doesn't stop after the update

Similar Questions

• LR doesn't stop after the last updated only with force quit

  LR doesn't stop after the last updated only with force quit

  Hi peterc48702056,

  For Windows, I'd say to set the priority of the process in Lightroom as a via the Task Manager

  For Mac, you suggested to copy the catalog to the location on the desktop or another location and then, check if the problem persists.

  Kind regards

  Claes

• brushes Photoshop rows and stops after the update to Yosemite

  After update to Yosemite, whenever I use the brush or tool Eraser, it stops or lags (I don't know what to call it).

  What happens is I can't hit the other shortcuts like '[' keys to increase the size of the brush, and even changing tools like pressing 'V', but if I click the icon it will be recovered.

  I checked the history panel, it stops there.

  I use

  Wacom Bamboo CTH-670

  Wireless keyboard

  Wireless mouse

  iMac (21.5 inch, Mid2010)

  I also did these things

  -Reinstalled photoshop and Wacom driver

  -If I use the mouse it works very well

  -Because the mouse is OK, I thought this is my wacom but used the brush in Lightroom, it works perfectly it

  -Using the clone as a brush stamp tool, it works perfectly.

  What should I do now?

  Are you running CS6? If Yes, go to Menus, shortcuts, tool Lasso or Photoshop constantly run when using a Wacom tablet. Mac OS

  and install the plug-in white window workaround. Let us know if this clears up the question

• Mac stops do not after the update of the sierra

  I've updated my MacBook Air (13 inches early 2015) to Sierra. After the update, it is not shut down or restart. If I click on stop, my screen goes black and the keyboard backlight is on. The judgment never ends. Its the same case on reboot too.

  Help, please. Thank you.

  Although this will help, but I have also reported this problem, like many other people:

  MacBook Air shutdown correctly

  macOS Sierra presents a serious problem that must be dealt with quickly

  Apple should give a direct response to this because it is obviously not an isolated incident.

• After the update to os2.2 my notifications sounds have stopped working

  After the update my os 2.2 shows that my notifications have stopped working, I tried to reinstall the software and I restarted my iPhone and watch several times.

  ..

• After the update to el Capitan my iMac will not be asleep. I put it to sleep and turn off the mouse and keyboard that goes with it, and 5-10 minutes later, he wakes up on his own. Now, I have to stop it after use and each time only. Major pain

  After the update to el Capitan my iMac will not be asleep. I put it to sleep and turn off the mouse and keyboard that goes with it, and 5-10 minutes later, he wakes up on his own. Now, I have to stop it after use and each time only. The Major pain. Any help would be greatly appreciated.

  Please test after taking each of the steps that you have already tried:

  Step 1

  Take all of the measures suggested in this support article, including those under the title "If the previous steps do not work." It is the starting point for a new effort to solve the problem.

  Note that, as stated in the article, the computer will not sleep, if some sharing services are enabled. In the menu bar, select

   ▹ System Preferences... ▹ Sharing

  Disable all sharing services.

  Step 2

  If sharing music iTunes home sharing is enabled, disable it or quit iTunes. Do the same with third-party applications that have a similar feature.

  Step 3

  Select

   ▹ System Preferences... ▹ Accessibility ▹ Speakable Items: Off

  Step 4

  Select

   ▹ System Preferences... ▹ ▹ Advanced Bluetooth...

  and uncheck the two boxes marked

  Open Bluetooth Setup Assistant at startup if...

  Step 5

  Reset the printing system.

  Step 6

  Back up all data.

  Triple-click on the line below on this page to select, then copy the text to the Clipboard by pressing Control-C key combination:

  /var/vm

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  A folder named 'vm' should open. Inside, there may be a file named 'drag '. Move this file and only this one in the trash, but do not yet empty. You will be asked for your password. Close the folder window.

  Restart the computer and empty the trash.

• After the updates of windows, the computer stops responding with a black screen at startup of the system

  Original title: Windows XP does not start after the update, no error message

  Has made no changes to the system, but the last thing that happened was an update of Windows security on stop.

  Now when I boot, the BIOS p.o.s.t. shows good HDs, good DVD-Rom, RAM, but Windows never starts, goes just a black screen, HDs are not accessed.

  -F8 does nothing, can't use the last known good Config or Mode safe

  -Change boot order in the BIOS to boot from the Windows XP DVD, hoping to get the recovery console, but the same thing: black screen, no attempt to spin-up DVD or HDs.

  -Removal of mobo battery to reset the CMOS, no joy.

  -Checked and re checked all connections inside.

  -Stripped devices and added one at a time, no joy.

  -Traded-in an old video card in case it was difficult to generate the higher res gfx, no joy.

  I was construction/upgrade / repair my own PC for 3 decades and can usually solve the problem and fix it myself, but this one me completely baffled.

  Any suggestions?

  Hi Cougarific,

  We recommend that you repair your Windows installation in according to method 2 of this article and check the result.
  See computer stops responding with a black screen when you start Windows XP
  

  Note: When you perform a repair installation, it restores the current installation of Windows XP to the version on the installation DVD. This requires you to reinstall all updates that do not appear in this version of Windows XP disc.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Creative cloud began the download of an update, but stopped after the download of 5 percent. Nothing works now and I can't access anything whatsoever. Help please!

  Creative cloud began the download of an update, but stopped after the download of 5 percent. Nothing works now and I can't access anything whatsoever. Help please!

  Please remove Cloud Creative app using:

  • Using creative cloud | Uninstall the creative cloud desktop application
  • https://helpx.Adobe.com/Creative-Suite/KB/CS5-cleaner-tool-installation-problems.html

  Install the cloud creative app - https://helpx.adobe.com/creative-cloud/help/install-apps.html

• HP ENVY dv6 Notebook PC: press the / STOP the envy of hp dv6 7204se do not work after the update of windows 10

  the power button of my hp dv6 7204se envy key do not work after the update of windows 10

  any help on this please?

  .

• After the update to OS 9.2.1 connection of my mini iPad with a VGA projector no longer works... Any clue?

  After the update to OS 9.2.1 connection of my mini iPad with a VGA projector no longer works... Any clue? Thank you

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

• Envy 15 only k - 007: doesn't stop after 1 hour when my lap top is on in windows 10

  After the update to windows 10, my usual high tower close when 1 hour passes turning, and I must stop it with power botton... My drivers are updated, but this problem is still there... What do I do? Help me please.

  Hello

  Try the following.

  Open settings and select System.  Select food and sleep, and then click additional power settings - in the next window, click on "Choose what the power button" in the left pane.

  In the next window, click on "Change settings that are currently unavailable" (close), then Remove the check mark from the box against 'Turn on a quick start (recommended) '.  Click on the button Save the settings, and then close the open windows and restart the laptop.

  When windows has reloaded, download the driver directly from Intel IMEI on the following link, unzip the and run the installer.

  https://Downloadcenter.Intel.com/download/26127/Intel-management-engine-consumer-driver-for-Intel-nu...

  Once the installation is complete, restart the laptop.

  When the machine rebooted, re - activate the quick start and restart the computer once more - let Windows take over completely for a few minutes before checking.

  Kind regards

  DP - K

• Cannot restart after the update of XP last night (08/13/09)

  Power the computer off last night, he said "stop after installing updates", so I just left the office.
  Is here this morning, the computer will not re-start in safe mode or safe mode with command prompt.
  I get the "Sorry for the inconvenience" screen
  A ran a chkdsk and rebuild bootcfg
  When I try to start in safe mode, it seems to load takes with several lines of things like:
  "multi (0) disk (0) rdisk (0) partition (1) \WINDOWS\system32\ntoskrnl.exe ' etc, etc.
  then hangs just at a black screen with the last few lines of that on it.
  I can get start menu with f8, I can run the retore console, but I can't get a safe mode prompt to try a system restore from there.
  HELP, I'm stuck.

  And Yes, I know it's a Questionmark XP a Vista forum, but I can't find the XP forum.

  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.windowsupdate&cat=en_us_d99bb655-a5d5-4C07-bdb0-90caf9f30c42&lang=en&CR=us

  Microsoft.public.windowsupdate discussions

  Link above is for the focus group you need.

  XP discussion groups:

  http://www.Microsoft.com/windowsxp/expertzone/newsgroups/reader.mspx?DG=Microsoft.public.WindowsXP.General

  Link above is to the XP newsgroups.

  There is a list of groups of discussion XP to the bottom of the left column.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• Applications no longer work after the update of the game store!

  In my Xperia SP applications do not work after the update from the game store and shows 15 times in one minute, unfortunately "Skype/social life/mcafee/chrome, etc." has stopped working while triying to open it. This problem is started, because I updated my phone in 4.3 jelly bean.

  My phone is ok now...

  I contacted the sony Xperia care and suggested a repair.

  And after repairing its great and works without a problem...

  The solution is here...

  Dear Mr. Jab,

  Greetings from support Sony Xperia.

  We sincerely regret the inconvenience.

  We appreciate the importance of your concerns and we are here for you help.
  In response to the request of ypur, we would like to inform to run the reapair software.

  The enforcement procedure to repair your Windows computers using software and application of PC Companion:

  Note! You should always back up all data before you perform a repair of software.

  1. Download PC Companion to sony and install it on your Windows computer.
  2. Turn off the phone and disconnect the computer.
  3. Open the PC Companion application.
  4. Select start under the support area.
  5. Select the software update feature, and then start.
  6. Not found phone is displayed. Select phone repair and Connect.
  7. You will receive a message on PC companion, that data will be lost if you continue.
  8. Check the box to confirm that you have understood that all personal data will be lost. And then click Next. The application prepares the update and if necessary necessary downloads data on the web.
  9. Select your phone model manually, and then click Next.
  10. Depending on the model chosen, you will need to perform a few steps for the update for PC Companion be able to update the phone software.
  11. Yet, do not plug the phone! Note! At this point, the phone must be turned off and disconnected from the computer.
  12. Connect the USB cable to the computer, not on the phone.

  13.Xperia: then just pressed the button indicated, connect the USB cable for device theXperia and keep holding and pressing the indicated key until your device update started... appears (in some cases installation drivers appears first).

  1. If you have not correctly, do the phone turns on and proceed to the next steps, drag the bottom of the convening of the notification bar.
  2. In this case, disconnect the phone from the cable, turn it off and repeat step 12.
  3. Follow the instructions on the screen. Once the repair is completed, unplug the unit and then restart the device.
  4. Click on Next. If the repair was successful, the message this device has been updated successfully is displayed.
  5. Click Finish.

  Please contact the Support of Sony Xperia.

  Looking to better serve you.

  Kind regards.

• After the updates of Windows 7 computer does not start

  I received a notice from the system Windows 7 updates have been downloaded and available for installation. I selected the installation of updates. After the updates when installed I was in charge to restart. The computer will not start at the top. It tries but stops at a blue screen with a cursor. I tried to boot into "safe mode" and get the same. I booted from my original Windows 7 disc and I went back to my restore point before the update. It appeared to restore successfully but I still get a blue screen.
  What is my next course of action? I certainly DON'T want to format the drive and start again.

  The only thing I can say is that I know that you will not like to hear.

  It is to re - install Windows 7 (do not enter the product key and uncheck the 'Activation').

  Then immediately turn off automatic updates.

  Then, go to the Microsoft Update site and only install one update at a time (make a note of the number KBXXXXXX), restart and check that you do not get the blue screen. Then download the next update and repeat the process until you either find to have installed the offending update or updates without any problem. If all goes well and the problem did not repeat, then you can activate Windows.

  If you find yourself always with the blue screen after a given Update call Microsoft and tell them. If they won't listen, then create a new post on this forum, making reference to the question of the blue screen AND the number associated with the update. Also post the number here if I can do some research on the problem.

  JS
  http://www.PAGESTART.com
  Never be afraid to ask. This forum has some of the best people in the world to help.

• Table is the mutation of error in after the update trigger

  Hello
  
  In all of my table, I have columns EDITDATE and EDITUSER. So whenever a table is updated I need to update these two fields with the USER and SYSDATE. For this I use a BEFORE UPDATE trigger. This trigger is activated, but I get "ORA-04091: table %s.%s is changing, function of triggering/can not see" error every time I update the table. I used this method in SQL Server. I understand that Oracle doesn't have to be the same as SQL Server but I do not know there is a way to do this. Do you know what it is?
  
  EDIT: Here is the Code of the trigger
  
  create or replace
  TR_LEGISLATION_CALCUL_AE RELAXATION
  BEFORE THE UPDATE
  ON LEGISLATION_CALCUL
  FOR EACH LINE
  DECLARE
  v_LEGISLATIONCALCULID NUMBER (10,0);
  
  BEGIN
  SELECT: NEW. LEGISLATIONCALCULID
  
  IN v_LEGISLATIONCALCULID
  FROM DUAL;
  UPDATE LEGISLATION_CALCUL
  SET EDITUSER_ID = UID,
  EDITDATE = SYSDATE
  WHERE LEGISLATIONCALCULID = v_LEGISLATIONCALCULID;
  END;
  
  Published by: Mikhail on 12 March 2012 23:54

  Mikhail says:
  Hello

  In all of my table, I have columns EDITDATE and EDITUSER. So whenever a table is updated I need to update these two fields with the USER and SYSDATE. For this I use the AFTER UPDATE trigger. This trigger is activated, but I get "ORA-04091: table %s.%s is changing, function of triggering/can not see" error every time I update the table. I used this method in SQL Server. I understand that Oracle doesn't have to be the same as SQL Server but I do not know there is a way to do this. Do you know what it is?

  EDIT: Here is the Code of the trigger

  create or replace
  TR_LEGISLATION_CALCUL_AE RELAXATION
  BEFORE THE UPDATE
  ON LEGISLATION_CALCUL
  FOR EACH LINE

  just put this in your before update (and not after the update as you mentioned) for each trigger line:

  BEGIN
  
  :new.EDITUSER_ID := UID;
  :new.EDITDATE := SYSDATE;
  
  END;