Document does not print, but directly goes thru and then I get the message in paper.

Similar Questions

• I bought Illustrator on my iMac and downloaded and then I get the message that my trial version has expired and I have to buy Illustrator! But I just bought! So I deleted all the files Adobe from my computer and tried to download

  (1) I've deleted all my my IMAC Adobe trial versions

  (2) I bought HAVE

  (3) I downloaded, but I get the message that my AI trial version has expired and that I should buy I

  (4) but I already bought and paid for the one application I

  (5) what should I do now?

  Sorry, I just found that I needed only to open a session with the correct Adobe account. Problem solved.

• Highlighted in the documents does not print.

  My HP309g works fine except the underscore in the documents does not print.  I use Word 2010 and Word Perfect X 4.  My OS is Windows 7 64 bit.

  Hello Pamelia

  Which application use? Have you tried to use Wordpad or another application with highlights?

• Convert to PDF from word, the fonts are not included, the word doc record embedded fonts, but conversion does not incorporate fonts?  What should I do to get the embedded fonts?

  Convert to PDF from word, the fonts are not included, the word doc record embedded fonts, but conversion does not incorporate fonts?  What should I do to get the embedded fonts?

  I used times new roman in word 2013.  New file.  Apparently the version of adobe that I use will not incorporate.  I use the version line.  I was told that I have to upgrade to Adobe Pro.  I'm dealing with a patent application, so I can't share the document.  The patent office cannot accept that documents with embedded fonts.  My drawings that have been scanned and then converted are a problem too because I get an error based on the size of the page (23.6 "x 32.4") and I am unable to reduce this size in files from Adobe.com.

  Unfortunately I signed up for this product that get these two converted documents and uploaded only to discover that the conversions will not download.

• Windows Media Center does not work on both my XP and Vista computer. The two events lastnight

  Windows Media Center does not work on both my XP and Vista computer. The two events lastnight

  Hello

  For someone to really help him, it is important to give as much information as possible.

  You say "my computer XP and Vista" are this one computer dual boot with XP and Vista, or is - the two computers 'single '?

  If it happened "yesterday" did you updated anything or whatever installed?

  Having only happened yesterday have you tried a "System Restore" to see if this corrects the problem?

  What TV card are you using and have you verified that this works correctly?

  If you get not a photo is the antenna in place properly?

  Do you get any error messages? More information, you can provide more someone will be able to help John Barnett MVP: Associate Expert Windows XP: Windows Desktop Experience: Web: http://www.winuser.co.uk ; Web: http://xphelpandsupport.mvps.org ; Web: http://vistasupport.mvps.org ;

• I have and try to reinstall Photoshop CS5.1 on a Macbook Pro running El Capitan (OS10.11.2). I downloaded DesignStandard_CS5_LS1.dmg but when I double-click installation I get the message 'Install' is corrupted and cannot be opened. You must eject the dis

  I have and try to reinstall Photoshop CS5.1 on a Macbook Pro running El Capitan (OS10.11.2). I downloaded DesignStandard_CS5_LS1.dmg but when I double-click installation I get the message "'Install' is corrupted and cannot be opened. You must eject the disk image. "Someone knows what's going on? I tried to download with Safari and Firefox, but the same thing happens.

  This information is a MUST to install old programs on Mac El Capitan

  -You can't get the same error message, but these two links will help with older programs

  Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)

  -also a TEMPORARY security change https://forums.adobe.com/thread/2039319

  FAQ on the Mac 10-11 https://forums.adobe.com/thread/1979303

• When I launch the new photo or the new HDR feature fusion device, they start for about 10 seconds, but then I get the message error "an unknown error has occurred."  What should I do?

  When I launch the new photo or the new HDR feature fusion device, they start for about 10 seconds, but then I get the message error "an unknown error has occurred."  What should I do?

  There is a problem with these models of Leica cameras providing accurate information in the EXIF data F stop. Photomerge for HDR and Panorama will use this information to "mix" the image files. A solution has been found using an EXIF here Editor:

  Re: LR/ACR Pano merger combining Glitch

  This may or may not be the source of your problem, but worth investigating. Try to use any other device non-Leica and do a quick test Panorama or HDR and see if you get the same message.

• Why am I not able to choose a wireless network? I get the message "windows cannot configure this wireless connection".

  Why am I not able to choose a wireless network. I get the message "windows cannot configure this wireless connection".

  When I go to network connections it shows: Wireless network Connection - connected, Shared Dell Wireless 1397 WLAN Mini - Card & connection 1394 - 1394 connected Net Adapter.

  How can I solve this problem.

  original title: 1394 connection?

  Hi ToddHenderson,

  You did changes to the computer before the show?

  Method 1
  I suggest you try the following steps:

  The error message can mean that your hardware manufacturer has provided you with its own software to wireless as an alternative configuration to Windows Wireless Auto-Configuration service.

  I suggest you follow the steps below.

  
  Use Windows to configure wireless settings
  a. go to the start menu, then select run
  b. type ncpa.cpl, and then click OK to open the menu of the network connections
  c. Select your Wi - Fi connection service and choose the option change settings of this connection.
  d. go to the wireless networks tab and check use Windows to configure my wireless network

  
  Launch Windows Zero Configuration
  e. return to the start menu and select run
  f. type % SystemRoot%\system32\services.msc/s, and then click OK
  g. double-click the Wireless Auto Configuration option
  h., go to the startup type list, and then click Automatic. Click on apply to confirm the changes
  i. Accordingly, click Start in the Service status section click OK to apply the changes.

  Method 2
  Try the steps from the following link:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• HP Officejet Pro 8620 does not print, but the document is sent to the printer without error

  I bought a HP Officejet Pro 8620 and connect 2 computers via a wireless connection with the latest driver.
  In the first computer (windows 7) I can print without any problem
  On the second one (windows 8), when I try to print, I can see in the windows printer spooler file that I'm going to print. The file is sent to the printer, without error, BUT nothing happens.
  I already tried reinstalling the drivers, restart the computer, the printer. I tried to connect to a wired network. It still does not. It's very weird but I got no error, just does not print. I thought that the printer does not work, but on the second computer I can print.
  Thank you for your advice

  Hello

  Please download and run the HP print and Scan Doctor www.hp.com/go/tools

• HP 6500 quickbooks ck does not print but plain paper is ok

  My 6500 worked properly and had printed one of the two controls when he stopped a given error code paper mismatch.  I checked the configuration and everything seemed OK. He even printed the correct audit on paper, but whenever I inserted the controls, he gave the same shift code and does not print. This are not the new controls and after the update to quickbook pro 2013 all printed fine for a week.

  Hey jcort,

  There are things you can try in this case.  I assume that you are using a Windows PC, is this correct?

  If so, then open the printers or printers and faxes for older versions of Windows and devices page.

  • Right-click on the printer
  • Select the printer properties
  • At the top of the general tab: change the name of the long name just HP 6500 printer and click on apply

  I've seen some strange problems with Quickbooks in the past when a printer name is too long.  Can not solve the problem, it is a good step in a first time for questions of Quickbooks.

  So, I saw people having some success in defining quality in project mode, when you attempt to print checks from this software suite.  Print in draft mode can disable paper sensors that generate paper mismatch error.  The check is printed if you set the draft mode?

• HP 3520 while a printer does not print black after changing ink and cleaning head

  My 3520 printer all-in-one will not print black after cleaning print head and replacement of black ink. the printer is a little older than a year. All printing inks.

  Hi handytim1,

  Welcome to the Forums of HP Support! I see that you are facing some print quality problems on your HP Deskjet 3520, you cleaned the printhead and replace the cartridge without success.

  I would like to continue you here: printer does not print black ink or color of ink or prints blank Pages, I understand, you may have made some of these steps already but I need you to complete all the steps in order to solve the problem of the missing black, you encounter.

  Please note: there are three stages of print head cleaning. Three steps if necessary. If the print head is badly clogged, it may require another round of cleaning. If so, wait 30 minutes after the last step of cleaning (third) to start the first stage of the cleanup process.

  Let me know the results, I'll watch for your reply.

  Thank you

• my printer does not, print says no driver found and implemented to update spooler.

  Original title: all of a sudden my printer does not print says no driver found, went to the website of downloaded lexmark driver but still does not print. conjecture.

  I try to print, but it seems that the computer and the printer are not on the same page.
  This just started about 4 days ago.
  Spooler has something to do with it, I got a pop for updating the spooler or not and not clicked by chance do not know how to find it so I can update.
  Not really in all the tech stuff, any help would be grateful.

  Hello

  Do you remember the full error message with spooler?

   

  Method 1: Run the following fix - it:

  Diagnose and automatically fix problems printing and printer:

  http://support.Microsoft.com/mats/printing_problems/

   

  Method 2: See the following article:

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

   

  Method 3: As it happened four days before, restoring the computer to a date where it worked fine before.

   

  System Restore: frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

• Apps print does not print with eStation C510a. Draws thin line at the top of the page.

  My C510a eStation printer does not print using printing applications.  Only, it prints a thin line at the top of page.  Everything works fine until I feel.

  All other functions seem to work.  It prints computer via WiFi.  It prints when I send an email to it.  It copies via the Zeen.  It does not print using printing applications.

  Does anyone else have this problem?  What is the solution?

  2010-12-23 15:00.  I just got got off the phone with a HP engineer.  She said that the station is still in TESTING phase and to call to report problems, allowing them to improve the product.  (I thought that the product would have been fully tested before being released to the public!)

  She had me reset the zineb display by pressing the volume keys during power on.  This erases everything that had been done on the Zeen by me and gave rise to no HOME screens, which will need to be implemented by me.  The only application at the bottom of the blank home page was Yahoo!.  The app of the printer was still missing.  I had to move the tray app home page.  Now, I have to spend hours, once again, setting up the Zeen.

  After the reset, the printer apps seem to work now.  The Zeen will copy by using the application of the printer.  My computer seems to still be able to print and scan to/from the station.

  The printer station eStation C510a and zineb display are very exciting.  However, they are not for someone do not want to spend the time necessary so that it can work properly.  If you have a cell phone, be prepared to use a lot of minutes while on the support.

  The HP engineer said that soon will be a new version of Android on the Zeen enabling it to be faster.

  Note: I've updated the original post with new information.

• Dell Photo AIO 962 Printer does not print. Running a Dell Dimension 8400 CPU, with the Windows XP platform.

  Problem with printer does not print.

  I tried to uninstall and reinstall the printer drivers; Did not work.  Tried to start your Virtual Tech; He said that he could not solve the problem; and to communicate with you, dear friends!  I need help... I don't know what else to try.  Eddir

  I also need to recover the files of the program: dlbxcnv4.dll; dlbxmon.exe; and dlbxaix.exe.  because of the "runtime error".

   

  Hi eddir,.

  I suggest to reinstall the Dell printing software to see if the problem is resolved.

  Which should reinstall the DLL files you are looking for as well.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Trying to turn on network sharing and discovery, I get the message 'the specified service does not exist as an installed service' I am running AVG internet security 2013

  When I try to change the networking of sharing and discovery, I get the above message.  I don't quite know what to try to fix the problem. Any thoughts would be helpful. Thanks in advance.

  Hello MarkPogue,

  Thank you for the question!

  I'm sorry to know that have problems you with the network sharing and discovery. "As I understand it, you get an error message" the specified service does not exist as an installed service ' trying to turn on network discovery.

  Make the SFC (System File Checker) scan and see if the problem occurs.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Answer to us if you are having problems with the network discovery or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.