Database does not start after losing the current log file.

Similar Questions

• Computer does not start after running the utility Boot Lenovo.

  Hello
  I replaced the power supply with a CX550M of Corsair, increased memory by exchanging the 4 GB to 8 GB for a 16 GB total, I added a hybrid 2 TB Seagate HDD and all worked fine until yesterday, about 1 month.
  Yesterday, I decided to run all the tests of the Lenovo startup disk and after that I restarted, the computer does not start.
  When I press the power button, the fan starts and it stops after 3 or 4 seconds and nothing happens, the monitor says no signal, I removed the external USB disk and printer, I reoved the second drive and the same thing heppens.
  Any idea what this problem could be? Would it be a bad power supply?
  Thank you

  Mario

  Resolved, I erased the memory CMOS, moved to following ankle boot, back up the cmos.

  Thank you

• Black screen, high regular of underscore on the left does not start after reflashing the BIOS F.38 on HP2000-363NR

  HP2000 363NR, recently tried flashing the BIOS F.38 (here: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-116227-1&cc=us&dlc=&lc=en&o... ) to solve a problem of overheating.

  Well, it was a mistake.

  Now it does not start at all.

  Fans spinning upwards. Hard disk rotates.

  By pressing ESC, F1, F2, F9, F10 and F11 at startup to give appropriate (fast!) messages but then go to the same place:

  Black screen with flashing underscore in the top left. Leave it to this screen has no effect.

  Never see no text except the quick messages in the lower left (or "Press the ESC key for the system menu" down left based on nothing).

  Out and the relocation of memory does not work. Boot with a DIMM module does not work. Now hold power for one minute while the battery and plug on does not work.

  Battery is fully charged.

  OS is Windows 7 64 bit Home Premium, came with the laptop.

  Is it possible to return this BIOS?

  -Me

  Thanks to Xraytim in the post below, short-circuit the battery CMOS me returned to the previous BIOS. Need to remove card system as a whole to achieve this * beep * connector, but 34 screws later (34 = some # between 15 and 50), BIOS is back, problem solved.

  Thanks for the forum!

  -Tim

  http://h30434.www3.HP.com/T5/notebook-lockups-freezes-hangs/DV9858ca-won-t-boot-after-BIOS-update-won-t-power-with-AC/TD-p/555547

• T400s does not start after cleaning the keyboard

  Hello. I cleaned by T400s keyboard today after a few juice reaches the keys and the laptop does not start anymore. I removed the battery and the power cord, tried to deceive the 10 times, press the power button / stop, no still no results.

  Reset the CMOS does solve the problem?

  At first glance it seems that the laptop is powered LED fingerprint reader is turned on, but it turns off as soon as I unplug the charger.

  Any suggestions? Thanks in advance.

  This probably means that your keyboard is dead and need a replacement, which is pretty cheap from ebay.

• My copy registered and checked for XP Pro SP3 does not start after changing the motherboard. Second problem is that I can't find my original install of XP Pro disc.

  After failing to find the source of reliable performance from my PC, I decided to bite the bullet and replace the motherboard, memory and the CPU. I installed a triple base 435 Athlon and a motherboard Gigabyte MA74GMT. Awarded PC again started the first time - but Windows will not, I get a number of options but none work - safe mode brings up several lines of messages on the partition of multi (0) disk (0) rdisk (0).

  A previous post suggested that a similar message meant some kind of malware but if I replace the old motherboard, processor and memory Windows works very well - in fact I use it now.

  Do I have an option but to reinstall Windows from a CD? Otherwise I have a problem - I can't find the installation discs for each piece of software except my Windows XP Pro! I do repair discs?

  Thanks for your help.

  Hi DaGeLi,

  · Provide us with the complete message you receive.

  Follow the methods below:

  Method 1:

  You were able to start the first time, you can try to boot to the last known good configuration and check the results. Link to get the procedure please refer to: how to start your computer by using last good known Windows XP Configuration:http://support.microsoft.com/kb/307852

  Method 2:

  If it doesn't then you can follow the procedure from the below mentioned link. As you do not have the Windows XP CD you can follow the procedure if you have already installed on the computer to recovery console

  How do I recover from a corrupted registry that prevents Windows XP startup:http://support.microsoft.com/kb/307545

  Otherwise, you may need to make the boot floppies. See the link for the procedure below:

  http://support.Microsoft.com/kb/310994

  You can also contact the manufacturer of the system to get the Windows XP CD.

  For reference: how to fix a computer that does not start:http://www.microsoft.com/windowsxp/using/setup/support/nostart.mspx#2

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think

• database does not start because of the error 445

  Hello
  
  We have three databases on HP - UX 11.31 server, DB version is 10.2.0.4, at the slow pace, we started in all databases, when I tried to connect to the server, it was very slow, even the sqlplus took a long time, when checked all databases alert logs, and found the error in each log file alert. below
  

  ksvcreate: Process(m000) creation failed
  Sun Apr 10 12:56:56 2011
  ksvcreate: Process(m000) creation failed
  Sun Apr 10 12:59:00 2011

  The use of server resources has been very well with almost 15% 55% memory usage, CPU usage.
  
  I gave up the databases, then tried to start, failed to start with error for all databases. below
  
  ORA-00445: "PMON" background process is not started after 120 seconds
  
  Here is the content of the journal of the alerts for a database;
  

  ksvcreate: Process(m000) creation failed
  Sun Apr 10 13:09:17 2011
  ksvcreate: Process(m000) creation failed
  Sun Apr 10 13:24:29 2011
  Starting ORACLE instance (normal)
  LICENSE_MAX_SESSION = 0
  LICENSE_SESSIONS_WARNING = 0
  WARNING: Could not create SMR
  Picked latch-free SCN scheme 3
  Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
  Autotune of undo retention is turned on.
  IMODE=BR
  ILAT =242
  LICENSE_MAX_USERS = 0
  SYS auditing is disabled
  Sun Apr 10 13:27:10 2011
  ksdpec: called for event 13740 prior to event group initialization
  Starting up ORACLE RDBMS Version: 10.2.0.4.0.
  System parameters with non-default values:
    processes                = 2000
    sga_max_size             = 3221225472
    __shared_pool_size       = 1828716544
    __large_pool_size        = 16777216
    __java_pool_size         = 16777216
    __streams_pool_size      = 16777216
    nls_date_format          = dd-mm-yyyy
    nls_calendar             = Arabic Hijrah
    filesystemio_options     = NONE
    disk_asynch_io           = FALSE
    sga_target               = 3221225472
    control_files            = /oradb/oradata/centl/control01.ctl, /oradb/oradat
  a/cent/control02.ctl, /oradb/oradata/cent/control03.ctl
    db_block_size            = 8192
    __db_cache_size          = 1325400064
    db_writer_processes      = 4
    compatible               = 10.2.0.3.0
    db_file_multiblock_read_count= 16
    db_recovery_file_dest    = /arch
    db_recovery_file_dest_size= 32212254720
    undo_management          = AUTO
    undo_tablespace          = UNDOTBS1
    remote_login_passwordfile= EXCLUSIVE
    db_domain                =
    dispatchers              = (PROTOCOL=TCP) (SERVICE=centlXDB)
    smtp_out_server          = 10.241.16.118:25
    job_queue_processes      = 10
    background_dump_dest     = /u01/app/oracle/admin/cent/bdump
    user_dump_dest           = /u01/app/oracle/admin/centl/udump
    max_dump_file_size       = 1024
    core_dump_dest           = /u01/app/oracle/admin/cent/cdump
    audit_file_dest          = /u01/app/oracle/admin/cent/adump
    db_name                  = cent
    open_cursors             = 2000
    pga_aggregate_target     = 1699741696
  Sun Apr 10 13:31:50 2011
  USER: terminating instance due to error 445
  Instance terminated by USER, pid = 2089

  Contents of the Trace file for one of the databases;
  

  ORACLE_HOME = /u01/app/oracle/db
  System name:    HP-UX
  Node name:      db01
  Release:        B.11.31
  Version:        U
  Machine:        ia64
  Instance name: cent
  Redo thread mounted by this instance: 0 <none>
  Oracle process number: 0
  Unix process pid: 4667, image: oracle@db01
  
  *** 2011-04-10 15:44:19.475
  Dynamic strand is set to TRUE
  Running with 2 shared and 242 private strand(s). Zero-copy redo is FALSE
  *** 2011-04-10 15:50:40.280
  Waited for process PMON to initialize for 60 seconds
  *** 2011-04-10 15:50:40.280
  Dumping diagnostic information for PMON:
  OS pid = 4701
  loadavg : 1.36 1.35 1.29
  Swapinfo :
          Avail = 15520.08Mb Used = 2490.52Mb
          Swap free = 13029.57Mb Kernel rsvd = 1018.08Mb
          Free Mem  = 10161.05Mb
    F S      UID   PID  PPID  C PRI NI             ADDR   SZ            WCHAN    S
  TIME TTY       TIME COMD
  1401 S   oracle  4701     1  0 154 20 e000000413447080 53772 e00000017cefa140 15
  :49:39 ?         0:00 ora_pmon_cent
  /bin/sh[2]: /opt/langtools/bin/gdb:  not found.
  *** 2011-04-10 15:50:40.372
  *** 2011-04-10 15:50:50.470
  Waited for process PMON to initialize for 111 seconds
  *** 2011-04-10 15:51:31.180
  Dumping diagnostic information for PMON:
  OS pid = 4701
  loadavg : 1.36 1.35 1.30
  Swapinfo :
          Avail = 15520.08Mb Used = 2490.52Mb
          Swap free = 13029.57Mb Kernel rsvd = 1018.08Mb
          Free Mem  = 10160.98Mb
    F S      UID   PID  PPID  C PRI NI             ADDR   SZ            WCHAN    S
  TIME TTY       TIME COMD
  1401 S   oracle  4701     1  0 154 20 e000000413447080 53772 e00000017cefa140 15
  :49:39 ?         0:00 ora_pmon_cent
  /bin/sh[2]: /opt/langtools/bin/gdb:  not found.
  *** 2011-04-10 15:51:31.250
  Killing process (ospid 4701):  (reason=x4 error=0)
  ... and the process is still alive after kill!
  *** 2011-04-10 15:51:40.190
  KSTDUMP: In-memory trace dump
  TIME(usecs):SEQ# ORAPID   SID EVENT  OP DATA
  ========================================================================
  kground PMON
  2C463A42:000000F8  1999     0 10254  42 KSBS1P: timed out while waiting
  2C463A48:000000F9  1999     0 10254  51 KSBS1P: out of loop: process did not sta
  rt
  KSTDUMP: End of in-memory trace dump
  *** 2011-04-10 15:51:40.190

  All databases have similar trace files, I rebooted the server and still none of the database begins.
  The use of server resources seems to be very good;
  

  oracle$ iostat 3 3
    device    bps    sps   msps
  
     disk3     93    6.9    1.0
     disk5     17    2.4    1.0
    disk17      0    0.1    1.0
  
     disk3     21    4.3    1.0
     disk5     20    4.0    1.0
    disk17      0    0.3    1.0
  
     disk3      0    0.0    1.0
     disk5      0    0.0    1.0
    disk17      0    0.0    1.0
  
  oracle$ swapinfo -tan
               Kb      Kb      Kb   PCT  START/      Kb
  TYPE      AVAIL    USED    FREE  USED   LIMIT RESERVE  PRI  NAME
  dev     24576000       0 24576000    0%       0       -    1  /dev/vg00/lvol2
  reserve       -  918204 -918204
  memory  15892564 2550292 13342272   16%
  total   40468564 3468496 37000068    9%       -       0    -
  
  System: hrdbdr01                                      Sun Apr 10 16:25:28 2011
  Load averages: 1.61, 1.60, 1.55
  237 processes: 182 sleeping, 55 running
  Cpu states:
  CPU   LOAD   USER   NICE    SYS   IDLE  BLOCK  SWAIT   INTR   SSYS
   0    1.61  27.7%   0.0%  71.3%   1.0%   0.0%   0.0%   0.0%   0.0%
   1    1.59  32.0%   0.0%  67.0%   1.0%   0.0%   0.0%   0.0%   0.0%
   2    1.61  13.0%  14.0%  71.0%   2.0%   0.0%   0.0%   0.0%   0.0%
   3    1.60  10.0%  20.0%  69.0%   1.0%   0.0%   0.0%   0.0%   0.0%
  ---   ----  -----  -----  -----  -----  -----  -----  -----  -----
  avg   1.61  20.8%   8.9%  69.3%   1.0%   0.0%   0.0%   0.0%   0.0%
  
  System Page Size: 4Kbytes
  Memory: 974032K (512772K) real, 1317016K (704304K) virtual, 12491712K free  Page
  # 1/24
  
  CPU TTY  PID USERNAME PRI NI   SIZE    RES STATE    TIME %WCPU  %CPU COMMAND
   3   ?  4249 root     255 39 20140K  1612K run     42:41 49.96 49.88 stm
   2   ?  3360 root     255 39 20140K  1612K run     55:11 49.65 49.56 stm
   0   ?  3040 root     240 20 20140K  1612K run     72:27 49.08 48.99 stm
   1   ?  2419 root     241 20 20140K  1616K run     77:20 48.81 48.73 stm
   1   ?  4850 root     168 20 20140K  1612K sleep    4:15 23.99 23.95 stm
   2   ?  4583 root     168 20 20140K  1612K sleep   12:21 22.93 22.89 stm

  Hello

  No change around the IP address of the server has occurred?

  If Yes, the following Note of My Oracle Support can help you:

  Ora-00445: Background Process "Pmon" Did Not Start After 120 Seconds [ID 1301185.1]
  

  NB: It applies on Oracle * 10.2.0.3 and later *.

  Hope this helps.
  Best regards
  Jean Valentine

• XP pro do not start after changing the Boot.ini file

  The problem is that my C: partition Windows 7
  D: has XP Pro

  These should be considered right resp. partitions 1 and 2?

  I wanted to first XP pro to start the default partition.

  A few days ago, I made a change to the boot.ini file. But since XP Pro was not starting at all.

  I tried XP Pro to start first that the default partition.

  Given that XP Pro and my D: drive have not been starting, I consulted the boot.ini file in C:, Windows 7 partition and I changed the order (i.e. partition No.) in the boot.ini file and saved it to the required location, i.e. D:/WINDOWS/pss.
  through my drive C: of work, i.e. the partition of Windows 7, but it still does not work because apparently even though I save here, the actual values and the paths of the partition are not actually be changed on the system. I confirmed this by going into the CMD shell switching to D: and by running the command D: > bootcfg.
  Apparently any values I save in the boot.ini file that I save as a text file or "All files" in D:/WINDOWS/pss/it does not actually change in the system because whenever I run the command bootfg values are remaining still and not able to be changed, because apparently it is not saved in XP Pro and the D : partition. No matter what I do and what I put in the boot.ini file to access the values through the windows 7 partition, the values that bootcfg returns me are always the same and he refuses to change the name of path or anything else. No matter what orders, I also put in bootcfg himself.

  These are the values that bootcfg gives me:
  default: multi (0) disk (0) rdisk (0) partition (1) \WINDOWS

  Boot entries:
  Boot entry ID: 1
  Friendly name of operating system: MS Windows XP Professional
  Path: multi (0) disk (0) rdisk (0) partition (1) \WINDOWS
  The operating system load options: / noexecute = OPTIN/FASTDETECT/usepmtimer

  My XP Pro partition is simply not booting, and it of my main partition and has all my work. It is imperative that it starts.

  My Windows CD is also not start because apparently my DVD drive does not work properly, I had the anti malware threatfire (ThreatFire) installed on my XP D:Windows program disk but have uninstalled just in case it was blocking my changes to the system.

  On C:Win7, I put the default operating system option in the Advanced tab for Win7 and the D:XP Pro to XP Pro, when he was the starter and work. Now I can only access my files D:XP Pro Player C:Win7. But XP is not just start. What shd - I do? Thks.

  I don't have a very practical windows CD but my CD/DVD drive is not read and does not properly.

  Looks like your original post stated that your cd/dvd does not work.

  Respectfully, you will continue these hap hazard patches and your computer will not start at all. I'll try to help you once again. Please follow closely.

  Start your computer by loading Windows 7. Click HERE and download EasyBCD. Install the software in trial version. Once installation is complete open EasyBCD. You will see an interface like the image below. Click Add a new entry.

  

  A new screen appears as in the image below. Use the drop down menu to select Windows NT / 2 k/XP / 2 k 3 as described below. Type the name of the operating system in the box below. Of course, it will be Windows Xp (you can add the home or Pro to the name if you want). Make sure now that there is a check mark in the box "automatically detect the correct player. Once you have completed these steps click on 'add an entry '. That's all! You are finished. If all goes well, and if you have followed these steps carefully, there, now you have a system dual boot.

  

  You can now start working on your cd/dvd problem.

• Windows does not start after changing the partition with external software

  Hello

  I messed up and followed some bad advice.  Water under the bridge, but I want to recover my bootcamp partition if possible.  I've seen several messages with the right process, but decided to post hear instead of assumptions.  I am running OS X El Capitan on an early 2011 MacBook Pro.  My 256 GB SSD is a bit pressed and tried to be too stingy with the Boot Camp partition, so my current troubles after resizing.  I have 10 Windows on the bootcamp partition.

  I'm going to throw a bunch of data from my survey here.

  Capella: ~ list of the ronh$ diskutil

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 250,1 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage Macintosh HD 190,5 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft database BOOTCAMP 58.7 GB disk0s5

  / dev/disk1 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD GB + 190,2 disk1

  Logical volume on disk0s2

  B6DC811B-004D-4245-83C9-8FAA0B51FD9E

  Unencrypted

  Capella: ~ list of cs ronh$ diskutil

  CoreStorage groups of logical volumes (1 found)

  |

  + Logical Volume - Group 487E3580-D1BE-4A6D-A33C-38C8DD8ABA34

  =========================================================

  Name: Macintosh HD

  Status: online

  Dimensions: 190546800640 B (190.5 GB)

  Free space: 19005440 B (19.0 MB)

  |

  +-< physical="" volume="">

  |   ----------------------------------------------------

  |   Index: 0

  |   Disc: disk0s2

  |   Status: online

  |   Dimensions: 190546800640 B (190.5 GB)

  |

  + -> 37BE876E-8E51-47C3-8D62-001EC021DE56 family of Logical Volume

  ----------------------------------------------------------

  Encryption type: no

  |

  +-> Logical Volume B6DC811B-004D-4245-83C9-8FAA0B51FD9E

  ---------------------------------------------------

  Disc: disk1

  Status: online

  Size (Total): 190175473664 B (190.2 GB)

  Reversible: Yes (no required decryption)

  Name: Macintosh HD

  Volume name: Macintosh HD

  Content indicator: Apple_HFS

  Capella: ~ ronh$ sudo TPG - vv - r show/dev/disk0

  Password:

  See the TPG: / dev/disk0: mediasize = 250059350016; SectorSize = 512; blocks = 488397168

  See the TPG: / dev/disk0: MBR suspicious to sector 0

  See the TPG: / dev/disk0: Pri GPT to sector 1

  See the TPG: / dev/disk0: GPT Sec at sector 488397167

  start index size summary

  0 1 MBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 372161720 2 part TPG - 53746F72-6167-11AA-AA11-00306543ECAC

  372571360 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  373840896 1024

  373841920 114554880 5 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  335 488396800

  488397135 32 table dry GPT

  488397167 1 dry GPT header

  of gdisk.

  Command (? for help): p

  Disk/dev/rdisk0: 488397168 sectors, GiB 232.9

  Logical sector size: 512 bytes

  Identifier (GUID) of disc: FD5932B4-069B-4CCE-A2EE-99AB5720CA17

  Partition table contains up to 128 entries

  First usable sector is 34, last usable area is 488397134

  The partitions will be aligned with the boundaries of sector 8

  Total free space is 1365 sectors (682,5 KiB)

  Starting number (sector) end (sector), Code name of size

  409639 40 1 200.0 of MiB EF00 EFI system partition

  2 409640 372571359 177.5 giB AF05 Macintosh HD

  3 372571360 373840895 619.9 MiB AB00 Recovery HD

  5 373841920 488396799 54.6 giB 0700 BOOTCAMP

  

  It is worth spending time to recover?  Thank you.

  Ron

  1. can you describe the problem and the steps you took to get here?

  2 can scroll you down to the next MS data (after that highlighted) and press 'p' to the list of files? Press ESC, once only, to return to this list.

• OptiPlex 755 USFF does not start after changing the cmos battery

  I have a desktop Optiplex 755 USFF requiring the cmos battery to replace. After the replacement of the computer will not start. It brings up the menu windows start, the sasfe mode, safe mode with network set mode command prompt, security, last know good configuration and boot normally. Any option will bring to the top of the WIndows XP loading screen and then re-boot of the computer right back to the start screen. A big loop. I can get the hard drive to boot in an Optiplex GX280 without problem. I was told of the motherboard needs to be replaced, but I changed the units of the system and the same thing with this hard drive.

  I tried to reinstall the operating system and get all the way to "starting windows" and then the blue screen stop error message 0x0000007B (0xF7A10524, 0xC0000034, 0x00000000, 0x00000000) dead. The computer is WIndows XP SP3, 1 GB of ram with 80 GB hard drive. It seems that the Setup program does not recognize the hard drive.

  Any help would be appreciated.

  After several hours of experimentation, I finally found the correct BIOS settings in order to get the computer to boot. There are three BIOS settings that need to be changed or check settings by default so that it can work. SATA 0 must be activated, SATA operations must be changed from AHCI, ATA and in the modular Bay, by default "far-sighted" should be replaced by the IDE. Save the settings and start the computer to the right upwards.

• VCenter Service does not start after changing the port number

  Hi all

  Accidentally, I changed the port number for the Vcenter server from the portal of VCenter 10443 and dint realize that the Java application uses 10443 so.

  Could not start the server vcenter service, because its raise an error saying 10443 port is already im currently byt used another application.

  I tried to stop the Java service, in order to start the vcenter service and make changes to port again, numbers but I am unable to stop the java application.

  Please, if anyone knows how to change the number of Vcenter via config port or any other way, please throw a comment... Its much appreciated.

  Thank you

  Nirmal

  If you use the MSSQL database, locate WebService.Ports.http in the VPX_PARAMETER table and change to the correct port.

• VCenter 5.1 does not start after joining the domain

  I have a VCenter Server 5.1 that I had to join the domain. The domain controller has died and I had to rebuild the domain from the ground controller. It is early in the generation of the environment and the user does not backup turns yet. The SQL database is on another virtual machine which I added to the domain and at least I think I have fixed the AD accounts on the SQL Server. I ping the SQL server machine vcenter server. I also have a Web server that uses the SQL Server and it works correctly. All thought that the web server uses a SQL account and not a Windows account. Having said that it's the VCenter error I get. I don't know where I can get more detailed logs. VCenter service dies as soon as I try to start it.

  Here's the log of events

  Application error event ID 1000

  Name of the failing application: vpxd.exe, version: 5.1.0.35539, time stamp: 0x514d6239

  Name of the failed module: vmacore.dll, version: 5.1.0.35539, time stamp: 0x514d5992

  Exception code: 0xc0000005 fault offset: 0x00000000000022f7 failed process id: 0xbd0

  Start time of application vulnerabilities: 0x01cefb39789687d1

  The failing application path: D:\Program Files\VMware\Infrastructure\VirtualCenter Server\vpxd.exe

  Path of the failing module: D:\Program Files\VMware\Infrastructure\VirtualCenter Server\vmacore.dll

  Report ID: bf5595b0-672c-11e3-958d-000c2944f450

  Just rebuilt the VCenter server, was faster than to try to fix it.

• Satellite Pro S300-120 does not start after replacing the CMOS battery

  Hello

  My friends laptop - a S300-120 - was having a few problems.

  I replaced some parts about this before, including a screen crack with no problems.

  However, he began to refuse to start saying "out of battery CMOS, Press F1 to enter setup". Of course you would have to do this, set the date and time, except & restart only to get the same message. We have replaced the CMOS battery with a with the same serial number and now the laptop will not boot.

  It does one of two things.

  It is one) seems to turn, turn to the top disk & CD player, cooling fan is 100%, then flashes the POWER ON led once, twice by orange, and then green to 1/2 second intervals, with no response from the keyboard or LCD.

  Or (b) turns on, turntable, does not turn up to cooling fan, POWER ON witness remains stable, no response from the keyboard or LCD.

  I re-assembled the laptop several times & can not find all the missing fittings or obvious signs of damage.

  The only thing I can think is that the motherboard has been damaged - somehow find replacements is delicate.

  Any ideas?

  Hello

  (> It is a) appears to turn on, turn the disk & CD player, cooling fan goes to 100% and then flashes him

  POWER ON led once, twice by orange, and then green to 1/2 second intervals, with no response from the keyboard or LCD.
  Usually, if the voltage in abnormal feeding malfunctions when IN DC will be blinking orange.

  In my opinion, it looks like a problem with the motherboard :(
  Eventually, you will need to replace the mobo ;(

• Does not start after using the recovery Toshiba Tecra M5 - disk

  After using the restore on my Tecra M5 CD, the computer cannot even start!

  What to do in this situation?

  Hi jbdoktor,

  Does that mean exactly?
  Now, what happens if you start the computer?

  Sorry, but without this information it is difficult to help you. Maybe you should try the recovery again disk

• WINDOWS 8 PRO DOES NOT START AFTER UPGRADING THE BIOS

  ACER Aspire 4730z

  I just updated my BIOS version. And after the easy upgrade restarted my laptop. And boom. My Win8 is not start now... help me :((

  Hello

  You will need to maybe get into your bios and restore the order of boot device... You would think that would be already fixed properly, but sometimes it isn't.

• Does not start after replacing the cmos battery

  HP m8430f, Vista Home Premium.  Worked very well but sometimes had to restart using "pulsed" F10 (5 seconds) then wait 5 seconds, and then F5, then ENTER, F10, then ENTER.

  I suspected the CMOS battery, so I removed it.  He tested "fair."  Got a new CR2032.  He attached the test counter, so it's okay  "I WAITED ALL NIGHT BEFORE REPLACING.  But the computer does not restart.  I went through the steps above and still no luck.  What to do next?  Thank you, Joe

  FIXED!  I removed the battery (I had to remove the sound card to get in the first place to the battery).  I waved it around a little when you reinstall.  Now it's working.  What I've done, I have no idea, but it works now.  Sorry for the post, but I was desperate.  Joe