Offer by guasto componente PowerEdge R710 [MS]

Buongiorno,

Ho Server UN PowerEdge R710 (Service Tag = ) stamattina mi è questo allert love Dove,.

Event: System Board PS redundancy: PS redundancy to system board sensor, redundancy lost said
Date/time: Friday, April 15, 2016 01:31:08
Severity: critical
Model: PowerEdge R710
Service etiquette: DQV705J
BIOS version: 6.4.0

MI sono is alla remote console e ho trovato a "Build redundancy power" error e lo del PS2 e status in error, come che if ditch rotto.

A tal purpose I wanted to get one offer per questo componente rotto (senza intervento del tecnico, visto che lo sostituiremo noi).

Buongiorno,

Con passing it mouse sopra identifier c Supporto Dell'e the voce "private message", it could mandarmi come message privato di seguito required information?

-Service tag del Server

By the spedizione (intervento o):

1. company name:

2 address:

3 City:

4 Provincia:

5 cap:

6 name/last name/number phone/e-mail del referent in loco:

With the fatturazione

1 nome società (o codice client o number order recent):

Address 2:

3 City:

4 Provincia:

Heading 5:

Name/last name/number 6 telephone/e-mail del referent by the fatturazione:

7 partita IVA:

Speaking saluti

Manual

Tags: Dell Products

Similar Questions

  • Dell PowerEdge R710 - power Ricambio

    Buongiorno,
    Ho need di one ' offer by United Nations alimentatore per PowerEdge R710 con serial number FCL5WN1, dal supporto telephone Dell mi hanno detto di inoltrare the request that.
    Grazie. Saluti.
    Honeywell
    G.Casale

    buongionro, sto contattando via e-mail.

  • Connect a Powervault MD1200 to a PowerEdge R710 5.1 running esx using SAS cables

    Hello

    I bought a Powervault md1200 and a perc h800 controller.

    I'll install the perc controller in my PowerEdge r710 5.1 running esx server.

    Then connect the md1200 to the r710 via sas cables. The powervault is no NIC.

    My question is, how to configure the RAID while booting the r710? I understand that if I were on Windows, I could use open manage but I'm not familiar with how to do this from a 5.1 esx server.

    I'd appreciate any help.

    Thank you

    Flynn

    Hello Flynn,

    What you need to do is to go into the Bios of your H800 controller and you can then configure your virtual disk MD1200.  Once you have the virtual disk created, then you will be able to do a scan in ESX & he should see the virtual disk that are created.  To access the boot controller bios you need to hit Ctrl + C to enter the bios.

    Please let us know if you have any other questions.

  • Request alimentatore per PowerEdge R710 [CF]

    Buongiorno,

    avrei need di UN alimentatore per PowerEdge R710 take it cui service TAG e F4FRN4J, my dal supporto Dell mi hanno detto di write that. He codice che ho letto sull'alimentatore e n870p-s0, my come posso fare per sapere e thing i prices?

    In hoist foto dell'alimentatore.

    Buongiorno, the sto contattando by mail.

  • [EC] PowerEdge R710 error: 5 E1810 HDD failure

    Buongiorno, di abbiamo UN UN PowerEdge R710 con TAG H1S5S4J che presenta error disco in oggetto. Chiedo UN preventivo como Logserv S.r.l. by the sostituzione nao.

    In attesa di a vostro riscontro, lascio Reed he mio personale interno. 0371-763973.

    Dear client,

    Con passing it mouse sopra identifier c Supporto Dell'e the voce "private message", it could mandarmi UN message privato.

    Nel caso in cui as aver need di assistenza telefonica is Pagaré a ticket di Assistenza.

    SE if need di una delle quotazione left in sostituzione can rates UN preventivo senza Pagaré the assistenza.

    By request, we have our o di need any it client codice di vecchia quotazione o.

    Nel caso in cui non his di queste information times need che compilasse i seguenti campi:

    -SERVICE TAG-

    By the spedizione:

    1. company name:

    2 address:

    3 City:

    4 Provincia:

    5 cap:

    6 name/last name/number phone/e-mail del referent in loco:

    With the fatturazione (is different)

    1 nome società (is it client code):

    2 via:

    3 City:

    4 Provincia:

    Heading 5:

    Name/last name/number 6 telephone/e-mail del referent by the fatturazione:

    7 partita IVA

    Speaking saluti

    EC

  • Dell PowerEdge R710 with windows server 2003 R2 is not start windows in normal mode.

    Hi Sir,

    Dell PowerEdge R710 with windows server 2003 R2 is not start windows in normal mode after upgrading the RAM to 64 GB.

    Arrangement of RAM is made 4 our 16 GB of RAM on 2 channels. I get no error message about the RAM configuration. It is booting in safe mode but not start in normal mode, his hanging during windows startup.

    Please give me guide to solve this problem.

    I thank & regards

    Ramanantsoa D

    Thanks for the reply.

    My version of windows is 32-bit Windows server 2003 Enterprise Edition Service Pack 2.

    Although I have not tried switching/EAP, I will try that and get back to you.

    And again something I have an idea of the installation of windows server 2008 R2 Standard version on this server, it will support? Please let me know Chris.

    Thank you.

  • Wake up the PowerEdge R710 on the power supply power

    Hallo!

    I have a PowerEdge R710 server and try to configure startup when the main switch in case 19 "is turned on. No chance, there is no option in the BIOS. It is possible at all?

    Will be grateful for your suggestions...

    WK77,

    In the BIOS to the title of the SECURITY of the SYSTEM, you have AC POWER RECOVERY. If you set that on IT and programming your waiting time if desired, and then the will to power server when it has power restored to it.

    I would like to know if that's what you were talking about.

  • Adding disks RAID PowerEdge R710

    We have a PowerEdge R710 running a RAID1/RAID5 configuration.

    • PERC 6 / i SAS Raid Controller with 2 x 4 internal connectors.
    • RAID1 is composed of (2) 146GB 15K drives 2.5 "SAS.
    • RAID5 is composed of (3) 500GB 7.2 K Nearline 2.5 "SAS drives.
    • (3) empty bays are available.

    The server running VMware ESXi v5.0.0. We have almost maxed out storage so I need to add storage. I don't know what are the options I have to do this. These are the options that are possible, I hope.

    • Add 500 GB (3) discs the same as installed readers and expand the RAID5.
    • Add 500 GB (3) discs the same as installed readers and create a 2nd RAID5.
    • Add (3) 1 or 2 to 7.2 K near-Line SAS 2.5 "drives and create a 2nd RAID5.

    Can the PERC6 / i controller supports an another RAID5?

    bhartung
    • Add 500 GB (3) discs the same as installed readers and expand the RAID5.
    • Add 500 GB (3) discs the same as installed readers and create a 2nd RAID5.
    • Add (3) 1 or 2 to 7.2 K near-Line SAS 2.5 "drives and create a 2nd RAID5.

    These are possible.

  • Documentation on the establishment of a PowerEdge R710 from scratch

    I got a PowerEdge R710 with no hard drives (and out of warranty). I added 6 WD RE3 1 TB disks. I'm new on PERC controllers and don't know how to start the implementation of this table. The only documentation I found was Dell PowerEdge RAID Controller cards H700 and H800 Technical Guide but it says nothing about the configuration of the table I can find. Is there documentation for a complete reconstruction of this server?

    I'm probably not the first person to do

    There are more than 1 way to get discs into the caddy. One of them will result in the data connection and feeding only reaching no not the player no matter how hard push you into the slot. I still have problems later, but I see you pushing me now.

  • Hard drive by PowerEdge R710 [MS]

    Good afternoon,

    It ns. Server DELL PowerEdge R710 (service tag ) ha UN disco che da problemi.

    The machine went up quattro "500 GB near line SAS 6 GB/s, 7.2 k 3.5"disco board hot-plug".»

    Ho tried a ' dare in the giro, my seems to che gli occhiata hard disk the da near Line SAS esistano più non 3.5 ".

    Could by help favore disco UN find by auswechseln quello che sta guastando if?

    Grazie thousand. Silvia (T.E.S.I. S.r.l.)

    Buongiorno,

    Con passing it mouse sopra identifier c Supporto Dell'e the voce "private message", it could mandarmi come message privato di seguito required information?

    By the spedizione (intervento o):
    1. company name:
    2 address:
    3 City:
    4 Provincia:
    5 cap:
    6 name/last name/number phone/e-mail del referent in loco:

    With the fatturazione
    1 nome società (is it client code):
    Address 2:
    3 City:
    4 Provincia:
    Heading 5:
    Name/last name/number 6 telephone/e-mail del referent by the fatturazione:
    7 partita IVA

    Speaking saluti

    Manual

  • Memory support for the Poweredge R710 speed

    The Dell Poweredge R710 supports up to 1600 MHz memories? As [manufacturer: SNP20D6FC / 16G |] [Dell Part #: A6994465] is compatible with R710?

    Osmanhamid,

    Frequency of memory in servers are affected by a number of factors, including; Speed DIMMS and CPU and memory configuration.

    R710 server supports:

    1. Speed up to 1333 MHz for one module of memory through
    2. Speed up to 1066 MHz for both modules of memory through
    3. Speed up to 800 MHz for three modules of memory per channel. All these speeds correspond to memory single or double modules. Therefore, the speed of 1600 MHz will be down-clocked at a speed suitable depending on the configuration.

    Let me know if you have any other questions.

  • Problem updating iDRAC and LC on Poweredge R710

    Hello

    I am facing problems updating one of our Poweredge R710 (all others worked like a charm). Using OME I could install almost all day, but iDRAC (Firmware 1.10--> 1.95) updates and controller of lifecycle (application 0--> 1.6.0.73) will not be successfully completed.

    OME to ESM_Firmware_CMDN0_WN32_1.95_A00 error message. EXE: "performance operation exceeded a specified time-out period. The update has not completed; You must restart your system and try again. "(even after several server restarts the message is always the same).

    Error message in OME for lifecycle - Controller_Application_GFFFC_WN32_1.6.0.73_A00. EXE: "update failed: failed to secure copy - the secure copy function has failed.

    When starting the server "Update Services system requirements" is shown in the upper right of the bootscreen. I've tried ressetting iDRAC (Ctrl + E at the start), turn off the server for 30 minutes (cable unplugged, replugged, waited 5 minutes, powered by the server) update system Build & Update Utility thorugh with SUU 7.3.1 and finally using the CentOS OM 7.3 Live DVD. None of this has worked successfully and I have no more ideas. Maybe someone has a?

    Here are the necessary links. Fires within the OS.

    DRAC - http://www.dell.com/support/drivers/us/en/19/DriverDetails/Product/poweredge-r710?driverId=63KCR&osCode=WS8R2&fileId=3287900761&languageCode=en&categoryId=ES#

    Then run this, it is a set of lifecycle controller repair. http://www.Dell.com/support/drivers/us/en/19/DriverDetails/product/PowerEdge-R710?driverId=8F07J&osCode=WS8R2&FILEID=2731110409&LanguageCode=en&CategoryID=SV

    Then update the LC with this - http://www.dell.com/support/drivers/us/en/19/DriverDetails/Product/poweredge-r710?driverId=F0D50&osCode=WS8R2&fileId=2984894513&languageCode=en&categoryId=SV#

  • PowerEdge R710 and perc h700, disc not visible in OS

    Hey,.

    We have PowerEdge R710 with perc h700 raid 5 controller physical drives under raid6 running. We have recently added a sixth of the road which is much smaller (512 against 4 TBS) we want to just format and use it as a normal drive in the OS (Ubuntu 12.04.5).

    However, the drive is not visible in the operating system. When you enter the settings of the RAID controller that it says that the drive is READY but not configured and all the options to the title of operations are grayed out. How can we make this hard drive is visible in the operating system?

    See you soon

    The H700 does NOT support non RAID, so all records first must be configured on the controller, before its presentation to the BONE. You must configure (initialize) as a single drive RAID 0.

  • Install.VGZ fails in ESXi 4.1 install on a Dell Poweredge R710

    I have a cluster of ESXi 4.1 six-host running on Dell Poweredge R710.  They start from a USB key connected to an internal USB port.  I did at least 12-20 installs on the same hardware without problem.

    When I try to re - install on the single ISO ESXi 4.1 host via the iDRAC, the installation fails when loading install.vgz with the error message: "Booting: MBI = 0x000100c0, enter = 0x0040024a.

    I studied the two codes and the only suggestion that I get, it's that my hardware is not supported (specifically that my 32-bit processor is not supported).  I do not have a 32-bit processor, so I know that I can surrender.  I downloaded the CPU VMware ISO (file:///C:/Users/pguarco/Downloads/VMware-CPU-Compatibility-e.x.p-160658.zip) compatibility, and my CPU meets all requirements.  Previous installation of ESXi host crashed for unknown reasons, where the re - install.  It is possible, that there is a hardware problem.  Any ideas on how to limit this problem?

    you are doing the right thing. only thing I could thing is bad ISO, (Please make sure that the checksum is correct). and the worst case material PE firmware update.

  • New SATA HDD are not detected on PowerEdge R710

    Hi guys,.

    I have a PowerEdge R710 with the reference number below

    Service number: ADMIN NOTE: maintain the label removed by privacy policy > | Express service code:

    ADMIN NOTE: kidnapped by the Express service code privacy policy >

    I have 2 x 750 GB SATA HDD that are not detected at boot of the server. Obviously, the installation of Windows Server 2012 is not possible because it does not find any drive installed in the system

    Please help as I am new to the hardware configuration.

    Thank you in advance.

    You must configure RAID first. If you use the RAID S100 controller on board, it is not compatible with 2012.

Maybe you are looking for