does not overheat, no display

Similar Questions

• Windows update does not work and displays C80044E error code.

  Windows update does not work and displays C80044E error code.

  Hello

  I suggest you to try the steps below and check if it helps.

  View update history.

  http://Windows.Microsoft.com/en-us/Windows-Vista/see-which-Windows-updates-are-installed

  Let me know the description the updates that do not have the status.

  Method 1: Try to reset components to update Windows from the following link and then try to install the updates.

  http://support.Microsoft.com/kb/971058

  Method 2: If the problem persists then try to set your computer in check and clean boot state, if the same problem occurs.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  More information: The problems with the installation of the updates:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Hope this information is useful.

• When I plug my portable hard drive to the usb port it does not read and display the contents...

  When I plug my portable hard drive to the usb port it does not read and display the contents...

  Hi deaza,.

  Ø Have you connected the USB hard drive to the computer directly or you have used an external USB hub to connect?

  O trying to connect to another USB port to check if it works?

  O the hardrive shows in windows of the computer when you connect it?

  Method 1:
  If you have installed security software, I suggest you to temporarily disable the security software and connect the USB and check to see if the same problem happens. Make sure that you enable the security software after checking.

  Alternatively, you can try to plug the USB key into a different USB port and check if it helps.

  Method 2:
  I suggest trying to launch hardware and troubleshooting of devices and check to see if it helps, here is the link:http://windows.microsoft.com/en-US/windows7/What-to-do-when-a-device-isn ' t-installed-correctly

  Method 3:
  If this does not help, then follow these steps:

  (a) remove all your USB devices. Use the safely remove the feature to turn them off.

  (b) open Device Manager and navigate to the section for USB. Uninstall all USB drives. There should be one for each USB port, and then restart.

  To open Device Manager, go to the link below and follow the steps:

  http://Windows.Microsoft.com/en-us/Windows7/open-Device-Manager

  (c) Windows should re - find all of the devices. If it is not the case, note the error message and let us know.

  You can also navigate to the link below and follow the steps to install the USB device.

  http://Windows.Microsoft.com/en-us/Windows7/install-a-USB-device

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• DualVision does not appear in display XP > settings

  Hello
  I have a Radeon 9200 video card in a 4 year old Sony Vaio with Windows XP.
  The two monitors that I hooked both display the same screen, desktop, email, photoshop etc. BUT there is NO dualvision in display > settings. I don't get the photos of monitor 1 and 2. I looked for a download for DualVision, but there isn't. My drive is partitioned and the restore disc may not work being what is on XP in the partition is there and the restore disc does not replace something, according to Sony.
  appreciate any help because I don't want to buy a new computer just to use the mercy of two monitors... Frank

  Hello
  Something like that, you need software Ati Hydravision which is available here . (Choose one Motherboard/Integrated video drivers and this software will be in position optional downloads )

• Windows does not load and displays a black screen when it is connected to the power supply

  Original title - Windows Vista running on my laptop Sony VAIO

  Trying to turn on my laptop using the built in battery nothing happens.  When the laptop is connected to the power supply and turned on Windows does not.  It shows something in the sense that it does not properly off.  It tries to load back to a system restore point before the last stop, but seems to fail again during this process.  All that is displayed is a black screen. Currently the power on light is on, the battery light is on, but the drive activity light is off.

  Yet once again, I switched on the laptop and finally the Startup Repair process is automatically called.  After the display of the bar to attempt repairs, the system has been repaired successfully.  As a result, the I ran my Norton anti-virus, followed by Windows Updatesoftware.

• In windows 7, Windows Media Player does not work and displays "Server execution failed".

  I am facing a problem when I want to open the WMP it does appear anything (do not open) and when I try to open a media file, then it displays "Server execution failed". Could any body help me solve the problem.

  Things to try:

  • Uninstall WMP then reinstall it of "features" - "turn on or off windows features" develop ' media features. and uncheck the 'Windows media player' reboot your PC and then do the same thing but check WMP to reinstall it.
  • run WMP - problem shooters in "search programs and files" enter "help" (without the quotation marks), in the results click "troubleshooting." Click on 'programs' and run the WMP troubleshooters.
  • Run the wmp FixIt - go to http://support.microsoft.com/fixit/?wa=wsignin1.0 and run the FixIt of MP.

  If it still does not work, try a SFC/scannow scan.

  If all goes well, one of the highest peuvent help.

• U3014, does not and no display?

  I turned on my PC this morning and after a few seconds, the monitor went dark. I bought the monitor a few months ago. I use a nvidia geforce GTX 690 with the latest drivers.

  I am connected via the display U3014 port to 690 GTX. I daisy chained a U2410 monitor to display U3014 out port. Both monitors have dark (because the U2410 is connected to the U3014).  I have a second U2410 connected directly to my video card. It still works fine. The two U2410s of work when it is connected directly to the video card.

  I tried a display different port cable to the PC. Nothing has changed. I tried the display port on the video card with a different monitor and it worked fine. Windows doesn't detect the U3014 display port. Windows going to detect DVI of U3014 to the DVI port on the video card, but the U3014 menu buttons will bring up is no longer the OSD to switch inputs so nothing is ever displayed on the U3014. I tried to run the monitor self-test as (by pressing the buttons on the monitor 1 and 4). Nothing appears on the screen. It does not yet look like the backlight U3014 is light. The power led lights up when it is plugged.  Also, I unplugged all the video cables to the back of the Rundfunk, reconnect the power cord. I just can't get anything to display on the U3014 including the OSD menu. The monitor buttons do nothing.

  Should I swap this monitor? How do I configure that? I am also concerned to obtain a delivered product to nine. I didn't use this form for a long time and waited about a year to buy it so that I'd get a monitor A03 new plant. I don't want a pathetic one refurbished with an A03 sticker on it and dead pixels. I have heard some horror stories about some of the exchanged units. I'm not happy, I spent more than $1000 on this monitor and worried about what I will receive if I Exchange it.

  Please help me. The U3014 is a great product when it works correctly. Thank you

  rkhrt27,

  Once outside the first 30 days from the date of the original invoice, the replacement will be a monitor refurbished/used. This Dell policy cannot be circumvented. Since your U3014 has a Service tag number, contact the Support Technology Guide for your country. Provide the following data so they can set up a perimeter monitor Exchange =.
  E-mail address:
  Name:
  Shipping address:
  Phone number:
  The monitor Service tag number:
  Monitor 20 digits alphanumeric serial number PPID:
  Reason:

• Windows 8 does not have a display Chinese language?

  I bought a windows 8 recently, and I wanted to install a Chinese game of Taiwan. But during installation are all he has numbers and letters that make no sense. Then I went to the control panel and try to install the Chinese display pack to see if it is the problem. That's when I discovered it doesn't have a display pack. I'm really confused because I used to own a window 7 and install the Chinese game and it worked perfectly. But this time it does not at all... So I really need help because I want to play the game with my friends.

  Hello

  I'm sorry to hear that you're having trouble with the Chinese language on your computer. I will try to help you with this question.

  I have provided a link below that will help you to install the Chinese language on your computer.

  Language packs are available for Windows 8 and Windows RT

  http://support.Microsoft.com/kb/2607607?WA=wsignin1.0

  Language packs

  http://Windows.Microsoft.com/en-in/Windows/language-packs#lptabs=WIN8

  Please report if you are still having the problem. I will be happy to provide you with the additional options that you can use to get the problem resolved.

• Release tab does not content to display tab

  I use Jdev 11 g, update 2.
  
  I have a page with a panelStretchLayout. The facet of boot has a component in the tree. The Center facet has a component panelTabbed with 2 showDetailItems, each with different panelForms.
  Manually by clicking on the tabs shows the correct content.
  
  The tree has a SelectionListener mapped to a managed bean method. When a node is selected, the bean method sets one of the disclosed showDetailItems.
  There are TRP for the showDetailItems based on the tree.
  This code will cause the current become right tab. The problem is that the content of the tab are not also IF this tab was not previously disclosed.
  
  An example:
  Tree watch departments & employees, the first present the Dept tab selected in the tree, the other presents the employee selected in the tree.
  When the page runs, the Dept tab is disclosed by default because it is the first.
  In the tree, select a Dept. The Dept tab is disclosed and the correct Dept is displayed.
  In the tree, select an EMP. The Emp disclosed but become tab is empty. The shape of the Emp does not appear.
  Select a Department from the tree to reset tabs.
  Now manually click on the employee tab. The forms display properly with the last selected employee Emp from the tree.
  In the tree, select a Dept. Now the Dept tab becomes disclosed but it is empty.
  
  My first thought was that it is a problem of RSP with children of the tab. But I tried to adjust PRR on the panelForms so that they are updated when the showDetailItems are updated. That did not help.
  I also tried setting the rendering and visible properties for the child (form) tab programmatically. No luck.
  
  My current code to the selectionListener is:
  
  public void setSelData (SelectionEvent selevt)
  {
  RichTree tree = (RichTree) selevt.getSource ();
  Salt of RowKeySet = tree.getSelectedRowKeys ();
  Iterator seliter = sel.iterator ();
  While (seliter.hasNext ())
  {
  Object rowKey = seliter.next ();
  tree.setRowKey (rowKey);
  FacesCtrlHierNodeBinding node =
  (FacesCtrlHierNodeBinding) tree.getRowData ();
  
  String viewDefName = node.getHierTypeBinding () .getStructureDefName ();
  If (viewDefName.contains ("Dept"))
  {
  setSelDeptNo ((oracle.jbo.domain.Number) node.getAttribute ("Deptno"));
  OperationBinding ob =
  (OperationBinding) bindings.get ("setCurrentRowWithKeyValue1");
  OB. Execute();
  } else
  {
  setSelEmpId ((oracle.jbo.domain.Number) node.getAttribute ("Empno"));
  OperationBinding ob =
  (OperationBinding) bindings.get ("setCurrentRowWithKeyValue");
  OB. Execute();
  }
  
  If (viewDefName.contains ("Dept"))
  {
  panTab.getChildren () .get (0) .getAttributes () .put ("disclosed", false);
  panTab.getChildren () .get (1) .getAttributes () .put ("disclosed", true);
  
  /*
  empsTab.setDisclosed (false);
  empsTab.setDisabled (true);
  deptsTab.setDisabled (false);
  deptsTab.setDisclosed (true);
  */
  } else
  {
  /*
  deptsTab.setDisclosed (false);
  deptsTab.setDisabled (true);
  empsTab.setDisabled (false);
  empsTab.setDisclosed (true); * /
  panTab.getChildren () .get (1) .getAttributes () .put ("disclosed", false);
  panTab.getChildren () .get (0) .getAttributes () .put ("disclosed", true);
  
  }
  }
  
  }

  Hello

  you partially refresh the paneltab? If so, Tristan if you the paneltab parent PPR?

  Frank

• Script errors often slow Firefox, does not and the display no longer responds.

  In recent weeks, firefox has often been insensitive, usually represented as "does not. It lasts anywhere from a few seconds to several minutes (maybe more, but by this amount of time, I lose patience and "end task" in the Task Manager.) It is usually followed by an error "the script is not responding. What script it's varies. I answered by clicking on "stop script" which usually fixes the problem temporarily.

  The problem seems to occur more often at random, but happen always predictable on site with videos like youtube. Here, it's also worse, take much longer to solve if we do at all. I have active flashblock, and sometimes the error occurs before I got the chance to activate the video and sometimes after, but occurs systematically. In addition, on this kind of site, the error "the script is not responding" will also go on which most of the time, which I have not seen anywhere else, which means that the only solution, after a certain time must end the process in the Task Manager. Sometimes, I tried to play the same video for half an hour without success.

  As I have spent some time in the Task Manager, I noticed that I find myself with many processes running for FlashPlayerPlugin_15_0_0_152.exe * 32 (Description: Adobe Flash Player 15.0 r0.) They accumulate more I use firefox, but disappear when I restart my computer. I'm away until at least 50 at any given time. Most use 128 or 124 K of memory, but about 1 in 7 uses between 1-5000 K. I don't know if it is related to these issues, but I only noticed it since it was started.

  I tried to reset firefox and it changed nothing of the above.
  If it helps, I've used Windows 7. Do not hesitate to ask for more details on my system and I will do my best to answer, although I'm not a computer expert. Thank you very much in advance for your help.

  Please update to version 32 and make sure that it also does not happen with the disabled extensions/addons.

  Was this an improvement when you have disabled the extensions?

• Satellite A200: nVidia 7300 Go does not save the display settings

  I'm using the latest drivers available, but I can not even save display settings in nvidia
  Control Panel. For example if I turn down the brightness and increase digital vibrance and apply
  These settings, the next time that I reboot or run and release a game settings ALWAYS comes back to the
  their default values.

  I can't use a monitor external because the default brightness settings
  are very painful! They are literally blinding! Color settings do not record of either.

  Support for the New Zealands tech told me that it is a feature of Vista. What's supposed to be a joke?

  I also get bad interference on the screen lines when using an external monitor. It's very bad.

  Hello

  Have you noticed that emits from the first day with the factory settings?

• Satellite A200 - does not start, no display

  Hello

  When I turn the power on the Panel before right lights are on and I can hear the fan and something about loading, but then I get two beeps sounds and nothing ever shows up. No BIOS, no start menu, no Toshiba splash, nothing. I read in the media FAQ comments holding backspace or take out the battery, but it did not help.

  I've had it for 3 years now and use it quite often, I guess that the motherboard has finally just blame but I want to be more secure. If I have to redress might it be a way I could back up the data on it?

  Thanks in advance.

  Hi asoberirishman

  If you have already checked the FAQ from Toshiba and followed the instructions, is there nothing more that you can do. What you can do must connect an external monitor to your laptop, maybe what he s only on the malfunctioning of the internal display.

  But more often in such a case there s a motherboard or CPU issue. You should ask a technician for laptop aid or with other words to check the hardware. Guys have access to all the tools of diagnosis of Toshiba.

  Good luck! :)

• Why text does not able to display text?

  Referring to the file linked following, I would like to know why it cannot display the text at all.

  Does anyone have any suggestions?

  Thanks in advance for your suggestions

  http://sdrv.Ms/1628Pwp

  There is no text inside, it's a series of brakes page

• Windows 7 starter edition: sceensaver not committed and does not turn off display

  I have Windows 7 starter on my Acer Aspire One.  The display has stopped turn off automatically (as it is supposed, by the power settings) when the computer has been sitting idle for some time.  I checked the power settings several times, as well as turned on the screen saver (but it won't commit).  I checked the display drivers & they are up to date.  I have not all connected devices that might wake the computer.  I have not installed new software recently and have any kind of function "awakening."   l normally play music by the bias of Windows Media Player or stream music online (Pandora and live365) when I fall asleep and so don't want to close the lid, but want the computer turns off the screen so that it would light up the room all night.  Please let know us what could go wrong.  Thank you!

  Hello

  Method 1: Run the troubleshooter of power

  You can run the troubleshooter of power to set your computer's power settings. The resolution of the problems of power check things as settings timeout of your computer, which determines how long the computer waits before turning off the display or enter the mode 'sleep'.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter

  Method 2:

   

  Follow the post proposed by Serge D.

   

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-desktop/screen-saver-display-power-off-Don ' t-work-when/498b768d-c786-4741-81d4-28d6d189a88f

   

  Hope the above information is helpful.

   

• Find a record that does not exist and displays a message

  When I run the following query why used, it displays the word 'FAILURE '.
  

  SELECT 
    CASE 
      WHEN table_name IN('DBA_OBJECTS') THEN 'PASS' 
      ELSE 'FAIL' 
    END TABLE_EXISTS 
   FROM dictionary 
  WHERE table_name = 'DBA_OBJECT'
  ;

  Ben

  Hey Benton,

  The query filter (WHERE table_name = 'DBA_OBJECT') cause zero record is returned.

  To trick you can use aggregate function that always return the single record even if the record is found or not. If no record is found, NULL is returned.

  SQL> SELECT CASE WHEN MAX(table_name) IN('DBA_OBJECTS') THEN 'PASS' ELSE 'FAIL' END TABLE_EXISTS -- OR NVL2(MAX(table_name),'PASS','FAIL') TABLE_EXISTS
    2  FROM dictionary
    3  WHERE table_name = 'DBA_OBJECT'
    4  AND ROWNUM = 1
    5  /
  
  TABLE_EXISTS
  ------------
  FAIL
  
  {code}