happens.

  The dock is connected to 2 x monitors via HDMI cables and an ethernet cable. I connect a mouse and wireless keyboard to a USB3 port on the laptop.

  If the dock is connected to the laptop at the start, he reached the login screen front of BSOD. If I start without it connected, it will be BSOD a few seconds after connecting the dock. He never to the point where the monitors display anything. It can be started with the dock connected in Safe Mode, as it seems to disable job.

  I've updated all the drivers and BIOS (including download the Softpaq Download Manager), but there has been no change. I have also updated the NVIDIA drivers to the latest version without change.

  What should I do next to solve the problem?

  Did you analyze the dump files, they said?

  I would also like to update these:

  Intel's Thunderbolt sure Connect utility (15.3.40.275)
  Thunderbolt from Intel for the Dock Thunderbolt from HP (16.1.7.0.8) Firmware update
  ASMedia eXtensible Host Controller Driver (1.16.35.1)
  ASMedia ASM1042A Firmware Update for HP Thunderbolt 3 Dock (131025.10.11.23)

  More BIOS if you're not on 1.09 or 1.10, some people say that they have problems with 1.10, so maybe try downgrade to 1.09.

  You can also try experimenting with the 'Thunderbolt security level' setting in the bios security switching No. If it is authorized by the user, or vice versa.

• Compatibility issue with the Portege 7020 / display CT 7200 & docking station

  Hi guys,.

  I have some problems with 2 cell phones.

  1 is:
  I bought a 7020 used to replace the broken of 7200 screen. After having disassembled the screen, I noticed that the connectors have the same number of threads, but one of the terminal of the 7200's screen has more. 'no problem' I thought, and with patience I picked up the cable of the adapter of 7020 one put in the 7200.
  But when I turned it on I saw only the colored lines and squares: S: S
  If you want I can provide with the NP, if it would help... Even if I check the compatibility before ordering.

  2nd problem:
  Portege 7200 correctly recognize the docking station, while a few beeps before starting the 7020, and obviously it does not work with him. I checked on the toshiba site and the dock would be totally compatible!

  And for the end... Where can I find the bios updates?

  Sorry for my bad English, I hope someone could help me!

  Kind regards
  Francesco

  Hello Francesco

  You'll be really lucky if someone here can help you with these old models of laptops. I'm sure they have about 10 years.
  No manual maintenance and sufficient knowledge is not easy to help you with this replacement of the screen.

  This problem with docking station may be related to defective hardware. The two laptops are so similar, and two of them can be used with this docking station. How you can be sure that equipment is high on 7020?

  The BIOS updates are available on http://eu.computers.toshiba-europe.com/innovation/download_bios.jsp, but as I can see for Portege 7000 there is no updated BIOS, just to 7020.

  If you wish, you can contact the nearest Toshiba service provider. they have manuals for maintenance for this old notebooks and allow you to provide accurate information on the parts you need.

• Satellite click 2 Pro P30W - docking station has stoped working

  Hello

  Usually, I use my laptop as a tablet pc.
  Today, after conecting the tablet to the docking station, I saw that the keyboard and touch pad do not work.
  The strange thing is that the Toshiba Software see my dock as connected.
  I thought it was a low battery on the dock and I connected the laptop to be able to load but the power light on the keyboard is still off.

  Another problem is that the pc can t find the HARD drive.
  Can you help me please?

  Hello

  Description looks a little link between the Tablet and the docker of keyboard wouldn't work properly, but however the Toshiba Software recognizes the connected so docker I m a bit confused.

  I m also examines the issue with the HARD drive you said that the Tablet does not recognize the HARD drive which HARD disk you hear exactly: internal or external? Some tablets are equipped with a SOLID-STATE drive or HARD drive.

  I have an idea; on the left hand side, you will find that the strength of farm the hole. It s close the volume up/down toggle. This hole allows to force a shutdown when the computer is blocked.
  Insert a thin object in order to force the closure.

  By the way: the touchpad can be enabled and disabled by using the FN + F5 key combination.
  Check if the touchpad isn't disabled.

• Satellite Pro A120: Is it possible to use the docking station parallal port

  Is it possible to use a docking station usb with a parallel port on a satellite Pro A120, which has no parallel port.

  Therre is a BIOS setting, or is it not supported?

  Hello

  What USB docking station do you mean exactly?
  I found a camera and it seems that it s compatible with all satellite units.

  But please post one exactly USB docking station number.

• Portege R700 with docking station may not automatically switch to the external display

  Hello!

  In the past, we bought a lot of A600, R500, S10, and always a docking station for every laptop here at Desjardins, we bought.

  Now we have a little problem with the new R700 model: PT318C - 00G 001,
  We bought 30 of them.

  WHY when we put in the tie-down (with the nearby screen) it can display automatically to the external display no/switch? (in this case a 22inc LCD)
  It is connect with the HDMI/DVI cable. And when we get the display by sliding in the graph of intel and media panel (V 6.14.10.5258), after a reboot of the docking, the screen is all buzzy... sometimes both screen are dark, and we must use a combination of keys to move.
  It's really not easy to use for our users...

  With the old model as the A600 or S10, all have always worked well, if we are on the dock, the pop screen directly on the external LCD, so I stopped him, ondock it and start up of all is well on the screen of the laptop.

  We are on Windows XP Pro SP3.

  I tried the utility Toshiba display device change and expansion Mobile from Toshiba. are not clear...

  Thanks for your help.

  Have you installed a version of vanilla from Windows? Or XP has been installed from the Toshiba Recovery Disc?
  Maybe you are missing several key structural factors (common modules for example). Also make sure that you use the drivers to display on the Toshiba site.

  Also try a BIOS update (v1.70 is the last one I think).

• Still boring stuck 0.8 Ghz with docking station

  If I put my W520 in sleep mode, put in my docking station and run it, it is still stuck at 0, 8 GHz! Same throttlestop will not work!

  take it and on the dock during the race makes no difference. Oh well, there is a difference: as it is off the COAST of the docking on battery only, I can get full speed with turbo boost by judgment of the accelerator, but beware if I put it again on the docking station...

  the only thing I can do is to restart the laptop, then I get the message: the power of the AC adapter is too low compared to the system has been shipeed with (I HAVE the original PSU 170W on my docking station!), then it starts with TB works very well.

  These issues will never end, lenovo?

  What BIOS version and the version of the power manager that you have? If its not 1.30 and 3.62 try this combination and see if it helps. What CPU do you have? Docking station that?

• W530 and Mini Docking Station - monitor not displaying at boot time

  I have a W530 (2441A 53) and I just the mini docking station for it (433835U). We are using PGP Desktop, then when I start my laptop, it prompts me for a PGP password. The monitor does not display it for me at all. I have to go to the laptop, open it and enter the password (well, actually, I think I can probably get on the keyboard that I use with the monitor, but I don't see what is happening, and the docking station is in an uncomfortable situation). Once I get the password, and the machine gets more in the boot process, and then the screen finally shows what happens, and it's very well after this point (well, not exactly - it is not about taking advantage of the resolution of my screen - but I am not concerned about it right now).

  Is there a setting I should do in the BIOS, Control Panel, etc., so that the monitor can function during startup?

  In the BIOS, set the graphic display to the detection of Optimus discreet and set to 'disabled '.

• X 200 with ssd OCZ blue screens at the start of the docking station

  The 200 x blue screens when the startup of the docking station. If I take the laptop to the docking station to start and then once booted dock the laptop is fine.

  The issue started happening when you I upgraded the laptop form a SSD OCZ vertex 2 drive from xp to windows 7 and installed.

  I tried to update the firmware on the ssd using this utility

  http://support.Lenovo.com/en_US/detail.page?LegacyDocID=MIGR-69806

  The program showed that my ssd was running firmware version 1.29 and that he did not need to be updated.

  I also tried to update the x 200 to the latest version of the BIOS. Nothing seems to work.

  Any ideas or suggestions are greatly appreciated.

  Windows 7 does not start a compatibility. I solved the problem by returning to a mechanical drive.

• Map chart AMD 14 ZBook and docking station

  I have problems with a ZBook (AMD grahics version) 14 and an ultraslim docking station. HP two monitors are connected to the docking station with display ports.

  I can say that I have the latest BIOS, drivers and firmwares installed. I am running windows 7 64.

  When the graphics chip from AMD over-pants is used, the laptop hangs when it is inserted into the dock. No question arises when only Intel graphics are active.

  Everyone knows about similar problems? Any suggestions on how to installation graph?

  Kind regards

  Andreas

  The computer seems to be OK now. I installed new AMD drivers are available (14.301 Rev.W (March 18, 2015)).

  No problem with the docking station.

  No problems with AutoCAD.

• hp2710p video output docking station wa995aa displayport

  I would like to connect my old hp2710p to the TV via HDMI. If I connect the displayport of docking with a hdmi adapter, but it doesn't work.

  If I connect my hp2760p, everything goes.

  The 2710p has w7 32 bit, latest BIOS and drivers o.

  Could someone help me?

  Thanks in advance

  s

  It seems that the docking station you use with the unit is not supported by your laptop.

  The 2740 Ultra slim docking station supports only HP EliteBook 2740 and 2760p Tablet PC.

  The laptop supports the base of HP 2700 slim extension with 7mm DVD +/-RW SuperMulti Drive

  Docking Station Quickspecs:

  http://h18004.www1.HP.com/products/QuickSpecs/13639_div/13639_div.PDF

  Laptop Quickspecs:

  http://h18000.www1.HP.com/products/QuickSpecs/12718_na/12718_na.PDF

• Troubleshooting external video and thread unique docking station

  Try to group all threads dock into one video.  This will help me to collect information on what is and is not working there, and get it to engineering to solve.    I will edit this first post to maintain the all updated in one place.  This should make it easier to find information in the future.

  Steps to follow before reporting a problem:

  (1) check the revision on your dock.   If you look at the bottom of the docking station, you will see a variety of labels.   The PPID label is on the right side of the group labels and will include a number of review at the end.   Make sure you have a revision A01.   If you A00, and if the video does not work after trying the remaining steps in this guide, please contact support and have your A00 with A01 replaced.

  (2) be sure to update your device to the latest version of the BIOS (currently the A11 for the 713 x) and A07 for the 5130.  For the 713 x, select the version appropriate for your product.

  (3) upgrade to the latest version of the video driver.   It is currently for the 713 x 3496 and 3366 for the 5130 (note that this driver 5130 is packaged in A06 chipset driver).

  (4) connect your monitor (s) to the docking station.   The preferred method is to use directly DP to DP or HDMI to HDMI cables.   Dongles will work, but note that the DP dongles must be 'active '.   DP ++ (non-active) dongles will not work with this docking station.   Passive HDMI dongles are OK.   Use dongles and cables of good quality.   Monitors must be HDCP.

  (5) turn on monitors and set up an external video via the options of the Intel graphics driver or the WIndows Devices/project option.   The 5130 will support the LCD + external display a screen (two screens can reflect the content if you wish).  713 x will support the LCD + two external displays (each unique content display).  713 x will support daily chained DP 1.2 monitors.  Two external monitors can operate at FHD (1920) and one external monitor through DP can support 2560.

  (6) at this point, your external monitor should work.   If this is not a couple of additional troubleshooting follow the steps.

  6.1) remove and reinsert the cable from the monitor at dock.

  6.2) to ensure that the current dock is good (the LED on the front of the docking station must always be on when power is present)

  6.3) make this monitor has good source of selected entry and that the wiring is routed to the appropriate ports.

  6.4) compressed Undock and redock to see if a change occurs.

  6.5) 6.5) for tablets of 713 x, try to roll back the driver A00 video 3316 to see if that makes a difference.

  (7) if the video still does not work as you expect, please post in this topic with the following information.

  (7.1) the confirmation that you have tried the steps above and that you have indeed an A01 docking station.

  7.2) of the make and model of your monitor (s).

  7.3) information (e.g. How is everything connected) configuration

  7.4) If you use several dongles, brand and model of the dongle if known

  7.5) problem specific (s) you encounter.

  Pay attention to the updates to this thread that develops information.   I'll update below tables quite frequently - I need to dig up the test reports and add all this information here soon.

  List monitors confirmed the function:

  1907WPc (DVI)
  2007WFPb (DVI)
  2407WFP (DVI)
  E248WFPb (DVI).
  P2213 (DP, DVI)
  SP2208WFPt (DP/DVI)
  U2410 (DVI/HDMI/DP)
  U2413 (DP)
  U2711 (DVI/HDMI/DP)
  U3011

  List of monitors who may have questions:

  U2312 (DP to DP) - no video sync with 3412, seems to work with 3316.
  U2412M same as U2312
  ST2220L (HDMI to HDMI) - not detected after dock power removed/reinserted.   Workaround is to remove HDMI and power of dock, plug in power first and then HDMI.
  ST2340t (HDMI to HDMI with USB 3.0 touch) - Tablet believes monitor USB after the suspension/recovery

  Acer G246HL - DP flickers / picture does not fill the screen (with active ingredient DP dongle cable), another where monitor does not work.

  Dell E198FPf - DP flickers / picture does not fill the screen (with active ingredient DP dongle cable).

  NEC LCD17V-BK - DP flickers / picture does not fill the screen (with active ingredient DP dongle cable).

  ViewSonic VA702b - DP flickers / picture does not fill the screen (with active ingredient DP dongle cable).

  Acer AL1716 - DP flickers / picture does not fill the screen (with active ingredient DP dongle cable).

  E2209Wc - work via HDMI, but not through DP

  AOC E2450SWH - HDMI works fine, DP to HDMI (Astrotek AT-DPHDMI-MF Active) flashes.  DP to VGA (Comsol DP-VG-AD) flashes.   Persistence concerns.

  Dell P2314H - DP to DP - delay important, does not at all or its blinking.

  Dell P2314H - DP to DP - long delay for monitor DP to come after that HDMI works.   OK with monitor power off.

  E2209Wc - DP/DVI displayport topology looks but monitor will not work.

  Dell P2414H - DP only works 10% of the time

  Dell P2210 reference - DP only works 10% of the time

  Dell P2210f, 2210-t, 2210Hc - do not work DP to DP

  Dell E220Wf - won't work not DP/DVI

  Dell 2009Wt - won't work not DP/DVI

  Reference Dell 2213 - some work, some don't?

  Dell U2413 - no video via active DP HDMI adapter, works very well with the right RFP

  Dell 2414Hb & failure 2009Wt - DP to DP - Dell to detect again after cycle dock, only mirrors, extend.

  HP LA1951g - flicker when using VGA, OK with HDMI/DVI

  P2210f - OK with DP DP, problematic in the case.

  Dell U2412m - does not work with DP

  Dell S2240M - does not work with DP to DVI active

  P2314H - DP to DP fails to reconnect after sleep cycle

  List of dongles confirmed the function:

  Questions cable gold plated active DisplayPort to HDMI male/female adapter (tested on 7130)

  Questions cable gold plated active DisplayPort to DVI male/female adapter (tested on 7130)

  Bizlink Dual Link DP to DVI (out of stock at the moment)

  List of dongles confirmed having problems:

  Any DP ++ (passive) dongle - dock can't DP ++ (passive) DP dongles.

  Thank you!

  What do guys for the monitors to u2312 and u2412?

• Dell coming Pro 11 (7130) does not work with dock station (K10A) and mobile keyboard (K12A)

  Hello! There is a problem with my Dell place Pro 11. The Tablet does not work in conjunction with a docking station with a keyboard with battery docking station. The problem with the docking station, is only the work of power and audio connector. More is running, no ports (HDMI, USB, LAN). The problem with the keyboard, the touchpad and keyboard do not work. Once the battery is connected. Windows 8/1 Pro 64 bit is installed, the latest drivers and BIOS (A15). Without docking station and keyboard shelf works well. USB and HDMI ports on the tablet work well.

  What can I do?

  Thank you!

  Hello

  same problem here. Both my dock and travel keyboard no longer works. Only my dock workload but not USB, etc.

  I've updated my 7130 windows 10 with the latest bios drivers but no luck.

  Time for dell start with patches!

  Benny