Docs never leave print queue

Similar Questions

• In the lexmark x 6100 printer queue never ends remove

  Original title: removal of the document in the printer queue

  document in the lexmark x 6100 printer queue never ends delete.  previously, I had this problem and turn off the printer and turn it back on the document was then deleted.  Now when I do this, the document is still in the queue and States that it is deleting, but never ends delete.

  Hi wwil,.

  1. you receive messages or error codes?

  2. you are using a network printer?

  You can check out the following link and try the steps suggested by R. Thompson Tuesday, April 29, 2008 03:03 and check if it helps.

  http://social.technet.Microsoft.com/forums/en-us/itprovistaprinting/thread/2d7f6282-3f20-43FF-A897-26db99585c1f/

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Blocked C4580. I can't remove the last print queue doc

  Wi - Fi works very well, analysis and test page works well. a single document is blocking the print queue. I tried to remove it again and again. It's a web page, I think. It says "delete", but nothing happens, it will not disappear. Any suggestions? I use Vista.

  Thank you very much. I tried, but it did not work. However, the document was gone the next morning so it worked - just need to sleep on it!

• 4508 ENVY: ENVY 4508 firefox launched the print job hangs in the print queue

  Hello

  We have a desire 4508 connected via wifi to a laptop 10 (x 64) Windows.

  We downloaded and installed the latest drivers available on HP and printers generally LibreOffice, WordPad or Firefox (normal web pages).

  But there is a situation when printing fails and we do not know why: If we try to print accounting information for the bank account, the print job is displayed in the windows printer queue but it stucks and blocks the other print jobs. The only way to get the printer to work is once again the restarting the printer spool service and removal of the print job in the queue (which sounds easier than it is actually...).

  We already ran this 'Doctor Print' application provided by HP, but it helps not at all.

  Is this a known issue?

  Is it related to the driver or more likely a problem of the web page in question / feel?

  How can I get more information about what exactly is going wrong?

  Thanks in advance.

  Hi @pderichs,

  Thank you for showing interest in the Forums of HP Support!

  I noticed that you have problems printing to a bank statement of printing in Firefox. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  This looks like a problem with the site, the plug-in or the browser.

  Try to print from other browsers such as Internet Explorer, FireFox or Google Chrome.

  • What were the results?

  If the problem persists, I recommend you to reset your internet browser settings.

  Reset the settings of your Internet Explorer browser

  1. Close all Internet Explorer Windows or Explorer Windows that are currently open.

  2. Open Internet Explorer by clicking on the button start . In the search box, type Internet Explorer, and then in the list of results, click Internet Explorer.

  3. Click Tools and then click Internet Options.

  4. Click on the Advanced tab, and then click Reset.

  5. Select the check box delete personal settings if you want to delete the browsing history, search providers, accelerators, home pages, and InPrivate filtering data.

  6. In the reset Internet Explorer settings dialog, click Reset.

  7. When Internet Explorer finishes restoring the settings, click Close, and then click OK.

  8. Close Internet Explorer.

  Source

  Reset the settings of your Firefox browser

  1. Type of topic: config in the address bar and press ENTER. A list of preferences.
  2. Find the print.print_printer preference (Note: this preference is missing in Firefox profiles where you have never used the printer.)
  3. Right-click (context-click) this preference and select reset. (Some users may have to reset all the preferences of print.printer for a particular printer, if this master preference reset does not solve the problem.)
  4. Restart Firefox and see if the problem is resolved.

  Source

  Reset your Google Chrome browser settings

  1. In the upper right corner of the browser window, click on the menu of the Chrome Chrome
  2. Select settings.
  3. At the bottom, click Show advanced settings.
  4. Under the section "Reset settings", click on reset.
  5. In the dialog box that appears, click Reset.

  Source

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• HP 5530: HP 5530 won't delete print queue after printing

  5530 HP printer prints a work, but will leave the job in the printer queue.  It will not print another job, until it is removed from the queue manually.  How can I get the job to remove from the queue automatically once it is printed?

  Hello @G556,

  Welcome to the Forums of HP Support!
  
  I understand that you are experiencing print queue problems when you print to your HP ENVY 5530 e-all-in-one printer from your Windows 7 computer. I would like to help you to solve this problem today.

  Now, this question can go down to a conflict between your printer and computer driver or a problem on your computer Windows print spooler. The print spooler is the printing system built into Windows operating systems. It controls the printing for sending to printers. If there is a problem with the print spooler, you may notice different conflicts of impression.

  To begin, please can I you click here to run the Microsoft Fix it Tool. Once the site opens, under (2) select "Print, fax, scan, share and save. Then, under (3) select 'diagnose and automatically fix problems printing and printer'.  Select run now. Once you have downloaded the tool, please follow the instructions on the screen to run the FixIt tool. If there is no print or print spooler system issues this Microsoft Tool should fix it for you.

  If the problem persists, please can I you click here to download HP Print and scan of the doctor tool. This tool will be "difficult to print" questions for you. Any connection or software driver conflict must be detectable as printing HP and the doctor analysis tool will attempt to resolve these conflicts for you.

  Please reply to this message with the result of your troubleshooting. I look forward to hear from you!

• HP Deskjet Ink Advantage 4615: Printer is deleted when delete print queue of the printer in Win8.1

  I right click the "Delete the print queue" option in "devices and printers". Who deleted the default printer and also removed the icon of the printer. The system then made the fax printer HP 4610 series the default printer. I re - install from the web HP printer drivers, but the HP 4615 icon does not appear with the other printing devices in "devices and printers". In each application, I need to select the HP4615 now that the printer before I can print. If I click on "Add a device" or "add a printer", the HP 4615 is not picked up. If I select "printer queue", then it shows the HP series fax and printer HP4615. How can I get the system to display the HP 4615 icon so that I can make my default printer?

  @Pietcar,

  I hope you're well and welcome to the community of HP

  I read on how you had removed the icon of the printer Deskjet Ink Advantage 4615 of devices and printers and since then have tried to reinstall the printer, which does not have the icon back to the printers and devices section, leaving you to not be able to select the 4615 as default printer.

  Here are my suggestions, starting with:

  1. run the print and scan the doctor. This diagnostic tool will check for all conflicts that may be causing the problem. The tool will show you a report at the end. If there is a problem that the tool could not fix, you will notice it in the results. Let me know what the results detected please. (Select difficulty printing when you run the PSDr)

  2. run the HP printer install Windows Wizard to find and install the driver "Full Feature" printers and software and go through the installation to see if there are errors or if the installation fails at any point.

  Check the devices and printers again to see if the printer icon appears. Also try to restart the PC to see if that helps.

  Please keep me informed of the result!

  If one of my suggestions, helped to reach a solution, I ask you to click on the button "Accept as Solution" please and thank you! If you want to send me a 'thanks' for my answer to help today, click on the thumbnails below.

  

• Documents in the print queue will not cancel or print

  I tried all the usual cancel, delete, turn off the PC, turn the printer off, turn them both off the coast of all etc.

  Do or not.  There is no test.

  These directions will not work with Windows XP, but it's the right idea.

  She also leaves a file .cmd lingering somewhere on your system.

  I propose the following technique that works for all versions of Windows and will not let any .cmd persistent or other files on your system:

  First to clear the print queue, you have to stop the print spooler service, and then remove all the jobs/print files pending.
      
  You cannot delete all print jobs in queue so that the Print Spooler Service is running, so you have to stop first.
          
  To stop the Print Spooler Service, click Start, run and enter in the box:
          
  services.msc
          
  Click OK to open the Services Applet.
          
  Locate the Print Spooler Service, right click and choose 'Properties' and then click on the "Stop" button to stop the Print Spooler Service is running.
      
  The option "Startup Type" of Service properties print spooler is usually set to "Automatic" (which is now a good time to check it out).
      
  If the "Startup type" is not set to "Automatic", set the "Startup Type" field to "Automatic" If that is your desire (which now is the time to check it out).

  Do not try to start or restart the Print Spooler Service again...
      
  Next. remove all updates pending upward and forward to printing from XP.  If they do not print before, you will need to send them to the printer again once things are cleaned in service yet.
      
  Using Windows Explorer, navigate to the following folder (assuming that Windows is installed on your C drive):
      
  C:\WINDOWS\system32\spool\PRINTERS
          
  Delete all the print jobs in queue (select and delete all the files) in the folder if the folder is without waiting for print jobs.  The folder must be empty when you are finished.
          
  Reboot your system and check the Print Spooler Service again to make sure the Print Spooler Service restarts automatically restart (given that the startup type is set to automatic).
      
  After the reboot, check again the spooler service for printing and the 'Status' column for the print spooler must be read "started."

  Submit new failure of print jobs.

• Cannot delete the print queue.

  having trouble getting the print job to leave the queue.  MSG is "suppression".  Went through all the steps from this point up to 'FIX IT'.  Help, please

  Problem with printing, you can also consider that run these tools:

  http://support.Microsoft.com/mats/printing_problems/

  It will automatically fix it.

• Print queues

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  • I have documents aligned to the top for a printer, but I want to print them on another.  How can I move documents to another printer queue?

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  If you want to change the printer to wait you change your default printer.

  Here's a ride on how to configure your default printer:

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-your-default-printer

  Of course, you will need to have this second printer installed and with a functional driver. I guess that you don't mention the printer that it is installed and compatible with Vista. If this is the case, simply change the default value for this printer and you're good to go. Hope this helps,

  Steve <> Microsoft Partner

• A print job in the print queue prevents the other printing printing-officejet 6500 a

  whenever I click on print I get the message print job in the print queue prevents the other printing - print

  then my printer goes offline

  I tried to re add the printer

  I tried to remove and re loading software

  I tried closing down and the fact unplugging pc and printer

  I tried the system restore

  I tried the hp scan print doc - did not help

  I tried to reset the spooler

  I tried deleating all print jobs

  I tried letting windows find my printer - it doesnot find him

  Help

  Hi katt6,

  I read your message which indicates that you receive a message "is a print job in the print queue prevents other printing of print." Please provide the detailed steps that you have already tried. I can help you.

  Try and print a self-test on the printer hardware to see if it is a hardware or software problem.

  Printing a Network Setup Page.

  Run the difficulty it Microsoft tool to see if this will help.

  Diagnose and automatically fix problems printing and printer.

  If the problem persists, continue with the steps below:

  I have provided a document of empty folder of spooling print to see if she will help solve this problem.

  How to clear the current queue in Windows Vista & Windows 7.

  Try to print again.

  Printer is on a network as follows:

  If you still have problems, and that the printer is on the network, check the Configuration Page to see if you have a valid IP address.

  If you have a valid IP address for the printer, then try and access the Web built-in to the printer server.
  Type the IP address in the address bar of your web browser. (Internet Explorer)

  Check the IP address on the computer to verify that it matches the IP address of the printer.
  Go to start, devices and printers, right click on the printer, go to the properties of the printer, some ports tab, click on configure port.
  If they don't match then close the Configure Port window and click on create a port and follow the instructions in the wizard.

• HP 7520 all in a print queue

  A month ago, I bought a new 7520, then broke a piece hurrying to fix a paper jam in the middle of printing several important documents.  No problem, back to Best Buy with protection plan and is back with a new, identical machine.  Now, I can't print in the menu print 7520 former for the new machine.  Some documents are not recoverable, but my lap top still has the queue. with the 7520 returned listed as offline.  Can I do the new EEG 7520 other 7520 docs print queue?   Any ideas? My devices and printer screen displays both 7520 7520 (1 copy).  Is there someone I can call - tried to find the ad line right number was sent to the various downloads.  Thank you very much.

  What operating system? You can find out which port was using the 'old' printer and change to the "new" printer port  In Windows 7, for example you go to start devices and printers, right-click on the new printer Ports, printer properties and find the port that the printer uses.  Now, do the same for the old printer - do a right click on the Printer Ports, printer properties and choose the same port used in the new printer, apply.

• view in Mac print queue

  C4280 all-in-One used on a Mac 10.7.3

  I can't view the print queue. The printer never appeared in Manager devices, only the scanner and copier. No problem with them, but I would like to see the printer. I found the location of the print queue in the system preferences, but when I click Open print queue, nothing happens. I know that there is a long queue because when I try to print something, I get an old document instead.

  I just want to remove the queue and know how quickly any time, it is needed. HP sells a lot of ink for me to print the things I don't want!

  Thanks for your help.

  Reset the printing system:

  -Go to System Preferences > print & Scan
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and then beside the dropdown 'Use', select the model of the printer (not AirPrint). Wait for the 'Add' button becomes available. Until it clicks.

• Documents stuck in print queue! P1006 Laser

  Tried EVERYTHING... reinstall the software, drivers, change the cartridges, rebooted, etc... All my documents, including the "test page" to go in the print queue, but does not print. NEVER! Using Windows7 64 bit. The printer worked fine for months. It was only recently. And Yes, I ensure that the PAUSE button was not on and the printer is NOT in offline mode. I can clear the queue and try again, but same result. Help!

  Thank you

  Bob

  Thanks for all help, but I solved this problem on my own. Note that many of you can run on the same subject (s). This may work for other issues as well. Sometimes I had some corrupted system files in this case affecting my printer or the printer spool. To know if you have corrupted files, follow these steps:

  Open a command prompt (START > RUN > then type "cmd")

  This will bring up the back window of dialogue.

  If you're not already in the drive C (or anywhere where the OS), type "cd c: /"(without the quotes). " Now you should have the cursor flashing after just the c: /.

  Now, type in (once again without the quotes), ' sfc/scannow' (space after sfc).

  It will analyze your entire system of corrupted system files and replace them with the correct file. This will take a few minutes to complete.

  When finished, restart your computer and try again.

  Good luck.

• Selecting bluetooth watch never leaves sd in walking mode, but look is connected to the phone 6

  Watch isn't providing directions of speech when using map App.  Just text with the vibration appears.

  When you select bluetooth on the watch, he never leaves the research, but the watch is connected to the iPhone 6.

  < published by host >

  JM Bell wrote:

  Watch isn't providing directions of speech when using map App.  Just text with the vibration appears.

  Hello

  Apple Watch does not spoken directions. He uses instead of taps to advise you when to turn.

  More information:

  https://help.Apple.com/watch/#/apdea7480950

  JM Bell wrote:

  When you select bluetooth on the watch, he never leaves the research, but the watch is connected to the iPhone 6.

  This is the correct behavior.

  To check if your watch is connected to your iPhone via Bluetooth, do not go to the home screen > settings > Bluetooth on your watch. This is how to tell the watch to find and pair with other Bluetooth (e.g. headphones) devices. It is normal for the iPhone not matched to being listed there and for the display of report "research."

  Instead, go to the glance of parameters:

  • When you view the time on your watch dial, slide up from the bottom edge of the screen, then swipe left / right until you find the glance of parameters. This will specify connected or disconnected:
    • Connected and a symbol of green phone in the upper right shows that the watch is connected to your iPhone via Bluetooth.
    • Connected and a green cloud symbol indicates that your watch is disconnected from your iPhone via Bluetooth, but rather connected (as a backup) to a known Wi - Fi network.
    • Disconnected shows that your watch is disconnected from your iPhone and is not connected to a Wi - Fi network. The symbol in the upper right corner will be a red telephone with a line through it. The same symbol will also see the top of the watch face.
  • Slide down again to return to the watch face.

• Failed to delete document of network print queue.

  We print to a HP LaserJet 5 using Windows XP.  2 positions are hanging in the print queue. Tried to remove Control Panel command several times and it shows just "deleting - printed" and "removal - print" in the State.  They have been here since yesterday, and we can not print around them. When I try to delete from the printer itself, it shows no jobs in the queue. I saw another post on the forum on this topic who advised to go to the print spooler, which I did, but then couldn't run the second half of the suggestion to go to the print jobs.  It is a network printer.  Any help would be greatly appreciated.

  Thank you!   The problem was that I had to go to the file server to perform this function - my brain wasn't getting this fact.  It worked - thank you very much for your help.