Docking station no longer displays travel times

Similar Questions

• W530 and Mini Docking Station - monitor not displaying at boot time

  I have a W530 (2441A 53) and I just the mini docking station for it (433835U). We are using PGP Desktop, then when I start my laptop, it prompts me for a PGP password. The monitor does not display it for me at all. I have to go to the laptop, open it and enter the password (well, actually, I think I can probably get on the keyboard that I use with the monitor, but I don't see what is happening, and the docking station is in an uncomfortable situation). Once I get the password, and the machine gets more in the boot process, and then the screen finally shows what happens, and it's very well after this point (well, not exactly - it is not about taking advantage of the resolution of my screen - but I am not concerned about it right now).

  Is there a setting I should do in the BIOS, Control Panel, etc., so that the monitor can function during startup?

  In the BIOS, set the graphic display to the detection of Optimus discreet and set to 'disabled '.

• 3 displays with my HP ProBook 6470b 230W Advanced Docking Station

  Hi all

  I recently got a new HP ZR2440w monitor that I would like to joing my whole upward.

  Here is my current set up:

  HP ProBook 6470b 230W Advanced Docking Station + an HP L1950 monitor.

  My office is extended from the laptop to the Monitor HP L1950, giving double me poster.

  I would like to extend my desktop to the new monitor HP ZR2440w giving me 3 displays (laptop display + HP L1950 monitor HP ZR2440w monitor)

  For example, my question is: when I extend laptop to ZR2440w so that already granted to L1950 the ZR2440w does not connect.

  Note: I the ZR2440w connected to the docking via Display Port and speak it L1950 via DVI.

  I also tried both monitors on DVI.

  I tried the software graphics intel installed on my laptop but when the laptop lid is opened it will only connect to one of the external monitors.

  What I read I can only support 2 screens at the same time, but I feel like it rather kill to have so many display on the docking station ports and cannot use a while the laptop lid is open.

  Any help is greatly appericated.

  Thank you

  Steve.

  Yes, this was a limitation for awhile. The video controller in the laptop is the pull-out to the dock and it is capable of only configuration "dual head" If you get the screen of the laptop and the screen more.

• Libretto U100: Powers Docking Station is no longer in place

  Hi, I recently bought a U100 (finally updated my CT 100!). I have the reader Multi DVD docking station, which worked well at first, but now it is no longer lights up when I anchor my machine.

  The green light on the side of the eject button is still on, but that's all. I follow the instructions, no power, no son ties etc, but still nothing. The manual talks about turn on the drive icon on the taskbar optical media. I didn't do it and cannot find any mention of anywhere.

  Help, please!

  Hello

  On this path, it is not easy to say what is happening with your booklet. I put t know how is your personal configuration and if there is something on the device that has a negative impact on any type of functionality.

  If you said it was worked well I recommend you to retrieve the device with the recovery media.
  You are able to open the DVD - rom?

  Drive icon of optical media on the taskbar is probably the icon of CD/DVD Drive Acoustic silencer and it can make the drive quietly.

• Portege R700 with docking station may not automatically switch to the external display

  Hello!

  In the past, we bought a lot of A600, R500, S10, and always a docking station for every laptop here at Desjardins, we bought.

  Now we have a little problem with the new R700 model: PT318C - 00G 001,
  We bought 30 of them.

  WHY when we put in the tie-down (with the nearby screen) it can display automatically to the external display no/switch? (in this case a 22inc LCD)
  It is connect with the HDMI/DVI cable. And when we get the display by sliding in the graph of intel and media panel (V 6.14.10.5258), after a reboot of the docking, the screen is all buzzy... sometimes both screen are dark, and we must use a combination of keys to move.
  It's really not easy to use for our users...

  With the old model as the A600 or S10, all have always worked well, if we are on the dock, the pop screen directly on the external LCD, so I stopped him, ondock it and start up of all is well on the screen of the laptop.

  We are on Windows XP Pro SP3.

  I tried the utility Toshiba display device change and expansion Mobile from Toshiba. are not clear...

  Thanks for your help.

  Have you installed a version of vanilla from Windows? Or XP has been installed from the Toshiba Recovery Disc?
  Maybe you are missing several key structural factors (common modules for example). Also make sure that you use the drivers to display on the Toshiba site.

  Also try a BIOS update (v1.70 is the last one I think).

• Lenovo L440 will not docking station during bios monitor display

  I have a Lenovo L440 portable dock with a think pad pro. The HARD drive is encrypted with TrueCrypt and needs a password before windows starts. The laptop will not display on the monitor attached to the dock before loading windows. I changed the bios Config setting > display > display device boot, as well as all the other options display, but it does make a difference. I tried with a VGA cable and a DVI cable, and no work. I tried with 2 different L440s and 2 docking stations with the same problem on both product. I used a laptop Lenovo L540 with success the same model of docking station. I also updated to the latest version of the bios.

  I wonder if I'm missing something or if simply, L440 model does not support this feature?

  The hotline of Lenovo was not able to help.

  The motherboard had to be replaced on the two L440s to fix this problem.

• Docking Station T430, Graphic interfaces laptop and a usable station at the same time?

  Dear community,

  I have a Thinkpad T430 and I want to use two external monitors.

  The Thinkpad T430 has just a mini Displayport and I don't want to use the VGA port.

  So I thought to buy a docking station.

  But there are several of them.

  I just need an additional port display (Miini) or DVI.

  The question is: if I buy a docking station

  which provides a Mini Display Port addition or an additional DVI port that I am able to use one of the docking station and integrated laptop mini display port?

  Thanks for your help.

  Kind regards

  Marskuh

  Hi marskuh,

  You should be able to use both ports simultaneously.

  Let us know if this isn't the case.

• 2 docking stations connectable to laptop at the same time without crashing my Windows Vista Business?

  I am a 67-year-old educator specialized for 10 children with special needs.  Eelle have degrees of autism and require very individualized changes of their standardized curriculum class in public schools.  My laptop was purchased in 2007, and while she is an old lady like me, she is reliable, powerful and small enough horse for me to work on the fly... I just want to her top in order to exploit one of my docking stations or both at the same time...

  Gateway model C-5815 notebook convertible; touchscreen navigation or Penabled; Intel Centrino Core 2 Duo processor; U 7500 1.06 GHZ GHZ 1.07; 4 GB RAM 32-bit operating system. Windows Vista Business... AND ONLY 2 USB PORTS from where I work, 2 external hard drives, 2 printers; 2 scanners; 1 external TV/monitor, 1 keyboard, 1 ball control, external speakers and sinc various gps units, Ipods, cell phones, etc etc etc...  I did all this by the docking station to a generic port Targus 3 unit and an extension of USB Belkin 7port...

  UPDATE  Mahalo for anyone who has tried to help me with this question... I read everything that was recommended, but nothing has addressed this issue directly. In the end, I just bit the bullett and both plugged to my laptop... She has chewed on everything what adding new material for some time, but then she moved and purred... I even tried plugging and unplugging does material of a docking, and still she purred...  Mahalo to look at the problem (not) with me... Apparently the business Windows Vista is quite difficult to adapt to both stations and host at the same time...

  Hi Susan,.

  I can tell you to check out this link, I'm sure you'll find a useful link.

  https://www.google.com/#hl=en&output=search&sclient=psy-ab&q=how+can+i+connect+my+docking+station+to+Windows+ehow&oq=how+can+i+connect+my+docking+station+to+Windows+ehow&aq=f&aqi=&aql=&gs_l=hp.3...456.11746.0.12146.54.33.0.0.0.1.1361.9466.3-3j1j0j2j5.11.0...0.0.jVAoex9_uGc&pbx=1&bav=on.2,or.r_gc.r_pw.r_cp.r_qf.,cf.osb&fp=1ddfc57b13f7bd6e&biw=1249&bih=565

• Satellite click 2 Pro P30W - Docking Station for no longer work after Windows 10 Nig.

  Dear masters,

  Since 1 week I ve encountered problems using my Dockingstation
  Satellite click 2 Pro P30W

  After the latest updates of Windows docking station will be recognized only after disconnection of the Tablet, disconnect all devices connected to the docking station.
  That can attach the shelf unit, keyboard is recognized, that reach outside and power devices. Everything works.
  Power it is via the button is not possible when it is attached to the docking station.

  All this is happening after the recent Toshiba upgrades and updates of Windows 10 rises.

  I really need help to solve this problem.

  really good to see that there is no response from toshiba. I think that my company will never buy again toshiba products.

• Compatibility issue with the Portege 7020 / display CT 7200 & docking station

  Hi guys,.

  I have some problems with 2 cell phones.

  1 is:
  I bought a 7020 used to replace the broken of 7200 screen. After having disassembled the screen, I noticed that the connectors have the same number of threads, but one of the terminal of the 7200's screen has more. 'no problem' I thought, and with patience I picked up the cable of the adapter of 7020 one put in the 7200.
  But when I turned it on I saw only the colored lines and squares: S: S
  If you want I can provide with the NP, if it would help... Even if I check the compatibility before ordering.

  2nd problem:
  Portege 7200 correctly recognize the docking station, while a few beeps before starting the 7020, and obviously it does not work with him. I checked on the toshiba site and the dock would be totally compatible!

  And for the end... Where can I find the bios updates?

  Sorry for my bad English, I hope someone could help me!

  Kind regards
  Francesco

  Hello Francesco

  You'll be really lucky if someone here can help you with these old models of laptops. I'm sure they have about 10 years.
  No manual maintenance and sufficient knowledge is not easy to help you with this replacement of the screen.

  This problem with docking station may be related to defective hardware. The two laptops are so similar, and two of them can be used with this docking station. How you can be sure that equipment is high on 7020?

  The BIOS updates are available on http://eu.computers.toshiba-europe.com/innovation/download_bios.jsp, but as I can see for Portege 7000 there is no updated BIOS, just to 7020.

  If you wish, you can contact the nearest Toshiba service provider. they have manuals for maintenance for this old notebooks and allow you to provide accurate information on the parts you need.

• Tecra M9 - save the settings of display with docking station

  Hey there.

  I have a user who has a Tecra M9 on a docking station.
  There are 2 monitors connected to the docking station with VGA, the other with DVI. I use the Nvidia Control Panel and configure the screens and all is good in the world.
  That is until the user off the laptop, some work at home, then puts the laptop in.

  Therefore, only one monitor works, with the second out of action.
  I can go back and reset the configuration, but the user does not want that to happen every day.

  Any suggestions on how to get the laptop to save your setting as the case not docked or anchored?

  Thank you!

  > That is, until the user off the laptop, work at home, then puts the laptop in.
  Do you know what the user did in the past?
  To my knowledge there is not any special options that could save it. If you click on the button (apply) the changes are made and recorded.

• Portege M200 - weird display with docking station problem

  Hello

  I use a Portege M200 with MS Windows Vista and the Toshiba docking station. Whenever I connected the system closed down it will start with low light and different screen resolution. The brightness can then be adjusted in Vista.

  To solve the problem, I have to disconnect it, then put it in PC Mode and finally stop Vista. With the next offline boot, it works correctly and can be re-docked. Maybe it's just a lack of understanding of the system? It seems that with a rooted boot, nVidia somehow takes place or is there different profiles?

  Thank you!

  Alexander

  Hello

  At first, I must say that Portege M200 is old enough laptop model and I really wonder that Toshiba supports this model of laptop for Windows Vista. You are really lucky in this regard.

  In any case very important is info which edition of WXP Tablet Toshiba offered tools for/disconnect. If I remember well, it was utilitarian Toshiba Mobile Extension. Using this tool you has been able to use different settings for Bay service as well as for output screen to choose the correct resolution.

  Under Vista it is controlled by Vista and, AFAIK, Toshiba does not have any special utility for this. You must also understand that procedure/disconnect (power switching power supply) is controlled by Vista and I can imagine that under Vista it does not work perfectly.

  My opinion is that there is not much to do, but I hope I'm wrong on this issue. Let's see what else users of forum about this.

• Troubleshooting external video and thread unique docking station

  Try to group all threads dock into one video.  This will help me to collect information on what is and is not working there, and get it to engineering to solve.    I will edit this first post to maintain the all updated in one place.  This should make it easier to find information in the future.

  Steps to follow before reporting a problem:

  (1) check the revision on your dock.   If you look at the bottom of the docking station, you will see a variety of labels.   The PPID label is on the right side of the group labels and will include a number of review at the end.   Make sure you have a revision A01.   If you A00, and if the video does not work after trying the remaining steps in this guide, please contact support and have your A00 with A01 replaced.

  (2) be sure to update your device to the latest version of the BIOS (currently the A11 for the 713 x) and A07 for the 5130.  For the 713 x, select the version appropriate for your product.

  (3) upgrade to the latest version of the video driver.   It is currently for the 713 x 3496 and 3366 for the 5130 (note that this driver 5130 is packaged in A06 chipset driver).

  (4) connect your monitor (s) to the docking station.   The preferred method is to use directly DP to DP or HDMI to HDMI cables.   Dongles will work, but note that the DP dongles must be 'active '.   DP ++ (non-active) dongles will not work with this docking station.   Passive HDMI dongles are OK.   Use dongles and cables of good quality.   Monitors must be HDCP.

  (5) turn on monitors and set up an external video via the options of the Intel graphics driver or the WIndows Devices/project option.   The 5130 will support the LCD + external display a screen (two screens can reflect the content if you wish).  713 x will support the LCD + two external displays (each unique content display).  713 x will support daily chained DP 1.2 monitors.  Two external monitors can operate at FHD (1920) and one external monitor through DP can support 2560.

  (6) at this point, your external monitor should work.   If this is not a couple of additional troubleshooting follow the steps.

  6.1) remove and reinsert the cable from the monitor at dock.

  6.2) to ensure that the current dock is good (the LED on the front of the docking station must always be on when power is present)

  6.3) make this monitor has good source of selected entry and that the wiring is routed to the appropriate ports.

  6.4) compressed Undock and redock to see if a change occurs.

  6.5) 6.5) for tablets of 713 x, try to roll back the driver A00 video 3316 to see if that makes a difference.

  (7) if the video still does not work as you expect, please post in this topic with the following information.

  (7.1) the confirmation that you have tried the steps above and that you have indeed an A01 docking station.

  7.2) of the make and model of your monitor (s).

  7.3) information (e.g. How is everything connected) configuration

  7.4) If you use several dongles, brand and model of the dongle if known

  7.5) problem specific (s) you encounter.

  Pay attention to the updates to this thread that develops information.   I'll update below tables quite frequently - I need to dig up the test reports and add all this information here soon.

  List monitors confirmed the function:

  1907WPc (DVI)
  2007WFPb (DVI)
  2407WFP (DVI)
  E248WFPb (DVI).
  P2213 (DP, DVI)
  SP2208WFPt (DP/DVI)
  U2410 (DVI/HDMI/DP)
  U2413 (DP)
  U2711 (DVI/HDMI/DP)
  U3011

  List of monitors who may have questions:

  U2312 (DP to DP) - no video sync with 3412, seems to work with 3316.
  U2412M same as U2312
  ST2220L (HDMI to HDMI) - not detected after dock power removed/reinserted.   Workaround is to remove HDMI and power of dock, plug in power first and then HDMI.
  ST2340t (HDMI to HDMI with USB 3.0 touch) - Tablet believes monitor USB after the suspension/recovery

  Acer G246HL - DP flickers / picture does not fill the screen (with active ingredient DP dongle cable), another where monitor does not work.

  Dell E198FPf - DP flickers / picture does not fill the screen (with active ingredient DP dongle cable).

  NEC LCD17V-BK - DP flickers / picture does not fill the screen (with active ingredient DP dongle cable).

  ViewSonic VA702b - DP flickers / picture does not fill the screen (with active ingredient DP dongle cable).

  Acer AL1716 - DP flickers / picture does not fill the screen (with active ingredient DP dongle cable).

  E2209Wc - work via HDMI, but not through DP

  AOC E2450SWH - HDMI works fine, DP to HDMI (Astrotek AT-DPHDMI-MF Active) flashes.  DP to VGA (Comsol DP-VG-AD) flashes.   Persistence concerns.

  Dell P2314H - DP to DP - delay important, does not at all or its blinking.

  Dell P2314H - DP to DP - long delay for monitor DP to come after that HDMI works.   OK with monitor power off.

  E2209Wc - DP/DVI displayport topology looks but monitor will not work.

  Dell P2414H - DP only works 10% of the time

  Dell P2210 reference - DP only works 10% of the time

  Dell P2210f, 2210-t, 2210Hc - do not work DP to DP

  Dell E220Wf - won't work not DP/DVI

  Dell 2009Wt - won't work not DP/DVI

  Reference Dell 2213 - some work, some don't?

  Dell U2413 - no video via active DP HDMI adapter, works very well with the right RFP

  Dell 2414Hb & failure 2009Wt - DP to DP - Dell to detect again after cycle dock, only mirrors, extend.

  HP LA1951g - flicker when using VGA, OK with HDMI/DVI

  P2210f - OK with DP DP, problematic in the case.

  Dell U2412m - does not work with DP

  Dell S2240M - does not work with DP to DVI active

  P2314H - DP to DP fails to reconnect after sleep cycle

  List of dongles confirmed the function:

  Questions cable gold plated active DisplayPort to HDMI male/female adapter (tested on 7130)

  Questions cable gold plated active DisplayPort to DVI male/female adapter (tested on 7130)

  Bizlink Dual Link DP to DVI (out of stock at the moment)

  List of dongles confirmed having problems:

  Any DP ++ (passive) dongle - dock can't DP ++ (passive) DP dongles.

  Thank you!

  What do guys for the monitors to u2312 and u2412?

• Dell coming Pro 11 (7130) does not work with dock station (K10A) and mobile keyboard (K12A)

  Hello! There is a problem with my Dell place Pro 11. The Tablet does not work in conjunction with a docking station with a keyboard with battery docking station. The problem with the docking station, is only the work of power and audio connector. More is running, no ports (HDMI, USB, LAN). The problem with the keyboard, the touchpad and keyboard do not work. Once the battery is connected. Windows 8/1 Pro 64 bit is installed, the latest drivers and BIOS (A15). Without docking station and keyboard shelf works well. USB and HDMI ports on the tablet work well.

  What can I do?

  Thank you!

  Hello

  same problem here. Both my dock and travel keyboard no longer works. Only my dock workload but not USB, etc.

  I've updated my 7130 windows 10 with the latest bios drivers but no luck.

  Time for dell start with patches!

  Benny

• HP ZBook 15 G3: BSOD when connecting to the HP Elite Thunderbolt 3 docking station

  I recently (yesterday, 16/08/16) began to experience the dreaded Blue Screen of Death, whenever my laptop is connected to my HP Elite Thunderbolt 3 Dock.

  The machine is a HP ZBook 15 G3. It was connected to the docking station for more than a month without this problem. I don't know why at the time because I don't remember any updates or new software before that happens.

  The dock is connected to 2 x monitors via HDMI cables and an ethernet cable. I connect a mouse and wireless keyboard to a USB3 port on the laptop.

  If the dock is connected to the laptop at the start, he reached the login screen front of BSOD. If I start without it connected, it will be BSOD a few seconds after connecting the dock. He never to the point where the monitors display anything. It can be started with the dock connected in Safe Mode, as it seems to disable job.

  I've updated all the drivers and BIOS (including download the Softpaq Download Manager), but there has been no change. I have also updated the NVIDIA drivers to the latest version without change.

  What should I do next to solve the problem?

  Did you analyze the dump files, they said?

  I would also like to update these:

  Intel's Thunderbolt sure Connect utility (15.3.40.275)
  Thunderbolt from Intel for the Dock Thunderbolt from HP (16.1.7.0.8) Firmware update
  ASMedia eXtensible Host Controller Driver (1.16.35.1)
  ASMedia ASM1042A Firmware Update for HP Thunderbolt 3 Dock (131025.10.11.23)

  More BIOS if you're not on 1.09 or 1.10, some people say that they have problems with 1.10, so maybe try downgrade to 1.09.

  You can also try experimenting with the 'Thunderbolt security level' setting in the bios security switching No. If it is authorized by the user, or vice versa.