Does not start on a battery Acer R7-572

Similar Questions

• C50-A-19 t satellite does not start with the battery mounted

  OK, first post here.

  I see similar questions coming, but as they are never QUITE the same, I am that posing in a new thread.

  I left my Satellite from one day to the next (do not remember if I had put off, or he simply had 'gone to sleep', but it has been connected to the grid).

  When I got to reboot, I got a power light on, but screen blank (black). After reading a few similar complaints on the internet (via another laptop!), I tried to remove the battery and power from the grid.
  This worked well (I write him in this state right now).

  But whenever I put the battery and try again, it will fail in the same way.
  I tried this company "press and hold power for 30 seconds" without success (but I'm not 100% sure of the EXACT procedure actions sequence).

  I have a few questions:

  (1) I take the laptop away from my office - is there a problem with everything just works like this (i.e. of the grid, with no battery inserted) indefinitely?

  (2) in any case, I want to solve the problem.
  If the battery has run COMPLETELY flat, and that the laptop can not it lights but also operate normally?

  Alternatively, is probably that the battery has not experienced a catastrophic failure and simply needs to replace?
  If so, I'll just buy a. BUT...

  What I don't want to do, is to pay for a costly spare battery, to find that it was actually another factor at the origin of the problem, and I'm back to square one and out of Pocket!

  Any advice would be welcome.

  Thank you

  Mike

  Hello

  According to your assignment, in most cases, you use the laptop connected to the power adapter but no battery. Is this correct?

  First we need to know that if the AC adapter is plugged in, the laptop should work correctly with - and without inserting the battery.
  If you unplug the AC adapter, the laptop should automatically switch to battery power. In this case, it is important that the battery is pretty cool power to provide the power for the laptop.
  In case the battery is empty, the laptop will not light.

  I recommend to insert the battery plug the power adapter and charge the battery for a longer period of time.

  You should also check if the battery is recognized by the Windows system and the battery charge indicator (battery in the taskbar icon) shows the State of battery charge.

  In case the battery is fully charged and the laptop does not work using the battery power only, you should test the new battery.
  If new battery does not solve the problem, s for laptop hardware needs an audit.

• Satellite M50D-A-10W does not start after the battery is completely empty

  I have a laptop Toshiba Satellite laptop Satellite M50d-A-10W AMD A, 15.6.

  I have problem when the battery is completely empty I have to use the needle achieve hard reset the switch behind the laptop... so I can't enter in bootmode with f2

  How can I solve the problem?

  Thank you

  I guess you are talking about the shutdown procedure force as described in this document:
  http://APS2.toshiba-tro.de/KB0/TSB3C03JR0000R01.htm

  This problem can appear in case the PC freezes, do not start or has a power failure.

  I think that the laptop turns off in case the battery is completely empty. In this case the system does not close properly.
  As the default state, the system keeps laptop but usually the unit carries out a stop of the hybrid. This procedure allows the laptop to start much more quickly, but it could affect the system startup in case something goes wrong during the process of closing.
  You can disable this hybrid mode and in my opinion, it is also recommended.

  Details:
  http://APS2.toshiba-tro.de/KB0/TSB2B03EY0002R01.htm

  However, to avoid these problems, it of very important to correctly perform the closing procedure.

• Laptop does not start: error BCD on Acer Aspire M3-581

  Hello

  Acer Aspire M3 581PTG my son has stopped booting.  At the start, immediately after the Acer logo, it now shows a blue screen with the message:

  Recovery

  Certain required information does not appear in the data of Configuration startup file. File: \BCD Error code: 0xc000000d

  He then refers to using the tools of recovery and the media, but we cannot locate Acer recovery disks and do not remember if the laptop came with everything.  I started by using a normal 8.1 Windows installation CD and tried to use different repair options, but nothing worked (perhaps because Acer has a SSD and HDD so need a specialized repair utility?).

  We contacted Acer but just received a generic response to do a factory reset.  If anyone has encountered this error or is able to offer a solution?

  Thank you.

  Try this:

  http://itsolutionsblog.NET/solution-to-your-PC-needs-to-be-repaired/

  If you still have problems starting, I suspect a hardware failure at this point, maybe the SSD or HARD disk.

  Contact your regional Acer support service.

• Y580 does not start after the battery indicator reset

  Hi fans of Lenovo! 3 months now since I bought a Lenovo y580. A notebook of beast when it comes to games. Recently, I tried to use a preinstalled software from Lenovo to reset my battery indicator because it showed an erroneous accusation. The software did his thing - he charged the battery to 100%, then acquitted at 0 and off my laptop. Now, it does not - turn the button market / stop just makes battery LED flash 3 times and that's it! I tried to disconnect the battery and turn on - but nothing happens. What should I do?

  Remove the battery and plug in the computer if the computer turns on then it might be the battery.

  If this is not the computer may have messed up and bit.

  and to be sure to keep it plugged in for a while.

  the recalebrater of entirely fresh battery then fully discharge

• Tecra S5 does not start on new battery

  Hello
  I recently bought a new battery for my Tecra (the original one has been able to the laptop for less than 10 minutes).
  When I put the new battery (which is fully charged) in my laptop and try to feed upward, the system hangs with a black screen
  and the text cursor blinking "_" in the upper left corner, before windows xp starts.
  It happens with or without AC adapter plugged.
  If I replace the new battery with the old, or remove and boot on power AC/DC, the system starts properly.
  If I boot on current alternative and insert the new battery and unplug the power, I can work until the next boot - so it seems that
  the new battery is OK.
  the new battery is not true toshiba but WhiteEnergy. I used the mark with my previous satellite and worked well.
  Do you have anny suggestions or to change settings?
  The symptoms are quite weired to me.

  > Symptoms are quite weired to me.
  For me, too. Settings to change? I put t really know what kind of settings can improve this.
  When you start your laptop on battery only, you can enter the BIOS settings?
  Have you tried to set on the default settings and check if something will change?

• Satellite L10-104 does not start after the battery totally empty

  Hello

  After leaving the laptop the weekend without the charger, the battery was totally empty. So I plugged back it it to charge the battery for a day.

  Now, when I press the power button the Green LED at the front lights up for about 3 seconds - nothing else is happening. No HARD disk does appear, no noise from fan coooling, nothing on the screen.

  Does anyone have ideas, what I could do to make it work again?

  Thank you

  Christian

  Hello

  Remove the battery and unplug the AC adapter from the laptop.
  Wait a little (1 hour) and then reconnect the two parts.
  Then try turning on the laptop computer. Maybe it helps

  If this will not help, then a hardware problem might be possible
  In this case the RAM modules must be verified in the first step.

  See you soon

• Tecra A6 does not start with battery only

  Hi all
  I'm having a strange problem with a Tecra A6 I picked up recently at the refurb because it does not start with a battery only: it starts only when / sector is also connected, but eventually DΘmarrer on battery alone (and works fine) with the power cord removed shortly after pressing the power button. It's just on battery alone, I get no answer by pressing the power on button (so the power outlet must be set at this first stage or I don't get anything).

  Now I'm wondering if maybe it's the battery voltage? It seems that there are 2 options for this model, a 10.8 v and the other at 11.1V. With loaded Windows and Hardware Monitor reports running the battery is at 0% wear level and cool until completely (so I don't think that the battery is faulty), but it indicates that the battery is running at * 11, 1V, * but the battery installed is actually the * model 10.8v*. Could that prevent any power on only to batteries?

  More information on the model I have:
  Tecra A6-PTA60E-0EJ013EN
  CPU: Intel Core 2 Duo T7200 2.0 Ghz
  2 GB of Ram.

  Thanks in advance for any help on this one. Essential, I would like to know is if I have a 11.1V battery to run this model correctly (and get it) on battery alone. If the voltage makes no difference so I guess it must be a weird motherboard problem and I need bother not buy a new battery.

  > Will have to buy another battery and see if the same thing happens (I'll know then if it is the motherboard), but in the meantime if anyone can let me know if the voltage is serious I would appreciate it.

  To my knowledge, the batteries for Tecra A6 should take in charge 10.8V
  There's piles more strong for example 5200mAh but the voltage must be the same 10.8

• Satellite A665 - battery not charge/notebook does not start.

  I have a problem with my new A665 Satellite.
  My battery won't charge and my computer does not start if the battery is in place. whitout the battery (with a/c) the computer works fine.
  Please help as I just bought it and without a pile of work a laptop missing its goal.

  Thank you
  Wimv

  > new Satellite...
  New? Don t waste your time trying to fix something on yourself. It is produced and it should work properly.

  Contact the nearest Toshiba service provider and ask for help. They should pay attention to this topic. For free, of course.

• Black MacBook does not start

  I have a 10 year old black Macbook, which does not start when a battery is installed.  If it is connected without battery installed, it lights up, but if there is a battery in it, even if it is plugged in, it will get the startup sound and the screen of the Apple gray, then turn off.  I got a new battery and charge it where the charger turned green, but the results are the same.

  Any suggestions?

  It is difficult to say what is happening with this machine, since the time and wear are considerations. I don't know what version of the operating system that you use, but there is a sequence of things you should do - in order of severity.

  http://www.howtogeek.com/217158/what-to-do-when-your-Mac-won ' t-start-up.

• My mini ipad 4 has no battery completely not discharged, called to the charger, but the system does not start. What should do?  Already a time connected to the charger, but the system does not start. I have iPad 3 months and never suffered no damage.

  My mini ipad 4 has no battery completely not discharged, called to the charger, but the system does not start. What should do? Already a time connected to the charger, but the system does not start. I have iPad 3 months and never suffered no damage.

  When connected to the charger make a forced reboot: hold the home and sleep buttons, wait for the Apple logo, release the buttons. May take a few tries.

• Satellite L300D does not start on battery, adapter needs to start

  Hello!
  I have my Satellite L300D since April last year, and suddenly my laptop does not start when the network adapter is not connected. Says battery 100% (full charge), when I am connected and started the system.

  Anyone any idea why my laptop no start on battery alone?

  I've already updated the BIOS to version 1.50, but it does not change a thing!

  (My warranty until April, so should I send in for service?)

  Thank you very much in advance!

  Hello!

  In your case I go for a local ASP (authorized service provider) and allow to check your laptop computer of these technicians.
  I think that it s a hardware problem, maybe the battery is defective and if you can just start the laptop with AC/DC adapter.

  Good bye

• 6735 b hangs and does not start on battery

  My 6735 b does not start on battery. Just hangs until I plug in the power supply. For some odd reason, I can't access the drivers even though I have the laptop regestered? Can someone post a link to the update of the bios for me?

  Glenn,

  The server is maybe out of service.  I reported the problem with the web page.  Yours is not the only page not available at the moment - something's up.

  Hang in there and try again later.

  Just for the record, in the case where it is useful:

  Test and calibrate the battery (Windows 8)

  Test and calibrate the battery (Windows 7)

• Acer 5749 does not start

  Hi all

  My acer 5749 flashed a blue screen while I was loading some film from a blue screen USB files is one of those blue screen of death but he went off so fast that I didn't have time to read. The laptop, then stop.

  I tried to restart and got a black screen with a high massif white slider to the left.

  Looked at the bios and is to recognize the hard drive because there is a model name and the series number but it does not start.

  I don't have the original OS drive to try it.

  I dropped the cell phone a week or so more soon on the floor and asked if its connected to that so pulled out the hard drive and reinstalled it, reset the bios to default and, sometimes, settings that it comes up with a screen saying

  TO ATHEOS PCIE ETHERNET CONTROLLER V2.0.2.7 (02/11/10)

  CHECK THE CONNECTION OF THE CABLE!

  PXE: MOF LEAVING INTEL PXE ROM

  NO BOOT DEVICE INSERT THE BOOT FLOPPY

  and sometimes it's just the black screen with cursor solid/horizontal dash above on the left.

  Is the hard drive that's duff and how do I check the disc before I get a new one or is it something else?

  Bob

  All done and works perfectly now thank you!

  Yes iso worked just above asked me for the windows product key and to check I had to do it by phone at the time, I didn't have no driver so no connection NET but everything seems to work fine now and no exclamation point yellow, thanks for the tips

  Bob

• My acer aspire one does not start. the scrolling windows screen, then screen turns off. logon appears and resets, sys

  My acer aspire one does not start. the scrolling windows screen, then screen turns off. but after a long time (45mins) the login screen appears and d sysytem restarts. I have a multi boot with 2 installations of xp, and this happens with both bones. not able to access my sys to bak - up also. all f8 options were considered, but no use.

  I have some bad sectors on d: (have total 3 drive partitions c:, d:, e: with xp on c: and e :))
  the sys wud show a blue screen and reboot when certain file wud b accessible on d:... now the sys cannot start all... pls help...

  Hi Srimotu,

  ·         You get an error message or an error code?

  ·         Have you made changes on the computer before this problem?

  Follow these methods.

  Method 1: Try starting it in last known good configuration.

  http://support.Microsoft.com/kb/307852

  Method 2: Try to start in safe mode.

  http://support.Microsoft.com/kb/315222

  If you are able to boot into safe mode, try a clean boot.

  http://support.Microsoft.com/kb/310353

  Note: After the clean boot for troubleshooting, return the computer to a Normal startupmode.

  Method 3: Disconnect external devices such as printer, scanner, etc. and try to start.

  Also disable automatic restart in the event of system failure

  http://support.Microsoft.com/kb/307973