Satellite L750-1E5 - no sound after upgrade Windows 10

Similar Questions

• Satellite Pro U200 - no sound after installing Windows 7

  Hello

  I have a problem with sound after installing Windows 7 on a (PLUA1E) satellite Pro U200. No Win7 audio driver available on the Nordic pilot site. Help, please.

  G.Magnason

  Hey Buddy,

  Have you already checked the site Web of Toshiba itself?
  http://EU.computers.Toshiba-Europe.com

  I found a driver for Vista 32 bit and Vista drivers most also work on Windows 7 so it s worth a try! :)

• Compaq CQ58: No sound after upgrade Windows 10

  No sound after updating Windows 10.

  Installed HP Support Assistant, which came with a video to try a headphone jack with Windows 7, so no joy there.

  Tried several times scanning but "HP has encountered an error when trying to analyze your product."

  Although this suggests that the failure of the scan, produce a result: Driver (1)

  Under 'pilot', it says "Windows 10 drivers may be available via Windows Update".

  But I already tried Windows Technical Support, who drew a blank and referred me to HP!

  Hello:

  I recommend that you try the audio driver IDT W8.1 support page for your laptop.

  This works in most cases.

  This package contains the driver that allows Audio IDT high definition (HD) in the notebook models that are running a supported operating system.

  File name: sp58406.exe

  If the W8.1 driver does not have the noise at work, try this...

  Go to Device Manager and click to expand the category of audio, video and game controllers device.

  1. click on the Audio CODEC of IDT high definition in Device Manager.

  2. click on the driver tab.

  3. click on Update Driver...

  4-> select Browse my computer for driver software.

  5. Select-> Let pick me from a list of drivers for devices on my computer.

  6. Select Audio device high definition (not IDT high def...)  "This is important). and click Next.

  Warning message is displayed, but the answer Yes.

  7 Windows has updated your driver software.

  8 restart the PC

  Key is step 6

• ENVY Ultrabook 4-1118tu: no sound after upgrade windows 10

  I've updated for windows 10 (probably my first mistake)

  First of all, I got the screen flashing - problem was to restore the computer difficulty settings - this is not the current issue, gives just some information.

  Since then, I've lost ALL SOUND.

  Not only I lost the sound, but I have no devices appearing in the play sounds option more.

  

  After reading several messages forum - it's what I tried

  HARD RESET - no change

  REMOVE IDT high definition codec, restart maching - no change

  Codec IDT high-definition REMOVING, RESTART HARD - no change

  

  Downloaded a file sp63932, it says that it was incompatible

  RUN HP SUPPORT ASSISTANCE, he said that there is no error and no update

  WINDOWS UPDATE - he said that there are no updates

  NO SOUND through speakers or LAPTOP computer (obviously, no audio playback device installed) - no change

  Tried the driver UPDATE, using devices - get the error message in the image

  

  I'd appreciate some help here.

  Have spent about 4 hours on this now and not getting any where - would just have the back of his.  ;(

  Thank you

  Erin

  Hi, Erin:

  Two other members of the forum lost sound on a computer desktop and laptop PC with the IDT audio controller after upgrading to W10.

  What has worked for them was to install the audio driver IDT W8.1 support their PC and driver page.

  It's the support page for your laptop.

  This package contains the driver that allows Audio IDT high definition (HD) in the notebook models that are running a supported operating system.

  File name: sp60188.exe

• Satellite Pro A10: No sound after upgrade to Windows XP Home SP2

  Hello

  Just use the recovery disks on my Satellite Pro A10, no problem with the sound, and then upgraded to XP Home with SP2, no noise.

  What I've read elsewhere, this is a problem and there seems to be an answer. I spent hours looking for drivers updated without success.

  I have also contacted Toshiba support, after blow and blow that they reported the following driver, 5.12.01.3542, which is the same one that I have already installed and does not work.

  Certainly there must be something out there that works.

  Ant.

  Install the driver of his most recent available FRO this sound chip and perform all the Windows updates available on the Microsoft page!

  Update just the BONES together!
  http://www.update.Microsoft.com/microsoftupdate/v6/default.aspx?ln=en-us

  Notes; You may have to restart the laptop and need to connect to this site several times to get all available patches.

• Satellite M115 - no sound after upgrading Windows XP to Windows 7

  Hi all

  Recently upgraded my Satellite of Windows XP to Windows 7 Enterprise 32-bit. After installation, the high definition Audio Device appears in Device Manager.

  Initially, I had an unknown device listed, but that has been resolved by the installation of the pilot site supervisor password utility from Toshiba. Since then, I have experimented with a number of audio drivers without result. Does anyone have advice?

  I downloaded the Conextant 4.8.0.0 pilots, who are not out during installation by saying "Driver Installation Failed: could not find the device for this driver." So now, I'm sitting here without any noise. It's sad. Please help and I'll give you points.

  -Red

  Hello

  Remove all audio drivers, you have already installed, reboot the laptop and download an audio driver for the Toshiba driver page

  For European models, take a look here:

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

  For Canadians or something like this:

  http://www.CSD.Toshiba.com/

  For the Australian and New Zealand:

  http://www.Toshiba.com.au/

• G6-1103sg: no sound after upgrade Windows 10

  Hello

  yesterday, I upgraded my g6-1103sg to windows 10 pavilion.

  After that the sound card is available, but there is no audio output.

  I tried to uninstall drivers and reinstall, but it did not help

  Can someone help me?

  Hello:

  The only suggestion I can offer would be to try this driver and see if it works on your model...

  This package contains the driver that allows to the Audio IDTHigh-definition (HD) in models of laptops that arerunning an operating system supported.

  File name: sp63555.exe

  If this does not work you can try this...

  1. Select IDT High Definition Audio CODEC on Device Manager.

  2. Select the driver tab.

  3. click on Update Driver... button.

  4-> select Browse my computer for driver software.

  5. Select-> Let pick me from a list of drivers for devices on my computer.

  6. Select Audio device high definition (not IDT high def...)  "This is important). and click Next.

  Warning message is displayed, but the answer Yes.

  7. Windows has updated your driver software.

  8 restart the PC

  Key is step 6.

• Pavilion all-in-one 23 q011a: no sound after upgrade windows 10

  Operating system is window 10, do not know what bit. Sound works well on windows 8 that came with the computer after the upgrade to not win 10 no sound. Reflected on the line and tried to change the bitrate and the speaker on the range. Have reset the computer - still no sound. Thank you

  Have you installed the audio driver Windows 10?

  http://ftp.HP.com/pub/SoftPaq/sp71501-72000/sp71569.exe

  You can find all other 10 Windows drivers available for ytour all-in-One PC at the following ADDRESS.

  http://support.HP.com/au-en/drivers/selfservice/HP-Pavilion-23-all-in-one-desktop-PC-series/7902091/model/7842738#Z7_3054ICK0KGTE30AQO5O3KA30R1

• No sound after upgrade windows 7

  I have no sound on my all-in-one averatec after doing the upgrade. After spending hours on troubleshooting it keeps saying that windows audio and generator endpoint audio windows must work and we're not! OK, I'm at the end of my rope... Help, please!

  Is their a file named "Setup.exe" or "Install.exe" in the 2nd disc?
  If so double click to start the driver install.

  JS
  http://www.PAGESTART.com
  Never be afraid to ask. This forum has some of the best people in the world to help.

• Satellite P10-873 - no sound after reinstalling windows device

  Satellite P10 873 PSP 16th:-not his Device
  Win XP-Home Edition SP2

  Everything was going well until a bad sector on the hard drive. I have Ran Chkdsk /r and re-installed windows.

  In Control Panel/System/Hardware/Device Manager it is a unknown device in the sound,.
  Section of video and games controllers which I think can be unit XT of SRS truesurround.
  also Realtek AC97 sound devices shown as correct and functional.

  Tried to load the audio drivers from the website of Toshiba (sound-s-p10-xp-510005490) and still no audio device

  available from the configuration/sounds and Audio devices Control Panel.
  Got the patch KB888111 from Microsoft and installed, still no luck.

  Any ideas as to what I'm doing wrong please?

  Satellite P10 is old enough laptop model. I have very good experiences with P20. It's almost the same laptop, but a bit bigger. A friend of mine uses P10 for the job and we have installed WXP Pro using all the tricks of the Toshiba support page. The OS is installed two years ago, and the sound still works.

  If you can not get this to work, I recommend you remove all the important data for the D partition or save on an external device and make the clean OS install. It will be interesting to see if the problem persists.

  By the way: is a connected to your laptop satellite external game controller?
  An interesting solution, I found here.

• Satellite P35-S6112 - no sound after installing Windows 7

  I installed Windows 7 on this Satellite P35-S6112 with its Realtek AC97 inside card. The card and the drivers work, but there is no volume. I can hear the sound with a very light helmet. I have uninstalled, reinstalled, attempt to update, but I installed current drivers.

  Troubleshooting has been done and the system reports no problems. I am in desperate need of help here, as my daughter he needs for his college as his other laptop is in the shop. Any help is greatly appreciated!

  Hi precisiononthe8,

  > but there is no volume
  That means you don t have the speaker icon in the toolbar to change the volume? Well, maybe that icon is just disabled and you will have to enable it.

  Right click on the taskbar > properties > taskbar > customize > toggle system icons > Volume. Set this to on speaker icon will be visible right now and you can change the volume.

  Check this box!

• HP TouchSmart Sleekbook ENVY 4: no sound after upgrade Windows 10

  No speakers or headphones are connected.
  Windows Update 10 does not provide an update of speaker
  HP Support Tools does not win 10 drivers.

  Product name: HP ENVY TouchSmart Sleekbook 4
  Serial number: (deleted content)
  Product number: C2K73UA #ABA

  Message from system tray: no speakers or headphones are connected.  Playing Audio Troubleshooter found no solution.
  Windows Update 10 does not provide an update of the speaker.
  HP Support Tools does not win 10 drivers.

  Deleted the two drivers listed under sound Manager devices, but t
  The drivers listed are high Drfinition Audio Device and IDT High Definition Audio CODEC
  The CODEC driver has an icon in the shape of a yellow triangle next to him.
  Updated the CODEC driver results in error:
  Windows encountered a problem installing the software driver for your device
  Windows found driver software for your device but encountered an error trying to install it.
  IDT High Definition Audio CODEC

  Machine has 8.1 then updated to 10. Windows 10 has been altered somehow a few weeks after the update. It took Microsoft store and they did a routine repair of Windows 10, which re-installed 10. At this point sound was gone.

  Product name: HP ENVY TouchSmart Sleekbook 4
  Serial number: (deleted content)
  Product number: C2K73UA #ABA

  Recently, I had the same problem. Technical support had me to download the drivers for Windows 8.1 still and my sound returned. The explanation is that not all drivers have been created for Windows 10 again.

• Pavilion slimline 400-034: no sound after upgrade windows 10

  Revently, I upgraded to Windows 10. Now my headphones do not work, there is no sound.  I went to windows web page downloaded all the drivers, uninstalled and reinstalled. I even had a tech guy to do a remote access and try to solve the problem.  He couldn't fix. He always says 'no audio devices installed.  I don't know what to try next... Help?  Thank you

  Hello:

  See if it works...

  Run IDT W8.1 audio driver. If she gets the audio, work great.

  This package provides the driver for the solutions Audio IDT high definition in the supported models that are running an operating system supported.

  File name: sp63932.exe

  Otherwise:

  See this thread.

  http://answers.Microsoft.com/en-us/Insider/Forum/insider_wintp-insider_devices/IDT-high-definition-audio-codec-not-working-on/570a5038-e48e-43F3-af75-95da61447c87?auth=1

  1. Select IDT High Definition Audio CODEC on Device Manager.

  2. Select the driver tab.

  3. click on Update Driver... button.

  4. Select-> Browse my computer for driver software.

  5. Select-> let me pick from a list of drivers for devices on my computer.

  6. Select Audio device high definition (not IDT high def...)  "This is important). and click Next.

  Warning message is displayed, but the answer Yes.

  7. Windows has updated your driver software.

  Key is step 6.

• Satellite Pro U200 - no sound after reinstalling Windows

  Hi all

  Title of SAA says, I tried a ton of things, been on it for about a week and nothing works. I have the sound with headphones, but I can barely hear it. Anything through speakers.
  Sound was working fine before

  Thanks in advance for any help

  Hey,.

  If you can hear the sound with headphones, make sure that the internal speakers are not on mute and line-out isn't your audio output by default.
  Therefore, check the audio settings of Windows!

  Also, what OS you have installed?

• Satellite A100 (PSAA2E) - no sound after installing Windows XP

  I recently installed XP Pro on my laptop. It was previously running XP Home. Now I have no sound. I downloaded the Realtek drivers on the Toshiba site & also tried different drivers from the Realtek site, all without effect. Realtek sound appears in the Manager of devices as "w.orking correctly. Detached & allowing him to be detected again also has no effect. Any advice is welcome.

  Hi cvaughan,

  Have you installed SP3 for Windows XP? If this isn't the case, you should do it, because it contains important updates for the sound card drivers.

  So to remove the current sound driver, install SP3 and then reinstall the audio driver.

  Check this box!