Documentation for the AUTHN_FAIL reason codes?

Similar Questions

• Get the error code 0 x 80070070, "a snapshot cannot be created for the following reason. There is not enough space on the disk

  Original title: I get a "not enough space on the disk for the snapshot" msg... whart is a "cliché" how much space do I need? 1. on the drive, I'm backup? 2. the disk I'm backup to?
  I can't do a backup. the msg I get is:
  "Cannot create a shadow copy for the following reason."
  "There is not enough space on the disk (08 x 80070070).
  that is exactly a "cliché"?
  How much space do I need?
  1. on the drive, I'm backup?
  (I have 3,41 GB free on 224gigs)
  2. the disk I'm backup to?
  (I have 636 concerts!)
  Thanks for any clarification you can give,
  justFranc

  Hello

   
  
  1. what operating system is installed on the computer?
  2. you have any third-party backup software installed on the computer?
  
  Start the shadow copy volume service and see if the problem persists.
  a: click Start > run
  b: type Services.msc in the start search box and click on enter.
  c: Are now looking for a shadow copy volumeservice, double-click it to open it.
  d: make sure that the Service is started and set to Automatic.
  
  Shadow copy is a technology included in Microsoft Windows that allows taking manual or automatic backup copies or snapshots of data, even if it has a lock on a volume that is specific to a precise moment in time on regular intervals.
  There should be more space on the backup destination media to take successfully no matter what data should be backed up from the source backup media.
  
  Hope this information helps.

• HP Photosmart 3110 referred to the documentation for the printer. Error 0xe18a001

  HP Photosmart 3110 referred to the documentation for the printer. Error 0xe18a001

  Hello caromuna,

  It seems that other users have found a way to completely reset the printer back to the default settings, which can help with this question.

  The reset is discussed in this forum thread and seems to be a bit difficult to fill. Let me know if it helps to solve your problem.

  Photosmart 3310 ink system failure

• Unable to create restore point. Vista64. Could not create the scheduled task for the following reason: cannot create a file when that file already exists

  RAID 5 obtained corrupte had to rebuild after that can't create system restore point. Tried everything sfc, fsutil, Dungeon SystemPropertiesProtection screen displaying this error: "could not create the scheduled task for the following reason: cannot create a file when that file already exists." (0x800700B7)"system of work in all other respects. SFC says it found and fixed errors every time I run it.

  Fix tried Della Li: Please remove the WindowsBackup folder in the HKEY_LOCAL_MACHINE NT\CurrentVersion\Schedule\TaskCache\Tree\Microsoft\Windows.

  Delete the WINDOWS BACKUP folder. Unfortunately this folder does not exist.

  Checked VSS, Taskscheduler and other services are runnig

  Tried to boot from the CD and widowed revover. Says no problems. The error to any manulation of the checkbox in the properties of the system, the system protection screen

  Solved

  It turns out that task scheduler got corrupted it have several tasks Scheduler said were not available, but are still in the working directory. These tasks especially SR from compensation directory solved the problem and I can now create backup points.

• Windows is not able to load the selected for the following reason of backup set

  Hello;
   
  I did run a daily backup to a computer in a network with windows backup and Restore Center. the hard drive crashed on this computer and we had to install another. When I try and use advanced restore / backup made on a different computer, I can navigate to the backup on the network computer folder but when I select the folder and click Next it gives me an error:
   
  I get: Windows is not able to load the backup game selected for the following reason:

  There is a problem with the backup catalog... 0x810000E5... restore from a different place...

  Just to add additional information; The computer with the replaced hard drive running Vista family premium, the path to the backup file is \\HPDESKTOP\Public\Backup\Bobruncer-pc\.

  There is another folder under Bobruncer-pc called Bobruncer-pc and all the backup files. I restore from the correct location? Also, the backup folder is 226 concerts but the backups were made from a hard drive of 80 GB... should I worry about this too?

  Thank you

  Dave

  Hi Colt4t5,

  Just to clarify, perform you a complete PC Backup or backup and restore?

  When you do return, and restore, it can be saved as a .zip file in the backup folder. You can decompress the file and retrieve the required files.

  Restore files from a backup
  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-files-from-a-backup

  Back up and restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  I hope this helps.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• DRM-61026: cannot create the session of the user for the following reason: the connection has failed. User name or password.

  Im very new to Oracle DRM and Im trying to get the configuration of the application on the Windows Server that is running SQL Server 2008.  When I try to connect to the Web Client I get this error.

  DRM-61026: cannot create the session of the user for the following reason: the connection has failed. User name or password.

  Can you please help

  The problem is solved, reinstalled DRM and recreated the repository. the password has a symbol that causes the problem, @.

• A safety class is not found in this JAVA virtual machine for the following reason: sun.security.x509.CertAndKeyGen

  I'm trying to start OUD 11.1.2.2.0 after a new installation on Windows 2008 Server (oud - setup.bat) and I see the following error. Any ideas?

  [18/Apr / 2014:13:34:04-0600] category = gravity CORE = INFORMATION msgID = 132 msg = The Directory Server starts the configuration of the boot process

  [18/Apr / 2014:13:34:05-0600] category = gravity CORE VIEW msgID = 458886 msg = directory = unified Oracle 11.1.2.2.0 (build 20131115153045Z, R1311150604) commissioning

  [18/Apr / 2014:13:34:08-0600] category gravity = RUNTIME_INFORMATION = VIEW msgID = 20381717 msg = installation directory: C:\Oracle\Middleware\Oracle_OUD

  [18/Apr / 2014:13:34:08-0600] category gravity = RUNTIME_INFORMATION = VIEW msgID = 20381719 msg = Instance directory: C:\Oracle\Middleware\asinst_1\OUD

  [18/Apr / 2014:13:34:08-0600] category gravity = RUNTIME_INFORMATION = VIEW msgID = 20381713 msg = Information FMV: 1.8.0_05 - b13 by Oracle Corporation, architecture 32 bits, the size of the heap 652476416 bytes

  [18/Apr / 2014:13:34:08-0600] category gravity = RUNTIME_INFORMATION = VIEW msgID = 20381714 msg = JVM Host: slc00dbh.us.oracle.com, running Windows Server 2008 6.0 x 86, size of 8177541120 bytes of physical memory, the number of available processors 2

  [18/Apr / 2014:13:34:08-0600] category gravity = RUNTIME_INFORMATION = VIEW msgID = 20381715 msg = JVM Arguments: ' - Dorg.opends.server.scriptName = start - ds. "

  Exception in thread "main" java.lang.ExceptionInInitializerError: a safety class is not found in this JAVA virtual machine for the following reason: sun.security.x509.CertAndKeyGen

  to org.opends.server.util.Platform$ PlatformIMPL. < clinit > (Platform.java:132)

  to org.opends.server.util.Platform. < clinit > (Platform.java:85)

  at org.opends.server.util.CertificateManager.generateSelfSignedCertificate(CertificateManager.java:283)

  at org.opends.server.admin.AdministrationConnector.createSelfSignedCertifIfNeeded(AdministrationConnector.java:703)

  at org.opends.server.admin.AdministrationConnector.initializeAdministrationConnector(AdministrationConnector.java:182)

  at org.opends.server.core.ConnectionHandlerConfigManager.initializeAdministrationConnectorConfig(ConnectionHandlerConfigManager.java:356)

  at org.opends.server.core.DirectoryServer.initializeAdministrationConnector(DirectoryServer.java:2872)

  at org.opends.server.core.DirectoryServer.startServer(DirectoryServer.java:1539)

  at org.opends.server.core.DirectoryServer.main(DirectoryServer.java:9930)

  C:\Oracle\Middleware\Oracle_OUD > java-version

  Java version "1.8.0_05".

  Java (TM) SE Runtime Environment (build 1.8.0_05 - b13)

  The Client Java VM (build 25, 5 - b02, mixed mode, sharing)

  I used the following jdk based on the matrix and it worked fine:

  C:\Oracle\Middleware\Oracle_OUD>Java-version

  Java version "1.6.0_24".

  Java (TM) SE Runtime Environment (build 1.6.0_24 - b07)

  The Client Java VM (build 19.1 - b02, mixed mode, sharing)

• Documentation for the automation plugins

  Hello

  I'm new with Oracle OSM 7.2.2 and trying to find documentation for the feature that is available in automation_plugins.jar

  I see that there are many classes available that can be used in XQuery Automators, for example:

  declare namespace context = "java:com.mslv.oms.automation.TaskContext";
  declare variable $context external;
  context:completeTaskOnExit($context, "success")
  

  There is nothing in Oracle Communications order and Service Management Documentation that describes what classes are available in automation_plugins.jar and how they can be used. Is there a javadoc or other documentation somewhere?

  Thanks in advance

  Hello

  Yes, there are java documentation available. It will come with SDK during installation of the OSM.

  Check your default folder: C:\Program Files\OSM\SDK\osm7.2.2.1.x.x-javadocs.zip.

  Hope this helps you.

  Concerning

  Srinivas

• I'll buy a range wide screen for the right reason?

  I currently shoot Adobe RGB, correct color using XRite color passport (when I can), test in lightroom and print using a Canon Pixma pro 9500 mk2.

  I use photo munki color to match my two monitors to my printer and I have enough happy with my results. However both my monitors are sRGB, during proofing I often get warnings from the range of monitors.

  My plan is to keep a sRGB for the web and games and replace the other monitor with a range wide screen.

  I get a new monitor independently, so I was wondering if I should get the following screen:

  http://www.Amazon.co.UK/GP/product/B00B1QTZOE/ref=oh_details_o00_s00_i00?ie=UTF8 & PSC = 1

  for the following reasons:

  1. The only thing in my workflow that can not handle a wide range is my monitor
  2. It is seems the best value for a range wide screen
  3. I think I can use my existing hardware standard to create profiles to keep constant color, so if the monitor is calibrated in the factory is not relevant
  4. The calibrator built controversial material is not a big problem for me because I have my own equipment

  Am I missing something?

  Should I spend the extra money on a NEC or an Eizo?

  I'm not a professional; However I like to shoot and print. I want to print to be the best it can. I understand that I can get good results with sRGB workflow, but it really upset me when I want to print a photo that clearly my monitor struggles to make.

  I always recommend Spectraview 272 - if you have the money for it. The only one to compete with it is the Eizo CG 276.

  It is much more than the range, it's true colors, good tonal separation all the way from 0-255 and consistency from corner to corner. And hardware calibration ensures absolutely smooth gradients without color or tonal stripes.

  b1uedust wrote:

  I also want to overcome all the problems with how windows supports multiple mismanagement on lut on a single GFX card which has two setup screens

  There is no problem; It is a myth strangely long life. There was a little problem with pre - SP1 Vista, where the LUTE was put at the door when the monitor went to sleep or the UAC has been invoked. It has been corrected in SP1 and has never been seen since. The only other possible problem is a Stallion without support monitor multiple (as the Spyder4express), but you can't blame Microsoft for this.

• Documentation for the conversion of virtual and physical memory

  Are there any decent documentation for the conversion of virtual and physical memory?

  Any help would be appreciated.

  Yes I do, I'll send you my notes!

  Matthew

  Kaizen!

• Documentation for the Acrobat Document object model

  Hello

  I'm trying to move my first not in this area, I hope you can bear with my naïve questions.

  I'm trying to find documentation for the Acrobat Document object model. To my surprise, a search in the archives of the forum failed.

  I remember download out of curiosity some Adobe's PDF documents on the execution of JavaScript in Acrobat, ADOM precisely about one (but I could be wrong it was a few years ago and I'm getting old): these documents of the are a thing of the past?

  Thank you very much.

  Giordano

  Have a look here:

  http://www.Adobe.com/devnet/Acrobat/JavaScript.html

  The link is for reference in version 9, which is generally pretty good.

  But if you want the last being (PDF form), you can find it inside the

  Package Acrobat X SDK, here:

  http://www.Adobe.com/devnet/Acrobat/SDK/EULA.html

• Documentation for the Plugin Actions

  I would use some of the shares that come with the UCS Plugin library, but I don't understand the functions, the input parameters or out parameters. Can you tell me where these could be documented?

  A little late but it might be useful for anyone else looking for the same...

  So it must be valid for each plugin:

  1.
  var arrayOfObjectsFromThatType = Server.findAllForType ("NameSpace:Type");
  Returns the array of all objects of this type.

  2.
  var specificObject = Server.findForType ("NameSpace:Type", id);
  Returns an object with the id and type

  3. all items of the UCS has the following properties:
  ID
  name
  DN
  multiUcsmDn

  The most important of all of these properties is multiUcsmDn. It is the unique id that has the code hierarchy. So, for this plugin id = multiUcsmDn. Examples.

  'System' will be multiUcsmDn = "http://10.23.34.34/" - not sure for the exact system, but you can understand.
  "Châssis" will be multiUcsmDn = "http://10.23.34.34/sys/chassis-1".
  "'Blade' will be multiUcsmDn =" "http://10.23.34.34/sys/chassis-1/blade34"

  In order to have all of this in mind, you can do the following

  1.

  systems of var = Server.findAllForType ("UCSM:System");
  Returns the array of all registered systems of UCS

  2.

  Not simple here, but you can filter the chassis based on a selected UCS system.

  var allChassis = Server.findAllForType ("UCSM:Chassis");

  You can filter the multiUcsmDn chassis. Something like
  If (chassis.getMultiUcsmDn () .indexOf (system.getMultiUcsmDn ())! = - 1).
  then add this frame to the list so that you can filter only the chassis that are bound to the UCS systems you have chosen.

  3.

  The next step is easy, because the chassis has the method getBlades(). The two properties that can be useful here 'status' and 'assignedToDn '. It will identify if the condition of the blade was provissioned and so on.

  4.

  In this case, looking for blades that are not the provission in previous steps, there is a workflow of service profile to assing blade - "assign a service profile to a blade.

  Hope it is useful.

  Thank you

  Igor.

• Apple tv 4th gen unable to buy the movies if to never ask for the password and code value of active access

  Hello

  I noticed that since a few weeks I'm not able to buy a movie more if:

  -Set store account never ask for password

  -Activate restrictions (set a password) and all buy "limited."

  It works with the same configuration perfectly on my Apple TV 1st, 2nd and 3rd generation, where clicking on the buy button you are prompted to enter the password instead of having to enter your iTunes account password every time.

  But on the Apple TV 4th gen, once I click the button to buy, I get the circle of rotation and it keeps just there, never ask the password so that the operation never happens.

  If I disable the restrictions for the purchase of movies, I can buy the movie (do not ask for an access code and password)

  If I put the password on all your purchases, I am also able to buy the film.

  But still, if I set the password to "ask always", then enable password, set 'focused' purchases (so I'm in the best situation: should I get the password dialog box when I'm about to buy anything, rather than the full itunes password) it simply doesn't.

  I tried: record / stop all accounts (not just the store, but also iCloud, gamecenter, home sharing, etc) - nothing

  Also tried to restore the device and set up from scratch: nothing.

  Apple TV 4th gen updated to the latest version of the software (tried to update, said: I'm updating)

  And again, if I try to do the same thing on Apple TV 1st generation, 2nd generation, 3rd generation, they have all THE work. (Click on buy, get the guest password, enter my 4 digits, in fact)

  The thing is that I am convinced that it worked before this nonsense.

  I'm in Spain, and my account is linked to the Spanish bank

  Any ideas?

  I'm afraid that you'll just have to disable restrictions until the problem is resolved.

  If you want to report your experience to Apple, you can send them your feedback here, choose 'Report a problem' in the menu type of feedback.

• Function documentation for the SignalExpress project

  I use the function 'project documentation' LabView SignalExpress 2009 in my application project.

  The draft measure a pressure signal permanently in different situations. I want to present my project document is a list of locations of the siganl of pressure taken under different situation, with a plot for each situation so that readers can easily compare the plots.

  For example, I want the document states:

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  At 10:00 at low flow:

  ground pressure siganl

  At 11:00 with increased flow

  the same pressure signal ground

  etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  What I did was flirting with the pressure signal in my documentation of the data acquisition phase in the project tree, but in doing so, I could only show the last parcel of this signal in my documentation, the plot is in real time, just like what shows in the display of the data.

  Is there a way to show the same siganl taken at different times in a documentation?

  Thank you!

  Hello

  You can totally do this by using a feature called "instant."

  Rather than drag the step signal directly in your project document, first create a snapshot of your data using the menu option "use > create snapshot...". (Ctrl + Shift + T) »

  A dialogue will appear asking you what signals you want to instant. After selecting / them and clicked on Ok, your new snapshots will appear in the section overview of the application (in the left corner below, by default).

  Drag these signals on your project document. When you are ready to create your next snapshots after changing the configuration, you can select "Operate > repeat the last Snapshot (Ctrl + T) ' to simplify your process.

  For more information about the snapshot, see using LabVIEW SignalExpress found under "Help > LabVIEW SignalExpress Help" and search on the keyword "snapshots."

  

  I hope this helps!

  Phil

• create documentation for the user

  I have a simple...

  I have a panel tabs. A tab is called DOCUMENTATION. I would like to have a button that the user can push that provides a context menu or the flight hover-text (maybe two) that contains some relevant troubleshooting information for the use of the physical instrument. Is attached to my style of fishing-line/duct-tape/man caves to do, there must be a more elegant way.

  My VI runs in a loop, so I need something that can handle in a loop.

  Thank you!

  See attached example.

  You can also add the tip Strip directly by clicking with the right button on control > properties > Documentation > advanced band.

  Run vi, click on the button if pop poster has it before use... Just added the event structure. Place your mouse on the same button it will show same help text in the edge Strip.

  Is that what you want?