Donwloading two reports different tabs the same Excel

Similar Questions

• Filters in the way different on the same column

  http://img848.imageshack.us/i/screenshotwjk.PNG/
  
  If you take a look at the screen at the time there is view pivot that has about 10 columns one of them is the type of scene that always contains two values Foster Care child and current CPS, my requirement is if I click on the month column values if the month value is in the category Foster Care child, then he must pass three id filters , id of the person and if she has the current CPS then it must pass two filters case id and month is it possible if say me. I will be very happy if you can help out me.
  
  Thank you

  Already answered.

  Filters in the way different in the same report

• How to take snapshots of two usb camera at the same time

  Hello

  I have a project where I have to take still photos of two usb camera at the same time repeatedly and save the in a particular direcltory. I am received using a camera by using "Camera Grab vi", but I can't make it work with 2 cameras, I use the flat sequence and 2 "Camerra Grab vi: with particular camera in a sequence, but each time when I run the program I get only pic of a camera, its seems a camera dominates the other.»

  Please is it possible to use the two camera simultaneously. Attached are the snapshot of my vi.

  Thank you

  Ankit G

  Looks like you are using the same reference at the same time grabbing the camera. The two camera snaps happen but the second camera clamp is written on the first so it seems alone is slam. Try to run the VI executiong highlighted arbitrary mode (select icon icons four bulb to the right of the button run on the schema). This will allow you to see the data stream. In order to get both of these Snap you'll need separate references. You can try to watch one of our examples in the example Finder OR give you some direction (LabVIEW > help > find examples > Browse tab > Input and Output material > IMAQdx > high level > Snap.vi). You can break the two cameras at the same time if you just copy this code and double of the code.
  (Note: If you change the examples, always save as copy in another location so that you do not save on the packed example)

• Trigger two FPGA instances at the same time

  I have a basic FPGA code that transmits the bits of data on a serial (RS-485) bus, the code is written so that it expects in the first State of a machine to States in a single-cycle timed loop.  After a certain trigger, he begins to read a FIFO containing data and sends the data on a line of Tx.  It does this until all bits are send and then it goes back to the first State to wait for the next trigger.  The relaxation is necessary because windows must fill out first before the FPGA FIFO can start sending.

  I need two instances of this code runs, because I have two buses of com (one is redundant).  So I use the FPGA code as a Subvi and I wrote a main FPGA vi to call two separate instances of the Subvi in parallel.  A regular window vi wrote on the FIFO for bed FIFO for Rx and Tx.  No problems so far.

  The thing is I start two transmissions in 200nS of each other (Yes, nanoseconds).  Windows will write two FIFO in parallel, but the timing is 4uS apart, too long.  I tried implementing a Boolean flag in the Subvi FPGA, but windows can not write directly on the control of Subvi.  FPGA won't allow (the Write function is grayed out).  I tried to use a FIFO for a flag, but the problem is a race condition.  One of the instances is first read FIFO and he destroy.  The other can't read.  I need a common trigger point to be used by the two instances of Subvi.

  My final solution was to use a memory in the Subvi FPGA and digital control in the main FPGA vi.  Windows write in numerical order, it may because the control is in the main FPGA vi.  Inside the main FPGA, I run a timed loop that looks for digital to be zero.  If so, it writes the value into the location of the memory used by the Subvi FPGA.  After awhile, the principal wrote a zero back to memory to prevent the Subvi is restarted, as well as to write a zero for digital to reset.  This repeats, waiting for windows to write in digital again for the next transmission.

  I had to do it this way because sometimes I want to pass on the bus, and sometimes just one or the other.  Numeric values are used to determine which to pass on.  Now, the transmissions are starting to almost exactly at the same time, 1 or 2 nanoseconds apart.  But the trigger process seems very silly to me.  I was wondering if there is a better solution.  I'm pretty new to FPGA.

  tbob wrote:

  Basically, I did the same thing using FPGA memory.  Windows I am writing for a digital control that resides inside the main FPGA vi.  In the main FPGA, I write in the memory.  Inside the Subvi FPGA, I read the brief and decode the value to use either one or the other or both buses.  After fool with it for awhile, because reading Memeory needs to use a shift register (probably because it takes a whole cycle of clock), I had to work.  The two bus trigger at the same time.  I guess it's not really important if I use a FIFO or if I use the memory.  The main problem is that I write Windows at the hand of FPGA, then the hand of FPGA for the Subvi FPGA.  Then the time is right for what is the Subvi is.

  There are some advantages to the use of two FIFO on your approach.  First of all, you don't have the change of register for the memory location.  Secondly, we should not worry that VI is responsible for compensation to the memory location, or do, you run the risk that one of your subVIs run twice, or not at all, if the memory is not erased at the right time.  Perhaps most important, you'll save yourself space on the FPGA because you will not need arbitration - the additional code that is added when two parts of the FPGA try to access the same resource at the same time.  In your case, both instances of the Subvi access the memory block at the same time, so the FPGA compiler adds additional logic to avoid conflict.  If only read you the memory block in one place and just write it in one place (reading and writing can be different loops where subVIs) there is no need for arbitration.  Using two FIFOs, you can keep independent and avoid the conflict resolution code.  See the help for the "arbitration" for more details.

• two or more of the same connected printer?

  Got my new OfficeJet Pro 8630 a few days ago and installed on Windows 7 x 64 as a seamless wireless network printer.

  Last night, I noticed the 'install the device driver' dialog box pop up Windows. Since then, the HP utility 8630 informs me that I have 'two or more of the same printer connected' and asked me to choose:

  "HP Office Jet Pro 8630 (network)", and

  "HP9D41EB (HP Officejet Pro 8630.

  The first shows all the data that must be there when the HP utility appears (print, scan, fax); the second shows only the news 'Print '.

  In the window 'Printers and devices' CP, there is always only ONE printer, illustrated by default, named "HP9D41EB (HP Officejet Pro 8630".

  How can I get rid of the bad? I don't want to put my Windows Setup through uninstall and reinstall everything. I saw messages on this topic with different printers HP in Win 7 since at least 2011. Y at - it an explanation and a solution?

  Thank you

  JW

  It's what worked:

  I noticed that the name of the printer in the Windows "Devices and printers" was one of the two who gave information "printing" in the HP utility, so I clicked and was removed in "Devices and printers", leaving no HP printer at all.

  Then when I went back to the HP utility, it showed NO printer, but had returned to "connect A new printer. I did and it works very well - only one instance that shows the print, fax and scan as it should.

  Looks like Windows itself wants to detect the printer via a different driver.

  Thank you

  JW

• You can have two stored functions with the same name?

  Hi all

  You can have two stored functions with the same name?

  My version of DB - connected to Oracle Database 11g Enterprise Edition Release 11.2.0.1.0

  Thank you.

  You can have the same name as long as they are within a package and with different parameters

  create or replace package test_pkg

  as

  function my_func (p1 in number)

  return number;

  function my_func (at number p1, p2)

  return number;

  end test_pkg;

  /

  create or replace package body test_pkg

  as

  function my_func (p1 in number)

  Return number

  as

  Start

  return 0;

  end;

  function my_func (at number p1, p2)

  Return number

  as

  Start

  return 0;

  end;

  end test_pkg;

  /

• Same colors that appear different in the same document

  I have a document where I filled the cells of a different picture of the same RGB color. However, they sometimes appear as two different shades, one darker than the other. I checked that it was the same RGB color and it was, but it looks quite different in InDesign and when I export to PDF. No idea why the same color is different in the same document?

  Full transparency on the page causes ID display a preview of the m slipped preview overprinting is enabled, so it can have an effect on the color, but I expect the change affects the spread.  Monitors fault may also have to backlight uneven which would cause this kind of change of color on a screen, but you will see areas of displacement remain in the same positions on the screen when you rotate the page, rather than rotate with the page if the problem is in the file.

• Two displayed like device the same ISCSI LUN? I'm very confused...

  Hello

  I have a little problem that I can't get my head around. I have two ISCSI Thecus SAN devices on two separate subnets.

  Thecus1 is on 192.168.17.155 and Thecus2 on 192.168.18.156

  I added both in the SW initiator but one show in the storage view.

  When I look in the devices it shows a single disc, but when I look in the paths - it shows two.

  It seems that vmware is the same device two separate paths for a reason any. Where it should show two separate devices and a path to each! Does anyone have anyone pointers or advice to help? I just can't get my head around it all. Ive restarted it this way. I think that the thecus runs some open

  source ISCSI stuff under the hood, but that really shouldn't affect what I do not. These boxes are marked 'VMWare ready' show should be compatible. I contacted Thecus support but they isn't much use. When I look on the thecus iscsi targets I see the attached both esx host. I would add also, I have two hosts, both with the same problem. Each thecus has received a different logical unit number ID, we have 1 and 4.

  Gahh... I hope it's something obvious I've missed.

  

  

  Your table exports the two volumes with the same UUID (WWN) so ESX think it's the same volume via different paths.

  Your provider of storage have you will tell how to fix this.

• two elements that have the same source

  Hi guys,.
  
  I am trying to use the display on a Google Map plugin location. As I had this plugin requires two elements that have the same source:
  
  Article 1 - A text to insert the value (address) in the database. The source of this question would be 'MAP' column.
  2 - Google Map plugin ELEMENT to visualize on the map. The source of this issue should also be "Map" the column that is used to read the address.
  
  But the problem, as you saw, we can not create a new record if we have two items with the same source. How can I get around this?
  
  Here is the link to the plugin:
  
  http://Apex.Oracle.com/pls/Apex/f?p=plugins:LOCATION_MAP:2943553726537511
  
  Kind regards
  Fateh
  
  Published by: Fateh July 21, 2011 02:52

  Hi Fateh,

  Tried the plugin you mentioned! Had a preview of your problem.
  >
  I am trying to use the display on a Google Map plugin location. As I had this plugin requires two elements that have the same source
  >
  As your form seems to be running automatic process line processing DML that will obviously give an error if you have two items
  with the same source i.e. 'MAP' that is your database column.
  >
  Article 1 - A text to insert the value (address) in the database. The source of this question would be 'MAP' column.
  >
  I think that this point is already with you as you may have created form based on a Table or form and report based on a Table.
  Leave the source of this article because it's IE card - the database column.
  >
  2 - Google Map plugin ELEMENT to visualize on the map.
  >
  Change the source of this article as:
  Source type: static assignment (value corresponds to the source attribute)
  Source of value or expression:

  &P1_ADDRESS.
  

  Where P1_ADDRESS is the element:
  >
  Article 1 - A text to insert the value (address) in the database. The source of this question would be 'MAP' column.
  >

  I hope that helps!
  Kind regards
  Kiran

• IMessage Apple Watch has two interviews separated with the same person?

  My new Apple Watch has a problem with iMessage and I know how to fix this on my iPhone but not watch?

  On my iPhone, that my ID apple is connected to more than 10 devices and sometimes when a new device is added, it adds the addresses on my apple for iMessage and FaceTime ID and I always fix by unchecking the addresses that I don't want in the application settings under "Messages" and "FaceTime." However, this isn't the same thing to watch because there is no option in the settings on the Apple Watch and the watch App on my iPhone.

  I would like to help please?

  Hello

  Apple Watch uses the same parameters (for how you can be reached and how new conversations are started) for Messages as your iPhone.

  If you have two interviews separated with the same person, the following steps may help:

  • On your iPhone, check if there is more than one contact form in Contacts of this person (if so, remove duplicates).
  • Delete old Messages conversations with this contact on each of your iPhone and watch:
    • iPhone: app Messages > swipe to the left on a message thread > delete.
    • View: Open the Messages app (from the home screen, which is accessible by pressing the digital Crown) > swipe to the left on a message thread > tap on Trash / delete.
  • On your iPhone in the app Watch: Watch My > general > reset > press reset sync data:
    • You won't see anything happen after pressing it (the process runs in the background, invisible to the user).
    • Leave a minute or two to allow the course ends.
  • Restart your iPhone and your watch (turn the two together off the coast, then restart your iPhone first):
    • Restart your iPhone, iPad or iPod touch - Apple Support

    • Restart your Apple Watch - Apple Support

• I have 2 phones on my ID Apple how can I keep the two devices to receive the same iMessages?

  I have 2 phones on my ID Apple how can I keep the two devices to receive the same iMessages?

  How to use several devices iPhone, iPad or iPod with a computer

  Using more an iDevice on the same computer

  This mainly applies to couples who add another device and don't want their electronic mail, messages, etc. being duplicated on both devices. To start reading: How to use several iPhone, iPad or iPod devices with one computer. You must create a login separate Apple and password for anyone who will use the new iDevice. See Apple - my Apple ID and frequently asked questions about the Apple ID. The easiest way is to do it on the computer using iTunes: iTunes - how to set up an Apple ID iTunes.

  On the computer, create a new user account for the person with the new iDevice. This is the user account always uses this person. He or she will no longer use the other user account. This way the person will have a separate iTunes library. Note When finished, do not 'share' apps under a single Apple ID. Each of you must buy your own applications under your own Apple ID. When you decide to divide like this you will have to buy new applications they want to use.

  First, transfer the new devices to a new account as well as all your data.  Save pictures of flow picture you want to keep for your camera (unless they are already in the camera roll) by opening your Photos app, tap Albums icon at the bottom. Now press the album My Photo Stream; Press Select; tap the photo you want to select. tap the share (box with the face up arrow) in the lower left corner icon; in the film, and then click Save.

  If you synchronize notes with iCloud, you want to keep, you must open each of your notes and email it to yourself. Later, you can copy and paste the text into the new notes created in your new account.

  Tap Settings > iCloud > remove account (removes it only from this device, not iCloud; the person who maintains the current account is not affected) provide the password to disable find my phone and choose to keep on my iDevice when prompted.  Sign in with another Apple ID to create your new account. Choose merge to download your data.

  Once you are on separate accounts, you can each go to icloud.com and remove data from the other person to your account.

  The above was created by the user randers4. Changes were made to improve the readability and the syntax.

• How can I work with two icloud ID on the same pc?

  How can I work with two icloud ID on the same pc?

  Define "work".

  What exactly do you want to accomplish?

  You can use the iCloud Panel to connect to iCloud account and use a browser to go to icloud.com and sign in with another account.

• Two tasks that share the same resource in sequence

  I'm the current exception "the specified resource is reserved.". I understand that you can not run two tasks that share the same resource at the same time. However, is it true that you can not run two tasks that share the same resource, one right after the other, without the eliminate completely from the first task?

  for example

  Task1 and task2 share the same resource
  
  Task1. Start();
  
  Task1. Stop();
  
  Task2. Start(); This will always throw an exception until you have a task1 (i.e. task1.) Dispose()?
  
  Task2. Stop();

  Hi cafarm,

  You're right, the fact to just stop at one task does not allow that run you another task with the same resources immediately after. That being said, you can start the next task without having to erase or dispose of the first by making use of the task status template DAQmx. As you can see on the next page, stop a task simply going to the State of "Clerks", which means that the material is still used by the task even if she does not actively.

  http://zone.NI.com/reference/en-XX/help/370466AC-01/mxcncpts/taskstatemodel/

  Instead, you can use the control functionality of task for the first task of transition to the status "verified" after stopping it, then start the second task. This keeps the parameters of the task without having to have the task, but it should free up resources to be used by other tasks.
  http://zone.NI.com/reference/en-XX/help/370473H-01/mstudiowebhelp/HTML/verifycommitstartstopdaqtask/

• What happens when two parallel process call the same VI in an FPGA?

  Hi all

  I was wondering, what happens when say two parallel processes call the same Subvi in an FPGA? I think that the FPGA would create two instances of the Subvi, not sure. Any point of view?

  Thank you

  Altras

  I don't know if the FPGA adds any ordinary special, but in LabVIEW rule and in LabVIEW Real-time, a VI by default is not reentrant.  Therefore, a process that is called when it is already in use is blocked and must wait.

  If the VI is reentrant, however, then you have two (or more) for the VI dataspaces, so that each can run independently.

• generation of HTML reports save to the same file VI

  Hi all

  IM creating a sample html report using labview6.1. My question is I want to save my html report file in the current directory where the vi is instead of giving some path like 'C:\Folder1\Folder2\. '... "etc. My intention is to put the VI in a zip file so that I can send it to my friend and when he runs it is easy to find the report from the VI and the report are in the same directory...

  All the methods to do?

  Steve.

  

  Try this